Awesome thanks for the help, I received the brackets with my kit and didnt bother cutting or reinstalling the plastic inserts. Also didnt have to use the switch the kit came with as I have upliffter switches in the tremor.
I think RC sent you the wrong brackets for that light kit and that’s why they didn’t fit. Instead of those lights, I got their 20” light bar kit for that empty space in the grill where you had the aftermarket mesh, and it used those same brackets you had but obviously they FIT in my case lol.
Hey Micah, thanks for the video. I’m about to order these now that I feel I can install them with your guide but just wondering how the lights have held up- they’re super affordable compared to others but I’ve seen the cheaper LEDs get moisture in the housing. Have you noticed any of this or other issues since installation or are they holding up?
No sir, they are still working just fine months later. I love how they light up the ditch on both sides to watch for deer. Make sure you go watch my new video on how to connect them to your high beams with a simple relay. Best $12.99 ever!
After bolt and clips are removed, is it only tension clips? Did you have any issues with removing the trim. I have a 2019 ranger xlt and can’t seem to pop it off
@@MicahMartinDIY So its just a pressure fit. That's what I figured but wanted to double check. I will be installing these once winter is over but looking for more of a bolt down option. Maybe a custom bracket...
Yes. Go onto my Ranger playlist and check out the video showing how to delete the switch and add a relay under the hood to make them work automatically with your bright lights. It's a much better option.
I have a 23’ Range Tremor with the Aux switches. Would I be able to wire this to the aux switch instead of using the stock on/off switch provided in the kit? Also would it affect the adaptive cruise control sensors at all? Thanks!
![[FULL EP.16] เซียนพาลุย "เผือก-ฟรอยด์" กรี๊ดลั่น จนปูหนี | เฮ็ดอย่างเซียนหรั่ง | One Playground](http://i.ytimg.com/vi/FsqUvwS3b-Y/mqdefault.jpg)
Oh yeah I’ll be getting a set for my 2019 ranger I’ve been wondering what to do with that area now I know awesome video
Thanks Paul! Toughest part is doing the cutout, but I know you've got it!
Nice vid. I may do this and will be using this vid for sure.
Thanks Jay! Do it, it looks great!
Thanks for the help with taking off the bumper, installing these lights this coming weekend. Great vid
Oh good! Glad I could help!
Nice install video
Thanks so much!
Awesome thanks for the help, I received the brackets with my kit and didnt bother cutting or reinstalling the plastic inserts. Also didnt have to use the switch the kit came with as I have upliffter switches in the tremor.
Glad I could help!!
Awesome video!
Thanks Torch!
I think RC sent you the wrong brackets for that light kit and that’s why they didn’t fit. Instead of those lights, I got their 20” light bar kit for that empty space in the grill where you had the aftermarket mesh, and it used those same brackets you had but obviously they FIT in my case lol.
Okay that makes sense! Thanks! I'm glad I was able to make mine work anyway.
Hey Micah, thanks for the video. I’m about to order these now that I feel I can install them with your guide but just wondering how the lights have held up- they’re super affordable compared to others but I’ve seen the cheaper LEDs get moisture in the housing. Have you noticed any of this or other issues since installation or are they holding up?
No sir, they are still working just fine months later. I love how they light up the ditch on both sides to watch for deer. Make sure you go watch my new video on how to connect them to your high beams with a simple relay. Best $12.99 ever!
After bolt and clips are removed, is it only tension clips? Did you have any issues with removing the trim. I have a 2019 ranger xlt and can’t seem to pop it off
Yes, those tension clips can be a major pain. I recommend getting the tool that I showed in the video.
Not sure if I am missing something here but how did you bolt the lights in? I don't see the brackets anywhere.
Go to 6:58 and I explain that the brackets will not work for this application, but you can install the lights without the brackets.
@@MicahMartinDIY So its just a pressure fit. That's what I figured but wanted to double check. I will be installing these once winter is over but looking for more of a bolt down option. Maybe a custom bracket...
Does your switch indicator stay on all the time even if the truck is off?
Yes. Go onto my Ranger playlist and check out the video showing how to delete the switch and add a relay under the hood to make them work automatically with your bright lights. It's a much better option.
I have a 23’ Range Tremor with the Aux switches. Would I be able to wire this to the aux switch instead of using the stock on/off switch provided in the kit? Also would it affect the adaptive cruise control sensors at all? Thanks!
Yes, you certainly can wire it to the aux. But I love that mine work with the auto brights. No, it does not affect teh cruise control senssors at all.
Is it legal to have those on while on the road in California do you know by any chance?
I'm not sure honestly. I can't keep up with all of California's laws these days.
come mail not see don't have paper read ford ranger led bumper kit series 6 dual ranger 2019 - 2020
I find paper on the internet copy no problem !
Oh good, I'm glad you found the instructions!