Hello from England! I've just done exactly what you have and bought a very similar dinghy to you , a honwave 32 with a 6hp on the back , did 13knots ( about 15 mph) with only 2 of us, tie it on the bigger boat and explore. What you do need is an 12v electric pump to inflate it , ours takes 10 mins with no effort! Stay safe and have fun , love watching miami on a rainy day in England!
Some help for putting the boat together so you aren’t using screwdrivers where they don’t belong,,, 😂. Arch two of the plates in the middle but make sure the boat has less air in it. Then push them flat making sure you are in the grooves of each panel. THEN the bars on the side go in at that time. One side at a time. The bars have to overlap the 3 aluminum panels. 1/2 each of #2 and #4 and all of #3. The boat will be even more rigid and much safer to use that way. Once the floor is in, then you can finish airing up the boat. There are videos that show you how to do this. They used to give directions for those boats, but not anymore it seems. I just got another one as I like different sizes for different uses. Mine is 9 feet and a different company, yet it was packed identically to yours!! 😂😂 I hope the boat gives the family loads of fun and great service!
Looks like you all have a new water toy to get around on, but it looks like it will do the job for you when exploring around some of the areas that you go too keep staying safe
That thing is pretty badass!!! And ya know it’s really really sad that, where u guys put that dingy in and took it out of the water, there was soooooooo much trash along that whole shoreline!!!! I wish I would’ve been there because I would’ve tried picking ALOT of that trash up!!! I mean hell there was even a cars front bumper on that shoreline, I mean come on people throw ur stuff where it freaking belongs which is in a trash can that way it can go where it needs to go and not into the lakes, rivers, or the oceans!!!!! But other then that crap, I loved the video and can’t wait to see what kind of adventures u guys take on it!!!! Congrats on the new dingy!!!
There is so many signs there to not throw trash away. This is in Hialeah. It’s called lost lakes. Been there a few times to pick up trash. People seem to not care about the environment.
Also, raise a middle jointin the floor - two panels where they meet and connect the joint, then gently push both panels down, which pushes the fore and aft panels into place. No screwdrivers.
Need to assemble all floor panels and side joiners with a defleated boat, lessons learned the hard way., that's what the Ownwer's Manuals are for. Motor must sit on transom while at 90 deg, that's fully perpendicular to the water level, if not the boat will have an up bow attitude.
Great set up and spending quality time with the lads, ive got a 4m Tohatsu sib with a 9.8hp Tohatsu motor which is great for getting me and my son out fishing here on the west coast of Scotland.
Nice dinghy guys! I have a smaller one with an older 3.3 Mercury on the back. It works well for its purpose which is the same as you guys...exploring and getting to the beach or heaven forbid, as a life saving vessel! Here's a little tip for ya...blowing it up or even taking the air out....a shop vac can do it all! That's ALL I use for airing up or down....SOOO easy and done in seconds! Good luck and don't forget to name it something cool....I'm thinking "Little Deal"!!!
I know the directions could have been way better but they did offer some help. I put one together yesterday. You over-inflated the tubes making the floor install more difficult. You inflated the tubes in the wrong order-clockwise from the starboard side is correct. It very much appears the aluminum floors were put in upside down. It matters whether the rivet heads are up or down. Study the side edges, they are different and there is a top and a bottom. The floor side-stiffeners seemed to be used only on the rear 2 pieces--they are supposed to bridge all 3 aluminum pieces. Nix the damn screwdrivers--no tools are needed--you arch 2 adjacent pieces up enough to engage the tongue & groove ends and then mesh them together as you press them down. I hope you are aware it requires a state registration in FL if used with a motor.
When you put the bottom part on, the boat needs to be semi-inflated, maybe halfway, once you put the bottom part on, the boat inflates to what is required.
The air floor is better lighter and get on plane faster helps get more speed and way easier to fold up tho for me the almium floor it doesn’t allow the dingy to get on plane faster and has weight to it fact
Love all of your videos. Great stuff, keep doing it. Just want to ask, in this video I noticed a lot of rubbish lay around by the lake. Is this where everyone gets rid of garbage? by the lake? Wouldn't make a good tourist video!!
Fresco trata, Digo si quieres ..de montar el motor yamaha cuando llegues al agua Porque puede hacer daño al espejo de atrás cuando hace fuerza en la carretera..y se puede caer o safar...saludos
Yo you gotta actually wear your life jackets on a dinghy lol. Also, attach the engine lanyard to yourself when you’re operating the outboard. Safety needs improvement.
Buy an electric pump to inflate faster or else it’ll take some time and inflate the black thing first at the bottom then put the floor and we have the same dinghy and 9.9 motors
I have the album floor amd get on plane just fine tho 15 h p motor amd get a bigger one tho to smal for 3 people get the registration to and loose jackets they are required tho I got a 15 ft Saturn boat amd take it out to the ocean and lake a lot tho
I’m not knocking your video…. But just seeing all that trash on the beach was very disappointing. I wouldn’t feel safe taking my shoes off in that area…
You could have spent the extra fifty bucks for the electric pump. Everybody who owns one of these and never bought the electric pump always ends up buying one sooner or later.
![Amazon BRIS Dinghy - Breakdown and Pack-up [Full Tutorial & Time-lapse]](http://i.ytimg.com/vi/p410x6tZke8/mqdefault.jpg)
![Amazon BRIS Dinghy - Breakdown and Pack-up [Full Tutorial & Time-lapse]](/img/tr.png)
Life jackets brother!!!
I can swim
You get what you pay for ! Your life depends on how good the Chinese glued the seams on that boat ! GOOD LUCK AND GOD BE WITH YOU !
LOL. I know you have an air compressor somewhere in that garage Fresco. Way to make the boys work.
Hello from England! I've just done exactly what you have and bought a very similar dinghy to you , a honwave 32 with a 6hp on the back , did 13knots ( about 15 mph) with only 2 of us, tie it on the bigger boat and explore. What you do need is an 12v electric pump to inflate it , ours takes 10 mins with no effort! Stay safe and have fun , love watching miami on a rainy day in England!
Very cool! Thanks for the info
Really nice for a lake ,enjoy,or around a small island,with definitely life jackets on ,have safe fun
Yes, thank you
Some help for putting the boat together so you aren’t using screwdrivers where they don’t belong,,, 😂.
Arch two of the plates in the middle but make sure the boat has less air in it. Then push them flat making sure you are in the grooves of each panel. THEN the bars on the side go in at that time. One side at a time. The bars have to overlap the 3 aluminum panels. 1/2 each of #2 and #4 and all of #3. The boat will be even more rigid and much safer to use that way. Once the floor is in, then you can finish airing up the boat.
There are videos that show you how to do this. They used to give directions for those boats, but not anymore it seems.
I just got another one as I like different sizes for different uses. Mine is 9 feet and a different company, yet it was packed identically to yours!! 😂😂
I hope the boat gives the family loads of fun and great service!
Looks like you all have a new water toy to get around on, but it looks like it will do the job for you when exploring around some of the areas that you go too keep staying safe
Yes, thank you
Guys, for your safety, please use the safety lanyard for the cut off switch.
Fresco,
Another toy for fun. Lucky children, we will have a lot of adventure, be happy.
Big hug
Thank you, i will
That thing is pretty badass!!! And ya know it’s really really sad that, where u guys put that dingy in and took it out of the water, there was soooooooo much trash along that whole shoreline!!!! I wish I would’ve been there because I would’ve tried picking ALOT of that trash up!!! I mean hell there was even a cars front bumper on that shoreline, I mean come on people throw ur stuff where it freaking belongs which is in a trash can that way it can go where it needs to go and not into the lakes, rivers, or the oceans!!!!! But other then that crap, I loved the video and can’t wait to see what kind of adventures u guys take on it!!!! Congrats on the new dingy!!!
There is so many signs there to not throw trash away. This is in Hialeah. It’s called lost lakes. Been there a few times to pick up trash. People seem to not care about the environment.
Thank you bro, and yes there is trash everywhere even though people are told not to specifically
you should fit the floor when flat or partly inflated :)
Also, raise a middle jointin the floor - two panels where they meet and connect the joint, then gently push both panels down, which pushes the fore and aft panels into place. No screwdrivers.
looking good,, thats the same inflatable i was looking to buy,, what is the length? thought i heard 10 ft
Need to assemble all floor panels and side joiners with a defleated boat, lessons learned the hard way., that's what the Ownwer's Manuals are for. Motor must sit on transom while at 90 deg, that's fully perpendicular to the water level, if not the boat will have an up bow attitude.
can you pls tell how many PSI we need for safe sailing? thx
It looks like u and your sons had an awesome time from the beginning.
Did yours come with everything you need to register it? Thinking about ordering the same boat
Nice video~But I find little problem~
You need to set up all alu board first, then side bracket, and side bracket need to hold all three alu board~
Great video! You looked like you guys were moving real good on the 9.9 outboard!
Thanks! 👍
Great set up and spending quality time with the lads, ive got a 4m Tohatsu sib with a 9.8hp Tohatsu motor which is great for getting me and my son out fishing here on the west coast of Scotland.
Thank you bro! That's cool, hope you guys enjoy!
Nice dinghy guys! I have a smaller one with an older 3.3 Mercury on the back. It works well for its purpose which is the same as you guys...exploring and getting to the beach or heaven forbid, as a life saving vessel! Here's a little tip for ya...blowing it up or even taking the air out....a shop vac can do it all! That's ALL I use for airing up or down....SOOO easy and done in seconds! Good luck and don't forget to name it something cool....I'm thinking "Little Deal"!!!
Thank you bro, that's cool
I know the directions could have been way better but they did offer some help. I put one together yesterday. You over-inflated the tubes making the floor install more difficult. You inflated the tubes in the wrong order-clockwise from the starboard side is correct. It very much appears the aluminum floors were put in upside down. It matters whether the rivet heads are up or down. Study the side edges, they are different and there is a top and a bottom. The floor side-stiffeners seemed to be used only on the rear 2 pieces--they are supposed to bridge all 3 aluminum pieces. Nix the damn screwdrivers--no tools are needed--you arch 2 adjacent pieces up enough to engage the tongue & groove ends and then mesh them together as you press them down. I hope you are aware it requires a state registration in FL if used with a motor.
How was this filmed? Drone?
Going a bit off topic. You might want to look into e-bikes. Another of land based fun. E - bike : Happy run tank HR 50
I like the new toy, enjoy and have fun. I believe you have to put the floor before you inflate it that way will be a lot easier.
Thanks for the tips!
Fresco, what kind of camera is that?
A gopro 360 camera
When you put the bottom part on, the boat needs to be semi-inflated, maybe halfway, once you put the bottom part on, the boat inflates to what is required.
anyone know what hp motor is rated to that dinghy just curious if anyone knows
Great video. Can i ask its price? I’m in Canada.
You always getting new toys my man...👍🏾
Wow where you launched your boat from is trashy looking. Do your lakes look like that down there?
No, the lake we visited was a man made lake near a construction site.
where the other two gonna sit?
Awesome video..im curious what lake were u in?
What lake is this one?
Great father and sons boat ride video Fresco 👨👦👦🚤
Yes, thank you
Very nice video. Where is that lake located?
Thanks, it is this lake called Lost lake
fresco buenas tarde una pregunta que tipo de documentos se necesitan para tener un inflable de ese tipo
Must be nice to have that kind of money for those toys in the garage. I got to save a whole year or so to rent one for a weekend. Thanks.
Thanks, work hard and never stop
What kind of camera are you using please
Love your videos
Thank you, i use a go pro 360 and go pro hero 8
The air floor is better lighter and get on plane faster helps get more speed and way easier to fold up tho for me the almium floor it doesn’t allow the dingy to get on plane faster and has weight to it fact
Don't forget to strap the outboard to the transom.. seen a few videos of people losing their motors..
After a while the kids are gonna use it as their personal jet ski lol.
Love all of your videos. Great stuff, keep doing it. Just want to ask, in this video I noticed a lot of rubbish lay around by the lake. Is this where everyone gets rid of garbage? by the lake? Wouldn't make a good tourist video!!
Thank you, yes it is really full of garbage
Nice!! But you need to invest in an electric pump...lol :) I am sure you got your exercise
Bradda where your PFD’s 🤙
They were on the boat in the bag that said Life Jackets
How much for that dinghy fresco?
That is nice 😎 look like the Fresco familia is going to have fun with the ding be safe guys ⛵
Thank you
It seems they all come out of the same factory. I've got exactly the same boat just a different name
Fresco where are you guys vests....????
On the boat. You can see them if you look closely
Fresco trata, Digo si quieres ..de montar el motor yamaha cuando llegues al agua Porque puede hacer daño al espejo de atrás cuando hace fuerza en la carretera..y se puede caer o safar...saludos
Gracias amigo
Capitan la proxima vez trata poner los paneles del piso antes de llenar completo el dingui y mucho mas facil.😎🛥️
She rides real nice 9.9 Yamaha will run forever
Where is the life jackets?
Tell me how you shot that it looks like you have a camera in hand. But you can’t see it amazing 🤷♂️🤷♂️🤷♂️🤷♂️
Great family fun me and boys go out on lake merwin in Washington state and kokanee fish in 12ft Aluminum boat
Very cool! Thank you
Yo you gotta actually wear your life jackets on a dinghy lol. Also, attach the engine lanyard to yourself when you’re operating the outboard. Safety needs improvement.
That's awesome bro. Thanks for the Vid.
No problem 👍
How much you paid I. Total
7:15 don't know how long you had the shoe on, but this is a health hazard for your ankles and knees, warm feet in water right away in dangerous.
Just put my zodiac cadet with a 20 horse on a trailer today...Time to go fishing.
Good music in the video too!
Sweet! Yeah buddy!
Rock on!
Buy an electric pump to inflate faster or else it’ll take some time and inflate the black thing first at the bottom then put the floor and we have the same dinghy and 9.9 motors
You need to register that
Little boat
I did just after this video
Where is the rest of the family?
Love your. New. Ride
Bro 5 people ?
Not eating sausages, lol
Dale cuidense familia.👍🏼
Gracias amigo
New subscriber here looking forward to seeing more awesome videos 👍👏
Awesome! Thank you!
Not sure it's made for five.???
I just noticed all the garbage laying around the lake ,such a shame .
That's was 😎 long pond Pennsylvania
Put floor in while it partially inflated
Look out my friend when pulling on concreet/stones
Nice island hopper thou
Yeah it is
Install the floor boards BEFORE you inflate anything. And do the bow, then stern, finally the center two boards.
Is. That. A 4. Stroke
yes
Nice engine
Very nice
Thanks
Bist regards from my heart ♥ 🌹🌹🌹🌹
Looks good for the kids looks small lay off the sausages lol
And with the air floor less stress or problems and lovey fact as I got the air floor get on plane better
I have the album floor amd get on plane just fine tho 15 h p motor amd get a bigger one tho to smal for 3 people get the registration to and loose jackets they are required tho I got a 15 ft Saturn boat amd take it out to the ocean and lake a lot tho
Love it
floor.... bad way dude. Why to see the instructions note?...
I was just going to say the same thing safety first lol
Sick!!!
That Yamaha is a pistol 🔫
Imagine 5 people in that!! lol
Skipped motor install
Wow that baby can move with 3 guys in there...Keep the screwdriver away from that boat !!!!
Good sir
I m ur fan ur videos vry good but my english no good
Where are your life jackets not a good example 😮
they were under our seats
@@frescochannel you can't wear them under there should be wearing them at all times
Excelente lanchita, se ve muy divertida hehe. I really like it, looks pretty fun! Saludos bro
#pescaenacciontv
Gracias amigo
Lot of garbage on beach dang
I said the same thing. Hope it's not drug users hideaway with spent needles. Wear shoes my man
Motor is too big for that small of a boat. 6hp would be enough
its recommended 9.9 and the max hp it could take is 15
I’m not knocking your video…. But just seeing all that trash on the beach was very disappointing. I wouldn’t feel safe taking my shoes off in that area…
I agree with you
Yes sir can’t wait to get mine mainly for fishing
Good luck!
You could have spent the extra fifty bucks for the electric pump. Everybody who owns one of these and never bought the electric pump always ends up buying one sooner or later.
You always getting new toys my man...👍🏾
You always getting new toys my man...👍🏾