So If I ssned the design of the light shelf n my room and one in hallway , you can determine all tehe parts I need. Are these run by a remote controller or is there an Androir phone App?
One thing i have 2 rolls but one dose not match the other white red blue is fine but other one can be yellow other is green ect so how do i fix so both rolls match ?
I have a two questions: 1.- This control is (Extra Controller 5050HCL3012V) or (5V Crazy Lights Extra Controller 5050HCL325V)? 2.- Works with generic strips RGB 300 Leds, or only with your model strips RGB whit 150 Leds? Help me, please!
They come with power supplies that you plug into a standard wall outlet but if you just want to run them off your own 12v power supply each roll needs 12VDC, 3AMPS. Just times amps by volts to get watts. So if you have a 4 roll system it needs 144 watts. Ledlightshack.com
thank you i have had them ages but never got around to using them,i tested when they first come but dont seem very bright,can you recommend any power supplies thanks again
If you buy a complete system, it comes with one power supply and a Y splitter for every 2 rolls of lights. If you want to use your own large power supply to power all the lights, you can do that as long as the power supply is 12VDC and as long as it has enough amps. At least 3amps for every roll. 12amps for a 4 roll system. Also you would have to split the power so you have 12vdc power going directly to each roll of lights
cbm831 does that mean these are analog, not digital? Also, i think you can purchase a sound sensor, cant you? Although this would be different than plugging the sound directly into a computer to a program or something.
Thank you awesome job on explaining how everything works.. one of the first videos I've seen that someone actually breaks it down to the average DYIer
nice....
can this work with few meters of led only..
let say i need only 1.5meter of led on both channel
Is there a manual for the remote control? What are the functions of the buttones besides changing the program?
So If I ssned the design of the light shelf n my room and one in hallway , you can determine all tehe parts I need. Are these run by a remote controller or is there an Androir phone App?
I’ve had these lights for over 7 years and they are still working well! I’m having a hard time finding a second roll and a separate power supply
Can these be controlled by a Lutron Caseta dimmer switch
You also send to Europe belgium ...?
what size wire are you using to power the second 5 metre section ??
One thing i have 2 rolls but one dose not match the other white red blue is fine but other one can be yellow other is green ect so how do i fix so both rolls match ?
Can these lights work in a car install
Hi I just a led 5050 strip light , it works well , but upon switching on it keeps flashing .what to do to make it light steady . your advice please
The power supply capacity is no enough.
contact me whatsapp: 0086-13684976052
I have a two questions:
1.- This control is (Extra Controller 5050HCL3012V) or (5V Crazy Lights Extra Controller 5050HCL325V)?
2.- Works with generic strips RGB 300 Leds, or only with your model strips RGB whit 150 Leds?
Help me, please!
Can this kit be applied to a vehicle setup? As in the wheel wells?
no
Y
thank you this is the most precise video on youtube thanks for that
superb video, how many watts power supply do i need for 4 @ 5m lights thanks
They come with power supplies that you plug into a standard wall outlet but if you just want to run them off your own 12v power supply each roll needs 12VDC, 3AMPS. Just times amps by volts to get watts. So if you have a 4 roll system it needs 144 watts. Ledlightshack.com
thank you i have had them ages but never got around to using them,i tested when they first come but dont seem very bright,can you recommend any power supplies thanks again
Also if you do your own power supply, each roll of lights needs 12VDC power going directly to it
i noticed that on your video so big question do i buy one big brick which all seem to have 3 outs or do i buy separate supplies @3 amp each
If you buy a complete system, it comes with one power supply and a Y splitter for every 2 rolls of lights. If you want to use your own large power supply to power all the lights, you can do that as long as the power supply is 12VDC and as long as it has enough amps. At least 3amps for every roll. 12amps for a 4 roll system. Also you would have to split the power so you have 12vdc power going directly to each roll of lights
Hey. Do you ship the system to denmark?
+mir4bih
Vi säljer dessa i Sverige, skriv meddelande till oss.
ship to all over the word, contact me: 0086-13684976052
Hi, this control works in strips RGB 300 leds 5050?
+Jonathan Illescas Campos No it will not work unless you have a led strip with built in IC.s
What model is this?
Fantástic tutorial and clear instructions.
Hola desde Panamá, te dras un tutorial en español
what's ic
a component chip
Sorry, currently there is no way to sync with music. Should that change we will update that on our website www.ledlightshack.com
cbm831 does that mean these are analog, not digital? Also, i think you can purchase a sound sensor, cant you? Although this would be different than plugging the sound directly into a computer to a program or something.
Please your language in Hindi