FormD T1 V2... Custom Cooled!
ฝัง
- เผยแพร่เมื่อ 10 ก.ย. 2024
- Here's the FormD T1 V2 Custom Loop build. I'll cover the components, nuances of the build process, and how it all works.
Go to my sponsor aura.com/machi... to try 14 days for free and protect yourself from America's fastest-growing crime.
As an Amazon Associate I earn commission from qualifying purchases, thank you for your support of the channel via the product links.
Component Links:
Case: FormD T1 2.0
Motherboard: amzn.to/3uJlVRz
CPU: amzn.to/3ecXzu3
CPU Block: ModUltra Lobo with "Wave" Heatsink Cover
Pump:
Rad: amzn.to/3Eq28ff
Rad fans: amzn.to/3ecXzu3
RAM kit: amzn.to/3JJzGUE
PSU: (This is the link for the white one) amzn.to/3edacFD
GPU Block: amzn.to/3MgHkIV
Fittings: Phanteks Glacier
M.2: amzn.to/3uJTZNw
amzn.to/3OgZFGr
Go to my sponsor aura.com/machinesmore to try 14 days for free and protect yourself from America's fastest-growing crime.
hey do you reply on comments?
I just built a 12700k + 6800xt system but with 2*360 rad in a much larger case, I was debating on going itx but ultimately decided to go with more space. It's alway satisfying seeing a high-end sff, nice build.
who asked?
@@lIlIlIlIlIlIlIlIlI Go to bed, stranger.
@@lIlIlIlIlIlIlIlIlI damn girl you need a midol
This case is so much fun! I did a similar loop in the T1 V2, but with 2 of the new alphacool ST20 slim radiators, the 240mm and the 120mm. Pump block is the Nuovolo Aquanaut, GPU is the Zotac 3070 AMP. Alphacool makes a very short waterblock for this GPU, so you can fit a 120mm radiator next to it with no problem. Water temp while gaming is below 40C, with the fans at only 900 RPM and nearly inaudible. Your videos inspire me a lot, keep on with your excellent work!
question, I have a Nuovolo Aquanaut, and I havd issues with the pump pressure form the pump I got. Which pump did you end up using to match with it?
Laing DDC 4.2 from EK. Had no pressure problems, but filling was a challenge, had to use an external reservoir. But once it is filled, no issues.
@@disco.volante Thanks for that...the bitspower ddc didnt have enough pressure to flow anything, so i was looking at other ones to try.
You should do a video showcasing your build, my man! I'm interested!
Any pictures or Reddit thread on your build? I have a form1d sandwich on order, and I’m planning on almost the exact same thing, but with a 12600 and a 3080fe on an ek waterblock that is very short. Curious how yours turned out.
I just finished my SSUPD based on your guide. Watching this to appreciate the work you done. Thank you!
dude, as someone whos entire channel is so SFF focused you REALLY need to start getting (preferably even making yourself) custom length cables
4090 in NR200 wen
suun
Nice Build!! That looks like it could be a cool case for an external rad and pump comb, then over clock the beast.......(hint, hint)😉
Very nice, thanks for posting! Asus dropping the temp header really just makes getting the strix boards near pointless, it was the reason I initially went with the B550-I but the onboard headers are very limiting - the CPU fan header is locked to cpu temps, and the AIO header locks you out of more granular fan control. I'm definitely going to be picking a Quadro for future use.
@@disco.volante I actually tried to use fan control but wasn't really satisfied as the functionality wasn't significantly more than just using ai suite. It didn't let me create virtual sensors for example which is what I was looking for but maybe I'll give it another shot.
For example compared to an aqua computer Quadro the functionality is just through the roof granted you are paying for it
hey I am trying to build the nr200 inspired by your video. I just have some few questions. I am going to use 12400f, 1 .if I want to use DDR4 do you recommend ASRock B660-ITX or something else. 2. what cooler do you recommend on 12400f 3. will the M.2 heat sink recommended? if, so will it fit in this MB with the GPU right next to it? Thank you.
Do you guys think a 7700x and a 7950xt is possible in this? Everything I'm seeing is using am4 or lesser hardware. Is that the cost of doing business in this case?
Do you still put thermal paste on the proc. with the cold plate? (dumb question).
How is the noise level on that lian li psu...im considering it but heard the wires are really tough to route
Could you let me know which pump did you use? And if that pump could handle an extra 240 side mounted rad?
Hi,
great overview. I have a MSI 4090 SUPRIM Liquid. its got a 240 mm aio,would it fit ?
Rad fans link incorrect
i was just trying to figure out what fans he used and that link kept trolling me XD
found it he says so at 4:20 (blaze it fffffggggg)
This is a nice break from all of the Intel
14th Gen reviews