What is the flight time youre able to get with the 1300 and the 1550 mah lipos? Kindly provide the weight of the build without all the fpv stuff, the one which was in your previous video
Nice Video. Really good explanations thx.👍 P.S. You don't need to say 4mm screws, they are metric size so 4mm screws are called M4 for metric 4 mm screws or M3 for metric 3mm screws.
Thank you so much! 🙏🙌 I am referring to the length of the screw when I say "x mm" and not its nominal diameter. Can you point me to the time when I mentioned only the length of a screw without mentioning its dia? 🤔 ps - I am an ME.
Bro which 18650 battery is best for radiomaster pocket, please guide me Abhi Jo mere pass hai usse pocket band ho jaata hai load aate hi and also shown 10.4v in transmitter voltage but how it's possible maximum v is 8.4v for pocket and it shows everytime different voltage
@@GaganV173 There are many versions of the RS2205 motors. There's the original one from Emax and its clone from ReadytoSky. These motors don't look like the aforementioned but they're also coded RS2205 and manufactured by ReadytoSky 😊👍
@@NoobFPVPilot thanks man 🌟. What are your opinions on the gt2205? I am following your LoS build and want it to have a payload capacity of around 300g for carrying out autonomous tasks. I'm thinking of 6 inch 3 blades. Any other suggestions for the motor from your end? The budget is around 1300 per motor
The concept remains the same for all modern flight controllers. Just follow its wiring diagram and you'll be good to go. The f4 pro V3 is an outdated FC and you can get much better FCs nowadays for the same cost but I'll consider your request! 🙌
A small correction - I said "hot start" at 7:29 when I actually meant to say "cold start"
Thank you Bro!
can u provide design link of those 3d printed parts .
@@g_xgaming4011 You may purchase the parts directly from me! Ping me on Instagram if you're interested ✌️
One good thing about the youtuber is he replies to the queries his user has
Bro awesome build, totally love it.❤❤ What flight time you get in this build
@@amirjafari8314 Thank you so much bro! 💯🙌 I get around 3-4 minutes with a full-sized GoPro using a 1550 mAh 4s 100C LiPo 👍
Your solder joints look really good! Which FPV goggles do you use for analog?
Thank you so much mate! I use the Fatshark Recon V1 🙌
Hey, could you make a video about where to buy stuff and explain how they work for beginners?
I'll take it into consideration! 🙌
Great content man. Did you design the 3D prints yourself? The vtx mount is innovative!
Thank you so much for your support 🙌🙏 Yes, I designed them on Fusion360. I've been using this kind of VTx mount on all my builds for optimal cooling 🥶
@@NoobFPVPilot That's awesome bro, I'm still trying to get the hang of fusion...its been tough! I'm looking forward to the next video!✌✌
@@Nastee_FPV Thanks a lot brother! I'm going to up my game with the next video!
Sick build! Dropped a sub!
@@RockyMountainFPV Thanks a lot mate! Like your work too so I did the same 💯🔥
What is the flight time youre able to get with the 1300 and the 1550 mah lipos? Kindly provide the weight of the build without all the fpv stuff, the one which was in your previous video
Brilliant 👌
@@narasimhamurthym3033 Hello uncle! Thank you so much!
Super
@@TamilKathirrgal Thank you!
make a playlist for beginner
Checkout the fpv beginner's guide playlist of Joshua Bardwell! ✌️
@@NoobFPVPilot Thanks bro
Nice Video. Really good explanations thx.👍
P.S. You don't need to say 4mm screws, they are metric size so 4mm screws are called M4 for metric 4 mm screws or M3 for metric 3mm screws.
Thank you so much! 🙏🙌
I am referring to the length of the screw when I say "x mm" and not its nominal diameter. Can you point me to the time when I mentioned only the length of a screw without mentioning its dia? 🤔
ps - I am an ME.
Edit - changed "4 mm" to "x mm"
@@NoobFPVPilot Sry i must have misunderstood in the Video. I watched again and found no flaws. Thx for replying. Keep it up!👍
Hey you are form karnataka
Bro which 18650 battery is best for radiomaster pocket, please guide me
Abhi Jo mere pass hai usse pocket band ho jaata hai load aate hi and also shown 10.4v in transmitter voltage but how it's possible maximum v is 8.4v for pocket and it shows everytime different voltage
@@errorattacker6821 Molicel 2800 mAh lelo bhai best hai 🙌
@@NoobFPVPilot bhai lekin uski c rating 13c hai or high discharge rate hai, so it is suitable for pocket ya fir low c rating wala lena hoga
It doesnt look like that you used the rs2205 motors but you've listed them in the description. Any reasons for this?
@@GaganV173 There are many versions of the RS2205 motors. There's the original one from Emax and its clone from ReadytoSky. These motors don't look like the aforementioned but they're also coded RS2205 and manufactured by ReadytoSky 😊👍
@@NoobFPVPilot thanks man 🌟. What are your opinions on the gt2205? I am following your LoS build and want it to have a payload capacity of around 300g for carrying out autonomous tasks. I'm thinking of 6 inch 3 blades. Any other suggestions for the motor from your end? The budget is around 1300 per motor
Total cost ?
Hello! Only the drone (without the battery) costs around 20,000 rupees.
Bro could you please make a fpv built with f4 pro v3 flight controller please brother.❤ heartiest pleases from you oldest subscriber
The concept remains the same for all modern flight controllers. Just follow its wiring diagram and you'll be good to go. The f4 pro V3 is an outdated FC and you can get much better FCs nowadays for the same cost but I'll consider your request! 🙌
Bro can you tell me that
Can I bus receiver be used instead of s bus receiver? For f4 flight controller.please reply
Yes, it's 100% possible 🙌 Feel free to ping me on Instagram where I can guide you better 👍
Love this video. I would love to collaborate with you if you're interested.
Yes please!
Bro If I was a girl I would fall for your soldering skills🙄🙄
Hahaha! Thanks a lot man! 😂🙌
bro which place did u fly cause i am trying to fly my fpv drone and am new to banglore so need to know where u flew the drone
@@prakulsahukar16 I mostly fly in and around Kithaganur. There are some nice open grounds here!
@@NoobFPVPilot thanks bro
Bro 3d printed parts file link plz
You may directly purchase the parts from me. DM me on Instagram!
💥💥💥💥
Thank you! 🙌