Showcase of some of the best ENB presets here: th-cam.com/video/ofCTHXKZz2U/w-d-xo.html and For a more complete Skyrim visual overhaul check out this video: th-cam.com/video/oC57wgNaL4g/w-d-xo.html
I've been struggling with ENBs for years and I could never figure it out because I never thought to look up tutorials until I started modding MHW seriously. You really are a life saver, thank you for this amazing video, it's saved me from graying early lol. I love how you were straight to the point and actually showed how the mods look and explained how they differ without adding to many words. Keep up the good work!
Although I knew the basics of creation kit and vortex, I've recently got a new pc and have been trying out modding my Skyrim graphics. I am finding it harder than I thought. I have to say I'm impressed by people's accumulated knowledge. I've had a missing texture and I realise I have no idea where the issue arose. Even after examining the ID in xedit and nifskope I have no idea what happened. Who took my dirt cliffs lol? So all you knowledgeable modders... I salute your expertise!
Removing exterior fog also makes a fantastic difference (especially with the issue where distant mountains turn white at sunset, foggy weather, rain, etc.). (FYI console command for this.. setfog 0,999999)
One thing that is often not talked about is how much impact ENBs has on performance, I hope you'll cover that more instead of just simply mentioning it like in this video (like how vanilla enb has the most performance friendly impact compared to the other)
Vanilla enb looks horrible. Also enb performance is incredibly unpredictable since flora and trees increase fps hit of ao and wet effects. As of recently community shaders is better if you cant run enb. It must be said enb is better, you would be better of switching to lower res textures. Like 202X downscale or using mod tools to downscale textures to 2k or 1k. With community shaders though it does leave you at mercy of weather mods more.
The reason why we use the Dynamic display blur effect to so enhance the focus of the area for graphic design and it helps for lower tier pc builds so the GPU doesn’t hard crash.
Every video of yours is way too addictive...The work you're putting is astonishing, i hope your channel will grow so much ! I have an ENB issue i was hoping you or any other kind soul could help me with. I can't for the life of me get the Berserky ENB to work, even though i think i have all the requirements, load order, compatibility, requirements and so on. The problem is that this ENB does't recognize the NAT weather, because in the in game weather ENB tab, it is written "weather file not set". Apparently it could be the ENB helper not functionning properly but i have the latest version installed and it seems to work perfectly when i switch to Rudy Enb for Obsidian Weathers. Any help from you or anyone would immensely be appreciated !
Hi! Many Thanks for all of you’re videos. I very like you’re clean presentations of the mods, that’s helps me a lot to find the right one for me. But one Question. In my case, I used Rudy and it’s very low saturated in the directional comparison with this video. Are you also using some Reshade presets or something? How do you get this very bright, saturation and clean look? Many thanks.
Same, i just gave up. What's funny is that when you trying to "fix" it, you unintentionally make it worse. Spent the whole day to figure it out but no luck, damn it, my nerves already broken
_Damn..._ And I've literally just reinstalled and put in some 200+ mods for Skyrim. _So..._ Now that they are installed, can I still use ENB? Or is it a case of restarting the whole Skyrim list again? _Regardless._ If I do or don't do anything, this is a good, easy to follow, understand and very informative video. So for someone like me who's old _(63.)_ and not that great when it comes to the _little bits of modding (i.e. I'm as thick as a plank of wood!),_ it was great 👍 Also. It'll be interesting to know exactly what other MOD's you were running with ENB installed.
Because I wasn't able to use ReShade on Genshin I fiddled with Nvidia Freestyle till I had settings I liked Sharpen + Intensity 25% Texture Details 25% Color Vibrance 10 Details Sharpen 0% Clarity 100% HDR Toning -100% Bloom 9% Brightness/Contrast Exposure 35% Contrast 35% Highlights 69% Shadows 75% Gamma 0% Genshin in-game brightness settings between the C and the E on the slider Nvidia Control Panel Digital Vibrance 70% Screen brighttness should be at 100% The same settings work with multiple different games (on Diablo I have different settings to make it more darker and atmostphereic)
Off the top of your head, is there anything you might be able to point me to? I chose the Rudy EMB and installed them all via mod organizer2 is this an ini file setting or do I need a secondary file?
@@rohandaniel311 so no it did not look as good as the video but I think it's called vortex and it is a mod manager I believe that will set up all the mods for you and download them because I know that can be confusing. I use Mo2 mod organizer 2 and it will show you if there are conflicts, vortex is something to look at though it works for fallout and Skyrim
Hello Please make a video on How to install Berserkyr ENB. Partical patch shown in this video conflicts with NAT.ENB. Lux is having huge installation steps. Pls give a detailed guide about it.
Each ENB preset will have slightly different options in the settings, it depends on the author. Vibrance is similar to saturation if you have that option
My biggest issue with enb's is that indoors is far to dark. Most of the time you can't see anything, forcing you to either use a torch or fire spell. It is a real shame because the out door areas looks amazing.
IKR, I hate playing in the dark, but it also helps me see better than the daytime to see the visuals of Skyrim better. Is cabbage worth it or rudy ENB?
Under shader parameters, I have all of the default ini settings, but none of the additional settings does any one know how to fix/why this is happening?
Hey Man, thanks for the video! I have a question, I am running a 6700xt with a 2k monitor. Do you think I will be able to run this with 60 fps with the other video you made about the total graphic conversion?
Hey, thanks for the good video! I had a question - how is your ENB GUI pausing the game? Mine doesn't disable player controls or update automatically when I make changes. Is this a setting you changed or is it a mod? Thank you!
Hey man, I love your videos! You use PRT XII, right? So then for your weather are you only using NAT 3.0 as required by PRT XII? I'm trying to figure out how to the the same vibrancy and color like yours. I'm using ENB Cathedral Weathers with the Lite PRT XII that's compatible with all weather mods. I've installed all of your recommendations and game seems to be running decent so far but my enb menu is different and doesn't have the vibrancy feauture
Thank you, your videos are really helpful. Can you tell me hod did you customize the PI-CHO ENB to get those beatiful sunrays effects at 4:22? With all those parameters I can't find the right one.
Thanks for the video. I really want to play with ENB and this awesome presets but I get always the messages that there is still something missing or something that doesn´t fit right in Vortex. It seems to be it is not easy to mod Skyrim actually if you have no clue at all how everything fits together.
@@ghr501able Yep I did. You had to turn off a setting in the enb settings to get rid off the blur. Also I used a mod called enb sharpen or sharpen something something can't remember to make the image crisp
Big thanks for the well explained video, really helpful for me, as I just started to mod my Skyrim just two weeks ago. I have watched several of your other videos to, love them all. Have a nice weekend and greetings from Sweden
when I'm on the ENB site to download the files, there are only option for Skyrim, Skyrim SE, and Skyrim VR, but I am playing the anniversary edition, do I just click the Standard edition download? Thanks in advance!
Hi, nice video but shader parmeters are missing for me who use pi-cho enb (i don't understand because i download the same files as you) it just write "constant" in the shader windows.
@@shamailnasir7960 so depending on which ebb you install it will say for what type of weather mod you have install if you don’t have any by default you’d have to download the vanilla version of the enb pack.
Amazing video..I hardly ever sub to anyone because their tutorials are either too fast or skip certain small (very important) steps. I can't use the enb you are because author has it hidden. Could you send it to me please?
Sorry if I'm wrong, but aren't you supposed to use the binaries that were most up to date when your enb was released? I'm just comming from LE so this may just an outdated issue now.
This video was very useful, thanks a lot. I am unsure tho on how to install the complex grass mod, since it's only download option is manual. If you or someone else could help me out here I would be very thankful
try plugging in a controller (thats what i do) or you can try this mod www.nexusmods.com/skyrimspecialedition/mods/62796 ive never used it so not sure if it works though
I followed your steps which is pretty easy for my low specs brain to follow and it worked... indoor... the moment i step outside the enb helper is not working, my skyrim is version 1.6.1130 and the one nexus is either for version 1.5.97 or 1.6.629 and up, I kinda confused which one should I get, any advice?
Every time I try this I get this “ ENESeries compling shaders, please wait Set Shadercache-true” error. It never starts. I’m a newbie at this. Not sure if you can help me out but great video.👍
when it comes to enb, i always capped the game to 31fps because it feel like a movie for some reason, i dont like it when the game at 60fps with enb, it feels off
Showcase of some of the best ENB presets here: th-cam.com/video/ofCTHXKZz2U/w-d-xo.html
and
For a more complete Skyrim visual overhaul check out this video: th-cam.com/video/oC57wgNaL4g/w-d-xo.html
Are you running on a potato PC?
I've been struggling with ENBs for years and I could never figure it out because I never thought to look up tutorials until I started modding MHW seriously. You really are a life saver, thank you for this amazing video, it's saved me from graying early lol. I love how you were straight to the point and actually showed how the mods look and explained how they differ without adding to many words. Keep up the good work!
Although I knew the basics of creation kit and vortex, I've recently got a new pc and have been trying out modding my Skyrim graphics. I am finding it harder than I thought. I have to say I'm impressed by people's accumulated knowledge. I've had a missing texture and I realise I have no idea where the issue arose. Even after examining the ID in xedit and nifskope I have no idea what happened. Who took my dirt cliffs lol? So all you knowledgeable modders... I salute your expertise!
I took them. I took your dirt cliffs.
Hands down the most comprehensive tutorial for ENB and skyrim.
Thanks for the video, straight to the point explanations, great tips, drops links in description with awesome recommendations. You sir are top tier!
Removing exterior fog also makes a fantastic difference (especially with the issue where distant mountains turn white at sunset, foggy weather, rain, etc.). (FYI console command for this.. setfog 0,999999)
Glad too see that Grim Enb is still ticking. Love a dark fantasy vibe in my games.
That poor wolf :D Seriously though, your vids are extremely helpful for people starting out modding. Kudos on the simplicity of how you explain stuff!
With that blur it's like your character is nearsighted.
It makes me feel like I’m nearsighted
Immersion
@@justincree1611the astigmatism mod
Bruce Lee was nearsighted too xD
@@justincree1611 only usefull for cinematic or video purposes imo
broo the wolf flying away broke me, nice video
One thing that is often not talked about is how much impact ENBs has on performance, I hope you'll cover that more instead of just simply mentioning it like in this video (like how vanilla enb has the most performance friendly impact compared to the other)
Vanilla enb looks horrible. Also enb performance is incredibly unpredictable since flora and trees increase fps hit of ao and wet effects. As of recently community shaders is better if you cant run enb. It must be said enb is better, you would be better of switching to lower res textures. Like 202X downscale or using mod tools to downscale textures to 2k or 1k. With community shaders though it does leave you at mercy of weather mods more.
The reason why we use the Dynamic display blur effect to so enhance the focus of the area for graphic design and it helps for lower tier pc builds so the GPU doesn’t hard crash.
Man that grim ENB got me feeling a type of way
finally a video that explains a lot of the good stuff instead of showing us the slow way and blablabla,
thankyou!-enjoying my first ENB-[Vanilla ENB] really appreciate you buddy! thanks 4 giving!
great tutorial, got everything to work how i wanted it on version 1.6.353
was finding how to install an ENB properly and this tutorial was great. thank you!
Dude! Simple and straightforward. Thanks for keeping it short and to the point!
hay man did you have an issue where it kept directing you to pc app store?
Thank you, fast , easy and great tips at the end that change everything
That PRT XII mod creator is a wizard! Thank you. :)
Yea he also made NAT 3 which is also fantastic
Please show the next steps: SSEEDIT, Bator Smash, Bash Smash, Merge Plugins/zMerge, FNIS/nemesis and maybe Outfit Studio
Every video of yours is way too addictive...The work you're putting is astonishing, i hope your channel will grow so much ! I have an ENB issue i was hoping you or any other kind soul could help me with. I can't for the life of me get the Berserky ENB to work, even though i think i have all the requirements, load order, compatibility, requirements and so on. The problem is that this ENB does't recognize the NAT weather, because in the in game weather ENB tab, it is written "weather file not set". Apparently it could be the ENB helper not functionning properly but i have the latest version installed and it seems to work perfectly when i switch to Rudy Enb for Obsidian Weathers. Any help from you or anyone would immensely be appreciated !
Make sure you just have the NAT weather plugin not the main NAT weather mod
@@SoftGamingOfficial Thank you for your quick answer ! Yes i have indeed the Nat esp weather plugin installed
im sorry i watched this on 2x speed and watching you send that wolf flying at the end made me crack up 9:33
finally a clear step by step guide ((': thank you so much
Thank you for this clear, concise information. It was very helpful. :)
Def the best tutorial video ive found so far
Hi! Many Thanks for all of you’re videos. I very like you’re clean presentations of the mods, that’s helps me a lot to find the right one for me. But one Question. In my case, I used Rudy and it’s very low saturated in the directional comparison with this video. Are you also using some Reshade presets or something? How do you get this very bright, saturation and clean look? Many thanks.
finally got my mods to work because of this video
made my life so much easier god bless my g
its so weird. no matter which enb i'm installing it never looks anything like in the videos.
Same, i just gave up. What's funny is that when you trying to "fix" it, you unintentionally make it worse. Spent the whole day to figure it out but no luck, damn it, my nerves already broken
@@jhoyciv Yeah same, i totally gave up
Hi there! What hair mod are you using for your character? Love the little half up-half down look
This is so helpful for new players. Thanks.
_Damn..._ And I've literally just reinstalled and put in some 200+ mods for Skyrim.
_So..._
Now that they are installed, can I still use ENB?
Or is it a case of restarting the whole Skyrim list again?
_Regardless._ If I do or don't do anything, this is a good, easy to follow, understand and very informative video. So for someone like me who's old _(63.)_ and not that great when it comes to the _little bits of modding (i.e. I'm as thick as a plank of wood!),_ it was great 👍
Also. It'll be interesting to know exactly what other MOD's you were running with ENB installed.
Because I wasn't able to use ReShade on Genshin I fiddled with Nvidia Freestyle till I had settings I liked
Sharpen +
Intensity 25%
Texture Details 25%
Color
Vibrance 10
Details
Sharpen 0%
Clarity 100%
HDR Toning -100%
Bloom 9%
Brightness/Contrast
Exposure 35%
Contrast 35%
Highlights 69%
Shadows 75%
Gamma 0%
Genshin in-game brightness settings between the C and the E on the slider
Nvidia Control Panel Digital Vibrance 70%
Screen brighttness should be at 100%
The same settings work with multiple different games (on Diablo I have different settings to make it more darker and atmostphereic)
Thank you, I didn't get the god rays from the Sun effect but I got everything else and you have helped me thank you.
Off the top of your head, is there anything you might be able to point me to? I chose the Rudy EMB and installed them all via mod organizer2 is this an ini file setting or do I need a secondary file?
@@rohandaniel311 so no it did not look as good as the video but I think it's called vortex and it is a mod manager I believe that will set up all the mods for you and download them because I know that can be confusing. I use Mo2 mod organizer 2 and it will show you if there are conflicts, vortex is something to look at though it works for fallout and Skyrim
Hello
Please make a video on How to install Berserkyr ENB. Partical patch shown in this video conflicts with NAT.ENB. Lux is having huge installation steps.
Pls give a detailed guide about it.
I can't find VIBRANCE line in ENB ,everything is same in your video but i not found VIBRANCE. whyyyyyyyyyyyyy
Each ENB preset will have slightly different options in the settings, it depends on the author. Vibrance is similar to saturation if you have that option
PSA: Get ENB Input Disabler, otherwise you'll be moving your camera and swinging your weapon as you're messing with your settings in the GUI.
Great video I needed this!
Thank you very much for the video. I finally understand the ENB, which brought me upside down.
very well explained
Great work, but switching them on/off during showcase in missing for me ;)
Which armor and blade mod you use?
my favorite is Pi-Cho with Azurite and LUX
Great video. Do you have one that goes more in depth on the enb in game settings?
Not currently, each ENB is different though. Some have a complex gui while others are more simple
My biggest issue with enb's is that indoors is far to dark. Most of the time you can't see anything, forcing you to either use a torch or fire spell. It is a real shame because the out door areas looks amazing.
IKR, I hate playing in the dark, but it also helps me see better than the daytime to see the visuals of Skyrim better. Is cabbage worth it or rudy ENB?
@@marielacastro1819 Never used cabbage before, so i can't say.
Thanks, this helped a lot.
why does your rudy enb look so much better than mine
yoooo with my new pc i can hopefully run a more modern skyrim, modding right now actually
You have taught me a lot, i subbed!
Under shader parameters, I have all of the default ini settings, but none of the additional settings does any one know how to fix/why this is happening?
thank you, you saved my life
Didn't work at all, I get the menu but nothing changes anything.
Hey Man, thanks for the video! I have a question, I am running a 6700xt with a 2k monitor. Do you think I will be able to run this with 60 fps with the other video you made about the total graphic conversion?
Hey, thanks for the good video! I had a question - how is your ENB GUI pausing the game? Mine doesn't disable player controls or update automatically when I make changes. Is this a setting you changed or is it a mod? Thank you!
I have a controller plugged in which separates the inputs. But there is a mod now that pauses the game while in the GUI made by doodlum
Great guide
im using PRT XII enb, but i got pop-up ENB Helper is not working etc.
Can you make a video how to fix it?
Great vid helpful
Nice water effects
How to install the weather mod i can't find the tutorial anywhere😕
most can just install through your mod manager
Hey man, I love your videos! You use PRT XII, right? So then for your weather are you only using NAT 3.0 as required by PRT XII? I'm trying to figure out how to the the same vibrancy and color like yours. I'm using ENB Cathedral Weathers with the Lite PRT XII that's compatible with all weather mods.
I've installed all of your recommendations and game seems to be running decent so far but my enb menu is different and doesn't have the vibrancy feauture
Hi I use berserkyr enb now but yes I still use the NAT weather plugin. Vibrancy can be called saturation, maybe it has that instead?
Thank you, your videos are really helpful. Can you tell me hod did you customize the PI-CHO ENB to get those beatiful sunrays effects at 4:22? With all those parameters I can't find the right one.
Thanks for the video. I really want to play with ENB and this awesome presets but I get always the messages that there is still something missing or something that doesn´t fit right in Vortex. It seems to be it is not easy to mod Skyrim actually if you have no clue at all how everything fits together.
Hey maan whats the attack animations mod name?😁
Berserkyr ENB is my fav one.
Did you have a blurry issue I can not play Skyrim because the blurry vision is that bad
@@ghr501able Yep I did. You had to turn off a setting in the enb settings to get rid off the blur. Also I used a mod called enb sharpen or sharpen something something can't remember to make the image crisp
Big thanks for the well explained video, really helpful for me, as I just started to mod my Skyrim just two weeks ago.
I have watched several of your other videos to, love them all. Have a nice weekend and greetings from Sweden
Thankyou! Have fun!
What smooth cam preset are you using? Looks great.
its my own called Soft Preset
@@SoftGamingOfficial did you upload it by any chance? I would love to use it for myself
when I'm on the ENB site to download the files, there are only option for Skyrim, Skyrim SE, and Skyrim VR, but I am playing the anniversary edition, do I just click the Standard edition download? Thanks in advance!
Yes you do!
Will the ENB work with Microsoft Visual?
hi，may i know the website enbdev is safe? Because Google detect the link is not safe😅
yeah google says like that but it's a dev site of it so it's safe don't worry (i am also very picky when it comes to these types of sites)
@@goodf0rnothing thank you you reply😆
How do I get rid of the blur I don’t see the option in the settings
DO you mean the depth of field? you can switch it off completely or play around with the DOF settings
Hi, nice video but shader parmeters are missing for me who use pi-cho enb (i don't understand because i download the same files as you) it just write "constant" in the shader windows.
What do you do if the wrapper version doesn't have both the d3dll and the compiler? Mines only has the d3dll in it.
Also have this
Did you find a fix?
Hey man, loving your content! What Weather mod do you recommend for someone using PRT XII?
There is only one out there, which PRT XII was made for: NAT 3.0. There are no other weather mods which will work with it.
FOR EVERYONE WHO GETS THE ERROR
"ENB HELPER MAY BE NOT INSTALLED CORRECT"
Make sure you got The Nat Plugin not the main file!
what do you mean, I genuinely dont understand
@@chulito5106 Same
Help i am getting that error
@@shamailnasir7960 so depending on which ebb you install it will say for what type of weather mod you have install if you don’t have any by default you’d have to download the vanilla version of the enb pack.
Do the pre sets come with all the grass and trees ? or is it just a resolution thing?
so, If I WANT TO use the standard preset, do i drag all of the files in + those folders? that part got me a little confused.
Amazing video..I hardly ever sub to anyone because their tutorials are either too fast or skip certain small (very important) steps. I can't use the enb you are because author has it hidden. Could you send it to me please?
Thank you very much.
Why does it feel like ENB's for oldrim looked better? I really can't settle on an ENB as they all look kinda lame now that I can use them
Is ENB Helper the menu for ENB? That has always been automatically installed for me with ENB...
what end are you using in this video? i tried to install rudy enb, but it have no impact on my game.
Mainly PRT and Rudy, did you install everything correctly?
did you download all the requirements?
Sorry if I'm wrong, but aren't you supposed to use the binaries that were most up to date when your enb was released? I'm just comming from LE so this may just an outdated issue now.
Good Guide. Thx
helo!! what enb do you use? Sorry im french
Hey ! All good, I'm currently using PRT XII
can i know what cloth mod you are using in this video, the one with brown pants?
What is your modlist or the mod who let skyrim look like yours ?
This video was very useful, thanks a lot. I am unsure tho on how to install the complex grass mod, since it's only download option is manual. If you or someone else could help me out here I would be very thankful
I think the fact letterboxes are enabled by default is dumb
Every time I open the menu and I try configuring the setting my character still moves and looks around. How do I stop this?
try plugging in a controller (thats what i do) or you can try this mod www.nexusmods.com/skyrimspecialedition/mods/62796 ive never used it so not sure if it works though
Hello, can you please suggest the sword mod in this video?
I followed your steps which is pretty easy for my low specs brain to follow and it worked... indoor...
the moment i step outside the enb helper is not working, my skyrim is version 1.6.1130 and the one nexus is either for version 1.5.97 or 1.6.629 and up, I kinda confused which one should I get, any advice?
So for some reason I dont have all the settings in the shader parameters tab. I cant change the vibrancy of day time or anything else
i am water, soft enough to offer life, tough enough to drown it away. #soft
Every time I try this I get this “ ENESeries compling shaders, please wait Set Shadercache-true” error. It never starts. I’m a newbie at this. Not sure if you can help me out but great video.👍
I'm having the same problem. Did you get it fixed yet?
does ENB has a high end pc requirement? also is it hard to uninstall if everything goes wrong xD ?
Enb can be taxing on performance but yes easy to install and Uninstall
in these clips it looks like soft doesnt know how to fix the shimmering from turning off TAA either (i have been stuck experimenting for days.)
when it comes to enb, i always capped the game to 31fps because it feel like a movie for some reason, i dont like it when the game at 60fps with enb, it feels off
How’d you get your Rudy looking like that? Mine don’t do dat
how do you actually use this? do you have to run the prgram after every mod you install?
Do I need to install enb first before all the other graphics overhaul mods that you mention in your other video??????!!!
You can install ENB at anytime but install the binaries first before getting an enb preset
@@SoftGamingOfficial ok and does the graphic overhaul mods in ur other video work with the anniversary edition of skyrim or does it not matter