ฝัง
- เผยแพร่เมื่อ 7 ก.พ. 2025
- If you find the video useful, please consider supporting me with only 1% of what you spared with this job at a coffee price: ko-fi.com/tick.... Thank you :-)
Always wear gloves, eye protection and pay attention to hot oil!
This is a 2010 6-gear CDI B-class.
Be careful, oil is toxic for environment so dispose it properly.
Please subscribe for more videos about A-B classes.
Thank you :-)
Finally found new videos about W169/W245 which are detailed. Great job!
Thank you :)
Good videos. Good quality and clear. Thank you.
Thank you
Great job. I'd love to do this to my W246 B class.
Thank you. I used a Liqui Moly gear additive. Gearbox improved so much. Good luck :-)
Great job and awareness on the great job
Thank you 🙂
Clear and informative video.
What's the white stuff around the nut, is it PTFE tape
Thanks. It's a thread sealant already applied on the plug when you buy it. Good luck
Gutes Video, vielen Dank 😊
You're welcome 🙂
Hi, thank you for this amazing video.
I wanted to ask if it was necessary to change the bolt and if it is where can we get it ? Thank you again 😊
Hi, it would be better but not mandatory. You find on ebay or mb dealers. Good luck
Nice video. Anyway, I've purchased 2006. a150. Beautiful piece, but when driving, and with throtle I have a sound, metal sound like no oil in gearbox.More speed, more sound. With throtle out, that sound is out and in a cabine is total silence. Do you know, is it possible due to old oil in gearbox? 😮
Sorry but I have no idea. Could be many things. Good luck
Did you figure out what caused the sound. My a160 manual gearbox also has a light whining sound. I consider to replace gearbox oil first.
Is it the same procedure on a 5 speed gearbox and if so is it the same amount of oil? 🤔
Honestly I don't remember but I think it's different
Hello, is it ok to to the oil change without replacing the bolts (using the old one again) ?
Because I can't find them online.
@@jeanmoins495 yes, the important part is the sealant on the threads. Check for leak after the change
Recently done on my A200 from 2004.. oh well it was lacking some oils inside was only 900ml or so 😅 needed that cause my gearbox was a bit noisy and dry certainly!
I also found a very low level the first time I did the job. In fact I think this thing ruined my 2nd and 3rd gear synchros. Good luck
@@ticktime6569how long it should last? Did you change before 100k km or after? Mine was just below 100k but still very low oil level yeah.. now it rubs smoothly hopefully less noisy too
@@koookao i replaced it at 120k km. I should have done it before. It depends on the oil quality, but you should be fine for 5-8 years at least
@@ticktime6569 I've also asked a garage to change my coolant that was not changed since 2004.. it says 15 years or 150k km or so before changing coolant. Not sure if the garage fully flushed it as I saw only 3.5L flushed out. Any tips to check coolant change? Should I bleed air myself again just in case? He put -37°C coolant but pink color instead of mercedes blue one.. it should be fine I guess
@@koookao I don't know if the pink is good. You should ask the exact brand and coolant version. Probably they didn't replace it all, to make a quicker job. But honestly it's more probable you will sell the car before it expires
Hi, great video thanks, where can I buy this gear oil ?
Hi, autodoc or amazon. I used Febi. Thank you
Hey great video!
Does anyone know where i can buy a new bolt? I have boon looking everywhere but cant seem to find it. Many thanks in advance!
Hi. Ebay or Mercedes dealer. Or re-use the old one and check for leaks
oil name ?
Febi 21829 if I remember well
great thank you!!! maybe somebody has part number of the bolt?
Search on ebay, now I don't remember sorry
Or mercedes epc online
Witam bardzo dobra praca, mam pytanie a gdzie dostanę takie śruby nowe.
Cześć Dziękuję. Śruby do miski olejowej znajdziesz w zestawie Meyle, konwerter którego musisz szukać na ebayu lub w najbliższym centrum Mercedesa. Gratulacje
@@ticktime6569 Dziękuję
Done it on my A150 W169. But god that oil smells bad. Be prepared for the smell
You're right 🙂
im gonna do this on my a150 also was it hard?Is it hard to find the bolts?