I've recently done a change on my '97 Accord, one advantage of the oldies guess, nothing to remove except the fill and drain plugs. And by the by I've tried several different trans oils over the years, Motul, Redline and Royal Purple but as good as these oils are the trans still liked the OEM MTF best. Great video as always, thanks.
GL4 refers to the additive pack. As per BITOG forums; Honda MTF3 is GL4 rated at 6.xx cSt. AC Delco stuff is thicker at 10.xx cSt. The other fluids you mentioned are likely thicker also. Not sure how this translates to shifter feel or gearbox internal protection. I'd stick to the OEM stuff every 30k miles. JMO.
I recently saw a video where you had a type r 2016 and you had a subwoofer in the rear where you were installing the LC2i and an amp and subwoofer to the car where did that enclosure come from? It was on the passenger side rear of the hatch. I have a 2020 ex hatch.
I've recently done a change on my '97 Accord, one advantage of the oldies guess, nothing to remove except the fill and drain plugs. And by the by I've tried several different trans oils over the years, Motul, Redline and Royal Purple but as good as these oils are the trans still liked the OEM MTF best. Great video as always, thanks.
GL4 refers to the additive pack.
As per BITOG forums; Honda MTF3 is GL4 rated at 6.xx cSt. AC Delco stuff is thicker at 10.xx cSt. The other fluids you mentioned are likely thicker also. Not sure how this translates to shifter feel or gearbox internal protection.
I'd stick to the OEM stuff every 30k miles. JMO.
OEM trans fluid always for me on my 21 type R. Works fine and I’m guna flush it every 20-25k miles anyway. I just daily drive it
The proper crush washer for fill and drain are 94109-20000
I recently saw a video where you had a type r 2016 and you had a subwoofer in the rear where you were installing the LC2i and an amp and subwoofer to the car where did that enclosure come from? It was on the passenger side rear of the hatch. I have a 2020 ex hatch.
Good job
Thanks for the video! Question: how long was that extension for your wrench? Looked pretty long. 24 inches?
Sorry I meant if it was 12 inches.