Nice video and workplace there! Intrested I’m the mechanics of these pcps! May have to get a cheap one to play with would worry touching my fx without any experience decent watch tho!
Just watched your video really good ive got a brocock compatto and its loosing all air ive had the regulator changed and soon as i filled it dumped all the air out any ideas on a fix many thanks again and look forward to hearing from you
I've had the bolt on my Concept S6 jam in a way where you could not pull it back and put the bolt in the safty slot. It also will not shoot, like the trigger does not engage. I happed when the clip was stuck from rotation due to a pellet skirt catching. Not sure how to fix it or why it has happened twice. First time sent it out under warranty repair. Now its off warranty and it happened again. Do I need to drain the gun to work on the bolt?
Not looking for a total strip down but need help ,my nephews s6 has drastically lost power and we are un aware why ?? If you can point me in the right direction or give me a clue what an how I need to look for ,ie trouble shooting, be greatly appreciated.
@@airrifletech8085 how do I go about that? Its alien to me this gun, I own a hw100 and I have resealed that etc but I don't like going in blind , but I can't find what im looking for anywhere? Any help would be extremely appreciated and I thank you for the tip re grub screw but were is it?
@@airrifletech8085 yes mate I did but I watched loads of TH-cam on it and also have a airrifle mag with the gun stripped. Which I went over and over an over, a lot. This one I'm blind as can really find much trouble shooting etc on my nephews. 👍
Could you please help me out, any idea why my nephews brockok super 6 has lost power ,,it pushes the pellets out really weakly ??? Any help be greatly appreciated. It doesn't leak air ,but even full it has lost power , it is under the 12lb limit.
Could be many things, check the pellet probe seal, sticky valve, incorrect hammer tension settings, weak spring, transfer port partcly blocked. At full pressure it can be weaker then say at 150bar.
Very informative video. Would like some information on the hammer assembly to adjust the power.
Nice video and workplace there! Intrested I’m the mechanics of these pcps! May have to get a cheap one to play with would worry touching my fx without any experience decent watch tho!
Just watched your video really good ive got a brocock compatto and its loosing all air ive had the regulator changed and soon as i filled it dumped all the air out any ideas on a fix many thanks again and look forward to hearing from you
Hi Lee, if you go the website, you can call me directly. Adam
www.airrifletech.co.uk
I've had the bolt on my Concept S6 jam in a way where you could not pull it back and put the bolt in the safty slot. It also will not shoot, like the trigger does not engage. I happed when the clip was stuck from rotation due to a pellet skirt catching.
Not sure how to fix it or why it has happened twice. First time sent it out under warranty repair. Now its off warranty and it happened again. Do I need to drain the gun to work on the bolt?
Not looking for a total strip down but need help ,my nephews s6 has drastically lost power and we are un aware why ?? If you can point me in the right direction or give me a clue what an how I need to look for ,ie trouble shooting, be greatly appreciated.
Check the grub screw that hits the valve in the hammer hasn't worked loose. Failing that a faulty valve, there isn't much else that goes wrong.
@@airrifletech8085 how do I go about that? Its alien to me this gun, I own a hw100 and I have resealed that etc but I don't like going in blind , but I can't find what im looking for anywhere? Any help would be extremely appreciated and I thank you for the tip re grub screw but were is it?
@@leecoomber3877 well If you can do that to a HW100 then we shouldn't be having this conversation. So basically your looking for a video tutorial
@@airrifletech8085 yes mate I did but I watched loads of TH-cam on it and also have a airrifle mag with the gun stripped. Which I went over and over an over, a lot. This one I'm blind as can really find much trouble shooting etc on my nephews. 👍
When's the next video due, please? I have my rifle in bits and am eager to get to the next stage!
Excellent video with clear instructions.
what part are you wanting help with?
The removal of the exhaust valve would be great, and if possible how to correctly set the striker / hammer assembly, please.
Thanks very much.
JackRoadkill did you get a video of what you asked for
I’m here for that part 5 years later😅
Just realised I've messaged you prior, I'm capable of doing it myself but as I've never done anything with this gun I don't fancy going in blind.?
Could you please help me out, any idea why my nephews brockok super 6 has lost power ,,it pushes the pellets out really weakly ???
Any help be greatly appreciated.
It doesn't leak air ,but even full it has lost power , it is under the 12lb limit.
Could be many things, check the pellet probe seal, sticky valve, incorrect hammer tension settings, weak spring, transfer port partcly blocked. At full pressure it can be weaker then say at 150bar.
@@airrifletech8085 thanks,,it was fine then he didn't use it much ,then when he did firing really weak.
Does that help to narrow it down???
@@leecoomber3877 how are you testing the power?
@@airrifletech8085 you can tell just by firing it
Great explanation.Thanks.
Have you done the next video yet ?
Very good video. This is very similar to my Falcon Prairie B. I wonder if they had anything to do with each other?
Never!ever!apply heat to a pressure vessel, serious injuries could ensue!