How to Change Oil and Filter on a G37

แชร์
ฝัง
  • เผยแพร่เมื่อ 5 ม.ค. 2025

ความคิดเห็น • 42

  • @bradleytribble419
    @bradleytribble419 ปีที่แล้ว +4

    The engine holds 5.2 quarts. That's 5 quarts and about 6.5 ounces. When you pour it all in it's gonna show a little over full on the dipstick because it hasn't gotten into the filter until you start it up.

  • @blkted2945
    @blkted2945 2 ปีที่แล้ว +6

    This waa so helpful but maybe I missed it, you have to change the crush washer. I also had the missing emblem, I thought it was just my car. Thanks, I just starting changing my own oil due to the price increases.

    • @CarModsGarage
      @CarModsGarage  2 ปีที่แล้ว

      Ya change the crush washer if you can. It gets much cheaper doing it ourselves. I'm glad I could help! Remember to be safe and put some jack stands before going under the car. 👍

    • @Foolio.R6
      @Foolio.R6 ปีที่แล้ว +1

      Lol my emblem is missing to lol

  • @Capten1001
    @Capten1001 3 ปีที่แล้ว +7

    Do you know what capacity jack stand will work to jack up both the front wheels like you did in this video? Will a 2 ton jack do the job? Thanks.

  • @wayte7615
    @wayte7615 5 ปีที่แล้ว +11

    do you need to replace the drain plug? i see some ppl do that and do you think thats necessary?

    • @CarModsGarage
      @CarModsGarage  5 ปีที่แล้ว +2

      No you don't need to unless it's leaking oil. You could replace the washer also if it's leaking. Only don't tight more than necessary

    • @wayte7615
      @wayte7615 5 ปีที่แล้ว +1

      @@CarModsGarage thanks!

  • @chiknhawk90701
    @chiknhawk90701 4 ปีที่แล้ว +8

    great simple vid my friend. Thank you

    • @CarModsGarage
      @CarModsGarage  4 ปีที่แล้ว

      Thanks my friend. I appreciate your comment.

  •  4 ปีที่แล้ว +4

    It boggles my mind when people know their car takes a certain amount of oil and they still under-fill it then check the dipstick, knowing it's gonna be low!!!

    • @frzspr1362
      @frzspr1362 4 ปีที่แล้ว +1

      Are you a woman?

  • @runsa
    @runsa 7 หลายเดือนก่อน +1

    what year is your g37?

    • @CarModsGarage
      @CarModsGarage  7 หลายเดือนก่อน

      It was 2010 or 2012 I can't remember.

    • @runsa
      @runsa 7 หลายเดือนก่อน +1

      @@CarModsGarage thanks for the response!

  • @Emilio_aruiz
    @Emilio_aruiz 4 ปีที่แล้ว +2

    I changed my oil by myself and now my transmission is slipping you have any idea why

    • @CarModsGarage
      @CarModsGarage  4 ปีที่แล้ว +4

      that's not related to oil change. if the transmission is slipping it is because the clutch disk is going bad assuming you have a manual transmission

    • @Emilio_aruiz
      @Emilio_aruiz 4 ปีที่แล้ว +1

      @@CarModsGarage nope got an automatic it was fine before I did it I added 5.5 when it said 5.2 but didn’t think it was even that

    • @Emilio_aruiz
      @Emilio_aruiz 4 ปีที่แล้ว +1

      @@CarModsGarage but was good before the oil change so that’s why I’m so confused

    • @CarModsGarage
      @CarModsGarage  4 ปีที่แล้ว +4

      @@Emilio_aruiz there is no connection (oil connection) between engine and transmission. Unless you removed the transmission oil but then you wouldn't be able to add all that oil to the engine.
      So you went under the car and took one bolt out. Did you mess with any wiring or other bolts?

    • @Emilio_aruiz
      @Emilio_aruiz 4 ปีที่แล้ว +2

      @@CarModsGarage just that bolt and filter didn’t do anything else that I think of that’s why this is so confusing

  • @richardwang1007
    @richardwang1007 5 ปีที่แล้ว +1

    My jack is 4 Inch to 10 inches
    Wouldn’t fit my G. What can I do?

    • @CarModsGarage
      @CarModsGarage  5 ปีที่แล้ว +1

      if it is because you car is too low I would get a large board and drive on it so it would lift the car a bit then you can fit your jack in there. I would not go under the car without a stand though.

    • @blkted2945
      @blkted2945 2 ปีที่แล้ว +1

      You gotta get a low profile jack, I got two, one from Harbor freight and a Big Red from Pep boys, I like the Harbor Freight Aluminum one better.

    • @CarModsGarage
      @CarModsGarage  2 ปีที่แล้ว +1

      Ya I have one from Harbor Freight also. They work great.

  • @dreysta9416
    @dreysta9416 3 ปีที่แล้ว +2

    Where can I buy that missing Infiniti badge

    • @CarModsGarage
      @CarModsGarage  3 ปีที่แล้ว

      found this one one eBay. Hard to find only the badge if not on a wreck yard
      ebay.us/bHWqMX

    • @cooldaddyslick6869
      @cooldaddyslick6869 ปีที่แล้ว +1

      Infiniti sells it separately

  • @JorgeMartinez-iy3rg
    @JorgeMartinez-iy3rg 3 หลายเดือนก่อน

    Este no sabe ni cuantos cuartos de aceite lleva su carro

  • @brandonblack2095
    @brandonblack2095 5 ปีที่แล้ว +4

    what year your g37

  • @Capten1001
    @Capten1001 3 ปีที่แล้ว

    Great video

  • @babysteps6488
    @babysteps6488 4 ปีที่แล้ว +2

    I have a infiniti g37 a BMW 335i and a Lexus RX 450h Lol we having very similar cars

    • @CarModsGarage
      @CarModsGarage  4 ปีที่แล้ว

      That's so awesome. I want to get a 335i to mess around but I need to finish my current projects so I can make a nice 335i.

  • @Lunarphantom99
    @Lunarphantom99 9 หลายเดือนก่อน

    166oz people

  • @DrunkRican21
    @DrunkRican21 ปีที่แล้ว

    Terrible

    • @Dabussy88
      @Dabussy88 10 หลายเดือนก่อน +1

      Like your mom