I got the gtr bulbs installed them for my low beam headlights definitely worth the purchase I think the truck should of came with these from factory a really helpful tip for anyone who is replacing these bulbs 💡 the passenger side bulb for the low beam is going to be a tight fight so wear gloves also due to the design it won’t rotate the bulb all the way so you will need to unplug the bulb from the harness then remove the bulb then when putting the bulb back on you will need to install bulb first then plug the harness hope this is helpful to someone
First time viewer, I really like this channel. Found exactly what i was looking for. Would it be possible to post a list of your ranger replacement bulbs, both headlights and fog lights? Keep up the great work
I was excited to find this video. It is really helpful information. I am bummed that this is the only video you made with the Ranger. I scrolled through your channel's entire video list and didn't find any new Ranger content.
Damn those CSPs are the only way to go for modern Ford trucks. I installed them in my '15 F-150 for both low and high beam and they're amazing, good to know they also fit the Ranger and look just as amazing.
The install for the high beams on the Ranger is really hard. My hand is scratched all over and I had to keep tweaking a bulb to get it aligned. Also, the fit is not as tight as the originals. I fear in a few hundred miles of bouncing around they will come loose.
Looks great. I’m definitely taking your recommendations, and want to also update my fog lights, just want to make sure I get right... Same bulb in fog as low beam yeah?
Really enjoying the increased visibility from these on my 2020 Ranger. Do the fog light LEDs need to face 9 and 3 as well? I cannot find much guidance on that.
Looks like they did something right. They kept changing a headlight bulb easy. I do love ford's for so many reasons. My 07 Ranger is easy peasy when I have to change lights on it. Some cars it's a project.
Changing the headlight bulbs in my 2016 F-350 is a royal P.I.T.A. I'm hoping that it won't be that difficult on my 2022 F-350 with the quad led headlights. At least I don't have to completely disassemble the front of my wifes 2020 Ranger to replace the oem bulbs.
I may or may not want headlights that will give the person in front of me an x-ray when they drive slow in the fast lane. What should I get if that was what I wanted? Theoretical question of course 👀 2019 Ford Ranger lariat
Would you happen to know the lux measurements for the factory LED lights equipped on the Lariat? I am curious if swapping out the entire headlight assemblies would be worth the nearly $2000 price tag vs swapping some good LED replacement bulbs such as the GTRs you show here.
I am sorry to say that we do not have the Lux measurements for those headlights, but I can tell you that the OEM LED headlights will perform better than just a simple bulb replacement! They are of course much more expensive, so for that little bit of an increase this may not be worth it for you.
But problem is the housing is reflector I installed mine and eventually go back to a halogen. The beam pattern is very ugly with darkspots in between Short distance testing is alright and unable to notice. but when you go out in the dark and will see the ugliness
I know mine where plug n play but it had to be adjusted. The led needed to be pointed left and right so the beam pattern can look good. I had to do it on both side of the headlight. i have not tried the high beams yet but one day i will.
Do these need an interface module of any sort on a 2019-2020 Ford Ranger so they do not throw a light on the dash or flicker or send a false current signal to the bcm?
I have linked those kits on the website for you below, you will not need any extra modules for them to work peroperly! Let us know if you have any other questions, we are here to help! Have a great day!
Bit of a dumb question. My car is an old car (1995 Mercedes E320) whose beam pattern is set by the headlight lens, not the reflector. Is there a LED upgrade which would be applicable for my car? I've seen other cars where they've clearly "upgraded" to LED and their beam pattern went everywhere but down the road. I'd like to prevent that if I can. Thanks.
There shouldn't be any extra wiring. Reach out to our customer service team with a picture of what you received, and well be able to figure out what you received! Sales@HeadlightRevolution.com
We have other bulbs tested in that video for that vehicle, but if you are looking for other bulbs altogether, then you would want to check out this video linked here: th-cam.com/video/LT-s4Eg7cyw/w-d-xo.html
@@HeadlightRevolution I'm going to return them. What would you suggest be my best option that's adjustable and puts out decent light without glare to oncoming traffic?
Hi I’ve installed some led bulbs in my 2017 ford ranger but the low beam is playing up, it will shine for 5 seconds then switches off. Any advice? I’ve also put some extra filters but it doesn’t help.
The little box is the LED driver. Every LED bulb needs a driver. Some are built into the bulb, some are external. Those drivers can just be tucked away.
Hey guys. What would I need for a 2020 xlt sport ranger. I have fog lights, drl’s, high beams, low beams? I’m just getting confused on what to use for the drl’s. Thanks
Thanks for commenting, I am happy to help with this! For that vehicle, I have linked all the options that we carry below, if you have any other questions just shoot us an email! Sales@HeadlightRevolution.com Link: www.headlightrevolution.com/buyer-guide-by-vehicle/2020+Ford+Ranger_with_Halogen_Headlights
I tried ordering these for my ford ranger it wouldn't let me. There's a section on your page to click on for DOT purposes I clicked on "headlights vehicles with license plates" then immediately the buy button goes grey and won't let me click on it.. what am I doing wrong? I'm just trying to buy some low beam headlight. For my 2020 ranger.
Well they’re not street legal according to the website. Now if you were to hypothetically order these lights for a Ford Ranger that was not intended for on road use and happened to mix up the two trucks.... just select the one for no license plate
The LEDs and HIDs are not legal for street use, if you would like to get those on order you will have to select that they are for vehicles without registration! Let us know if you have any other questions!
@@HeadlightRevolution Not being a jackass, but I have a 2020 Ford Ranger XLT Sport and I want these for my low beam, so I need to "lie" on the website in order for me to buy this? My truck IS registered with the DOT and has a license.
It really hasn’t been an issue on other vehicles that are equally as tight. Thankfully the GTR Lighting bulbs have a lifetime warranty anyways so you’re covered.
Can you please test high beam bulbs for a 2016-2017 Ford Explorer? If you need a part number to order an assembly I can provide one. The 2016-2019 Explorers already have an LED low beam from the factory.
I have the ford performance level 2 package. My question is, since I have the fox leveling kit on my low beams are aimed a little higher. Is there a way to adjust the angle of the headlight beam?? I really want to get those GTR LED bulbs, but on that same note I don't want to blind everyone off the road.
You will totally be able to adjust those, that adjustment is made on the back of that headlight housing, and has nothing to do with the bulb. We have a video on this, I have linked that for you here: th-cam.com/video/OIow5YgdRro/w-d-xo.html
The beam pattern looks terrible. I suspect oncoming cars won’t appreciate your LED lights. I had the same issue with my Honda CR-V. I ended up reinstalling the stock headlight bulbs
Man, that is a bummer that you had issues with these, we sure don't see the same thing! With that cutoff line, you willl not have any light you need to worry about going into the oncoming traffics eyes, they will not be able to see that light below the cutoff line unless you have it aligned improperly!
You will not have to worry about that at all, they are totally designed to function in that headlight housing! Let us know if you have any other questions!
Ford ranger reflector housing is so trash when it comes installing a LED replacement. The beam pattern is very ugly on the floor and not clean or wide My friend did a modification by installing projectors in the housing but it is very costly =/
@@HeadlightRevolution id believe it... Its an ongoing thing with most vehicles... CAD Engineer says itll fit... Mechanic asks what else has to come out first? 😂😂😂
Dis you guys know if this lights work with the Ford Ranger Version for Latin America cause it has a similar headlamp but i dont know if they work the same as the US versión
The fog lights on this truck take H11 bulbs, I would recommend the GTR Ultra 2.0! www.headlightrevolution.com/h11-h8-h9-ultra-series-bulbs-LED.BUL.H11.ULTRA_2
@@HeadlightRevolution The GTR CSP Mini is not a DOT legal Headlight bulb. It's clearly labeled as fog light only on GTR's own site. Yet ou have that clearly labeled on Retrofit Source, but it isn't mentioned on HeadlightRevolution. Any reasoning you're selling and heavily promoting bulbs that aren't technically legal as headlights? If someone installs these bulbs in a state/city that requires inspections, it could cause a vehicle failure or if a cop really wants to be an ass, get someone a ticket...
With these headlights, if you have a DRL Low Beam, you willbe good to go, but with a DRL high beam youwill have issues. Let us know what version you have on that vehicle and we will go from there! Thank you for your time and have a great day!
If that is the case, you will just need to get a pair of the PWM modules with those low beams, that will correct for the flickering youget when installing LEDs into those voltage drop DRLs. I have linked those modules for you here: www.headlightrevolution.com/gtr-lighting-pwm-hid-kit-modules-ACC.PWM5202.MOD_2?quantity=1
Thanks for commenting, and for your support! I have linked the headlight options for your vehicle below, if you have any other questions just let us know! Have a great day! Low Beams: www.headlightrevolution.com/2019-2020-ford-ranger-reflector-low-beam-gtr-lighting-csp-mini-?quantity=1 High Beams: www.headlightrevolution.com/2019-2020-ford-ranger-reflector-high-beam-gtr-lighting-ultra-2-led-bulbs-?quantity=1
Ford 2015 Super Crew High and low beams and fog lights .. I'm in rural areas, mostly back roads and I have the tendency Of avoiding hitting Animals, Please help.. I have standard lights in my Pick up Thanks . 😊
We ave tons of options for your vehicle, but if you are looking for the best of the best, the Morimoto XB LED Headlight housings will be the ones to go with by far! They come with a lifetime warranty, mount to the same points as the factory headlights, and are completely plug and play with that factory wiring! Not to mention the fact that everything in them is LED right out of the box, so no need to deal with installing bulbs or annoying resistors! I linked those bad boys for you here, and if you get some on order make sure you add the coupon code ECLEDT10 for a free pair of T10 bulbs for your license plate lights or cargo lights! Link: headlightrevolution.com/2015-2017-ford-f-150-xb-led-headlights-with-white-drl/ I have linked the fog lights and taillights for you as well! Fog Lights: headlightrevolution.com/2015-ford-f-series-xb-led-fog-lights/ Taillights: headlightrevolution.com/2015-ford-f-150-xb-led-tail-lights/
You can find these bulbs here! Low beams: headlightrevolution.com/2019-2020-ford-ranger-reflector-low-beam-headlight-gtr-lighting-csp-mini-led-headlight-bulbs/ High beams: headlightrevolution.com/2019-2020-ford-ranger-reflector-high-beam-headlight-gtr-lighting-ultra-2-led-headlight-bulbs/
You will totally be good to go with those LEDs, nothing to worry about as far as heat goes, as they are designed to be installed inside those headlight housings! The little fan will keep the housing from being filled with hot stagnant air, so you are good to go!
@@HeadlightRevolution Im considering purchasing them, but I have had very bad experiences with other cars, thanks for assuring me these will not melt my wires.
But problem the housing is reflector I installed mine and eventually go back to a halogen. The beam pattern is very ugly with darkspots in between on the ground Short distance testing is alright and unable to notice. but when you go out in the dark and will see the ugliness
I got the gtr bulbs installed them for my low beam headlights definitely worth the purchase I think the truck should of came with these from factory a really helpful tip for anyone who is replacing these bulbs 💡 the passenger side bulb for the low beam is going to be a tight fight so wear gloves also due to the design it won’t rotate the bulb all the way so you will need to unplug the bulb from the harness then remove the bulb then when putting the bulb back on you will need to install bulb first then plug the harness hope this is helpful to someone
First time viewer, I really like this channel. Found exactly what i was looking for. Would it be possible to post a list of your ranger replacement bulbs, both headlights and fog lights? Keep up the great work
Your channel and vids are the best. Just bought a Ranger and this vid saved me allot of headache. Seriously.
Great to hear!
I was excited to find this video. It is really helpful information. I am bummed that this is the only video you made with the Ranger. I scrolled through your channel's entire video list and didn't find any new Ranger content.
More to come!
Glad you liked this video though!
is it a reliable truck? worth it the money? thanks four ur responses!
Damn those CSPs are the only way to go for modern Ford trucks. I installed them in my '15 F-150 for both low and high beam and they're amazing, good to know they also fit the Ranger and look just as amazing.
Thanks for the feedback
Is it safe to say that these aren’t too blinding? They don’t look like they’re overdone or over bright
The install for the high beams on the Ranger is really hard. My hand is scratched all over and I had to keep tweaking a bulb to get it aligned. Also, the fit is not as tight as the originals. I fear in a few hundred miles of bouncing around they will come loose.
Yes, the manufacture does not make it easy
Just a suggestion, pls do a video on the road like asphalt so we can see the actual output and brightness. Thank you
We are going to start trying to do that more with these videos.
Wild it fit the 2019 ford ranger wildtrak
When you insert the bulb, do they sit straight? Or in a diagonal? Mine are sitting in a diagonal
Glad he told me to pop the hood first.
I know right. 😂
Looks great. I’m definitely taking your recommendations, and want to also update my fog lights, just want to make sure I get right... Same bulb in fog as low beam yeah?
That is correct!
Are the tabs correct so that the bulb will orientate to the 9/3 position? Thanks.
I have a 2023 ford ranger with halogen lights.....if I buy these, won't I need an anti flicker module to go with it so there isn't any problems?
So you used these on fog lights and headlights. No kits needed ??
Really enjoying the increased visibility from these on my 2020 Ranger. Do the fog light LEDs need to face 9 and 3 as well? I cannot find much guidance on that.
The fog lights should face 9 and 3 as well!
We're glad you're happy with your purchase!
Looks like they did something right. They kept changing a headlight bulb easy. I do love ford's for so many reasons. My 07 Ranger is easy peasy when I have to change lights on it. Some cars it's a project.
Amen!
Changing the headlight bulbs in my 2016 F-350 is a royal P.I.T.A. I'm hoping that it won't be that difficult on my 2022 F-350 with the quad led headlights. At least I don't have to completely disassemble the front of my wifes 2020 Ranger to replace the oem bulbs.
I may or may not want headlights that will give the person in front of me an x-ray when they drive slow in the fast lane. What should I get if that was what I wanted? Theoretical question of course 👀 2019 Ford Ranger lariat
XB LED Headlights, easy!
Would you happen to know the lux measurements for the factory LED lights equipped on the Lariat? I am curious if swapping out the entire headlight assemblies would be worth the nearly $2000 price tag vs swapping some good LED replacement bulbs such as the GTRs you show here.
I am sorry to say that we do not have the Lux measurements for those headlights, but I can tell you that the OEM LED headlights will perform better than just a simple bulb replacement! They are of course much more expensive, so for that little bit of an increase this may not be worth it for you.
But problem is the housing is reflector
I installed mine and eventually go back to a halogen. The beam pattern is very ugly with darkspots in between
Short distance testing is alright and unable to notice. but when you go out in the dark and will see the ugliness
I know mine where plug n play but it had to be adjusted. The led needed to be pointed left and right so the beam pattern can look good. I had to do it on both side of the headlight. i have not tried the high beams yet but one day i will.
The bulbs we show in this test did very well at night, Many others did not.
Question. Do you need to install CANBus kit? I heard Ford's BCM kit is very sensitive.
These are a direct plug-and-play with our LEDs.
I saw that they cone with an adjustment tool. Did you have to adjust it or was it good out of the box?
For the low beams, the bulb will require a slight adjustment to get the LED chips facing directly left and right.
Headlight Revolution thnx.
You're very welcome!
@@HeadlightRevolution how do you adjust a bulb?
Do these need an interface module of any sort on a 2019-2020 Ford Ranger so they do not throw a light on the dash or flicker or send a false current signal to the bcm?
I have linked those kits on the website for you below, you will not need any extra modules for them to work peroperly! Let us know if you have any other questions, we are here to help! Have a great day!
Bit of a dumb question.
My car is an old car (1995 Mercedes E320) whose beam pattern is set by the headlight lens, not the reflector. Is there a LED upgrade which would be applicable for my car?
I've seen other cars where they've clearly "upgraded" to LED and their beam pattern went everywhere but down the road. I'd like to prevent that if I can.
Thanks.
When I purchased it came with another wire do I need to use that on the 2019 ford ranger ?
There shouldn't be any extra wiring. Reach out to our customer service team with a picture of what you received, and well be able to figure out what you received!
Sales@HeadlightRevolution.com
I'd like to know what other bulbs you tested.
We have other bulbs tested in that video for that vehicle, but if you are looking for other bulbs altogether, then you would want to check out this video linked here: th-cam.com/video/LT-s4Eg7cyw/w-d-xo.html
Just bought these exact ones. Is an alignment necessary?
You should not need to re-aim the lights!
I have the lasfit H11's and noticed they won't adjust to 3 and 9 in my '23 Ranger
Some LEDs, the not-so-good-ones, won't allow you to adjust them. Horrible design 😔
@@HeadlightRevolution I'm going to return them. What would you suggest be my best option that's adjustable and puts out decent light without glare to oncoming traffic?
Do you have a kit with all the LED lamps to change out.
We don't have full kit but we do have plenty of options on our website!
www.headlightrevolution.com/search?keywords=ford%20ranger
Because of the halogen reflectors, will this create glares causing issue for on coming drivers?
They will not. These bulbs do a very good job at replicating the halogen bulbs beam pattern and do not produce glare.
@@HeadlightRevolution your website clearly state these are not for street use as low beams? Isn’t that a little contradicting?
What light did you choose for high and low beams , Ford Ranger 2019, thanks..
That was the GTR Lighting CSP Mini for the low beam, and the GTR Lighting Ultra 2 for the high beam!
how long do they last???? for 151 they better last 5 years
When you order does it already come in a pair for both sides or do you have to spend 150$ twice?
That price is for a pair. You will get two bulbs.
The price is per pair.
So the bulb that fits in the low beam will also fit in the fog lights?
That is correct, the same H11 bulb will be used in the fog lights! Let us know if you have any other questions!
what was the aftermarket brand you tested against?
I honestly do not know the name, that was just some eBay LED bulb that we tested it against! Sorry about that!
Hi I’ve installed some led bulbs in my 2017 ford ranger but the low beam is playing up, it will shine for 5 seconds then switches off.
Any advice?
I’ve also put some extra filters but it doesn’t help.
Try some PWM modules!
www.headlightrevolution.com/gtr-lighting-pwm-hid-kit-modules-ACC.PWM5202.MOD_2
Does the CSP Mini support the low output DRL mode on the Ranger? Or will it just shut off or flicker because of the lower voltage?
That will not work with that voltage drop DRL, so you will need to turn that function off in the computer.
I have a 2021 ford ranger XLT. Are all GTR bulbs plug and go? Or is there something that needs to be deleted or do you need power packs??
It is plug and play!
How come your lights come with a little box on wire. Mine doesn’t bring the little box you Tucked away?
The little box is the LED driver. Every LED bulb needs a driver. Some are built into the bulb, some are external. Those drivers can just be tucked away.
Would it works for the ford ranger 2018?
If not, would you show me wich one will? Thanks!
This should work for the 18 Ranger as well! Let us know if you have any other questions!
What bulbs would you recommend for a t6 generation wildtrak?
Reaching out to our CS team would be the fastest way to get some help, give us a call or email!
218-755-5200
Sales@HeadlightRevolution.com
Hello. is it recommended to install canbus before installing LED bulb in the headlight?
It all depends on the vehicle, what vehicle do you have?
@@HeadlightRevolution Ford ranger XLT ( asian model / thailand made ). thank you
We haven't confirmed if the Asian models need any canbus modules, but realistically, it shouldn't!
I have a 2020 FX4 Lariat any headlight bulb upgrade?
We sure do!
Low: www.headlightrevolution.com/2018-2019-ford-f150-ultra-2-led-low-beam-bulbs_2
High: www.headlightrevolution.com/2018-2019-ford-f150-ultra-2-led-high-beam-bulbs_2
Fogs: www.headlightrevolution.com/2018-2019-ford-f150-ultra-2-led-fog-light-bulbs_2
Is there a cheaper led lights that will work for the regular ranger headlights
We have tons of options! Check them out here!
www.headlightrevolution.com/search?keywords=ranger
Hey guys. What would I need for a 2020 xlt sport ranger. I have fog lights, drl’s, high beams, low beams? I’m just getting confused on what to use for the drl’s. Thanks
Thanks for commenting, I am happy to help with this! For that vehicle, I have linked all the options that we carry below, if you have any other questions just shoot us an email! Sales@HeadlightRevolution.com
Link: www.headlightrevolution.com/buyer-guide-by-vehicle/2020+Ford+Ranger_with_Halogen_Headlights
I tried ordering these for my ford ranger it wouldn't let me. There's a section on your page to click on for DOT purposes I clicked on "headlights vehicles with license plates" then immediately the buy button goes grey and won't let me click on it.. what am I doing wrong? I'm just trying to buy some low beam headlight. For my 2020 ranger.
Well they’re not street legal according to the website. Now if you were to hypothetically order these lights for a Ford Ranger that was not intended for on road use and happened to mix up the two trucks.... just select the one for no license plate
The LEDs and HIDs are not legal for street use, if you would like to get those on order you will have to select that they are for vehicles without registration! Let us know if you have any other questions!
@@HeadlightRevolution Not being a jackass, but I have a 2020 Ford Ranger XLT Sport and I want these for my low beam, so I need to "lie" on the website in order for me to buy this? My truck IS registered with the DOT and has a license.
I am worried about having a fan/heatsink inside the headlights with the dust caps on. Will it melt the dust cap or give any problems to my headlights?
Nope! Not at all!
Awesome! Just ordered mines. Thanks for the quick reply 👍🏻 👍🏻👍🏻
Would there be concerns regarding cooling/ventilation when installing the dust cover over the heatsink?
It really hasn’t been an issue on other vehicles that are equally as tight. Thankfully the GTR Lighting bulbs have a lifetime warranty anyways so you’re covered.
Hi HR, does these bulbs fit on a Ford Ranger XLS sport 2020? And do you know if can ship to Australia? Thanks!
They sure do, and we sure can ship to Australia!
Can you please test high beam bulbs for a 2016-2017 Ford Explorer? If you need a part number to order an assembly I can provide one. The 2016-2019 Explorers already have an LED low beam from the factory.
Send us an email to Sales@HeadlightRevolution.com and we’ll go over a few options with you for your Explorer, we’ve messed with them off-camera here!
Would I need to put on resisters for these bulbs?
Nope, resistors are not needed!
I have the ford performance level 2 package. My question is, since I have the fox leveling kit on my low beams are aimed a little higher. Is there a way to adjust the angle of the headlight beam?? I really want to get those GTR LED bulbs, but on that same note I don't want to blind everyone off the road.
You will totally be able to adjust those, that adjustment is made on the back of that headlight housing, and has nothing to do with the bulb. We have a video on this, I have linked that for you here: th-cam.com/video/OIow5YgdRro/w-d-xo.html
I had the same issue, i had Ford instal it and returned to have them ajusted.
The beam pattern looks terrible. I suspect oncoming cars won’t appreciate your LED lights. I had the same issue with my Honda CR-V. I ended up reinstalling the stock headlight bulbs
Man, that is a bummer that you had issues with these, we sure don't see the same thing! With that cutoff line, you willl not have any light you need to worry about going into the oncoming traffics eyes, they will not be able to see that light below the cutoff line unless you have it aligned improperly!
Do you need to worry at all about excess heat from the heat sink on the back of the bulb melting the dust cover's plastic?
You will not have to worry about that at all, they are totally designed to function in that headlight housing! Let us know if you have any other questions!
Thanks good video
Glad you liked it!
How do you change the rear lights
We don't have a video on this just yet, sorry!
2011 ram alpha Rex headlights which low beam led bulb is better? I never seen them tested yet? Please find one
We are going to start doing some Alpharex testing soon here.
Headlight Revolution alright I’ll be on the lookout for it
Ford ranger reflector housing is so trash when it comes installing a LED replacement. The beam pattern is very ugly on the floor and not clean or wide
My friend did a modification by installing projectors in the housing but it is very costly =/
Hey guys, if you pull the headlights, would you be able to reinstall the dust cap?
We actually have a spare headlight and even with it removed from the vehicle it’s still a tight fit with the dust cover. It’s a tricky headlight.
@@HeadlightRevolution id believe it... Its an ongoing thing with most vehicles... CAD Engineer says itll fit... Mechanic asks what else has to come out first? 😂😂😂
are these street legal/ is it going to blind everybody else on the road?
The bulbs haven't been tested by the DOT yet, put you can purchase them. It all depends on local state law.
Dis you guys know if this lights work with the Ford Ranger Version for Latin America cause it has a similar headlamp but i dont know if they work the same as the US versión
Not sure, I would assume they wouldn't be too vastly different!
is it the same as the 2017 ford ranger wildtrak 3.2 6 speed?
Looks to be the same for that model as well! Let us know if you have any other questions, have a great day!
Isn't replacing your lowbeams in the United States with LED against DOT laws?
For on road vehicles it is!
What kind of bulb goes in the fog lights ?
The fog lights on this truck take H11 bulbs, I would recommend the GTR Ultra 2.0!
www.headlightrevolution.com/h11-h8-h9-ultra-series-bulbs-LED.BUL.H11.ULTRA_2
@@HeadlightRevolution just got them but is their no ballast anymore ?
@@HeadlightRevolution The GTR CSP Mini is not a DOT legal Headlight bulb. It's clearly labeled as fog light only on GTR's own site. Yet ou have that clearly labeled on Retrofit Source, but it isn't mentioned on HeadlightRevolution. Any reasoning you're selling and heavily promoting bulbs that aren't technically legal as headlights? If someone installs these bulbs in a state/city that requires inspections, it could cause a vehicle failure or if a cop really wants to be an ass, get someone a ticket...
Just waiting on morimoto to make some projector assemblies for these trucks.
They are coming from what we have heard, should be here some time this November!
Headlight Revolution Nice. Lots of XLT rangers out there. Should be a good seller.
Can I still use the drl function with these headlights?
With these headlights, if you have a DRL Low Beam, you willbe good to go, but with a DRL high beam youwill have issues. Let us know what version you have on that vehicle and we will go from there! Thank you for your time and have a great day!
@@HeadlightRevolution I have the 19 ranger xlt with the low beam DRL I believe.
If that is the case, you will just need to get a pair of the PWM modules with those low beams, that will correct for the flickering youget when installing LEDs into those voltage drop DRLs. I have linked those modules for you here: www.headlightrevolution.com/gtr-lighting-pwm-hid-kit-modules-ACC.PWM5202.MOD_2?quantity=1
Can you send me all the information you did I'm going to upgrade my bulbs I'll be buying all my stuff through you guys thanks
Thanks for commenting, and for your support! I have linked the headlight options for your vehicle below, if you have any other questions just let us know! Have a great day!
Low Beams: www.headlightrevolution.com/2019-2020-ford-ranger-reflector-low-beam-gtr-lighting-csp-mini-?quantity=1
High Beams: www.headlightrevolution.com/2019-2020-ford-ranger-reflector-high-beam-gtr-lighting-ultra-2-led-bulbs-?quantity=1
Thank you very much
Not a problem, shoot us an email if you have any other questions!
Sales@HeadlightRevolution.com
Can you do a ford eagle 2017
Send us an email to Sales@HeadlightRevolution.com and we’ll go over a few options with you for your vehicle.
Will these fit a 2020 Ford Ranger xlt
These will totally fit a 2020 Ford Ranger!
What about a 2021 ranger xlt? Does the 2021 use the same high beam and low beam as the 2019 & 2020?
Ford 2015
Super Crew
High and low beams
and fog lights ..
I'm in rural areas, mostly
back roads and I have the tendency
Of avoiding hitting Animals,
Please help..
I have standard lights in my
Pick up
Thanks .
😊
We ave tons of options for your vehicle, but if you are looking for the best of the best, the Morimoto XB LED Headlight housings will be the ones to go with by far! They come with a lifetime warranty, mount to the same points as the factory headlights, and are completely plug and play with that factory wiring! Not to mention the fact that everything in them is LED right out of the box, so no need to deal with installing bulbs or annoying resistors! I linked those bad boys for you here, and if you get some on order make sure you add the coupon code ECLEDT10 for a free pair of T10 bulbs for your license plate lights or cargo lights! Link: headlightrevolution.com/2015-2017-ford-f-150-xb-led-headlights-with-white-drl/
I have linked the fog lights and taillights for you as well!
Fog Lights: headlightrevolution.com/2015-ford-f-series-xb-led-fog-lights/
Taillights: headlightrevolution.com/2015-ford-f-150-xb-led-tail-lights/
[;ease cmpare the csp mini 9012 from ultra series 2 9012. just wanna see the difference.
The Ultra Series 2 is significantly brighter. It’s fan cooled and can therefore be run harder.
Please do Ford Ecosport
We will see what we can do! In the meantime, Send us an email to Sales@HeadlightRevolution.com and we can get you exactly what you need for your Ford.
I would like to order these from you, so What are the exact Serial Numbers for these LED High and Low Beam replacements shown on this Video?
You can find these bulbs here!
Low beams: headlightrevolution.com/2019-2020-ford-ranger-reflector-low-beam-headlight-gtr-lighting-csp-mini-led-headlight-bulbs/
High beams: headlightrevolution.com/2019-2020-ford-ranger-reflector-high-beam-headlight-gtr-lighting-ultra-2-led-headlight-bulbs/
Looks like they will melt your wiring considering there is no ventilation with the dust cover sealed. pass.
You will totally be good to go with those LEDs, nothing to worry about as far as heat goes, as they are designed to be installed inside those headlight housings! The little fan will keep the housing from being filled with hot stagnant air, so you are good to go!
@@HeadlightRevolution Im considering purchasing them, but I have had very bad experiences with other cars, thanks for assuring me these will not melt my wires.
Right on, glad I could help you with that! Let us know if you have any other questions!
Ok popping hood first step,darn glad he told me that,lol,guys if you dont already know this ya dont need to be touching anything on the truck,lol
i donno i like the stock ones better.
Nahhh!
mine has a H7 connector not h11 in low beams the fuck ...
That’s strange, Do you have aftermarket lights? Factory LED?
WAS NOT A BULB COMPARRISON NOR DID IT LIST THE BEST BULBS FOR THE RANGER,WASTE OF TIME WATCHING!!!!
But problem the housing is reflector
I installed mine and eventually go back to a halogen. The beam pattern is very ugly with darkspots in between on the ground
Short distance testing is alright and unable to notice. but when you go out in the dark and will see the ugliness