BUDGET MULTITOOL MASTERLIST amzn.to/3Fii42C 00:00 Introduction 01:59 Irwin Vicegrip Multitool amzn.to/3rRVQ4i (BUY ON EBAY FOR BEST PRICE!) 03:48 Roxon Flash S803 amzn.to/3rQcukN 05:01 BiBury 21-in-1 (Outdoor Tool) amzn.to/3tzmQWL 07:26 Roxon Phantom S802 amzn.to/3RXOYNe amzn.to/46KIfdS (ADDON BLADES, ALL SETS) 11:06 SOG Power Litre amzn.to/3rTN1H9 (regularly found Under $50 on EBAY and ALI-EXPRESS) 13:23 Leatherman Bolster & Rev www.leatherman.com/bolster-647.html amzn.to/3txNeAt (rev) 16:20 Bibury 19-in-1 (Wave Clones) amzn.to/3M00G6y 21:11 Ozark Trail Multiforce & Swisstech bit.ly/48K2Qke (Multiforce) a.aliexpress.com/_mPaOdUe 24:05 SOG Powerpint amzn.to/3twtRrh 27:16 Bibury HD / Daicamping DL30 (SURGE clone) amzn.to/493AD8m Full Video th-cam.com/video/teWTatPZh3w/w-d-xo.html 30:55 Conclusion Bit Kits that work with most of these tools: Klein 11-in-1 Nut Driver amzn.to/45z71N8 Klein 11-in-1 Impact Driver amzn.to/45wXlmm Klein 11-in-1 Driver amzn.to/3Qi1wgj Klein 27-in-1 Security Driver amzn.to/46Vgnnz Dewalt 6 in 1 bit set amzn.to/3FgXe3F MOST LISTINGS ON ALI-EXPRESS ARE NOT SHOWN, this is because they tend to change often and the links would quickly no longer work. Have a Multitool or EDC Question? Leave a comment and I may make a video on it! Website: maxlvledc.com Amazon Shop: amzn.to/3B5kJvr Instagram: bit.ly/3zndlKR Facebook: bit.ly/3ITwKWD Email: mle.collab@gmail.com (no links plz, wont click them) Maxlvledc is a channel dedicated to exploring the tools we carry every day. I will be discussing bags, flashlights, knives, multitools, pen, wallets, key organizers, pry tools, functional clothing, watches, electronics, and much more. Because I also love to modify these items, there will be videos on tools such as screwdrivers, pliers, scissor, wrenches, and power tools. I try to read every comment so pls feel free to ask any questions below! Thanks for stopping in! _______________________ Disclaimer I will use affiliate links whenever possible. Using these links allows me to continue to make content for this channel. Thanks so much for your help! #everydaycarry #edc #maxlvledc
What a solid way to support the community not wanting to spend $250 on an arc tomorrow. I love my Garage 005 but I do understand $200+ is too high of a bar for most.
I am really happy you mentioned the Roxon Phantom! I don’t have the money for multi tools but a family member offered to get me a budget friendly tool of my choice for my birthday and after literally 2 months of research I got the Phantom. I use it all the time and it’s amazing. The pliers maybe not be hearty enough for everyone’s needs but they are more than enough for mine. I use the scissors all the time - easily one of my favorite parts. The tanto blade is surprisingly good and also gets tons of use. And the saw is also surprisingly good and has gotten some use. I haven’t used the screwdriver a ton, but it gets the job done when I have. The awl is also useful for awl-y things when I occasionally need it. Between the scissors, knife, and pliers I think the tool is easily worth it’s cost - if those are the things that matter to you at least. Thank you for the great video! 💜
Late comment, but I've been carrying the SOG PowerPint for about 5 years. It's one of the smallest multi-tools i have, except maybe the leatherman micra, maybe? And that is a scissors tool, not a plier. Either way, you will almost forget it is in your pocket. They pretty much have a full capacity plier/cutter head, with compound leverage. The pliers' capacity is the same as much larger multis, with narrower jaw dimensions. It's become the most used multi-tool for me these days. My king sized Powerlock stays in my work bag now, not on my belt. My two cent opinion says, buy one. You will see what I mean. KK
Spare one for the glove box, spare one for the garage, spare one for the emergency kit... there's a lot of good use cases for a cheap-but-competent spare multi-tool stashed here or there, even if you have your higher-quality Regular.
I saw your review on the daicamping DL30 and decided to get one and I want to thank you very much for bringing it to my attention. 30mins after receiving it I ordered a 2nd one for my son for xmas. it is truly awesome. I have a Leatherman Surge Black Ninja edition that i carried for 8yrs and this one is going to be my preferred edc simply because of the screwdriver bits. we will see how it lasts in the long run but it looks and feels great and I could buy 6 of them for what my Surge cost. (no exaggeration)
I personally think the best budget multi tool is picking up a Leatherman on the secondhand market. That’s how I’ve gotten most of mine. I just recently picked up a Rebar and Mini Tool in like new condition for $65 at a local flea market.
I work as a firefighter. I just got a SOG Powerpint after years of carrying a Leatherman. I weat my tool so the pocket clip sits outside my left pants pocket while the tool suts inside of the pocket. I like that as I have nothing dangling outside my pockets when I have to put my gear on, climb, or go through narrow spaces. The tool is so light that I barely even notice it on me. The pliers are very functional. This is a great option for me to have on medical calls (can turn on oxygen cylinders if the oxygen bottle wrench is lost or broken). This tool can also do a good enough job tweaking some of our gas-powered tools on our trucks if needed. Is the Powerpint the greatest multi-tool of all time? No. However, it packs a lot of bang for the buck.
This is FANTASTIC! I lose knives all the time, so budget is a major consideration for an EDC multi-tool. I'm going to watch this through a couple times, pick out a few tools, then watch their dedicated reviews. One (or more) of these will be coming home with me in the near future. Thanks!
@@maxlvledc Oops, after much deliberation (and failing to see your response), I just bought the Powerpint and Bibury HD, lol. I believe they each fit a use case. If the HD holds up decently, I'll likely also get the Bibury 21-in-1 (outdoor). I have a use case for that one as well. I'll still watch your value guide though!
I own the Wave Clone from Bibury (Bibury 19-in-1) and I'm more than happy with this tool. It helped me quite often since I purchased it and I would recommend and buy it again if I ever lose my Bibury.
I love my Multiforce and I have a $20 BIBURY, but I don't like how they don't have detents to lock the handles for when the wire coating gets jammed and you open it and the handles fold. SOG has the compound leverage system instead of the detents, which solves that issue that way. It doesn't happen often but it is a little annoying. For the most part I only notice this issue when old electrical tape leaves the wire sticky and you have to cut the wire end off. That being said, those cheaper multitools are alot of value for the money and I used them alot and will continue to use them. Awesome list and video. 😀
I WATCH A REVIEW ON THE ROXON 803 THAT YOU DID. I BOUGHT IT AND LOVE IT. IT'S MY M-F EDC. THE ONE GREAT THING ABOUT IT THE BLADE IS RAZOR SHARP FROM THE GET GO. HIGHLY RECOMMEND THIS ONE.
My dad wants the Surge clone, BIBURY, since it's cheap, but he can use it to cut roots out of the garden and other backyard tasks. He does have a Leatherman, but refuses to use it like this. This is why I like a cheap multitool as well, but I never thought about cutting roots. I usually grab a axe for that. 😅
I got the Ozark Trails 15 in 1 really heavy metal one for $14.00 the other day. Might not make it anymore. Beefy pliers. Good for outdoor use. I like it better than the Multiforce for some uses.
My personal favorite multi tool is the Gerber Armbar Drive (Slim or non). I had the slim and lost it and then purchased the non slime. I just love it for the size and having just the tools I like without anything I do not need. The slim is slightly more streamline.
I bought the Daicamping DL-30 based upon your recommendation, & I wasn't disappointed. I appreciate the effort you've put into this series, I really like it.
This randomly popped up. This is great as I'm putting together a cheap as possible motorcycle toolset for on the go. The stuff you shouldn't worry about if it gets stolen. Just ordered the daicamping DL1.
I carry a victorinox ranger and a mini vice-grip(if you are rich you can carry the crunch) coupled with a reciprocating saw blade pair(metal+wood). However, vic craftsman may be a better choice due to the small pliers. At first glance these pliers look rubbish. However, its tips meet perfectly and is more robust than the style of mini pliers in nextool mini sailor(and many other models). I find many times where I need an extremely powerful pair of tweezers, yet not needing the the robustness of a needlenose. A note is that I modified the victorinox tweezers to be perfect: I put a piece of sand paper in the jaw and move it to grind one side. Flip the sand paper in short intervals to alternately grind the sides until the tweezers meet at the tip. This, however, dramaticlly increases the surface area that the tweezers pinches, and you will be tempted to push harder because the lack of pressure and friction. This will cause the metal to bend and the tips to spread. To conpensate for this, take a coarse sand paper piece and hold it in the tweezers, move it in direction parallel to the tweezer to create micro "teeth" that grips because of increased friction and decreased surface area. Be sure to not use force though, as the tips will seperate and not hold, a light grip will easily remove hair from your arm if you modified it correctly. This modified tweezers saved me countless times when i need to grip and remove with great precision. Upon seeing the modification of making a slot in vice-grips on your channel, I came up with a very good idea. There is a product called "speedy sticher"(old american brand) that is a heavy fabric stiching awl with auto thread-feeding. This feature a special needle/awl thingy that has a channel(slit) along it the thread passes through when held in a chuck. I figured that I would have a field expedient speedy sticher if i hold that needle in the modified vice grip, with the channel facing the "pin vice" so the thread can flow. Then I will attach a spool of thread to the tensioning bolt via some industrial linking piece. I thought of this because I was thinking of making a " modular mininalistic yet functional kit" that would allow me to produce stuff out of the material i come by(I intend to use it in my travels). I already have "tiny kit for utilizing tin cans", "micro kit for manufacturing woodcraft tools with scrap wood i find", "minimal rigging kit", "small supplies for making packframes and carry-ons", "general tool kit", "mini adhesive, hose clamp, fastener and zipties kit for personal repairs", "pocket hygeine and odd matters kit for common disconfort", "compact pvc tubular unit capable of forming into bucksaw, quick stool, shelfed pack frame, and small tripod". I was developing "cloth material utilization kit" and wanted to include a speedy-sticher for making things like ponchos from canvass or wool wears from old blankets
I agree about the Vic 91mm pliers being more robust than the folding pliers on tools like the LM Squirt, or Nextool Flagship Mini. The reason is that there's no articulation between the head and handles, it literally is a small pair of contiguously made pliers, sticking out of the SAK. Folding multitool pliers are only ever as strong as the join between handle and head. Furthermore it sits better in your hand than something like the Squirt, giving you more control, reach and leverage. I have the Swisschamp in my rotation and it's great. The Craftsman is discontinued and although the Handyman - same as Craftsman but with backtool PHillips instead of corkscrew - did appeal to me, I really like the inline Phillips on the Champ.
On my daicamping dl30, one of the wire cutters had the screw fall out, so I'd recommend adding some blue thread locker to it to keep the wire cutters in place. Other than that, it's a good tool.
I had the same thing happen on my Leatherman Surge. I lost a blade and screw and had to call Leatherman to get a replacement because the replacement blade kit was not available to customers in Canada. they sent me 1 set as a courtesy and said it was a one-time thing. basically don't ask again. so I was pleasantly surprised when i received my daicamping DL30 and it came with a spare set of cutters and tool to remove them!
Great Line Up! Got away from Multitools when I started working on our properties and carrying a tool bag. Recently I started carrying a shoulder bag and have been wanting to add a small selection of tools. I’m going to buy the Bibury 19 in 1 to see how it works for me.
Funny thing is I am back to having the genuine Surge in my EDC+ bag for no nonsense getting things done, plus accessories. So it’s hard to argue with the toolset for under a Benjamin.
I have mixed feelings about the Sog Powerpint. It has good pliers, but the rest of the tools are not up to par: The knife needs to be sharpened, the bottle opener needs to be modified to have a flat screwdriver, the hook needs to be sharpened, the scissors don't cut well, the file on some units it does nothing, etc. I think it's only worth it because there aren't any more pliers-based multitools of that size. I want to love it because is the only multitool that you can modify easily for a lefty. I think a 91mm Victorinox with a Knippex Cobra is a better option.
I'm going to get one of these for my mom. She used to have one that she got gifted a long time ago that she really loved, but it was stolen out of her car when she dropped it off at the mechanic. I'll save up for the Surge clone I think, it seems to have the most robust toolset, and she liked to keep it in the door of her car, so it wont be too big for her.
You know how much I support leatherman in a few last years (go USA!) But. Speaking of the comments. So we all anticipating the Arc release tomorrow and all that hype, you know. I have to say that I have garage 005 and really liked it when I got it. When I've learned about the arc I decided to skip on it mostly bc it has no spring loaded pliers. So, I get emails from LM and so when it got on their website I commented one of the first. I said hey good tool indeed but I want spring loaded pliers on it. That's all I said. Nothing to crazy. Then it asks for your email and sends confirmation. I got emailed and confirmed that me is me. That was like what 4-5 days ago guess what. My freaking commented is still not there. Well one could say what's the big deal. However I believe that transparency is key in today's world. Now not only I doubt that I will buy arc when it comes out but might not support lm as much as I want to. So..now you know. I assume if they see negative comments they just don't post them...
What you said about having one in different locations is exactly the same reason i love these cheaper clones. I have 3 bibury surge clones. One is in my gun range bag, one in my work bag, and the 3rd stays in my car.
I like the Roxon phantom myself, fits good in the hand and allows me to have the boxcutter blade instead of the knife....living in CA it is better to have a CA legal blade in there.
Great list, diacamping DL30 is a great option. I modified my surge before the DL30 came out. My surge was broken , scissors didn't lock (wasn't impressed with the surge scissors anyway) cutters broke. Was looking for replacement parts for the surge when I found the DL30. The cost of the DL30 was less that the repair on my surge was going to be. Plus it came with extra cutters. I've been very happy with it. Not only can I repair it for less but can also replace it for less. Added two 6mm magnets to the bit driver and devised a compact standard 1/4" 40 bit carry. That and some other goodies are on my belt under my shirt at work. (Working in hotel maintenance). My goal is to be able to enter a room and be able to fix most everything with what I have on me. Especially when the guest is the room and I don't want them to have to try to enjoy their stay with a maintenance guy in there making allot of noise. Don't make allot of money. The DL30 is perfect. Often I'll carry two multi tools as they are always in competition. The goat is really shining bright as well as I work through find tuning it.
@@maxlvledc so many wow moments with the goat. The initial tool options and modularity have already made it one of those tools that make it feel like I'm missing something if it's not on my belt when heading to work. Basic tools striking end, 1/4" driver, medium flat, large flat, awl, scissors, serrated & standard blades, saw. Meet or exceed the potential of most multi tools right out the gate. Then the added exacto had been a huge plus. Very much appreciated platform. All we have to do is wait for the new inserts. A t-shank, diamond file, different blade styles, blanks to make the perfect awl or other tools, how about a gut hook, diamond file, serrated blade? And it's removable to sharpen your custom chisel. The potentiallys make my head spin. This tool is going to unfold into a whole new dimension awesome. 3d print scales that hold extra exacto blades. I could go on for hours. Yes the cutters were a problem, yes it's tricky to get just right. But you know all multi tools are tricky to get just right, people just aren't used to having to tweek there tool like is modders. Oh quick tip use a T9 not a 2mm hex to work with the pivot screws, screws are too soft. Anyway, I ask people to support the goat tool project and to be pro innovation, figure it out improve it, and let the wows roll. I have faith in a team with the guts to make a tool like the goat tool. I'll find your email to update you
Can you share the 40 bit carry setup? I just got the bibury surge clone and will be getting a edc setup to replace my wave+ but will continue to carry the flat bits as I need all the options.
There is too few companies who innovate. Some new features came after you did this vid. But it still relevant today. Many big companies improve the classic designs. But small companies do add new features like modularity, pliers/big scissors combo, electric bit driver, etc
I have a Leatherman Wave that I've carried for years and I know the anxiety of knowing you may have lost it. That Bibury may become my new best friend and the Wave can ride in the car, lol.
My biggest gripe about Leatherman is hand pinch. Every time I use my wave I get pinched. Always collecting multitools. Just bought Harborfreight's Gordon multitool, I'm pretty impressed with it. I do like the ones with fire starter, whistle.
I would really love one of these for work because I work in a corrosive environment and it can ruin tools. I kinda ruined an older Wave so I still carry it at work. Also, the SOG powerpint is the only one I carry outside of work because of its size and weight. Love it
just got a powerpint and love the toolset for the size its quite impressive... my only knock is that the tools on the scissor side are much harder to open than the other side. but maybe once it breaks in it will loosen up ? i really did like this list though gets some people in the door without breaking the bank.
Can you recommend any good ways/tools to use for cleaning my multi tool, I have a leather man wave and use it daily but it’s started getting gunked up, I clean it with a old toothbrush and that just moves the dirt.
DONT BUY THE DAICAMPING WAVE CLONE. The one i bought, the scissors broke after one use cutting a piece of twine that was about half a mm thick. I then proceeded to have over a week of back and forth with the seller for a refund before ali express stepped in and gave the full refund.
@@maxlvledc I was just too tempted by the big Scissors I the smaller form. I already have the surge clone from bibury and am really pleased with it! Keep up the good work!
It’s interest you prefer the bibury without replaceable wire cutters. It seems like the steel would be harder on some Leatherman branded wire cutters that they accept.
Biggest thing about these budget multitools is. They do everything a leather man does and if you lose it your not devastated. I can’t even carry my Leatherman for that fear alone. It sits in my car. I’m buying a budget on payday. Thanks for this list!!!
Holy heck, thirdsies!! I love discussing tools of the budget variety, the mid level variety, the high end way too expensive stuff, tools in general give me a tool boner.
I never knew that is what it's called (I am used to it being called a pruning blade, sometimes a gypsum blade), but I had already given up on that. Finding that on the Roxon was nearly enough to convince me to get it. I have some serious doubts about the durability of the exchange mechanism though, so I am holding off for a bit....
@@user-zh4vo1kw1z see that makes me think of reciprocating tool blades. I work in telecom, so we use two, the electricians blade and cable splicer. The electricians blade is like a hawk bill style blade like shown in the video. The cable splicer kind of looks like a barber straight razor with a heavy duty handle.
@@sammyg.3604 I understand. And we do mean the same thing. Trust me its odd to me as well: I'm an arborist by trade and I know no one who uses it to prune. I think it's an imported term from more horticulture amd fruit growing trades. Victorinox has a comparable, but slimmer blade on their gardener, though they call it a grafting blade. I think many trades have a similar knife style (my sister knows it as a hoof cutter for sheep), it's just which one happens to percolate to the mainstream vocabulary
@@user-zh4vo1kw1z Hey, that's actually really cool and it's nice to know. I've had that happen in Sweden when working on Satellites there. Knives from here in the states are very different than there, when talking to co-workers in Sweden.
@@sammyg.3604 part of my fascination with knives is that it can tell you SO much about a culture or place. And sometimes, there's just the sheer randomness of it all. Like how the bee is the symbol of the Laguiole knives cuz it just is. (The best explanation I ever found was "they had to inscribe the locking latch with SOMETHING" or "perhaps they just liked bees")
Does that micro driver work on eyeglass screws? Having something that I can use to tighten my glasses would be nice to have over one of those super cheaply made 2$ glasses specific tools
I was looking for the dual head Swiss tech the one with the wire strippers , do you have a number or search description? I have looked on Alli express and cannot find Love the channel
its not big difference. Someone say that black version is little harder to open pliers at beginning. But on other side that is good thing because its hold 1/4 bit better. I have Powerpint silver for 2 weeks now and thats is my favorite toy.
I like the out of the box thinking on that first one but it seems to be one of the times where having the two items be separate would be better than having them together. The way they mounted the blade really hurts it usefulness because the plier head would get in the way of cutting. IF the blade would have been mounted to where the blade would open the other way and when opened the plier head would be pointed down, that would go a long way.
Great selection of multitools for mods. The SOG pint caught our eye, could do wonders with those pivot gears. Thinking maybe implementing it to our next project, an insulated multitool which includes a laser that can measure distances & temperatures, flashlight etc. We always get some light bulb moment watching your show. Have you ever thought of doing a test on multitools in the fields? Like in the woods in a camping, trekking or survival situation? Cheers mate from Australia.
I couldn't tell from the video and you didn't mention one way or the other. On the knock off leatherman wave version's, do the internal tools lock open? It didn't look like it in the video.
My DL30 has a major issue with the main blade where there a lot of resistance at the pivot and it's impossible to open, but if I loosen the screw slightly it has tons of blade play. None of the other tools on it have this issue. Very sad I got a poor quality one.
BUDGET MULTITOOL MASTERLIST
amzn.to/3Fii42C
00:00 Introduction
01:59 Irwin Vicegrip Multitool
amzn.to/3rRVQ4i
(BUY ON EBAY FOR BEST PRICE!)
03:48 Roxon Flash S803
amzn.to/3rQcukN
05:01 BiBury 21-in-1 (Outdoor Tool)
amzn.to/3tzmQWL
07:26 Roxon Phantom S802
amzn.to/3RXOYNe
amzn.to/46KIfdS (ADDON BLADES, ALL SETS)
11:06 SOG Power Litre
amzn.to/3rTN1H9
(regularly found Under $50 on EBAY and ALI-EXPRESS)
13:23 Leatherman Bolster & Rev
www.leatherman.com/bolster-647.html
amzn.to/3txNeAt (rev)
16:20 Bibury 19-in-1 (Wave Clones)
amzn.to/3M00G6y
21:11 Ozark Trail Multiforce & Swisstech
bit.ly/48K2Qke (Multiforce)
a.aliexpress.com/_mPaOdUe
24:05 SOG Powerpint
amzn.to/3twtRrh
27:16 Bibury HD / Daicamping DL30 (SURGE clone)
amzn.to/493AD8m
Full Video th-cam.com/video/teWTatPZh3w/w-d-xo.html
30:55 Conclusion
Bit Kits that work with most of these tools:
Klein 11-in-1 Nut Driver amzn.to/45z71N8
Klein 11-in-1 Impact Driver amzn.to/45wXlmm
Klein 11-in-1 Driver amzn.to/3Qi1wgj
Klein 27-in-1 Security Driver amzn.to/46Vgnnz
Dewalt 6 in 1 bit set amzn.to/3FgXe3F
MOST LISTINGS ON ALI-EXPRESS ARE NOT SHOWN, this is because they tend to change often and the links would quickly no longer work.
Have a Multitool or EDC Question? Leave a comment and I may make a video on it!
Website: maxlvledc.com
Amazon Shop: amzn.to/3B5kJvr
Instagram: bit.ly/3zndlKR
Facebook: bit.ly/3ITwKWD
Email: mle.collab@gmail.com (no links plz, wont click them)
Maxlvledc is a channel dedicated to exploring the tools we carry every day. I will be discussing bags, flashlights, knives, multitools, pen, wallets, key organizers, pry tools, functional clothing, watches, electronics, and much more. Because I also love to modify these items, there will be videos on tools such as screwdrivers, pliers, scissor, wrenches, and power tools.
I try to read every comment so pls feel free to ask any questions below! Thanks for stopping in!
_______________________
Disclaimer
I will use affiliate links whenever possible. Using these links allows me to continue to make content for this channel. Thanks so much for your help!
#everydaycarry #edc #maxlvledc
What a solid way to support the community not wanting to spend $250 on an arc tomorrow. I love my Garage 005 but I do understand $200+ is too high of a bar for most.
True
I honestly hadn't meant for that coincidence...but yea...
I agree over $200 is to high but dang it I want 1 tho
That ARC looks awesome, buy day-um. $220!
Nice humble brag
I can vouch for Roxon's stuff. Having actually good full size scissors in a multi tool is really underrated
I am really happy you mentioned the Roxon Phantom! I don’t have the money for multi tools but a family member offered to get me a budget friendly tool of my choice for my birthday and after literally 2 months of research I got the Phantom. I use it all the time and it’s amazing. The pliers maybe not be hearty enough for everyone’s needs but they are more than enough for mine. I use the scissors all the time - easily one of my favorite parts. The tanto blade is surprisingly good and also gets tons of use. And the saw is also surprisingly good and has gotten some use. I haven’t used the screwdriver a ton, but it gets the job done when I have. The awl is also useful for awl-y things when I occasionally need it. Between the scissors, knife, and pliers I think the tool is easily worth it’s cost - if those are the things that matter to you at least. Thank you for the great video! 💜
Thanks for this!
I have had the Surge Clone for a few months now, and I have not been gentle with it and it is holding just fine. Value for money it is a no-brainer.
Late comment, but I've been carrying the SOG PowerPint for about 5 years. It's one of the smallest multi-tools i have, except maybe the leatherman micra, maybe? And that is a scissors tool, not a plier. Either way, you will almost forget it is in your pocket. They pretty much have a full capacity plier/cutter head, with compound leverage. The pliers' capacity is the same as much larger multis, with narrower jaw dimensions. It's become the most used multi-tool for me these days. My king sized Powerlock stays in my work bag now, not on my belt.
My two cent opinion says, buy one. You will see what I mean.
KK
Spare one for the glove box, spare one for the garage, spare one for the emergency kit... there's a lot of good use cases for a cheap-but-competent spare multi-tool stashed here or there, even if you have your higher-quality Regular.
I saw your review on the daicamping DL30 and decided to get one and I want to thank you very much for bringing it to my attention. 30mins after receiving it I ordered a 2nd one for my son for xmas. it is truly awesome. I have a Leatherman Surge Black Ninja edition that i carried for 8yrs and this one is going to be my preferred edc simply because of the screwdriver bits. we will see how it lasts in the long run but it looks and feels great and I could buy 6 of them for what my Surge cost. (no exaggeration)
I personally think the best budget multi tool is picking up a Leatherman on the secondhand market. That’s how I’ve gotten most of mine. I just recently picked up a Rebar and Mini Tool in like new condition for $65 at a local flea market.
AS USUAL, FANTASTIC LIST OF BUDGET MULTI-TOOLS. THANK YOU!
I work as a firefighter. I just got a SOG Powerpint after years of carrying a Leatherman. I weat my tool so the pocket clip sits outside my left pants pocket while the tool suts inside of the pocket. I like that as I have nothing dangling outside my pockets when I have to put my gear on, climb, or go through narrow spaces. The tool is so light that I barely even notice it on me. The pliers are very functional. This is a great option for me to have on medical calls (can turn on oxygen cylinders if the oxygen bottle wrench is lost or broken). This tool can also do a good enough job tweaking some of our gas-powered tools on our trucks if needed. Is the Powerpint the greatest multi-tool of all time? No. However, it packs a lot of bang for the buck.
This is FANTASTIC! I lose knives all the time, so budget is a major consideration for an EDC multi-tool. I'm going to watch this through a couple times, pick out a few tools, then watch their dedicated reviews. One (or more) of these will be coming home with me in the near future. Thanks!
You may want to wait, I have a value guide on these coming out next week.
@@maxlvledc Oops, after much deliberation (and failing to see your response), I just bought the Powerpint and Bibury HD, lol. I believe they each fit a use case. If the HD holds up decently, I'll likely also get the Bibury 21-in-1 (outdoor). I have a use case for that one as well. I'll still watch your value guide though!
I own the Wave Clone from Bibury (Bibury 19-in-1) and I'm more than happy with this tool. It helped me quite often since I purchased it and I would recommend and buy it again if I ever lose my Bibury.
I love my Multiforce and I have a $20 BIBURY, but I don't like how they don't have detents to lock the handles for when the wire coating gets jammed and you open it and the handles fold. SOG has the compound leverage system instead of the detents, which solves that issue that way. It doesn't happen often but it is a little annoying. For the most part I only notice this issue when old electrical tape leaves the wire sticky and you have to cut the wire end off. That being said, those cheaper multitools are alot of value for the money and I used them alot and will continue to use them. Awesome list and video. 😀
i own SQT-mq21(wave clone) and it's my first time to have a multi tool cannot afford a leatherman. it's very very useful.
I WATCH A REVIEW ON THE ROXON 803 THAT YOU DID.
I BOUGHT IT AND LOVE IT. IT'S MY M-F EDC. THE ONE GREAT THING ABOUT IT THE BLADE IS RAZOR SHARP FROM THE GET GO. HIGHLY RECOMMEND THIS ONE.
My dad wants the Surge clone, BIBURY, since it's cheap, but he can use it to cut roots out of the garden and other backyard tasks. He does have a Leatherman, but refuses to use it like this. This is why I like a cheap multitool as well, but I never thought about cutting roots. I usually grab a axe for that. 😅
I got the Ozark Trails 15 in 1 really heavy metal one for $14.00 the other day. Might not make it anymore. Beefy pliers. Good for outdoor use. I like it better than the Multiforce for some uses.
My personal favorite multi tool is the Gerber Armbar Drive (Slim or non). I had the slim and lost it and then purchased the non slime. I just love it for the size and having just the tools I like without anything I do not need. The slim is slightly more streamline.
I bought the Daicamping DL-30 based upon your recommendation, & I wasn't disappointed. I appreciate the effort you've put into this series, I really like it.
same here. i second that notion.
I just bought one too but waiting for delivery
This randomly popped up. This is great as I'm putting together a cheap as possible motorcycle toolset for on the go. The stuff you shouldn't worry about if it gets stolen. Just ordered the daicamping DL1.
I carry a victorinox ranger and a mini vice-grip(if you are rich you can carry the crunch) coupled with a reciprocating saw blade pair(metal+wood).
However, vic craftsman may be a better choice due to the small pliers. At first glance these pliers look rubbish. However, its tips meet perfectly and is more robust than the style of mini pliers in nextool mini sailor(and many other models). I find many times where I need an extremely powerful pair of tweezers, yet not needing the the robustness of a needlenose.
A note is that I modified the victorinox tweezers to be perfect: I put a piece of sand paper in the jaw and move it to grind one side. Flip the sand paper in short intervals to alternately grind the sides until the tweezers meet at the tip. This, however, dramaticlly increases the surface area that the tweezers pinches, and you will be tempted to push harder because the lack of pressure and friction. This will cause the metal to bend and the tips to spread. To conpensate for this, take a coarse sand paper piece and hold it in the tweezers, move it in direction parallel to the tweezer to create micro "teeth" that grips because of increased friction and decreased surface area. Be sure to not use force though, as the tips will seperate and not hold, a light grip will easily remove hair from your arm if you modified it correctly. This modified tweezers saved me countless times when i need to grip and remove with great precision.
Upon seeing the modification of making a slot in vice-grips on your channel, I came up with a very good idea. There is a product called "speedy sticher"(old american brand) that is a heavy fabric stiching awl with auto thread-feeding. This feature a special needle/awl thingy that has a channel(slit) along it the thread passes through when held in a chuck. I figured that I would have a field expedient speedy sticher if i hold that needle in the modified vice grip, with the channel facing the "pin vice" so the thread can flow. Then I will attach a spool of thread to the tensioning bolt via some industrial linking piece. I thought of this because I was thinking of making a " modular mininalistic yet functional kit" that would allow me to produce stuff out of the material i come by(I intend to use it in my travels). I already have "tiny kit for utilizing tin cans", "micro kit for manufacturing woodcraft tools with scrap wood i find", "minimal rigging kit", "small supplies for making packframes and carry-ons", "general tool kit", "mini adhesive, hose clamp, fastener and zipties kit for personal repairs", "pocket hygeine and odd matters kit for common disconfort", "compact pvc tubular unit capable of forming into bucksaw, quick stool, shelfed pack frame, and small tripod". I was developing "cloth material utilization kit" and wanted to include a speedy-sticher for making things like ponchos from canvass or wool wears from old blankets
I agree about the Vic 91mm pliers being more robust than the folding pliers on tools like the LM Squirt, or Nextool Flagship Mini. The reason is that there's no articulation between the head and handles, it literally is a small pair of contiguously made pliers, sticking out of the SAK. Folding multitool pliers are only ever as strong as the join between handle and head. Furthermore it sits better in your hand than something like the Squirt, giving you more control, reach and leverage.
I have the Swisschamp in my rotation and it's great. The Craftsman is discontinued and although the Handyman - same as Craftsman but with backtool PHillips instead of corkscrew - did appeal to me, I really like the inline Phillips on the Champ.
On my daicamping dl30, one of the wire cutters had the screw fall out, so I'd recommend adding some blue thread locker to it to keep the wire cutters in place. Other than that, it's a good tool.
I had the same thing happen on my Leatherman Surge. I lost a blade and screw and had to call Leatherman to get a replacement because the replacement blade kit was not available to customers in Canada. they sent me 1 set as a courtesy and said it was a one-time thing. basically don't ask again. so I was pleasantly surprised when i received my daicamping DL30 and it came with a spare set of cutters and tool to remove them!
Great Line Up! Got away from Multitools when I started working on our properties and carrying a tool bag. Recently I started carrying a shoulder bag and have been wanting to add a small selection of tools. I’m going to buy the Bibury 19 in 1 to see how it works for me.
Funny thing is I am back to having the genuine Surge in my EDC+ bag for no nonsense getting things done, plus accessories. So it’s hard to argue with the toolset for under a Benjamin.
half a benjamin in fact. A Grant.
What an awesome video! Thanks for making a video for the budget-minded people. These are all great.
I have mixed feelings about the Sog Powerpint. It has good pliers, but the rest of the tools are not up to par: The knife needs to be sharpened, the bottle opener needs to be modified to have a flat screwdriver, the hook needs to be sharpened, the scissors don't cut well, the file on some units it does nothing, etc. I think it's only worth it because there aren't any more pliers-based multitools of that size.
I want to love it because is the only multitool that you can modify easily for a lefty. I think a 91mm Victorinox with a Knippex Cobra is a better option.
I'm going to get one of these for my mom.
She used to have one that she got gifted a long time ago that she really loved, but it was stolen out of her car when she dropped it off at the mechanic. I'll save up for the Surge clone I think, it seems to have the most robust toolset, and she liked to keep it in the door of her car, so it wont be too big for her.
Interesting find, those Bybury multi tools. I definitely have to research those more. Thanks for the awesome video!!!
Thank you! These tools are probably better for me. I am not on a construction site.
Beautiful country specially, with the leaves changing color
You know how much I support leatherman in a few last years (go USA!) But. Speaking of the comments. So we all anticipating the Arc release tomorrow and all that hype, you know. I have to say that I have garage 005 and really liked it when I got it. When I've learned about the arc I decided to skip on it mostly bc it has no spring loaded pliers. So, I get emails from LM and so when it got on their website I commented one of the first. I said hey good tool indeed but I want spring loaded pliers on it. That's all I said. Nothing to crazy. Then it asks for your email and sends confirmation. I got emailed and confirmed that me is me. That was like what 4-5 days ago guess what. My freaking commented is still not there. Well one could say what's the big deal. However I believe that transparency is key in today's world. Now not only I doubt that I will buy arc when it comes out but might not support lm as much as I want to. So..now you know. I assume if they see negative comments they just don't post them...
Rocktol sk05 29-1 baby!
Ordered my (upgraded =better than) surge clone. $50 !!!!!
Takes ball-detent (klein style) 1/4in bits.
5 yr warranty
(One review stated they broke the pliers! )
Thanks for this great review, a really nice selection of tools and with the budget in mind. And just in time because I’m building a new kit.
What you said about having one in different locations is exactly the same reason i love these cheaper clones. I have 3 bibury surge clones. One is in my gun range bag, one in my work bag, and the 3rd stays in my car.
I like the Roxon phantom myself, fits good in the hand and allows me to have the boxcutter blade instead of the knife....living in CA it is better to have a CA legal blade in there.
Great list, diacamping DL30 is a great option. I modified my surge before the DL30 came out. My surge was broken , scissors didn't lock (wasn't impressed with the surge scissors anyway) cutters broke. Was looking for replacement parts for the surge when I found the DL30. The cost of the DL30 was less that the repair on my surge was going to be. Plus it came with extra cutters. I've been very happy with it. Not only can I repair it for less but can also replace it for less. Added two 6mm magnets to the bit driver and devised a compact standard 1/4" 40 bit carry. That and some other goodies are on my belt under my shirt at work. (Working in hotel maintenance). My goal is to be able to enter a room and be able to fix most everything with what I have on me. Especially when the guest is the room and I don't want them to have to try to enjoy their stay with a maintenance guy in there making allot of noise. Don't make allot of money. The DL30 is perfect. Often I'll carry two multi tools as they are always in competition. The goat is really shining bright as well as I work through find tuning it.
really??!?! liking the goat?? plz keep me updated on both! this is great info!
@@maxlvledc so many wow moments with the goat. The initial tool options and modularity have already made it one of those tools that make it feel like I'm missing something if it's not on my belt when heading to work. Basic tools striking end, 1/4" driver, medium flat, large flat, awl, scissors, serrated & standard blades, saw. Meet or exceed the potential of most multi tools right out the gate. Then the added exacto had been a huge plus. Very much appreciated platform. All we have to do is wait for the new inserts. A t-shank, diamond file, different blade styles, blanks to make the perfect awl or other tools, how about a gut hook, diamond file, serrated blade? And it's removable to sharpen your custom chisel. The potentiallys make my head spin. This tool is going to unfold into a whole new dimension awesome. 3d print scales that hold extra exacto blades. I could go on for hours. Yes the cutters were a problem, yes it's tricky to get just right. But you know all multi tools are tricky to get just right, people just aren't used to having to tweek there tool like is modders. Oh quick tip use a T9 not a 2mm hex to work with the pivot screws, screws are too soft. Anyway, I ask people to support the goat tool project and to be pro innovation, figure it out improve it, and let the wows roll. I have faith in a team with the guts to make a tool like the goat tool. I'll find your email to update you
Can you share the 40 bit carry setup? I just got the bibury surge clone and will be getting a edc setup to replace my wave+ but will continue to carry the flat bits as I need all the options.
There is too few companies who innovate.
Some new features came after you did this vid. But it still relevant today.
Many big companies improve the classic designs. But small companies do add new features like modularity, pliers/big scissors combo, electric bit driver, etc
ive owned half of these. of them, i miss my multiforce and roxon flash the most. ( gave em away as gifts, cuz everyone should carry a multi, dammit! )
I have a Leatherman Wave that I've carried for years and I know the anxiety of knowing you may have lost it. That Bibury may become my new best friend and the Wave can ride in the car, lol.
My biggest gripe about Leatherman is hand pinch. Every time I use my wave I get pinched. Always collecting multitools. Just bought Harborfreight's Gordon multitool, I'm pretty impressed with it. I do like the ones with fire starter, whistle.
Wheres compared to gerber and clones.
I've owned both the rev and bolster and preferred the rev but each their own
I would really love one of these for work because I work in a corrosive environment and it can ruin tools. I kinda ruined an older Wave so I still carry it at work. Also, the SOG powerpint is the only one I carry outside of work because of its size and weight. Love it
Hi, I was wondering. Between Bibury, Sog powerpint and Roxon S802 which do you choose?
Thank you for making these videos. Very informative and well thought out.
Still using the bibury surge clone. Its been taking everything i throw at it at work. Think im gonna give a couple out for xmas
i carry a swiss style pocket knife everyday and i don't have much money but i want a needle nose multi tool
Nice list! Surprised to see that nextool didn't make it. Really enjoyed edcing the mini flagship for about a year before the spring broke
the non-locking small tools kills them imo.
The Roxxon Phantom is pretty neat.
GOt a few BiBurys and have just got my SIrge copy. Really like
This is an amazing channel! Thank You!
ROXON S502 looks nice, ordered one recently
Leatherman Juice XE6 when I got it on closeout for $40.
just got a powerpint and love the toolset for the size its quite impressive... my only knock is that the tools on the scissor side are much harder to open than the other side. but maybe once it breaks in it will loosen up ? i really did like this list though gets some people in the door without breaking the bank.
It's relatively easy to adjust also with a pair of torz
I love the power pint! I'm on my second one because i lost my first one
Great roundup video. Totally agree with the top 2. Would love it it if they would do the DL1 with a T-Shank adapter.
I like the Gerber brand, quality without breaking the bank
Oh! New video! So exciting 💜
Can you recommend any good ways/tools to use for cleaning my multi tool, I have a leather man wave and use it daily but it’s started getting gunked up, I clean it with a old toothbrush and that just moves the dirt.
I did a video on a maintenance kit a while back. may help
th-cam.com/video/z88k1Iu9L0c/w-d-xo.htmlsi=Illef0VrS5o6qkAA
I would want a Roxon Phantom with just the driver kit, scissors and the interchangable blades....probably at
You sold me on the Phantom... thank you
DONT BUY THE DAICAMPING WAVE CLONE. The one i bought, the scissors broke after one use cutting a piece of twine that was about half a mm thick. I then proceeded to have over a week of back and forth with the seller for a refund before ali express stepped in and gave the full refund.
thats why I ALWAYS prefer amazon / bibury. their reputation for good customer service is key.
@@maxlvledc I was just too tempted by the big Scissors I the smaller form. I already have the surge clone from bibury and am really pleased with it! Keep up the good work!
It’s interest you prefer the bibury without replaceable wire cutters. It seems like the steel would be harder on some Leatherman branded wire cutters that they accept.
Biggest thing about these budget multitools is. They do everything a leather man does and if you lose it your not devastated. I can’t even carry my Leatherman for that fear alone. It sits in my car. I’m buying a budget on payday. Thanks for this list!!!
Where does someone get replacement cutters for the 19 in 1? Are they proprietary? Does it come with an extra set?
And if you order now !!! 😅😅😅😅 so hard picking out my first multi flipper tool but rokon or bilberry is on top so far thanks
In south africa, we have something called Terratac and it's super solid
I have the Ozark trail, and I like it more than my leathermans tbh, except the sheath sucks
I have two of those cheap leathermens they work great and if I lost one sure I'd be upset but it won't cost over $100 to replace
Holy heck, thirdsies!! I love discussing tools of the budget variety, the mid level variety, the high end way too expensive stuff, tools in general give me a tool boner.
If the power pint had a saw instead of the sweated blade it would be perfect
how good would a saw be of that length? I cant think of a single thing I'd want it for.
@@maxlvledc I edc one with a saw mainly for sticks to throw for the dogs but I’ve also cut plastic pipe for plumbing etc
I have been looking for an electricians blade for so long, and the scissors are huge compared to others.
I never knew that is what it's called (I am used to it being called a pruning blade, sometimes a gypsum blade), but I had already given up on that.
Finding that on the Roxon was nearly enough to convince me to get it.
I have some serious doubts about the durability of the exchange mechanism though, so I am holding off for a bit....
@@user-zh4vo1kw1z see that makes me think of reciprocating tool blades. I work in telecom, so we use two, the electricians blade and cable splicer. The electricians blade is like a hawk bill style blade like shown in the video. The cable splicer kind of looks like a barber straight razor with a heavy duty handle.
@@sammyg.3604 I understand. And we do mean the same thing. Trust me its odd to me as well: I'm an arborist by trade and I know no one who uses it to prune.
I think it's an imported term from more horticulture amd fruit growing trades. Victorinox has a comparable, but slimmer blade on their gardener, though they call it a grafting blade.
I think many trades have a similar knife style (my sister knows it as a hoof cutter for sheep), it's just which one happens to percolate to the mainstream vocabulary
@@user-zh4vo1kw1z Hey, that's actually really cool and it's nice to know. I've had that happen in Sweden when working on Satellites there. Knives from here in the states are very different than there, when talking to co-workers in Sweden.
@@sammyg.3604 part of my fascination with knives is that it can tell you SO much about a culture or place.
And sometimes, there's just the sheer randomness of it all. Like how the bee is the symbol of the Laguiole knives cuz it just is. (The best explanation I ever found was "they had to inscribe the locking latch with SOMETHING" or "perhaps they just liked bees")
Thank you for yet another informative video. 🙂
Most of my older knives are liner locks. Especially my older Kershaw knives.
what? no comments? First!!!
Haha
Well said max! The best!
Hi, I just purchased a SOG power pint fro Amazon Australia. My cost was AU$ 109.00
I would like to see some of these brands on store shelves
Hey Max, I’m in your neck of the woods right now in West Virginia and I’ll be heading out to Virginia. I’m on my way to the Carolinas.
For the bibury 19 in one where would someone buy the replacement cutters when they wear out?
Does that micro driver work on eyeglass screws? Having something that I can use to tighten my glasses would be nice to have over one of those super cheaply made 2$ glasses specific tools
nope...a little too big imo. you can kind of make it work if you grind it down a bit.
curses! the search continues then.@@maxlvledc
I was looking for the dual head Swiss tech the one with the wire strippers , do you have a number or search description?
I have looked on Alli express and cannot find
Love the channel
No longer available..would never make top 10...to rikity
Is there a difference between the SOG Powerpint in black and silver other than colour?
its not big difference. Someone say that black version is little harder to open pliers at beginning. But on other side that is good thing because its hold 1/4 bit better. I have Powerpint silver for 2 weeks now and thats is my favorite toy.
@@AlexAndAr444thank you 😊
Okay where do you get the Roxon pocket knife with interchangeable blades? Not the Multi-tool but the knife?
that particular knife has been discontinued, they have a new one with G10, but it doesn't one hand very well.
I like the out of the box thinking on that first one but it seems to be one of the times where having the two items be separate would be better than having them together. The way they mounted the blade really hurts it usefulness because the plier head would get in the way of cutting. IF the blade would have been mounted to where the blade would open the other way and when opened the plier head would be pointed down, that would go a long way.
Agreed
I honestly use that tiny tweaker screwdriver every day lol
Great selection of multitools for mods. The SOG pint caught our eye, could do wonders with those pivot gears. Thinking maybe implementing it to our next project, an insulated multitool which includes a laser that can measure distances & temperatures, flashlight etc. We always get some light bulb moment watching your show. Have you ever thought of doing a test on multitools in the fields? Like in the woods in a camping, trekking or survival situation? Cheers mate from Australia.
I try but the busier I get..the less I get out to do that kind of thing...wish I had more time.
I couldn't tell from the video and you didn't mention one way or the other. On the knock off leatherman wave version's, do the internal tools lock open? It didn't look like it in the video.
They do 100%
I was wondering why the Gordon 20 in 1 multitool is not on this list from Harbor freight? Great multi tool! 39,99
Boker espacialist 2 and gadnic 14 in 1 are nice options
Idk im just one of those people that has to have American tools, although i do like the SOG, i wont do it, gotta be USA, but i love your videos.
I wonder why the medium and premium line from Leatherman doesn't have spring loaded
You might as well begin and end with the Daicamping DL30.
Flirted with the idea of getting a skeletool cx for like 3 years now. Can’t make myself pull the trigger
Perhaps you could find one secondhand ?
You like the combo blade ?
Take a look at the Havalon evolve
Bibury sounds good. But leatherman fan boy here would get a bolster if it was sold in uk. 👍
what about bond? its UK legal
Hey man just letting you know I think you added a video to this playlist by accident?
Swisstech is now also available at Wally World
I've been looking into daily carrying a multitool but all of the ones I've seen were too bulky. The powerpint might just be exactly what I need.
leatherman wave+ at king of knives in Australia: $250. surge: $350
great series
My DL30 has a major issue with the main blade where there a lot of resistance at the pivot and it's impossible to open, but if I loosen the screw slightly it has tons of blade play. None of the other tools on it have this issue. Very sad I got a poor quality one.
I'm lucky because from amazon its really fast swap, the DAI camping one is a risk.