ฝัง
- เผยแพร่เมื่อ 1 ต.ค. 2020
- I wanted to give this a try, unfortunately I didn't have much time to get a ton of video, I thought this would be a cool perspective. This is part of a road widening project, the road was technically closed down but vehicles were still sneaking in and using the road.
- วิทยาศาสตร์และเทคโนโลยี
Good job milling machine
They call that machine a channel digger or road scraper here in Australia. That kind of machine can fill a semi up in 3-5 minutes depending on capacity, can fill a dump truck up in 2-3 minutes. These machines do work, they don't mess around when it comes to gouging out a trench, be it for kerbing and channeling or for road widening or whatever project it is needed for, they move dirt and lots of it! :D
Thats a asphalt milling machine AKA pavement profiler AKA rotomill AKA cold planer. If its digging channels over there they arent changing enough teeth and that creates a dead company.
@@internazisuite I've watched it dig channeling for new concrete kerbing and channeling and I know for a fact that it creates a flat and properly profiled channel - or trench - for the kerbing and channeling machine to move along once the bottom of the trench has been compacted and had debris removed. The council I saw it working for originally used to use a backhoe with a flat wide scraper bucket on the back, and they had to laboriously measure and level each section which took a couple of days to a week, depending on amount of kerbing and channeling needing to be installed. This machine cut the digging time to a couple of hours, vastly more efficient use of digging equipment which was specifically designed for digging channels or trenches.
I can fill a truck in 35 seconds doing base repair.
@@carltonp420 with what? a mill like this? hahahaha
Ive been trucking for these machines they fill my 20ton capasity very fast. It is a good job for truckers, no offroad or anything bad for the truck. I didnt first believe how much such short scrape of road does weigh and fill the bed fast. Its first hard to get the sense in the truck how far it blow the asphalt and fill the bed evenly becouse you cant always see the thing when its behind and my broken cameras are no help either. Ofc the operator will signal you if you have trouble but better without constant beeping. Inexperienced driver may get very uneven front heavy fill so need to be carefull when dumping it. Its also little stricky and hot and may get stuck when dumping so need to be on level ground it wont drop from my bed until its all the way up literally vertical.
We also had more efficient sweeper machines to clean the mess but it wasnt anywhere messy as here.
Good video. All the action is on the ground however. The milling drum w 500+ teeth, laser actuated hydraulics at each corner, computer controller, 1000 psi water spray system, etc.
Keep on grinding!
Same exact equipment outside my house. Took them twenty years. Since I moved here wow. Only most of them are red trucks.
Awesome videos love the photography!!!!!!!🔴🫢🤫 1:52
asphalt cold milling
Pretty cool perspective with the drone
What does it cost per square yard to mill a road ?
That will vary depending on what you are doing with the grindings. If you haul them away (depending on how far) or if you are throwing them on the shoulder, or stockpiling them locally, too many variables to give a price. You will have to be more specific.
@@JoeRockYT thanks for the response. Just to cold Mill down 4” and dump into a truck, provided by the prime.
@@jjohnson479 How many SY's total?
@@JoeRockYT 10250000 that’s 10 million
The ripping and the tearing! 😁
Daha neler göreceğiz 👍👍👍
Grinding a my life away lol.
Muy vien 👍👌✌️
Necesitamos 200 máquinas en Colombia mantenimiento viales ☺️👏👍🤝💪
콜롬기아에 200대의 도로 정비 기계가
필요합니다😀😃😄😁😆😅🤣😂😂🙂🖕👉
Nice
Two horns mean stop, one means start moving. Cool
other way around
Where can I go to get certified to operate the machine ????? Any help?
You don't need to. Just hire on to a job that runs a mill and nag them until they teach you.
@@carltonp420 bro any job vacancy for milling machine operator
@@carltonp420 I know the cuterPiller,wirgten and I have 3 year singpore working experience
@@carltonp420 paver also I can operate so tell me any job vacancy
Lucky you get a ground man 🤣
Just got a job with the milling company sounds like easy money
Asphalt milling is never easy if done right.
@@tracemanning7088 hi bro any have operater job vacancy?
lol. lmao even. have fun working 16+ hour days and living in hotels for months on end without so much as a weekend home.
@@IAmKillEveryoneyeah today first time telling trucks to creep forward and stop ... The operator worked from 6 to 5pm and than went onto night shift work after it when I went home... Seems like a slavery game
예수를 믿으면 그대의 모든 죄와 저주에서 해방됩니다. 그대는 하나님의 자녀가 되며 천국 배경을 누리게 됩니다. 성령이 그대와 항상 함께 하실 것입니다. 예수를 믿고 영접하세요. 예수는 생명의 빛이며 창조주 하나님입니다.
I want the machine here in Africa botswana
How much is the machine,there is tender we are working on in botswana Africa that will need that machine
We are looking for a partner whom we can work together to build roads in botswana in southern africa
Pliz forward me ur contancts so that we can discuss more