IKEA Alex Drawer And Lagkapten Tabletop Desk Assembly | Instructions | Connection Tips @TowneBlvdTiy
ฝัง
- เผยแพร่เมื่อ 20 ต.ค. 2022
- IKEA Alex Drawer And Tabletop Desk Assembly @TowneBlvdTiy. With instructions. Towne Blvd Tiy.
Come along with me as I assemble the gorgeous Alex Drawer and Lagkapten Tabletop. Instructions included. Tips on what pitfalls to watch out for during assembly. Tip on how to assemble the TableTop to the desk!
This can also be the ultimate gamer's table or used for a home office set up.
Dimensions
Alex Drawer
58(L) x 36 (W) x 70(H) cm
Lagkapten Tabletop
160(H) x 60(W) cm
link to the desk below
www.ikea.com/ca/en/p/lagkapte...
This is another series of videos I have on how to assemble Ikea furniture at home. After completing you can see why this is one of IKEA's most popular items.
IF THIS VIDEO WAS INTERESTING, HELPFUL, APPRECIATE YOUR HELP PLEASE TO GROW MY CHANNEL. SUBSCRIBE, GIVE ME A THUMBS UP, SHARE, LEAVE A COMMENT OR QUESTION.
#Sil_bandit #IKEA #Gamerstable #lagkapten,#subscription_appreciation_1100_goal #youtubetv,#TIY,#DIY,#IKEA l#homedecor #end_the_struggle,#helping
IKEA Alex Drawer y Lagkapten Tabletop Desk Assembly I constructions I Tips & I @TowneBlvdTiy - บันเทิง
![[TH] G2 vs PRX | EDG vs FUT - VALORANT Champions 2024 DAY 4](http://i.ytimg.com/vi/Bkr_qM7dIaM/mqdefault.jpg)
hello! im a 14 years old! i did this by myself the instructions weren’t helpful, but because of you i finished it in 2 hours without any help! ❤❤
Hi there,
Thanks for watching my video and the ultra kind feedback. Wow, you are very welcome. I'm glad my video was able to help you. At such a young age you are well on your way to accomplish many more projects.👍🏾
Thanks again for watching my video and the subport😊
Good job big man, you did great! 👏👏🎉🎉
I’m 28 & I started doing such things when I was older than you.
I am very proud of you Allin ❤❤
Keep up the good work bro 🤝
Im 15 and I finished my under 1 hour and this is my first building a desk and im proud of u bro even tho i went through trouble of trying to build it broke some of the things had to order some more but j finished and it looks good
thats nice man I’m 16 tryna do the same thing I built the first one 2nd one to go👍
I like how the instructions say put the rubber feet on the side *with* holes. Thanks for you video clearing this up.
Hi there,
Thanks for watching my video and the kind feedback. Yes, I had to clean up the picture provided in the instructions as was just a recycled version of when you build cabinet as a stand alone unit. I tried to emphasize this difference multiple times. Glad you noticed.
Thanks again for watching and the subport to help me grow my channel👍🏾
This is hands down the best video on Ikea Alex assembly. Thank you so much!
Hi there,
Thanks for watching my video and the
ultra-kind feedback. When I make a video and put it out there I never know what the impact will be. I'm glad you enjoyed feedback like yours inspires my to keep making these videos 😄
Thanks again for watching and the subport to help me grow my channel👍🏾
@@TowneBlvdTiy This video is superb, and I'm about to use it to build a desk for my home office - just one question though, if you opt for the longer work surface, are their guide holes in the centre for a leg to be placed?
@@OanKnight Hi there,
Thanks for watching my video and the feedback. Yes, there is a tabletop with the larger surface area that does offer the option of the leg support in the middle. Keep in mind that you may run into it while sitting in your chair.
Thanks again for watching and the subport to help me grow my channel 😄
You've just made my day 100% easier, although i'll be attaching the top of the drawers to the desktop and then fixing to the drawers instead of fighting in the dark to find the holes :D
Hi there,
Thanks for watching my video and the super kind feedback. That's also another creative idea! Thanks again for sharing and the subport to the growth of my little channel 👍🏾😊
Brilliantly done, thank you so much. I just fixed the table easily by looking at your video. The table top fixing instructions from IKEA are not clear and misleading, happy that I followed your video. You are a star.
Hi there,
Thanks for watching my video and the ultra kind feedback. You u are very welcome. I'm glad my video was able to help you.
Thanks again for watching my video and the subport to help me grow my channel 😊
I would not have finished this assembly (sane) without your video. Thank you!
Hi there,
Thanks for watching my video and the super kind feedback. I'm glad if it was able to help you.
Thanks again for watching my video and the subport to help me grow my channel👍🏾😀
Thank you so much for doing this video. It was fabulous. Don’t know how we would have done it without your instruction Thank you so much.
Hi there,
Thanks for watching my video and the super kind feedback. I'm glad it was able to help you.
Thanks again for watching my video and the subport to help me grow my channel👍🏾😀
Your video made this assembly very easy! I especially appreciate the tip on how to align the holes for the desktop. I got it aligned on my first try! Thank you so much!
Hi there,
Thanks for watching my video and the super kind feedback. That's great that you got the alignment on one try🫷🏾
Thanks again for watching my video and the subport to help me grow my channel 👍🏾
thank you so much. I'm a visual learner and this helped me so much. Very easy to do because the help of you :) didn't open the instruction manual once lol
Hi there,
Thanks for watching my video and the ultra-kind feedback. I'm glad you it helped you alot, feedback like yours inspires me to keep making these videos 😄
Thanks again for watching and the subport to help me grow my channel👍🏾
Thank you so much for explaining how to screw on the tabletop! I was struggling for hours and almost decided to give up when I found your video.
Hi there,
Thanks for watching my video and the kind feedback. I'm glad my video was able to help you, feedback like yours inspires my to keep making these videos 😄
Thanks again for watching and the subport to help me grow my channel👍🏾
Was really struggling to line the top of the desk with the drawers and struggling to find a video that would help me until I found this one!!! This was an amazing tip to align these!! Thank you so much
Hi there,
Thanks for watching my video and the ultra-kind feedback. I'm glad my video was able to help you. Feedback like yours inspires me to keep making these videos 😄
Thanks again for watching and the subport to help me grow my channel👍🏾
Thanks so much . We couldn’t of made this desk without your video. Thanks from Wales 🏴 👍
Hi there,
Thanks for watching my video and the kind feedback. I'm glad it was able to help you in your efforts. A fan in Wales, Kool!
Thanks again for watching my video and the subport to help me grow my channel.
Thank you! This was super helpful, especially re: attaching the top of the desk.
Hi there,
Thanks for watching my video and the kind feedback. I'm glad it was able to help you in your efforts. Yes the table top can be tricky to attach to the cabinet😊
Thanks again for watching my video and the subport to help me grow my channel.
Would've taken me ages to do this without your tips, cheers pal!
@@rooryyyy Hi there,
Thanks for watching my video and the ultra-kind feedback. I'm glad you enjoyed the video and if it was able to help you. Feedback like yours inspires me to keep making these videos 😄
Thanks again for watching and the subport to help me grow my channel👍🏾
I usually don’t leave comment on TH-cam, but, this is an exception. Thank you for your tutorial, you made it easy to couple.
Hi there,
Thanks for watching my video and the super kind feedback. I'm really glad if my video was able to help you😊
Thanks again for watching my video and the subport to help me grow my channel 👍🏾
THANK YOU! I had been struggling for about an hour trying to match those stupid holes, it just never clicked to find something that could go easily between both
Hi there,
Thanks for watching my video and the ultra-kind feedback. When I make a video and put it out there, I never know what the impact will be. I'm glad if my video was able to help you 😄
Thanks again for watching and the subport to help me grow my channel👍🏾
@@TowneBlvdTiy Let me tell you it took me longer to find something with just the right size that could fit there, than what it took me to align it with your amazing tip!
Love your video. 🎉you made assembly better than any instructions provided. THANK YOU
Hi there,
Thanks for watching my video and the super kind feedback. I'm glad if it was able to help you.
Thanks again for watching my video and the subport to help me grow my channel👍🏾😀
got this delivered today and currently watching along to put this together.
Hi there,
Thanks for watching my video and the ultra-kind feedback. I'm glad if my video is able to help you. Good luck & Hopefully everything go well. 😄
Thanks again for watching and the subport to help me grow my channel👍🏾
This was very helpful! I am looking to buy it and this gave me all the answers I needed. Just bought it. :)
Hi there,
Thanks for watching my video and the kind feedback. Good luck putting it together.
Thanks again for watching and the subport to help me grow my channel👍🏾
Thanks for the wonderful advice and tips. Much appreciated
Hi there,
Thanks for watching my video and the kind feedback. You are most welcome. I do what I can when I make these videos.
Thanks again for watching and the subport to help me grow my channel👍🏾
I loveee ! I put my drawers to the right side thank you for this
Hi there,
Thanks for watching my video and the kind feedback. I'm glad it was able to help you.
Thanks again for watching my video and the subport to help me grow my channel👍🏾😀
Thank you for adding this comment because I want to put my drawers on the right side and assumed I could make that happen but wasn’t fully sure. Thanks again!!
Listen you are a genius. I lmost pulled out my drill to make new holes cuz the stuff wasnt lining up. With your idea...boom table is now attached
@@stacybrown6294
Hi there,
Thanks for watching my video and the super kind feedback. I'm glad my video was able to help you wrap up this project. When I make a video and put it out there I never know what that impact will be, I'm glad this was a positive one🙂
Thanks again for watching my video and the subport to help me grow my channel 👍🏾
Great tutorial. Except when I first opened it and saw the auto screwdriver, I was scared a bit because I thought I would need one, but with a normal screwdriver and a hammer you can get this done easily. Thanks!!
Hi there,
Thanks for watching my video and the feedback. Yes, a manual screwdriver and hammer will do the job just fine. The power screwdriver is for those of us that "like power" on the job 🤣
Thanks again for watching my video and the subport to help me grow my channel 👍🏾
Lol like how u didnt even bother sticking the alex's feet on symmetrically, honestly was confused with how the instructions wanted us to put it on neatly with cutting that little square out.
Hi there,
Thanks for watching my video and the kind feedback. Yes, I had to clean up the picture provided in the instructions as was just a recycled version of when you build cabinet as a stand alone unit. I tried to emphasize this difference multiple times.
Thanks again for watching and the subport to help me grow my channel👍🏾
Thx brother for sharing this review n show how u assemble it..u my hero brother ❤
Hi there,
Thanks for watching my video and the ultra-kind feedback. I'm glad you enjoyed feedback like yours inspires my to keep making these videos 😄
Thanks again for watching and the subport to help me grow my channel👍🏾
Thanks for this, I just assembled mine following some tips from this video
Hi there,
Thanks for watching my video and the kind feedback. I'm glad that some of my video was able to help you. Feedback like yours inspires me to continue to make these kind of videos.
Thanks again for watching my video and the subport to help me grow my channel 👍🏾😊
Thank you so much you just made my life 10 times easier!
Hi there,
Thanks for watching my video and the ultra-kind feedback. I'm glad if my video was able to help you. Feedback like yours inspires me to keep making these videos 😄
Thanks again for watching and the subport to help me grow my channel👍🏾
This was very helpful. God bless you and your family. 🙏
Hi there,
Thanks for watching my video and the super kind feedback. I'm glad it was able to help you. Peace be with you and yours!
Thanks again for watching my video and the subport to help me grow my channel👍🏾😀
Great video thanks 👍 …loving your little helper ❣️🐶
Hi there,
Thanks for watching my video and the super kind feedback. I'm glad it was able to help you. My little helper 🐶 is always around which makes things interesting.
Thanks again for watching my video and the subport to help me grow my channel👍🏾😀
Your video was a tremendous help. Thank you very much.
Hi there,
Thanks for watching my video and the ultra-kind feedback. When I make a video and put it out there, I never know what the impact will be. I'm glad my video was able to
help😄
Thanks again for watching and the subport to help me grow my channel👍🏾
Thank you. There were no instructions on how to assemble the legs and table into the drawer. Great visual. Keep it up.
Hi there,
Thanks for watching my video and the ultra kind feedback. You are very welcome. I'm glad my video was able to help you.
Thanks again for watching my video and the subport to help me grow my channel 😊
Very nice , even in person😃
Hi there,
Thanks for watching my video and the kind feedback. I'm glad it was able to help you in your efforts.
Thanks again for watching my video and the subport to help me grow my channel.
Excellent! Thank you
Hi there,
Thanks for watching my video and the kind feedback. I'm glad if my video was able to help you. Feedback like yours inspires me to keep making these videos 😄
Thanks again for watching and the subport to help me grow my channel👍🏾
Thank you so much for this video. We are looking at this exact setup (in different colors) for our new home office. Great step by step instructions.
Hi there,
Thanks for watching my video and the super kind feedback.Good luck with your project. Great if my video helps.
Thanks again for watching my video and the subport to help me grow my channel 👍🏾😊
I followed the ikea manual and I was so confused on why the tabletop and the drawer didn’t “click” then I search for it online and I found your video! Had to dissamble them again 😭 But thank you for this video! It was super helpful, I’d rather watch your video than follow the manual
Hi there,
Thanks for watching my video and the super kind feedback. I'm glad it was able to help you. ,Yes, the e manual can use some help!
Thanks again for watching my video and the subport to help me grow my channel👍🏾😀
Great video thanks so much 😊
Hi there,
Thanks for watching my video and the super kind feedback. I'm glad if it was able to help you.
Thanks again for watching my video and the subport to help me grow my channel👍🏾😀
Great video, thank you
Hi there,
Thanks for watching my video and the ultra-kind feedback. I'm glad you enjoyed the video and if it was able to help you. Feedback like yours inspires me to keep making these videos 😄
Thanks again for watching and the subport to help me grow my channel👍🏾
awesome man thanks for this
Hi there,
Thanks for watching my video and the kind feedback. I'm glad it was able to help you in your efforts.
Thanks again for watching my video and the subport to help me grow my channel.
I struggled trying to figure out how to line up the Drawers with the Top. your tape recommendation was all i needed from this but I really appreciate it. Thank you so much
Hi there,
Thanks for watching my video and the kind feedback. I'm glad some elements of my video was able to help you out. Feedback like yours inspires my to keep making these videos 😄
Thanks again for watching and the subport to help me grow my channel👍🏾
You saved me mate. Easier 💯 than the bland manual
Hi there,
Thanks for watching my video and the
ultra-kind feedback. When I make a video and put it out there, I never know what the impact will be.Yes, the manual can use some work. Feedback like yours inspires me to keep making these videos 😄
Thanks again for watching and the subport to help me grow my channel👍🏾
amazing, ur video really helped , phew !
Hi there,
Thanks for watching my video and the feedback. I'm glad 😊 if my video was able to help you!
Thanks again for watching my channel and the subport to help me grow👍🏾
Amazing video!
Hi there,
Thanks for watching my video and the kind feedback. When you make a video and put it out there you never know what the impact will be. I'm glad you enjoyed it or it helped you out.
Thanks again for watching and the subport to help me grow my channel👍🏾
@@TowneBlvdTiy of course! the way you recorded it was amazing and I will use this as a reference to built my Ikea desk next week! Thank YOU!
I have a question. does the alex drawers have holes on top or do you have to make them? If i order each piece by itself instead of the whole set (just to mix match some colors)
Hi there,
Thanks for watching my video and the feedback questions. The Alex always comes with a board with the holes. If want to make it a stand alone unit e put the board with the holes on the bottom. If you want to attach it to a tabletop you put the board with the holes on-top of the unit. I'm not sure if you can order individual pieces unless you are replacing a part. Hopefully that helps.
Thanks again for watching my video and the subport to help me grow my channel 👍🏾😀
nice video,i see this in ikea,but in Mexico,and look nice.
greetings from Mexico
Muchas gracias por ver mi video y el saludo desde mexico. Me alegra saber que mi video tiene un atractivo internacional.
Translation:
thank you very much for watching my video and the shoutout from Mexico.
Glad to know my video has international appeal!
Thanks again for watching my video and the subport to help me grow my channel 👍🏾
Thank you from Arabia ❤
Hi there,
Wow, thanks for watching my video and the super kind feedback. I'm glad if it was able to help you in Arabia!
Thanks again for watching my video and the subport to help me grow my channel👍🏾😀
@@TowneBlvdTiy 🙏🙏💕💕💕💕💕💕
Thank you very much sir, this was just what I was looking for and answered some questions prior to purchasing. I was wondering how the tabletop fixed to the alex drawers. you the man..
Hi there,
Thanks for watching my video and the ultra-kind feedback. I'm glad you enjoyed the video and it was able to help you. Feedback like yours inspires me to keep making these videos 😄
Thanks again for watching and the subport to help me grow my channel👍🏾
Hi, thanks for the video. I’ve inserted the draws but now I can’t take them out! The rails don’t detach from the draw when its pulled out so I can’t take them out. Any suggestions? TIA
Hi there,
Thanks for watching my video and the feedback. I would suggest that you focus on getting only one out. You may need to use focused force to rattle it free. Since I can't really " see" what you are up against that's all I can suggest. Good luck with things.
Thanks again for watching my video and the subport to help me grow my channel 🙂👍🏾
Great video, thanks! But I have the old Alex drawers with no holes on top😉 Guess those attach with just sticky squares or something; these new ones seem sturdier with the screws to attach!
Hi there,
Thanks for watching my video and the ultra-kind feedback. That is amazing to hear. If you wanted to attach yours with screws I wonder if IKEA would consider giving you the part with the holes for you to attach using the screws.
Thanks again for watching, sharing, and the subport to help me grow my channel👍🏾
Thank you!! I am getting this desk soon but just wanted know if you can put the drawers on the other side as it would benefit me more??
Hi there,
Thanks for watching my video and the kind feedback. YES, it's possible to put the drawer on the right hand side. The tabletop has the holes on both sides to allow for the installation of your preference.
Thanks again for watching my video and the subport to help me grow my channel👍🏾😀
OO so no need to glue it :O thanks a bunch!!
Hi there,
Thanks for watching my video and the feedback. Yup, no need for glue unless you break something😆
Thanks again for watching my video and the subport to help me grow my channel 👍🏾
thank you so you screwed it in right? with screws
@@TowneBlvdTiy
@@BANIAAAAK Yes, I used the screws that was provided with the tabletop. I showed a trick in the video how to line up the holes of the tabletop and the drawer
Thanks
Hi nice vid, thanks 🙏 qq do you know if you can switch the cabinet to the other side, also is that the 120cm or 140cm size version? Thanks!
Hi there,
Thanks for watching my video and the kind feedback. Yes you can put the drawer on the other side as there are holes under the tabletop for that attachment as well. My version is the 140cm version.
Thanks again for watching my video and the subport to help me grow my channel👍🏾😀
Thank you.
Hi there,
Thanks for watching my video and the feedback. I'm glad if my video was able to help you.
Thanks again for watching and the subport to help me grow my channel👍🏾
I am thinking of getting the same desk but the 200 in dimension one (the largest one in their showroom) but I have a monitor that’s 34” curved will it fit on the desk? And is the desk width large? Cause I have the exact same one as yours 140x60 and I find it too small for my monitor and iPad and ps to be on the table. I have a lot of stuff on my table and I would like to have more space so if you guys can recommend a desk for me it’d be appreciated thx
Hi there,
Thanks for watching my video and the feedback. You can try another Tabletop which is bigger. www.ikea.com/ca/en/p/lagkapten-tabletop-white-10508220/ desk from IKEA. It's 80x160 cm in dimension. It's a little bigger. You should get two or 4 legs depending on whether you are going to use the cabinet drawer but may need to use self tapping screws and washers to attach the unit (if use 2 leg). If You use 4 legs, can use the same cabinet drawer and just slide it under the tabletop, it's up to you to determine if you want to attach it as described above. Let me know what you think.
Thanks again and subport to help me grow my channel.
@@TowneBlvdTiy thank you so much for your fast reply. I will give this one a go, 80 seems big enough. Thank you kind sir!
Hi there , can i install it the other way around ? like the alex drawer on the left and the feet on the right? thank you.
Hi there,
Thanks for watching my video and the feedback. Yes, you can install the drawer on the other side. There are holes on both ends of the tabletop to allow for either end installation. You just have to put the legs on the opposite side also.
Thanks again for watching my video and the subport to help me grow my channel possible.
Is it ok if I want to put the bigger drawers on the top layer instead of the small ones?
Hi there,
Thanks for watching my video and the feedback. By design, the big drawer has to go on the bottom. They will not fit properly if you try to put them in the other way. In order to do what you are asking you have readjust the sliders eith new holes on the sides to allow the fit, this might be a little tricky 😄
Thanks again for watching and the subport to help me grow my channel👍🏾
Love the video! Could you tell me the measurements of the table though? 🙏🙏
Hi there,
Thanks for watching my video and the feedback. www.ikea.com/ca/en/p/lagkapten-tabletop-white-10508220/ desk from IKEA. It's 60x160 cm in Also I listed most of the dimensions in the write up for this video. Let me know what you think.
Thanks again and subport to help me grow my channel.
Hey, where do you get the screws to connect the Alex drawer and the tabletop? Do they come with the drawer?
@@martoafro Hi there,
Thanks for watching my video and the feedback question. The screws come with the Alex Drawer.
Thanks again for watching and the subport to help me grow my channel👍🏾
Can you please tell the size of allen key required at 24:35 to detach drawer from the table top 🙏🏻🙏🏻
Hi there,
Thanks for watching my video and the feedback question. The allen bit used was the medium size but but you should always verify trying them against the screw for the best fit. Hopefully that helps.
Thanks again for watching my video and the subport to help me grow my channel 🫷🏾😃
There's no holes on the top of my Alex Draws? They are all on the bottom???????
Hi there,
Thanks for watching my video and the feedback question. Yes, you have the top and bottom in reversed, you'll need to undo both and flip them, whilst you are at it please pay attention to the side boards to ensure those are also on the correct sides and the rigt spacing for the drawers to fix properly. I point this out briefly in my video. Good luck with your project 😄
Thanks again for watching and the subport to help me grow my channel👍🏾
@@TowneBlvdTiy okay thanks.
It’s odd how my top drawer is not coming all the way out like yours. How come I fix that? I notice that one metal slider comes out was compared to the other one
Hi there,.
Thanks for watching my video and the feedback question.
Yes that is odd, to possibly fix check the side boards to make sure the space between the sliders is the same on both sides. If not one of the sides may need to be turned upside down. However, that would mean taking the unit apart,😟. This may also solve the slider problem. Hopefully that helps.
Thanks again for watching my video and the subport to help me grow my channel 👍🏾
How long did it take to complete the installation? What tools do I need? Will it be okay if I don’t have an electric screwdriver? Thank you.
Hi there,
Thanks for watching my video and the feedback. If you are familiar with the process this should take an hour. You just need a standard screwdriver 🪛 and a soft hammer. The drill is for power hungry folks.
Hopefully that helps.
Thanks again for watching my video and the subport to help me grow my channel👍🏾
thanks bro, the instructions said to put the feet on the holes and i was like that can't be right?? thanks so much!
Hi there,
Thanks for watching my video and the kind feedback. Yes, I had to clean up the picture provided in the instructions as was just a recycled version of when you build cabinet as a stand alone unit. I tried to emphasize this difference multiple times. Glad you noticed.
Thanks again for watching and the subport to help me grow my channel👍🏾
Best video and a great guide! Please do you have a link to this table? Also can you reach to do someones nails with this size? I was told to get an 18 inch depth only. I'm a nail enthusiast so I won't be doing too many people...lol
Hi there,
Thanks for watching my video and the super kind feedback. I'm not really sure about the comfort of doing other's nails, lol.
The link to the desk is below.
www.ikea.com/ca/en/p/lagkapten-alex-desk-white-s49431927/
Thanks again for watching my video and the subport to help me grow my channel 👍🏾😀
Hi, wonderful video really simple and dettagliated but i wanted to ask if there is non difference if my table is 120cmx60cm
@d_izzo1188 Hi there,
Thanks for watching my video and the ultra-kind feedback. I'm glad you enjoyed the video and if it was able to help you. In terms of the tabletop, it's just longer size. Attaching it to the desktop is still the same. So you good 😌
Thanks again for watching and the subport to help me grow my channel👍🏾
I followed the instructions and the table top holes are on the bottom. Is there another way to secure the desk without taking it apart?
Hi there,
Thanks for your feedback question.
Without taking the unit apart you will need to drill your own holes through the desktop and table top. Use screws that are long enough to connect both pieces. If you want to use the current screws you have to use a big enough drill bit but not to big to make the holes useless.
My advice would be to quickly take the unit apart especially the side boards and flip them around.
It's quicker without a lot of improvisation. Hopefully that helps.
Thanks again for watching my video and the subport to help me grow my channel 👍🏾
I have no idea what to do as I have built everything up until you add the drawers. But now I have realised that the railings don’t allow for all 5 drawers to fit and I don’t know why
Hi there,
Thanks for watching my video and the feedback. The reason why the drawers won't fit is because you built the unit upside down. You probably need to flip the side boards around on each side so the railings with the smaller spacing is on-top, bigger on bottom. I point this out at 10:38 of my video. Also make sure the board with the holes are on the top of the drawer unit. It's a quick fix to get you back in the game.
Hopefully that helps, thanks for watching and the subport to help me grow my channel 👍🏾😊
Ohhhh makes sense now. I’ve already drilled the board with the holes on my upside version. Not too sure how to take it out
@@Luvemma07 I'm not sure what you drilled.. and where you need to take something out..? Would you not just reverse what you did?
Is it possible to make the cabinet on right side instead on the left side?
Hi there,
Thanks for watching my video and the feedback. Yes it is possible to put the cabinet on the right hand side as the table top has the holes on both sides to allow the installation.
Thanks again for watching my video and the subport to help me grow my channel 😄👍🏾
Does anyone know how to detatch the drawers from the tabletop? I'm moving soon and it'll be impossible to move otherwise!!
Hi there thanks for watching my video and the feedback question.
In my video I show how to attach the TableTop to the drawer. Basically you have to remove all the drawers, on the top of the drawers you will find several screws, those will be loosened up and or removed.
Hopefully that helps,
Thanks again for watching my video and the subport to help me grow my channel😊👍🏾
Does the table legs have to be the same height as the drawers?
Hi there,
Thanks for watching my video and the feedback. Yes, I would recommend that the legs the same as the height of the drawer. If you are buying this unit it already comes the way, so no need to worry.
Thanks again for watching my video and the subport to help me grow my channel 👍🏾🙂
Hi there! I was wondering if I can attach the drawers on the *right* side of the desk instead of the left. Is that a possibility? 🤔 Thanks!
Hi there,
Thanks for watching my video and the feedback. Yes, it is quite possible to put the drawer on the right hand side of the table top. It has holes on the right hand side to allow for this preferred installation.
Thanks again for watching my video and the subport to help grow my channel.🙂👍🏾
@@TowneBlvdTiy thanks a lot!
What screw’s you use to connect top to filing cabinet
Hi there,
Thanks for watching my video and the feedback.
The final bigger screws that I used to connect the drawer to the tabletop cames with the tabletop. The ones I used to help line up the holes of the drawer and the tabletop were smaller random screws that I had laying around, and were not used overall. Hopefully that helps.
Thanks again for watching my video and the subport to help me grow my channel 😊
Hi, wondering if this can be done without an electric drill?
Hi there,
Thanks for watching my video and the feedback. Yes you can definitely do it without to the cordless drill. A manual
screwdriver will do just fine 😊
Thanks again for watching and the subport to help me grow my channel 👍🏾
What kind of bit did you use for the drill???
Hi There,
Thanks for watching my video and the feedback. What I used for the screws was a medium Philips bit, for the clamps on-top of the screws I used a medium flat-head bit.
Hopefully that helps.
Thanks again for watching my video and the subport to help me grow my channel 👍🏾😀
Nice job. Can you tell me what the height is from the top of the table top to the ground?
Hi there,
Thanks for watching my video and the feedback question. The height from the tabletop to the ground is about 72 cm or 28 inches. Hopefully that helps 🙂
Thanks again for watching my video and the subport to help me grow my channel 👍🏾😊
Can you put the draws/ legs on the opposite side of desk?
Hi there,
Thanks for watching my video and the kind feedback. Yes, you can put the drawer on the other side as there are holes under the tabletop for that attachment as well.
Thanks again for watching my video and the subport to help me grow my channel👍🏾😀
great video! i was able to assemble everything correctly! 🙌🏾 only thing is mine only fits 4 draws instead of all 5.. must be an error on IKEA’s part 🤔
Hi there,
Thanks for watching my video and the super kind feedback. I'm glad if it was able to help you. Yes, that's odd that it only has 4 drawers. If they fit properly and look proper then it might be by design. Lol.
Thanks again for watching my video and the subport to help me grow my channel👍🏾😀
I thought the same until I realized I had it upside down.
@@theresakemper8452 you are absolutely right! i did have it upside down, it only took me an extra hour after building it to realize that lol
@@theresakemper8452 lol, at least you figured it out.
Is it possible that the drawer can be on the right side? TIA
Hi there,
Thanks for watching my video and the kind feedback. YES it's possible to put the drawer on the right hand side. The tabletop has the holes on both sides to allow for the installation of your preference.
Thanks again for watching my video and the subport to help me grow my channel👍🏾😀
HELP! The screws that attach the drawer cabinet to the desktop aren’t working. They leave about 1/2 inch hanging out that will not go all the way through. Yours went in like a piece of cake. It seems the pre drilled holes in the desktop we’re not deep enough. Should I take the screws out and pre drill the depth of the holes in the desktop a little deeper? I’ve looked at other videos and nobody addresses this issue. Is mine just a feral problem?
Hi there,
Thanks for watching my video and the feedback. Stop!!
Before you do anything please check ✔️ to make sure you are using the right screws. The correct screws should work and not leave such a gap. Please review all your screws. Try this before you do something that may ruin your purchase. Take a screw out and measure it from the outside of the unit (drawer and desktop together) to determine even if you drill the holes further if that will solve the problem and to see the actual length of the screw. Good luck😀
Thanks for watching my video and the subport to help me grow my channel 👍🏾
Thanks for your response. IT means a lot when I get a response. That doesn’t always happen. Anyway, I took the existing screws out (they are the correct screws by the way) and checked the holes in the table top. There didn’t seem to be any more reason for the screws not to go all the way through. So, I went through heck trying to realign the holes again butbut I finally got that done. For whatever reason they went through properly this time. Go figure! The job is complete And just FYI I am a 67-year-old lady, and did it all by myself. Thank you so much for your video.
@@dhw5895 Congratulations 👏🏾
You are an excellent example of persistence and perseverance for your age!
Great job, 67 WOW!!
Oops - typo! I’m 76 not 67.
@@dhw5895 Wow!!!
So do you need a power drill for this?
Hi there,
Thanks for watching my video and the feedback. You can definitely do it without the cordless drill. The drill is just a way speeding things up. A manual wrench/screwdriver will do just fine 😊
Thanks again for watching and the subport to help me grow my channel 👍🏾
Am I just not strong enough to get the screws in?? 🙄😅
Hi there,
Thanks for watching my video and the feedback. I'm not sure what Part of the task you are at but the screw does not require a lot of strength
Perhaps something is not in the right place. Love to know where you are in the process
Good luck putting it together.
Thanks again for watching and the subport to help me grow my channel👍🏾
Why my Alex Drawer does not have 4 holes on the top?
Hi there,
Thanks for watching my video and the feedback. The reason why it doesn't have the 4 holes on the top because its on the bottom, check. If you followed the instructions that's what happens. The instructions in for when you do not have a tabletop that was just recycled. There is an error in the instructions and I pointed that out in my video. Take the sides apart and switch the top and bottom boards. Good luck.
Thanks again for watching and the subport to help me grow my channel👍🏾
Hi, it is possible that the drawers are located on the right side?
Hi there,
Thanks for watching my video and the
ultra-kind feedback. Yes, it's possible to put the drawers on the other side. The tabletop has holes also.
Thanks again for watching and the subport to help me grow my channel👍🏾
@@TowneBlvdTiy Thank you, nice video and great channel
Can the drawers go on the ride side ?
Hi there,
Thanks for watching my video and the kind feedback. YES, it's possible to put the drawer on the right hand side. The tabletop has the holes on both sides to allow for the installation of your preference.
Thanks again for watching my video and the subport to help me grow my channel👍🏾😀
can i make it two alex drawer for that tabletop?
Hi there,
thanks for watching my video and the feedback question. Yes you can add 2 Alex Drawers on both sides. The tabletop has holes on both sides to allow this.
Thanks again for watching my video and subport to help me grow my channel 👍🏾
So what size table top is that?
Hi there,
Thanks for watching my video and the feedback. The dimensions are as follows, LAGKAPTEN / ALEXDesk Tabletop, 55 1/8 x 23 5/8 " (or 140x60 cm). Hopefully, that helps.
Thanks again for watching my video and the subport to help me grow my channel👍🏾😀
❤❤❤
Hi there,
Thanks for watching my video and the ultra-kind feedback. I'm glad you enjoyed the video and if it was able to help you. Feedback like yours inspires me to keep making these videos 😄
Thanks again for watching and the subport to help me grow my channel👍🏾
I believe it makes things easier with a drill but do you think it is possible without a drill? If not ill just learn how to use my dads drill😅
Hi there,
Thanks for watching my video and the feedback. No, you do not need a drill to do this task. It's only a preference to speed things up for those who like power (tools), lol. A manual screwdriver will do just fine.
Thanks again for watching my video and the subport to help me grow my channel 👍🏾
Can you do it with every table top from IKEA?
Hi there,
Thanks for watching my video and the question. I'm not an expert but I'm sure you can. To be sure just ask an IKEA Rep while you are there.
Thanks again for watching my video and the subport to help me grow my channel ,😄👍🏾
Is a drill necessary?
Hi there,
Thanks for watching my video and the feedback. Yes you can definitely do it without to the cordless drill. A manual
screwdriver will do just fine 😊
Thanks again for watching and the subport to help me grow my channel 👍🏾
is it wobbly?
Hi there,
Thanks for watching my video and the feedback. No it's not absolutely wobbly ( provided that tighten up to screws properly).
Thanks again for watching my video and the subport to help me grow my channel👍🏾😀
Do I have to use the drill? “ I don’t have one rn”
@lenaabdullah154
Hi there,
Thank you so much for watching my video and the feedback. No, you do not have to use a power drill. It's used by those people that are obsessed with power. No worries 😊
Thanks again for watching my videos and the subport to help me out my channel 👍🏾
hey Alex \ Linnmon is better then LAGKAPTEN / ALEX??
Hi there,
Thanks for watching my video and the question. Based on what I see online, they are about the same design/appearance wise, however the linnmon desk seems smaller in length in the white offering
(40 cm), there is also a $20 spread on the Linnmon tabletop as you add color. Hopefully that helps.
Thanks again for watching my video and the subport to help me grow my channel 😄👍🏾
Instructions was great until the confusion which of the two panels would go to either top or bottom.
Beginning said to add rubber stoppers on the panel with holes. Turns out the panel with holes is needed to attach it with the table top...
Fyi, the IKEA manual. Not this video
@@itian3579 Hi there,
Thanks for watching my video and the kind feedback. Yes, I had to clean up the picture provided in the instructions as was just a recycled version of when you build cabinet as a stand alone unit. I tried to emphasize this difference multiple times. Glad you noticed.
Thanks again for watching and the subport to help me grow my channel👍🏾
Thx for video brother, i was little bit confused when they showed in the plan that the lower desk should have holes in it.
Hi there,
Thanks for watching my video and the kind feedback. Yes, I had to clean up the picture provided in the instructions as was just a recycled version of when you build cabinet as a stand alone unit. I tried to emphasize this difference multiple times.
Thanks again for watching and the subport to help me grow my channel👍🏾
Thanks bro, instructions aren’t clear around the feet part
Hi there,
Thanks for watching my video and the kind feedback. Yes, that's a pitfall with the IKEA instructions which they missed or not aware when they recycle stuff.
Thanks again for watching and the subport to help me grow my channel👍🏾😀
what name for table ? from micke ? or what ?
or...all desk from ikea we can hack like this ????
Hi there,
Thanks for watching my video and the feedback. The tabletop is named "Lagkapten Tabletop" from IKEA. Yes, to attach the desk and Tabletop, most are is like this. Hopefully that helps 🙂
Thanks again for watching and the subport to help me grow my channel👍🏾
I don’t understand how to attach the tabletop. I am struggling big time and even the tutorials aren’t helping
Hi there,
do you have the holes in the top of the cabinet and holes that is under the brown side of the table top? If so just like in my video you have to try and line them up. Just like in my video put a screw or a thin long end object through a hole in the cabinet first then move the table top around until the object lines up with the hole in the Tabletop. Secure the object with tape then do the same for any other hole. After you should be able to use the screw fro IKEA to attach both.
Hopefully that helps.
Or can you describe what you have...
You may need to switch your bottom and top pieces to the drawer unit. This video is the only one I've found that shows an accurate assembly. Other videos switched the top and bottom so there is nothing to screw the top to (which is fine for a freestanding drawer unit, but if you want a desktop, you do not want to make that mistake.)
Why was hammering the plastic screws the hardest part of the build…
Hi there,
Thanks for watching my video and the feedback. I would say it was the hardest part but you need to be careful because the material is soft and hammering too hard may cause damage. Hopefully that helps 🙂
Thanks again for watching my video and the subport to help me grow my channel👍🏾😀
@@TowneBlvdTiy bro, your video was amazing. It definitely helped me with the build! As I’m speaking now, I am building the Drawer for my Table Top. 10/10 Video! Keep it up!
dam bro i gotta do allat
Hi there, thanks for watching my video and the feedback. Yeah, if you wanna be the baddest gamer on the block, you gotta get it together and do all that.
Thanks again for watching my video and the subport to help me grow my channel 👍🏾 😀
@@TowneBlvdTiy ima try building it w my sister when it comes on the weekend lol and np
@@emefox Good luck 👍🏾🙂
As an 82 Some instructions were in the wrong sequence but you was lucky and didn’t have it as a I had to swap the top and bottom which in turn I had to take the stick studs off the TOP part making it useless to stick back on but I’ll get around and use glue. The other difficulty was attaching the table and I am still working hard how to work around it. There was no instruction on an easy way but you have put things back to a better way when lining up. It’s a nightmare.
Hi there,
Thanks for watching my video and the feedback. I'm sorry you're not having fun putting this unit together. All the challenges that you are having are some of the pitfalls I pointed out in my video. The instructions can use some help as it just recycled steps from when you put the unit together as a stand-alone unit. Good luck with completing the rest of the project.
Thanks again for watching and the subport to help me grow my channel👍🏾
@@TowneBlvdTiy Now I can’t fit the drawers. Could it be configured incorrectly since I followed incorrect instructions? Just for the sake of problem solving I will try and use the drawers from the 9 drawer unit of which I had no problems assembling.
Forgot to mention that the track sliders are very stiff.
@@MANOFKENT149
Hi there,
it's most likely they are upside down.
Hye, yi yih, seems like the best thing to do is take it apart and start over watching a few important steps from this video.