I just finished a bowl and I can see so many things I have done wrong. I will take my laptop to the shop and watch the video as I go. Thanks, Kirk, and Craft Supplies.
To say I am so grateful for your instruction would be an understatement Kirk. I am a self learning woodturner because I do not have the time to benefit from the experience of turners in the local clubs. As a busy New Zealand Dairy farmer it is unfortunately not an option for me. I feel very privaledged that through watching your videos my skill level has gone up ten-fold. I have watched other videos that all seem to prefer the swept back bowl gouges and other grinds on their tools which I tried to emulate without much success. Using the right tools in the manner you so expertly demonstrate has made my woodturning projects much more successful. I am still on the learning curve, but far more competent and confident than ever before. Thankyou so much.
another excellent presentation; thank you for your instruction; you are very thorough/alot of good pointers; thank you for your time, effort and devotion to help novice turners like myself to improve our skills
Great video as always, Kirk. Doug and I, and the staff of Loveland Woodcraft, are always looking for videos that we can point customers towards. This one will be a great addition.
I was a manual machinist for 35 years and am now going into wood crafts. After doing the first side, getting ready to turn the bowl around: Thinking as an experienced machinist, I would be inclined to use a magnetic base and a dial indicator to true up the bowl with a soft dead blow mallet with the bowl in the chuck so there is no extra turning required to match the inside of the bowl to the finished outside. If doing it like a machinist, I would firm the jaws medium tight, tap it in, then tighten all the way making sure the back of the bowl is true, then go about it as you do. One way to get the bowl to run more true to start with would be, as a machinist would do, use the tail stock without a point on it to apply equal pressure on the center of the bowl, this forcing the bowl to seat entirely on the face of the chuck, then use the mag base indicator. A magnetic base and dial indicator can be purchased at any machine shop tooling catalog, one being ENCO. This is just what I would do machining a metal part in a chuck that was first turned and needs to be turned around to machine the other side for precision work. In order to indicate the bowl easily, I would turn a flat rim on the outside to make a reference point so the magnetic base and indicator have a convenient flat spot to turn the bowl by hand and keep an eye on the indicator at the same time. I do not know if this would be helpful, it could be excessive, but I have the equipment at home so when I try doing a bowl for the first time, I will video it and share to see if this can make work easier and faster down the process as you so well show us here. Thank you for your detailed presentation. I think I will get my laptop and follow you step by step when I turn that first bowl. It will be a while before I can turn that first smaller bowl because I need to clean up the small Delta lathe I have and get the shop in order before I do this. Thanks again for your excellent presentation.
Nicely done Kirk. You have a nice relaxed but efficient presentation style. You originally said to finish the edge before removing the supportive centre wood??? But you cut the centre deep and ended up with a chattering edge! Just noting. Thanks.
Excellent explanation, learned a lot from this really clear and professional video. (I was a bit surprised to see him turning MDF for his jam chuck with no breathing protection, my doctor warned me that MDF dust is very, very toxic...but I guess he had no option while doing a video or he would not be heard).
Love the video. Always so much to learn from you. Do you use soft woods for the video? I'm working on a Bloodwood salad bowl set & it doesn't respond as easily.
Kirk is mostly using the Henry Tool M42 Stay Sharp tools - but he also uses tools from other brands. There is no "set" for sale, but we do offer discounts if you purchase more than 3 at a time. www.woodturnerscatalog.com/Sales/54/Buy-3-Select-Tools-Save-10-Percent If there is a specific tool you want identified just let us know the timestamp and we can tell you what it is!
I appreciate your cutting and instruction. But please be clear on this... ALL finishes by U.S. Law are food safe after curing. What most turners on TH-cam say... food safe finish... well... they all are. What they mean to say is quick and easy finish... or better yet, easily repairable finish. anyone who gets the bowl and puts some mineral oil back onto it.
Thank you! I love the dry humor but most of all this is the best 101 I have found on the web!! You rock sir!!
I just finished a bowl and I can see so many things I have done wrong. I will take my laptop to the shop and watch the video as I go.
Thanks, Kirk, and Craft Supplies.
T try yàÿok
To say I am so grateful for your instruction would be an understatement Kirk. I am a self learning woodturner because I do not have the time to benefit from the experience of turners in the local clubs. As a busy New Zealand Dairy farmer it is unfortunately not an option for me.
I feel very privaledged that through watching your videos my skill level has gone up ten-fold.
I have watched other videos that all seem to prefer the swept back bowl gouges and other grinds on their tools which I tried to emulate without much success.
Using the right tools in the manner you so expertly demonstrate has made my woodturning projects much more successful.
I am still on the learning curve, but far more competent and confident than ever before.
Thankyou so much.
another excellent presentation; thank you for your instruction; you are very thorough/alot of good pointers; thank you for your time, effort and devotion to help novice turners like myself to improve our skills
Great video as always, Kirk. Doug and I, and the staff of Loveland Woodcraft, are always looking for videos that we can point customers towards. This one will be a great addition.
Thanks guys
Very informative. Clearly described, full of great tips and with understandable explanations. You are an excellent instructor.
I was a manual machinist for 35 years and am now going into wood crafts. After doing the first side, getting ready to turn the bowl around: Thinking as an experienced machinist, I would be inclined to use a magnetic base and a dial indicator to true up the bowl with a soft dead blow mallet with the bowl in the chuck so there is no extra turning required to match the inside of the bowl to the finished outside. If doing it like a machinist, I would firm the jaws medium tight, tap it in, then tighten all the way making sure the back of the bowl is true, then go about it as you do. One way to get the bowl to run more true to start with would be, as a machinist would do, use the tail stock without a point on it to apply equal pressure on the center of the bowl, this forcing the bowl to seat entirely on the face of the chuck, then use the mag base indicator. A magnetic base and dial indicator can be purchased at any machine shop tooling catalog, one being ENCO. This is just what I would do machining a metal part in a chuck that was first turned and needs to be turned around to machine the other side for precision work. In order to indicate the bowl easily, I would turn a flat rim on the outside to make a reference point so the magnetic base and indicator have a convenient flat spot to turn the bowl by hand and keep an eye on the indicator at the same time. I do not know if this would be helpful, it could be excessive, but I have the equipment at home so when I try doing a bowl for the first time, I will video it and share to see if this can make work easier and faster down the process as you so well show us here. Thank you for your detailed presentation. I think I will get my laptop and follow you step by step when I turn that first bowl. It will be a while before I can turn that first smaller bowl because I need to clean up the small Delta lathe I have and get the shop in order before I do this. Thanks again for your excellent presentation.
Glad I found your channel. Love the welth of knowledge you share.
Kirk is such a wealth of information! I've learned so much and have enjoyed successfully turning my wood bowl. Thanks so much for sharing!
You are so welcome!
Video was outstanding! Jam Chucking information is the best I’ve seen.
Thanks for another great training session!
Mark
One of the Best videos on the net, Can you provide information on the Electric angel sander. Thanks
I've been turning for many years and enjoy this refresher course.. Thank you
Very nice instructions! One of the best instructors I have seen! Tack you for sharing this 👏
You're welcome - thanks for the review!
Great Job Kirk. You are a true master.
Good instruction/explanations Kirk. How about a video on sharpening
I did get your reply. Thank you for the info, I'll keep plugging away.
Nicely done Kirk. You have a nice relaxed but efficient presentation style. You originally said to finish the edge before removing the supportive centre wood??? But you cut the centre deep and ended up with a chattering edge! Just noting. Thanks.
Excellent explanation, learned a lot from this really clear and professional video. (I was a bit surprised to see him turning MDF for his jam chuck with no breathing protection, my doctor warned me that MDF dust is very, very toxic...but I guess he had no option while doing a video or he would not be heard).
Glad you found it helpful! And that is true - Kirk can't wear a mask when recording, but he always does outside the studio.
Amazing and very informative course. Thanks very much for sharing :)
thankyou so much for all the instructions , I am learning so much.
Thank you for the tips. It will really help me out.
I like the way you explain how to do things on the inside the bile thank you
Glad it was helpful!
This has been VERY educational!
Nice video, I only wish for some even closer shots when he’s explaining the cutting technique as it is hard to see the tool
Very well done. Thanks!
Great lesson!
Beautiful work! Good luck!
Kirk thank you!
Nice ❤❤❤❤❤ so satisfying and relaxing to watch 😌🥰
where did you get that blue drill and mandrel for sanding? LInk?
Well explained, I learned a lot thanks
Love the video. Always so much to learn from you. Do you use soft woods for the video? I'm working on a Bloodwood salad bowl set & it doesn't respond as easily.
No, we used a domestic hardwood - this was turned out of Silver Maple. Bloodwood is harder than maple so it's going to be a little less responsive.
Very enjoyable thank you
Im very new at this but i thought you had to lock up the tail stock unless i missed it
Great video
Thanks
No face shield while turning, and no dust mask while sanding!
Really appreciate your videos; they are very helpful
Why use the skew as a scrapper on the bottom versus a slicing point cut ?
Si vous pouviez me donner des explications en français pour ce bol ce serait super thank you very much bien cordialement
Merci pour la traduction bien cordialement
What brand gouges is he using? Do they sell a set?
Kirk is mostly using the Henry Tool M42 Stay Sharp tools - but he also uses tools from other brands. There is no "set" for sale, but we do offer discounts if you purchase more than 3 at a time. www.woodturnerscatalog.com/Sales/54/Buy-3-Select-Tools-Save-10-Percent
If there is a specific tool you want identified just let us know the timestamp and we can tell you what it is!
Video would be better if there was sound......
Sorry, my son didn't unplug his head phones.......disregard the no sound comment.....
:)
I appreciate your cutting and instruction. But please be clear on this... ALL finishes by U.S. Law are food safe after curing. What most turners on TH-cam say... food safe finish... well... they all are. What they mean to say is quick and easy finish... or better yet, easily repairable finish. anyone who gets the bowl and puts some mineral oil back onto it.
mdf dust is nasty stuff
Le français a disparu