Transforming My G56 3rd Gen Cummins With a Carli Suspension Dominator System and 37s!

แชร์
ฝัง
  • เผยแพร่เมื่อ 5 ต.ค. 2024
  • The build on my 2006 Ram 3500 Cummins G56 truck just got serious! In this video I take the truck to ‪@CJCOffRoad‬ to have a Carli Suspension 3” Dominator system installed with 37” ‪@NittoChannel‬ Ridge Grappler tires! To say this system made the truck feel like new would be an understatement… It’s absolutely mind blowing what quality suspension like this can do for a truck, and I couldn’t wait to share how much better the truck looks now! Excited for this next phase of building my absolute dream truck!
    0:19 Intro
    2:13 Carli Suspension King 3.0 Dominator Shocks
    3:53 Carli Suspension Dominator System Overview
    4:53 Carli Front Coil Overview
    5:30 Carli Shock Tower Overview
    5:56 Carli High Clearance Control Arm Overview
    6:44 Carli Track Bar Overview
    7:53 Carli Torsion Sway Bar Overview
    8:39 Carli Limit Strap Overview
    9:10 Carli Leaf Spring Overview
    10:07 Trail Ready 20” Wheel Install
    10:22 Nitto Ridge Grappler Tire Install
    11:44 Finished Truck Reveal
    #carlisuspension #cummins #3rdgencummins

ความคิดเห็น • 112

  • @JustDiesels
    @JustDiesels  2 ปีที่แล้ว +6

    For cool shirts, sweatshirts, and more check out the Just Diesels merch store: just-diesels.com
    The Parts:
    Carli Suspension Dominator system
    www.cjcoffroad.com/collections/03-09-carli-systems/products/carli-dodge-1994-2012-pintop-2-5-3-lift-suspension-system
    Carli torsion sway bar
    Carli track bar
    Carli high clearance control arms
    Carli full replacement rear leaf pack
    Steering Setup Video:
    th-cam.com/video/mio4dIS_Qqw/w-d-xo.html
    Trail Ready 20x9 Wheels (5.5” BS)
    www.cjcoffroad.com/collections/trail-ready-wheels/products/cjc-edition-ram-trail-ready-20-x-9-5-simulated-beadlock-wheel
    Nitto 37/13.5/20 Ridge Grappler Tires

  • @jmo2640
    @jmo2640 2 ปีที่แล้ว +23

    This truck literally makes me sick hahaha….In a good way, absolutely unreal!!!!

    • @Urmom012
      @Urmom012 ปีที่แล้ว

      Agreed

  • @sebastiansmith2969
    @sebastiansmith2969 2 ปีที่แล้ว +4

    Love Andrews videos! He’s knowledgeable, pleasant to listen to and definitely has my kind of taste in diesels 😏!!

  • @Danbobone982
    @Danbobone982 ปีที่แล้ว +1

    Beautiful have a 3rd gen right now thinking of buying another after this! I have 6” fabtec long arm up front/ progressive springs front and back dirt logic 2.5” reservoirs (relocated outside coil) on front tranny rebuild (48re) with goerend parts. Stock motor kept cat muffler delete 6” tip rear exit stock wheels on 35’s. I’ve had this truck for 9 years and have been very happy with it!!!! Awesome video

  • @ethanwolgamott1557
    @ethanwolgamott1557 2 ปีที่แล้ว +5

    Truck looks sick! Your builds have always inspired my own! Curious how the truck drives with 37s being a manual. I plan to do a similar setup on my 5.9 with a 5 speed and 3.73 gears. It’ll be my first time running 37s with a manual truck.

  • @calevel
    @calevel 2 ปีที่แล้ว

    Hands down Carli suspension is the top dog in the aftermarket industry for our trucks. 👍😎

  • @gunfreak565
    @gunfreak565 2 ปีที่แล้ว

    I recently switched from the Nitto Ridge Grappler to the new Toyo Open Country AT3. Best decision I ever made. I’ll never buy another set of Ridge Grapplers. Sharp build man!

    • @jamesvaldez4093
      @jamesvaldez4093 2 ปีที่แล้ว

      What's wrong with ridge grapplers?

  • @notlocw
    @notlocw 2 ปีที่แล้ว +1

    Absolutely amazing!!! I’m putting this kit on my 3rd gen

  • @KleanShots
    @KleanShots 2 ปีที่แล้ว +1

    Amazing 3rd gen

  • @jeffreyyeater1780
    @jeffreyyeater1780 2 ปีที่แล้ว

    Looks absolutely beautiful. All the right stuff ! Finished my 06 . All thuren. Needs alinement then its done . Different truck all together .

  • @SkullFarms
    @SkullFarms 2 ปีที่แล้ว

    These videos are so cool, I wish they were how to, step by step installation videos.

  • @wahlm3030
    @wahlm3030 ปีที่แล้ว

    Currently have a 6.0 dually really want a 6.7 power stroke but I do love a manual trans so the 5.9 is looking tasty right now.

  • @PokyPops
    @PokyPops 2 ปีที่แล้ว +1

    Looks so good Andrew! Absolute beauty!

  • @Daniel-1-1-1
    @Daniel-1-1-1 2 ปีที่แล้ว +1

    Hell yeah i got my dominator from cole…he is awesome and so is Dan from Carli.

  • @es.photography
    @es.photography 2 ปีที่แล้ว

    6" unchained shop truck is 💯 My muse!!!!
    Next on the to do list...dominator or unchained? I appreciate the content.
    Great job Andrew

  • @Daniel-1-1-1
    @Daniel-1-1-1 2 ปีที่แล้ว +2

    Maybe match the stabilizer shocks too? Truck is so nice 🔥

  • @ty6896
    @ty6896 2 ปีที่แล้ว

    So awesome Andrew! Very nice touches. Love the cerakote shocks!!🎉

  • @lassila3
    @lassila3 2 ปีที่แล้ว +1

    Such a brilliant channel!!🇺🇸🇺🇸🇺🇸🇺🇸

  • @djntqd
    @djntqd 2 ปีที่แล้ว +1

    Truck looks amazing! But this truck stock was so mint, I like it better original. Just my opinion. Still looks great.

    • @JustDiesels
      @JustDiesels  2 ปีที่แล้ว +1

      I totally get what you’re saying. There’s just something about a mint, stock truck! Thankfully I can always go back!

    • @djntqd
      @djntqd 2 ปีที่แล้ว

      @@JustDiesels Absolutely. But your new setup on it looks amazing. So clean. I typically don't like aftermarket wheels, but yours are a perfect fit for that truck. My 99 7.3 just don't look right without the stock wheels lol

  • @JDR1971
    @JDR1971 2 ปีที่แล้ว +1

    Mine is a 2006 diesel Big Horn Edition that I bought brand new. It's still pretty much stock aside from the Carli tuned Fox shocks and a Spyntec locking hub conversion. It's got about 120,000 miles now so a freshening of the front end might be worth it. It's driven 99% on road for towing, hauling, and just daily chores.
    Looking at the Carli track bar and sway bar, good fit for a stock height truck?

  • @mattt3475
    @mattt3475 2 ปีที่แล้ว

    Very nice Andrew, that build is turning out super and awesome job with the video as always!

  • @philmertz243
    @philmertz243 2 ปีที่แล้ว

    To not have any chrome/polished on that truck, it is PERFECT!

  • @Thatguy8134
    @Thatguy8134 2 ปีที่แล้ว

    So when I win the lottery I’m gonna buy this truck from you😂 Fantastic as always

  • @mikestrucks
    @mikestrucks 2 ปีที่แล้ว

    Well done Andrew! I absolutely love this truck ! and as usual Hollywood movie quality video....😬🙌🏻

  • @jdirt1982
    @jdirt1982 2 ปีที่แล้ว

    That is a beautiful shaft.....

  • @joeys3580
    @joeys3580 2 ปีที่แล้ว +1

    Will you do the Cab Over America lights again? I’m debating getting those now

  • @usmcfrommt9790
    @usmcfrommt9790 2 ปีที่แล้ว

    Love your channel brother. My 3rd gen is a work truck but very similar to yours. I concord the death wobble with some help from you and other TH-camrs. We’re headed to LA in a month on business. Probably not kosher, but I’d love to check out your trucks etc. No worries if I need to pound sand, but never hurts to ask…..

  • @MrPinkyRingy
    @MrPinkyRingy 2 ปีที่แล้ว

    I’m honestly just going to copy your truck. Its perfect!

  • @BrandonBigB956
    @BrandonBigB956 2 ปีที่แล้ว

    I run limit straps on the rear of my Ram to keep from my air ride getting destroyed while i have the truck on the 2 post lift doing oil changes and other maintenance

  • @OvensGarage
    @OvensGarage 2 ปีที่แล้ว

    Nice work Andrew, looks awesome! 👏

  • @mygasolineprojects9931
    @mygasolineprojects9931 ปีที่แล้ว

    Awesome truck !
    I like the rims.
    Are those Anzo headlights ?

  • @lyndonhamby7432
    @lyndonhamby7432 2 ปีที่แล้ว

    Wicked. Love it brother 💪🏻👍👍

  • @Dragon-bl3gi
    @Dragon-bl3gi ปีที่แล้ว

    Awesome video

  • @DPats1228
    @DPats1228 2 ปีที่แล้ว

    You and JayFlatOut should do a video. He’s always at CJC

  • @ernestopedraza3507
    @ernestopedraza3507 2 ปีที่แล้ว

    Bro your videos are killer👌🏼

  • @JamieMac203
    @JamieMac203 2 ปีที่แล้ว

    How is that truck so clean. Here in Connecticut you can stick ur hand thru the rocker panel and be inside the cab lol

  • @accuracyinternational7967
    @accuracyinternational7967 11 หลายเดือนก่อน

    Andrew, you mentioned in this video a "new 18 inch wheel coming out" that was delayed. Can you say what the wheel specs are and the manufacturer?

  • @h.h.legacydiesel6724
    @h.h.legacydiesel6724 2 ปีที่แล้ว

    Great vidio as always Andrew, was it a tough call cutting for the 37" 's ? 🤔
    I look forward to your engine upgrades, 550 - H.P. is that a goal? Or is it the outcome of what you already did? 🤔
    What is your ultimate goal for this project? 🤔 will there be more upgrades to be able to do?? 🤫 off road recovery? Camping? A new rooftop tent? It's so versatile now, but maybe you have a more extreme goal? The truck is so nice! Will you be a little bit afraid to push it ? Like on the tight trails?
    It's just l am looking for a great truck, maybe even to build one? But my focus is fuzzy, l have an excellent diesel camping truck, articulate, could use some suspension upgrades, but that's it, it's perfect for me, but to do more, l would wreck the great truck l have! Do you get it? Just bable! Excuse me, Your truck is awesome! Enjoy it. Thanks again for sharing.
    ✌🏻🙋‍♂️🌧🇨🇦👨‍🦽😎.

  • @TroubadourJuggernaut
    @TroubadourJuggernaut 2 ปีที่แล้ว

    Remarkable work. !!

  • @theclinchdrive
    @theclinchdrive ปีที่แล้ว

    Hey mate awesome 3rd gen you have 🤟🏻 where abouts could I find a GVM upgrade for the 2006 3rd gen Cummins? I’m looking to increase the payload by a Tonne if that’s possible…. I know the 4th gens you can go upto 5.2T + here in Australia.

  • @wannabeangler
    @wannabeangler 2 ปีที่แล้ว

    Nice looking truck! Looks exactly like mine, except for ALL of your upgrades. I did put on some B5100 Bilstein's for the ride improvement along with other minor upgrades. I like the headlights and I think they would nice on my truck. Where did you get them?

  • @ericl5973
    @ericl5973 2 ปีที่แล้ว

    Very nice setup. I am tempted to get some Carli shocks but I am not sure how well the tuning will match my custom air springs. Also want to move to a similar 20" wheel and tire setup as my 37" tires on stock wheels are the not most responsive on the road.

    • @JustDiesels
      @JustDiesels  2 ปีที่แล้ว

      Sadly air is hard since the spring rate is both variable depending on pressure, and extremely different than a coil shock! There’s really no shock tuned for air suspension though unless it’s one of the Carli 14+ factory air setups, so your best bet is to use an existing shock and then re-tune as needed.

  • @ralfhiller9043
    @ralfhiller9043 2 ปีที่แล้ว

    are you regraring it? with the torque multiplication of the torque converter on an auto, might not be a problem, but with the manual I think it is more crucial. G56, 37s, I would say 4.10 or 4.30 gears would be perfect. love the truck, looks incredible!!

    • @Fei8lo
      @Fei8lo 2 ปีที่แล้ว +2

      With a G56, there is no need to re-gear the truck. It has a crawler gear (6.29:1 or 5.94:1 depending on generation) and the over drive ratio is horrible for the highway. I intentionally put 37" to give an effective 3.40 gear on my G56 to improve highway mileage and drop engine RPM. It still tows just fine under 15k pounds and you can keep it in direct drive (5th) with reasonable speed and RPM.

    • @JustDiesels
      @JustDiesels  2 ปีที่แล้ว +1

      Yeah I might actually re-gear to a 3.55 since even with 37s the truck still does 1900 rpm at 70! I do a lot of long road trips so I’d live to bring that down a few hundred RPM!

    • @liltyler209
      @liltyler209 ปีที่แล้ว

      @Just Diesels what rpm do you recommend at 70mph? I've got an auto w/3.73 gears and w/33s I'm at 70mph at 1850rpm

  • @Daniel-1-1-1
    @Daniel-1-1-1 2 ปีที่แล้ว

    That gold!!!

  • @forgetfuljones
    @forgetfuljones ปีที่แล้ว

    Andrew!! Where on earth do you find these clean third gens? Over the years, I've gone to Texas... I've gone to Utah... just to find these very specific G56 5.9's rigs in a clean condition, but I've yet to come across anything with a frame/body half that clean. The Texas Truck had a clean frame but had absolutely destroyed paint & body. The Frame on the desert Utah truck look good on camera & despite suggesting it hadn't been, had just been freshly spray bombed to hide surface rust. Which is now flaking & heavily scaled just 6 years later.
    Is it just a matter of me not being willing to search over the 25k mark? Or should I have been specifically searching for 1 owner SoCal trucks under 100k?

  • @zacedward1
    @zacedward1 2 ปีที่แล้ว

    Thanks for the videos

  • @CrinosAD
    @CrinosAD 2 ปีที่แล้ว

    Looks so awesome. Want it on my 3gen, but... Not sure if I can priority the cost. (shipping, tax and toll to Norway is horrendous) .

    • @JustDiesels
      @JustDiesels  2 ปีที่แล้ว +1

      Yeah getting these trucks over there is NOT a simple feat!

  • @unknown_truckers
    @unknown_truckers ปีที่แล้ว

    Have you had any issues with the banks ram air diff cover going off road?
    Im looking into a 2.5 pintop set up and i wanna make sure it clears most surfaces. Mostly when Rock crawling n such

  • @ryanwhart
    @ryanwhart 2 ปีที่แล้ว

    I love your videos, they motivate me. I did watch your free spin hub review video. I'm just curious how those unit bearings are gonna hold up in this new truck, because it's got the same size wheels as your previous truck. I have a 2004 3500 Dually myself. I just purchased Carli ball joints and track bar, Mopar T-style steering and 08.5 pitman arm, Spyntec Free Spin Hubs (haven't ordered yet... still on the fence). My next purchase will be the Carli Backcountry Shocks paired with the Full Progressive Leaf Pack. Seeing how great your SRW truck looks, makes me want to do a DRW to SRW conversion. Have you done a conversion like that before... or have any advice for me?

    • @Fei8lo
      @Fei8lo 2 ปีที่แล้ว

      I have the Yukon free spin kit and it help free up 1-2 MPG. Steering feels lighter. Spyntec is a good option. Yukon is more universal in their design and they don't clearance properly for the ABS sensors on my 2006 truck. Unit bearings were holding up fine with 37" in my case, but mostly on road highway miles.

  • @adamwalczak2600
    @adamwalczak2600 ปีที่แล้ว

    Awesome vid!

  • @dodgedude908
    @dodgedude908 2 ปีที่แล้ว

    Is the link for that steering stabilizer kit in a pinned comment in your last video on this truck or would you mind posting it in another comment please?
    Nice truck after all that work!!

    • @JustDiesels
      @JustDiesels  2 ปีที่แล้ว +1

      Yeah! That video has all the details and links in a pinned comment!

  • @leemckee1272
    @leemckee1272 2 ปีที่แล้ว +1

    With the tire size increase to 37s, what rpm’s does it turn at 70? Do you now have to start off in 1st gear?
    I have 34’s and turn 2050 rpm’s at 70 and almost never start in 1st except when towing.

    • @JustDiesels
      @JustDiesels  2 ปีที่แล้ว +3

      I can still start in 2nd without issue! Now that it’s on 37s the truck pulls about 1900 at 70 instead of 2400 with the stock tires. The G56 gearing is not fun at highway speeds unless you do larger tires like this. With 37s it’s actually possible to keep up with traffic!

  • @just10420
    @just10420 2 ปีที่แล้ว

    My truck needs the carli treatment soo bad 🙈

  • @garrettfriend4772
    @garrettfriend4772 ปีที่แล้ว

    I like it better stock the way it was before......!

  • @BelligerentNeckbeard
    @BelligerentNeckbeard 2 ปีที่แล้ว

    Any recommendations for comfortable seats? I have this exact truck in blue, long bed. SLT Long Horn. Getting my suspension gussied up next week!

  • @brianp5579
    @brianp5579 2 ปีที่แล้ว

    You should get the lower trim piece for front bumper before it becomes discontinued.

    • @JustDiesels
      @JustDiesels  2 ปีที่แล้ว

      I’ve had it on order with Mopar for about 5 months now… patiently waiting!

    • @brianp5579
      @brianp5579 2 ปีที่แล้ว

      @@JustDiesels I bought a new one from mopar last year...feeling blessed

  • @RealBearFace
    @RealBearFace 2 ปีที่แล้ว

    Sick truck man! I know this is a different subject but did you already do a "what to look for in a tdi VW" ?
    I'm looking into a VW tdi wagon stick but I don't know much about them or what to look out for. Any advice?

    • @JustDiesels
      @JustDiesels  2 ปีที่แล้ว

      I’ll make a video about that in the next few weeks!

  • @curtismcintyre9284
    @curtismcintyre9284 2 ปีที่แล้ว

    Amazing!!!

  • @flsupraguy
    @flsupraguy ปีที่แล้ว

    I havent seen any new videos in a while. Do you still have this truck?

    • @JustDiesels
      @JustDiesels  ปีที่แล้ว

      Yep! Back to regular uploads now so you’ll see more of it! I also post it on my instagram regularly.

  • @Fei8lo
    @Fei8lo 2 ปีที่แล้ว

    I am interested to see how Andrew will be making 550 horse in California without swapping hard parts. That is at the upper limits of a stock turbo.

    • @JustDiesels
      @JustDiesels  2 ปีที่แล้ว

      The plan is to see if I can get away with the stock turbo. From what I understand, I should be able to to get very close. If needed I can always do a stealthy turbo upgrade.

  • @2L8CO
    @2L8CO ปีที่แล้ว

    Andrew! been 11 months! How does your new suspension feel in comparison to stock??? Do tell!

    • @JustDiesels
      @JustDiesels  ปีที่แล้ว +1

      It’s so nice. Literally feels like a new truck in comparison, and the increase in capability is wild. Had this setup on my last truck and would do it again in a heartbeat.

    • @2L8CO
      @2L8CO ปีที่แล้ว

      @@JustDiesels Just what I wanted to hear!! Have an 03 3500 w/130k and only missing the Kings and rear leafs to complete the pkg. Thanks so much for your honest comparison's 👍

  • @MoneyMasterii
    @MoneyMasterii 2 ปีที่แล้ว

    Where do
    You go
    To regear your truck because I have a 2007 Dodge Ram 1500 hemi with 35x12.50 do I need to regear??

  • @tylershenenberger8112
    @tylershenenberger8112 2 ปีที่แล้ว

    I wish I had money to get a 6 speed 3rd gen

  • @ivantheseal8936
    @ivantheseal8936 ปีที่แล้ว

    What kinda wheels are those? I didn't catch what he said and I really like them

    • @JustDiesels
      @JustDiesels  ปีที่แล้ว +1

      They’re CJC spec 20x9.5 Trail Ready wheels 👍

    • @ivantheseal8936
      @ivantheseal8936 ปีที่แล้ว

      @@JustDiesels thank you kind sir!

  • @dontask7898
    @dontask7898 2 ปีที่แล้ว

    So then why not have kept the first one that looks exactly like this one and just make the small changes to that one?

    • @JustDiesels
      @JustDiesels  2 ปีที่แล้ว

      Because this one has 40k miles and a 6 speed manual!

  • @McRaesadventures
    @McRaesadventures 2 ปีที่แล้ว

    Now all it needs is 600hp!

  • @savagewolf7794
    @savagewolf7794 9 หลายเดือนก่อน

    What color gray is the truck

  • @bigcsd9
    @bigcsd9 2 ปีที่แล้ว

    Which Head unit radio do you have?

  • @repo4sale
    @repo4sale 2 ปีที่แล้ว

    27-33mpgs Jewish Ram 2500 Cummins diesel deleted g56 2015 4x4 in 4door camper shell, 1st responder rigged. 10,500 lbs.

  • @jebm95
    @jebm95 2 ปีที่แล้ว

    What made you not go with the 6 inch lift

    • @JustDiesels
      @JustDiesels  2 ปีที่แล้ว

      Ultimately it came down to bed access and cab access. I’m constantly loading bikes, snowboards, etc, so it’s just easier with a 3” system!

  • @wrathcustoms9566
    @wrathcustoms9566 2 ปีที่แล้ว

    I wanna transform my 3rd gen. But I'm broke lol.

  • @ty6896
    @ty6896 2 ปีที่แล้ว

    You gonna change the grille?

    • @JustDiesels
      @JustDiesels  2 ปีที่แล้ว +1

      I did! It had a chrome one and I switched to this color matched OEM one!

  • @kagunnhardy9889
    @kagunnhardy9889 2 ปีที่แล้ว

    I keep hoping you'll get ahold of a 83-86 Bullnose ford with an IDI and do a build on that. love your channel though!

    • @JustDiesels
      @JustDiesels  2 ปีที่แล้ว +1

      Maybe one day! Wish all these trucks weren’t so damn expensive right now!

    • @kagunnhardy9889
      @kagunnhardy9889 2 ปีที่แล้ว

      @@JustDiesels
      Oh trust me, I've parted out a few of them and just got a Gem of a 85 F350! she's getting the works right now, but parts availability will kill you, but R&D does some fun stuff for those old IDIs.

  • @5t5ck25
    @5t5ck25 2 ปีที่แล้ว

    What wheels are those??

    • @JustDiesels
      @JustDiesels  2 ปีที่แล้ว

      Here's a link: www.cjcoffroad.com/collections/cjc-exclusive-wheels/products/cjc-edition-ram-trail-ready-20-x-9-5-simulated-beadlock-wheel

  • @The_MM_Life
    @The_MM_Life 2 ปีที่แล้ว +1

    First! Great videos!

  • @turtletube
    @turtletube 2 ปีที่แล้ว +3

    Are you loaded

    • @JustDiesels
      @JustDiesels  2 ปีที่แล้ว +1

      Nope, just very thankful to have brands work with me, along with having a good job and some extra income from TH-cam!

    • @turtletube
      @turtletube 2 ปีที่แล้ว

      @@JustDiesels nice 👍🏻

  • @Wolfgang2018
    @Wolfgang2018 หลายเดือนก่อน

    Anyone got a good site for ball joints?

    • @JustDiesels
      @JustDiesels  หลายเดือนก่อน

      Hit up CJC Off Road: www.cjcoffroad.com/collections/dodge-ram-2500-3500-ball-joints

  • @cameronharrison2108
    @cameronharrison2108 2 ปีที่แล้ว

    My truck has fox shocks and it still rides like shit

  • @Pickledlizardnipples
    @Pickledlizardnipples ปีที่แล้ว

    Best ride on a third gen is bags on all 4 corners

    • @JustDiesels
      @JustDiesels  ปีที่แล้ว

      Only if you never want to leave the pavement! Show me a truck on bags doing stuff like this and then we’ll talk: th-cam.com/video/_OwRs86GLlQ/w-d-xo.html