Thanks so much for showing your tools and skills. Your videos are my goto as I learn this business. In the process of making my skinning machine now modeled quite a bit after yours.
I like that skinning machine. I'd like to build one like it and use it for skinning deer also. I have a couple pieces of that street sign square material out by my garage.
that thing looks like it would help a guy after a hard days trapping,you sure put some time in designing it i can see . nice work and thanks for sharing
Appreciate the measurements. Where did you get tubing (the traffic sign one)? How far out from the main frame did you go out to where the base (clamps) are? How high is it to the upper pulley? And the length of the rebar? This is a GREAT rig!! Kudos to you!! I am making one. Sorry for all the questions :) Have a great season
pensnut08 go to the scrap yard. make the thing a high as you can. keep the clamps and top pulley plumb with each other so it will pull straight. best of luck to ya
Man I need all the measurements for all of it. I’m rewatching the video over and over in this welding shop trying to figure it out. Just don’t want to cut something wrong and it not work
Looks like you have good trapping in your area.I am planning on moving in the near future. Any suggestions on a new location, with good trapping? Best wishes, Sterling
How do I loosen up the free jaw on my new Duke #3 traps, bout half of them don’t move freely. When Im bedding them and want to lift the loose jaw to add some dirt or maybe adjust the pan ect. , the whole trap moves and screws up a solid bedding. Even after waxing , they’re still stiff ? Do I need to file something or drill the hole out near the small end of the jaw or what, any suggestions would be helpful. Watch lots of your videos, very educational and informative/ realistic, appreciate the authenticity.
what is the distance from the base to the post that holds the vise grips, the length of the rebar and the height of the sign post. Thanks for the info.
It's just easier for me to yell at them because its taking so long to get them skinned :).... cool piece of hardware. You should do a fur shed/season update at some point if you get time
![ออกพรรษาน้ำตาหล่น - แอน อรดี [OFFICIAL MV]](http://i.ytimg.com/vi/PFZtOcY9ONA/mqdefault.jpg)
Thanks so much for showing your tools and skills.
Your videos are my goto as I learn this business.
In the process of making my skinning machine now modeled quite a bit after yours.
I built that skinning machine and it works great, I did change the half 3 quarter inch pipe to flat bar. Saves a lot of time.
Excellent skinning contraption that makes the best use of your time and labor. Thanks for sharing the measurements in the video.
I watch all of your videos, and I love watching them. Im new to trapping and handling fur and your videos are so informative and helpful.
Thanks buddy for showing us your setup. I will for sure be making one of those skinning machines. Great job my friend and the best of luck.
no problem.
Very Nice Setup !! 🤗
What is the height of your skinning machine I'm building a new shed and need to know for clearance love your channel learning alot thank you
Freak'in genius! man gotta have one of those!! Looks well engineered. Definitely a necessity for a longliner.
thanks
I like that skinning machine. I'd like to build one like it and use it for skinning deer also. I have a couple pieces of that street sign square material out by my garage.
Thanks so much for your videos! They truly help!
+Clayton Dowless thanks
that thing looks like it would help a guy after a hard days trapping,you sure put some time in designing it i can see . nice work and thanks for sharing
thanks
I love it, the main piece is made out of the same stuff as stop signs, LMAO. Great video
Appreciate the measurements. Where did you get tubing (the traffic sign one)? How far out from the main frame did you go out to where the base (clamps) are? How high is it to the upper pulley? And the length of the rebar?
This is a GREAT rig!! Kudos to you!! I am making one. Sorry for all the questions :) Have a great season
pensnut08 go to the scrap yard. make the thing a high as you can. keep the clamps and top pulley plumb with each other so it will pull straight. best of luck to ya
This is a pretty old video. Have you changed anything since the move or updated and improved the design at all?
What size square tube is that? And how long is the rebar arch at the top? Nice job and love the the videos!
Great Machine going to build me one of those this summer. Good luck on the line.
***** thanks. im sure there are things that could be improved or that you could customize to fit your own personal needs. good luck with your project.
Are those 10” vice grips? Keep up with the awesome videos!
Hello. Can you tell me how the foot hold clamp is attached to up right support?
Man I need all the measurements for all of it. I’m rewatching the video over and over in this welding shop trying to figure it out. Just don’t want to cut something wrong and it not work
Looks like you have good trapping in your area.I am planning on moving in the near future. Any suggestions on a new location, with good trapping? Best wishes, Sterling
great video was wondering is there any special height and clamps to use thanks and good luck in your season
What size vice grips did you use
Love the sign you have that says fire obama
This video really helped me skin out my first coyote didnt turn out the best but it's a start
How do I loosen up the free jaw on my new Duke #3 traps, bout half of them don’t move freely. When Im bedding them and want to lift the loose jaw to add some dirt or maybe adjust the pan ect. , the whole trap moves and screws up a solid bedding. Even after waxing , they’re still stiff ? Do I need to file something or drill the hole out near the small end of the jaw or what, any suggestions would be helpful. Watch lots of your videos, very educational and informative/ realistic, appreciate the authenticity.
Great video! Love your dog in the chair!
Love ur video brother
what is the distance from the base to the post that holds the vise grips, the length of the rebar and the height of the sign post. Thanks for the info.
When you weld the pipe to the vise grips do you smooth off the edges of the pipe to prevent putting holes in the pelt?
Awesome machine CC add a bucket seat and padded vice grips for a redhead lol just joking I’m getting old I need to make one of these
Some thought went into that. I like the vice grip
I'm thinking 3/4" pipe with 1/2" or 3/8" rebar in the grips.
good setup.makes skinning easier
sure does. thanks
Your info was very helpful . Thanks for sharing .
john cole thanks
It's just easier for me to yell at them because its taking so long to get them skinned :).... cool piece of hardware. You should do a fur shed/season update at some point if you get time
thanks.
In action?
Would love to see this skinning machine in use.
NLGhostWolf take a look at this.
th-cam.com/video/fTP-XZtxRSY/w-d-xo.html
i would like to see you use your machine, then i might understand how it works.
stephen pardy sr it’s in every fur handling video except beaver and muskrat
Great setup.
thanks
Really nice machine it looks better than what you can buy
thanks
nice machine mabe show skining criter thanks js
Jon Smith watch his fur handing videos it’s in there
Nice set up!
thank you
Nice, thanks for sharing.
glad you enjoyed
Can we see it in use?
That's real nice keep up the good work.
thanks
I'd like to see a demo
how do you power your winch?
Can we see how it works
good jobs
I should weld my visegrips solid to.
yeah it does help with speed
What brand is your winch? Is it AC or DC power? Thank you.
dthomas913 just a cheap dc atv winch
still the best I've seen
About how high is your ceiling I have barely 8 ft ceiling to work with
Erin Armstrong 9 ft
Badass brother
Should have it a fitter instead of a wood butcher
How tall is the whole machine
+dallas mccain 10'
im just starting trapping and need help i live i louisiana and im not sure were to start im getting traps lures and drivers but idk how to sell my fur
Your state probably has a trappers association. Contact them for info on local sales
Thank you ive been looking and found a place that sells the traps and lures
Damn thats slick!!
BeaverRick thanks
You should copyright the design and manufacturer and sell them .
found it thanks!
loli skinning machine but less bad
how do you power your winch?
+Ej Cosme car battery