1965-1966 Cadillac LS Swap Kit

แชร์
ฝัง
  • เผยแพร่เมื่อ 5 ธ.ค. 2024

ความคิดเห็น • 101

  • @kstevens8384
    @kstevens8384 ปีที่แล้ว +6

    As soon as my 429 has a major issue dumping that thing and will be LS swapping it with this kit for sure

  • @bryanh87
    @bryanh87 ปีที่แล้ว +1

    Thank you for the video! You guys make it look easy! Once i get my floor pans and body work done on my 63 caddy I will be ordering the LS swap kit from you guys!

  • @jerryzkids
    @jerryzkids 2 ปีที่แล้ว +2

    Haven't installed my setup yet, only trial fit.. but I can vouch for the quality of this kit- it is top notch and well done. This video answers any questions you might have about the fitment and alignment of the mounts.

    • @DeviousCustoms
      @DeviousCustoms  2 ปีที่แล้ว +2

      Thank you for the response. Looking forward to seeing your car in the road.

    • @jerryzkids
      @jerryzkids 2 ปีที่แล้ว +1

      @@DeviousCustoms I saw that you updated the cross member, were there any changes to the motor mounts? How would I know which version of cross member I have?

    • @DeviousCustoms
      @DeviousCustoms  2 ปีที่แล้ว +2

      @@jerryzkids crossmember is all the same points just made different for manufacturing. We simplified the motor mounts. Everything is pretty much the same.

  • @maktoom78
    @maktoom78 2 ปีที่แล้ว +1

    Good to see you guys back on TH-cam. Keep up the awesome videos coming. We need more videos for Lincoln continentals

  • @lawjo1978
    @lawjo1978 2 ปีที่แล้ว +1

    Awesome video. Glad to hear about revised the kit working out for the better...

    • @DeviousCustoms
      @DeviousCustoms  2 ปีที่แล้ว +2

      Thank you.

    • @lawjo1978
      @lawjo1978 2 ปีที่แล้ว +1

      @@DeviousCustoms I have a 66 that I'm about to do a swap on as we speak. Would the mounting kit work for a 4L80E?

    • @DeviousCustoms
      @DeviousCustoms  2 ปีที่แล้ว +2

      @@lawjo1978 excellent question. Our kit is designed for the 4l60 so you don’t have to cut the floor. I tell everyone build the 4l60 so it’s rock solid. If you use the 80 you will have to cut the tunnel and do Sheetmetal work.

    • @lawjo1978
      @lawjo1978 2 ปีที่แล้ว +1

      @@DeviousCustoms I don't have an issue cutting the floor and doing the necessary modifications on my car. I plan to lay frame on the old girl. I'm interested in trying out a mounting kit if it can be bought that way.

    • @DeviousCustoms
      @DeviousCustoms  2 ปีที่แล้ว +1

      @@lawjo1978 yes sir we have it that way.

  • @mlmznam
    @mlmznam 10 หลายเดือนก่อน +2

    what about the drive shaft from what car did u guys use or was it custom ?

    • @DeviousCustoms
      @DeviousCustoms  10 หลายเดือนก่อน +1

      We have one made.

  • @deadwaitdesigns
    @deadwaitdesigns ปีที่แล้ว +1

    I'd love to see how you guys ran the exhaust around the steering on the driver side. I've got a small block in mine with similar block hugger headers, and the pipe routing is driving me crazy. I keep looking for a set of rear exit headers, but everything I'm finding would hit the steering box.

  • @brianmcmurtry8190
    @brianmcmurtry8190 ปีที่แล้ว +2

    Need a video like this for the 63-64

  • @reecelong1021
    @reecelong1021 8 หลายเดือนก่อน +1

    Do you have to use specific headers? What would fitment be like with 6.2L & longtubes if possible?

    • @DeviousCustoms
      @DeviousCustoms  8 หลายเดือนก่อน +1

      Cast manifolds that we sell in our kit.

  • @papergatorzfedducca7998
    @papergatorzfedducca7998 2 ปีที่แล้ว +2

    New subscriber I’ve been waiting on this tutorial!!!!🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥

    • @DeviousCustoms
      @DeviousCustoms  ปีที่แล้ว +1

      we don't have them for that but working on them as we speak

  • @clarkinthedark1
    @clarkinthedark1 2 ปีที่แล้ว +1

    This is awesome!

  • @papergatorzfedducca7998
    @papergatorzfedducca7998 2 ปีที่แล้ว +1

    If you have any more info on this build will you please post the videos!!!

  • @ReddickTrucking
    @ReddickTrucking ปีที่แล้ว +1

    I ordered this kit for my 65 about two weeks ago my question is what drive shafts do you use

  • @willingtoncadillable
    @willingtoncadillable 2 ปีที่แล้ว +3

    Hi, Since the 67 frame and drivetrain are identical to 65-66; why will this not work for 67 also?

    • @DeviousCustoms
      @DeviousCustoms  2 ปีที่แล้ว +2

      I haven’t tested in a 67 so therefore I can confirm or deny until I do one.

  • @devantelee3923
    @devantelee3923 ปีที่แล้ว +1

    Typically gm mated the 6.0 with the 4l70 or 4l80 to handle the extra torque so im curious to know if you guys have had any tranny issues with this build? Was thinking about doing this kit in my 66 coupe but was wondering if it's a reliable engine/tranny combo.

    • @DeviousCustoms
      @DeviousCustoms  ปีที่แล้ว +2

      we have the 4l60 built to hold the horsepower. we don't run stock trans missions

  • @fixinstuff9662
    @fixinstuff9662 ปีที่แล้ว +1

    I subscribed since I'm interested in the 64 Cadillac kit. Maybe there will be a video about that.

  • @sons_of_slewfoot_garage
    @sons_of_slewfoot_garage ปีที่แล้ว +1

    About to order the 1800$ kit. I see your using a 60e, will 80e or 6l80 work with this kit?

    • @DeviousCustoms
      @DeviousCustoms  ปีที่แล้ว +2

      4l60 and 65 fit without cutting the floor. Anything else you need to cut.

  • @donatron_789
    @donatron_789 ปีที่แล้ว +1

    Will this motor mount kit work for a 1976 Cadillac El Dorado, front wheel drive.

  • @SweezyDaddy
    @SweezyDaddy ปีที่แล้ว +1

    With this kit if I install an lsa motor will it clear the supercharger?

    • @DeviousCustoms
      @DeviousCustoms  ปีที่แล้ว +1

      No it’s to tall. We do have low profile parts for that. Please give us a shout.

  • @spacedout106
    @spacedout106 ปีที่แล้ว +1

    Is this a k body? I have a 1972 deville im trying to ls swap but finding motor mounts are a pain. Any direction of help?

    • @DeviousCustoms
      @DeviousCustoms  ปีที่แล้ว +2

      I haven’t tried on a 72 so I’m not sure but does work on a 70.

    • @spacedout106
      @spacedout106 ปีที่แล้ว +1

      I did some research and found that my 72 deville is a c-body chassis & 70s the same so this just might work 💪💪💪

  • @donatron_789
    @donatron_789 ปีที่แล้ว +1

    Do you have a kit for a 1976 Cadillac El Dorado. I want to put an LS engine but is front wheel drive. Any ideas

    • @DeviousCustoms
      @DeviousCustoms  ปีที่แล้ว +1

      Sorry I don’t. Never messed with one

  • @ronalddiggins9096
    @ronalddiggins9096 หลายเดือนก่อน

    I have a 62 buick lesabre, is there a kit like this for an LS swap

  • @davidpope6371
    @davidpope6371 2 ปีที่แล้ว +1

    Do you have any knowledge on xx80e transmissions fitting for this year with your kit?

    • @DeviousCustoms
      @DeviousCustoms  2 ปีที่แล้ว +2

      We use the 60 because it has a smaller case the foil 80 will mean you will have to cut the trans tunnel

    • @davidpope6371
      @davidpope6371 2 ปีที่แล้ว +1

      @@DeviousCustoms do you have a mounting system for the 5.7L LS1? It's not listed as an option in this video.

    • @DeviousCustoms
      @DeviousCustoms  2 ปีที่แล้ว +3

      @@davidpope6371 nothing on the lt platform yet.

  • @louiszeigler6869
    @louiszeigler6869 2 หลายเดือนก่อน

    How much are your frames and motor mounts?

  • @UncleE
    @UncleE ปีที่แล้ว +1

    Any kit for 71-75 cadillac

  • @Bad_Side13
    @Bad_Side13 ปีที่แล้ว +1

    I know the kit is for 65-66, but what tweaks need to be done to make it fit a 1967 Deville? Also, your website isn't working. TIA

    • @DeviousCustoms
      @DeviousCustoms  ปีที่แล้ว +1

      It will fit a 67. Just updated and ready

    • @Bad_Side13
      @Bad_Side13 ปีที่แล้ว +1

      @@DeviousCustoms Thank you. I am looking forward to starting my project this spring

  • @jerrynunez3862
    @jerrynunez3862 ปีที่แล้ว +1

    Does this kit work with the 1968 cadillac as well

  • @elane0225
    @elane0225 ปีที่แล้ว +2

    Thank you

  • @noemedina-qw2bz
    @noemedina-qw2bz ปีที่แล้ว +1

    Do this kit fit on a 1968 cupe deville?

    • @DeviousCustoms
      @DeviousCustoms  ปีที่แล้ว +2

      It does not but we have one for a 68. Give us a shout on Monday and get you taken care of

  • @supabeast83
    @supabeast83 ปีที่แล้ว +1

    Will this kit work for my 67 coupe deville?

  • @durty_pictures1086
    @durty_pictures1086 2 ปีที่แล้ว +1

    Is there clearance for a holly carb style sniper efi?

    • @DeviousCustoms
      @DeviousCustoms  2 ปีที่แล้ว +2

      Haven’t tried. To be honest. Quite a bit of room to the hood.

  • @chibinissan
    @chibinissan ปีที่แล้ว +1

    where to get the kit my dad is currently looking for a 6.0 for hes 1966 the 429 (said no more )

  • @rashedalyammahi2158
    @rashedalyammahi2158 2 ปีที่แล้ว +1

    Will this kit fit a 67 coupe De Ville ?

    • @DeviousCustoms
      @DeviousCustoms  2 ปีที่แล้ว +1

      I’m told the chassis is the same but I haven’t had a 67 in to verify.

  • @michaelbenardo5695
    @michaelbenardo5695 7 หลายเดือนก่อน +1

    Scandalous.

  • @allensims3212
    @allensims3212 ปีที่แล้ว +1

    will this kit work on a1970 deville

  • @Kingcadillac816
    @Kingcadillac816 ปีที่แล้ว +1

    Y'all have something for 1984 Fleetwood ht4100 to esclade 6.2l and 6 to 10 speed auto

  • @jc-plotplan1151
    @jc-plotplan1151 ปีที่แล้ว +2

    Please, Make a 1963 Cadi, LS swap tutorial...!!

  • @stonerstoner2682
    @stonerstoner2682 9 หลายเดือนก่อน

    Does this kit fit for a 1979 Cadillac coupe DeVille

  • @franknaiman5219
    @franknaiman5219 11 หลายเดือนก่อน +1

    Do you know anyone that make a kit for a 1989 coupe deville. Car is pristine except needs a new / better motor...tnx

  • @mohamadsuleimankhamis4627
    @mohamadsuleimankhamis4627 ปีที่แล้ว +1

    Nice

  • @dray6867
    @dray6867 2 ปีที่แล้ว +1

    How do i order the kit?

  • @bookrokodil
    @bookrokodil 2 ปีที่แล้ว +1

    you censored the license plate in half the video but didn't in a lot of the closeups . NJ plates

  • @desmondgriffin3924
    @desmondgriffin3924 11 วันที่ผ่านมา

    Would this work on a 69 deville

    • @DeviousCustoms
      @DeviousCustoms  11 วันที่ผ่านมา

      Yes we have a kit for that ❤

  • @chadbutler4257
    @chadbutler4257 2 ปีที่แล้ว +1

    Interested to know how much room there is from the top of the engine block to the hood.

    • @DeviousCustoms
      @DeviousCustoms  2 ปีที่แล้ว +1

      Lots of room. Sorry don’t have a measurement.

  • @morrisrodney19
    @morrisrodney19 2 ปีที่แล้ว +1

    What about a 1967 Cadillac deville I’m trying to do a LS swap

    • @DeviousCustoms
      @DeviousCustoms  2 ปีที่แล้ว +1

      I’m told it’s the same frame as the 66. But I haven’t had one in to confirm. Drop me a email and send pics. Info@deviouscustoms.com

    • @rolandworden5788
      @rolandworden5788 2 ปีที่แล้ว +2

      What was the verdict on the 67, I need a kit as well. Ty lmk

    • @DeviousCustoms
      @DeviousCustoms  2 ปีที่แล้ว +2

      @@rolandworden5788 same as the 66 frame. 👍🏽

    • @morrisrodney19
      @morrisrodney19 2 ปีที่แล้ว +1

      @@DeviousCustoms I’m sorry I have a 71 Cadillac deville

    • @DeviousCustoms
      @DeviousCustoms  2 ปีที่แล้ว +1

      @@morrisrodney19 sorry don’t have a kit for that.

  • @eviljgish9308
    @eviljgish9308 ปีที่แล้ว +1

    I wanna see how you're routing the exhaust pipe with oil pan and remote oil filter there's no dam room on the drivers side .yes I bought the kit

    • @DeviousCustoms
      @DeviousCustoms  ปีที่แล้ว +3

      Very tight. We use two 2.5 tight radios exhaust u bends to get the exhaust out. Oil filter relocation we go up the frame rail to in front of the motor.

  • @mcss1987ss
    @mcss1987ss 2 ปีที่แล้ว +1

    I ordered one of these kits but the transmission crossmember did not fit must be why they made a new design unfortunate for the people that bought the first gen kit.

    • @DeviousCustoms
      @DeviousCustoms  2 ปีที่แล้ว +2

      We changed the crossmember for ease of exhaust and cheaper to manufacture. How ever if you purchased a kit we would be happy to upgraded you to the new crossmember. Please give u a call during business hours and we will get you hooked up.

  • @nonyabidness6492
    @nonyabidness6492 ปีที่แล้ว

    Fire your audio engineer

  • @greenpythonx
    @greenpythonx ปีที่แล้ว +1

    Will this work on a 61 s and s victory?

    • @DeviousCustoms
      @DeviousCustoms  ปีที่แล้ว +1

      Sorry no the frame is different. We are about to release 61-62 as we speak. Stay tuned.