Your videos are the BEST I have come across in thoroughly explaining the individual I-O capabilities along w/ their relationship to the TotalMix software. Thank you ever so much!!! FREE
OMG! I think you are about to save my life. I have been sifting through videos including those recommended at the RME site and have been unable to make head or tail of Totalmix. Yours is the only one that is so clear and to the point. Thank you. I will keep watching.
This is the authoritative and official TotalMix walkthrough. Thank you. Barry John's is cool and all but he overcomplicates the mental model by telling people to think top down. I corrected it by saying what was done here by understanding that the bottom row on click/select shows what is going on above. Think bottom up to keep your sanity.
As a newbe homerecording amateur I dare say: Great video! Now I know that my quest of trial and error was not in vain! I wish I found this video weeks ago it would have saved me a ton of time and annoyance. The right topics were hit the right way, well done!!
Man oh man. THIS is a life-saver tech tutorial if there ever was one. I'm still lost, but at least I see the light (viewing this away from my studio atm). Oh, and .. MAN the fun we could have remixing those classic Doobie multitracks! Like a kid in Disneyland .. thanks for this!!
OMG! I had no idea I bought such a powerhouse. I will need to spend some time with this device. Shame I bought mine just before the MADI one came out, but hey ho, when I'm recording 100 channels at once, I'll think about upgrading, for now, it works. Thanks for the great video.
This was super handy to show me how I could have something like Guitar Rig 6 open alongside my DAW and to have my DAW record a direct guitar track alongside the effected amp track...good stuff
@@SynthaxInc immensely! Would you also know what the eight little blocks (that illuminate green) on the bottom left of a UFX II lcd display are? I can't find the info anywhere
Super halpful; good explanations. I'm going to need to rewatch stuff towards the end a second time to make sure I get it, but I already know so much more now than I did before I watched this. Thanks you for this! Well done.
Quick question, I'm using a Neve 1073spx l to mix as plugin in my DAW. On the back on the Neve I have a compressor inserted. Do I need to enable +4 on on the in and out channel where it's connected in total mix fx?
This is amazing! i had no idea. finally understand how to use it. I would really love if someone showed me how to use foldback and route into logic. Its jut not working for me
You seem very knowledgeable with this software, thanks for all the info. The problem I'm having is this: I'm trying to slap a hardware compressor across my mixbus. I have it all set up hardware wise right (7-8 out of the Fireface into the comp back out the comp into 7-8 of the Fireface.) Great. The problem is when I pull up 7-8 on Totalmix im getting phasey feedback. Ive tried everything I can think of. Please tell me you can help. FRUSTRATED!
hey, thank you sooo much (again) for that overall walkthrough. I would like to ask something: when I switch in the view options "submix" to "free" mode then have some input-channels being labeled at the bottom "n.a." witch meens "not availible". in that state I can't make any routing to that channel. why is that or what have I done wrong in the settings??? when I switch back to "submix" mode, all channels are labeled as normal again. I realy love my Babyface Pro fs-it brought so much value into my workflow. bests
really wish total mix had a Auxiliary IO mapping options . so that you could just use your out board Effects units . Some sort of add Aux button and select Send & return IO . This way with a couple of ADAT you could record a live performance with effects .
Hi am having a Problem with my new rme babyface pro fs . the microphone input is so low that you could bearly hear it. I use a condenser mic and the 48v is always on and My settings are correct but dunno if am missing something. Could you have any ideal on what I could do? Am using a terra note book core i7 12gb it's a pretty powerful computer
This is the best tutorial I've seen, thank you but - did I miss something? - you said how to record EQ settings but how do you record the actual Reverb and delay effects of the Babyface please?
Not recommended Reverb and Delay are best used for monitoring only and then added after recording within the DAW....Anyway, I expect you can do that through loopback as shown in the video.
I’m have a Babyface Pro and a UFX+ using thunderbolt. Can the babyface pro stay connected via USB and selected for playback ...and the UFX+ for recording?
PHONE 1 is the mix you hear in your physical headphones, while MAIN is the mix you hear in the physical monitors connected to the interface, correct? What do you use to mix what other people hear while you're streaming or recording?
hello please I have an RME FIREFACE UC sound card can I have a tutorial? I have logic pro x software. how to understand the total mix? how can I do my setup? can I make an exchange and have and have a more recent RME? I live in Libreville in Gabon if I can have a video with translation into French or into French directly. THANKS
absolutely beautiful explanation. I have some questions: is it possible to integrate whit a radio broadcasting sw app ? the problem is how to route back into the broadcasting software the separate signal for music and mic since the decoding is done inside the broadcasting sw? Another question: can the mic be routed out to a plugin and then get back? Probably in the software input it will get back after I saw your video.
Thinking about buying a Babyface and wondering when would one actually need dynamics to be available in TotalMix instead for recording dry and adding that in the DAW later where it can be adjusted any time - instead of recording a wet signal!?
Because the effects are internal DSP from the Babyface it reduces the cpu load in your DAW, that’s the main benefit. So would be primarily for those dealing with major cpu load issues
So Phones 1 is the mix you're creating for yourself to hear and Main is the mix you're creating for people to hear if you're streaming OR will everything routed to PB 1/2 be listened to by viewers regardless of whether it's Phones 1 or Main mix?
nice to learn old known stuff with a fresh angle.. :D watching my soundcards producer instruction Viedo for fun.. jeah you can tell i have free time! :D
It would have been nice if the screen would have been maximized so that we'd have a better ability of reading labels since many of us are doing market research & merely attempting to understand what on earth is going on with your audio routing (some of us are also just learning the basics of audio routing)... words and labels matter as teaching tools for context.
Hi hope you're doing fine 👍👍 I have a question that's, For many years i didn't use my rme interface ( baby face ) But just i connected to do a mix by use of Rme total mix fx but i couldn't get the exact output means ( i don't know how to get output of RME total mix FX in mixing and mastering, if it's possible plz help me. ( Hope you may help me and also many RME users are unable to use RME Total mix FX in logic Pro ) It's easy to get output but it doesn't sound same after getting final out and playing in any-other players like in a car or another studio etc etc. ( And also don't know to use the loopback option in RME Total Mix FX ) please help me 🙏😁
Would you please tell why do I get phase like sound into my headphones after turning on the software monitoring because I want to record with plugins so what should I do? Is it due to the software monitoring of logic or Total mix?
Hello, the phasing sound comes from both TotalMix and DAW monitoring active at the same time. Since you want to monitor with plugins you should use the DAW monitoring only, and remove the input routings from TotalMix FX.
why cant i record or listen guitar that i am playing live from my daw LOGIC but able to listen directly from the total mix note: i have properly installed drivers and everything else works properly except this that i am not able to see any input in my daw when i connect my electric guitar to my interface
YOU declare that you have "two" interfaces connected (and it's "totally fine). But you're in Mac. That's not new.... ...Will that work in Windows (that's the REAL question)?!
![[LIVE] : ONE ลุมพินี 88 | คู่เอก "ป้อมเพชร vs อัสลามจอน"](http://i.ytimg.com/vi/1ZqTVVbMgbo/mqdefault.jpg)
Your videos are the BEST I have come across in thoroughly explaining the individual I-O capabilities along w/ their relationship to the TotalMix software. Thank you ever so much!!! FREE
Five minutes in and I've already learned a lot more than from any other video on the topic. Thank you!
Finally somebody who explains it so I can understand. Been RME User for 20 Years. Thank you!
lol
Damn 20 yrs and you still didn’t understand how to use it? Holy ish man lol
@@Gang-25j but he is an Amazing Guitar coach ;)
I've been using Totalmix / Totalmix FX for 20 years and still learned stuff in this video.
Exellent!
OMG! I think you are about to save my life. I have been sifting through videos including those recommended at the RME site and have been unable to make head or tail of Totalmix. Yours is the only one that is so clear and to the point. Thank you. I will keep watching.
This is the authoritative and official TotalMix walkthrough. Thank you.
Barry John's is cool and all but he overcomplicates the mental model by telling people to think top down.
I corrected it by saying what was done here by understanding that the bottom row on click/select shows what is going on above.
Think bottom up to keep your sanity.
RME user since 15 years. First time I understand what’s going on)) Thank you so much!❤
Best tutorial of TotalMix on the internet by far. Thank you so much!
As a newbe homerecording amateur I dare say: Great video! Now I know that my quest of trial and error was not in vain! I wish I found this video weeks ago it would have saved me a ton of time and annoyance. The right topics were hit the right way, well done!!
Man oh man. THIS is a life-saver tech tutorial if there ever was one. I'm still lost, but at least I see the light (viewing this away from my studio atm). Oh, and .. MAN the fun we could have remixing those classic Doobie multitracks! Like a kid in Disneyland .. thanks for this!!
They ain't related but they do be brothers!
Great tutorial video, thanks a lot for taking the time to create this content.
Outstanding training video! This saved me countless hours of trial and error with my face buried in the manual. Thank you!!
The effects overview starts at 35‘30‘‘. But boy are the first 35 minutes useful!
This is the best, practical overview of TotalMix I have seen so far.
Incredible. You are a great German translator..
Love your videos!!! Helped me figure out totalmix for a Fireface interface I just bought. Thank you!!!
Excellent video and “a long time coming”. So much clearer to watch this than the manual...for me!
I finally understand my Totalmix ! Thanks for an excellent video
OMG! I had no idea I bought such a powerhouse. I will need to spend some time with this device. Shame I bought mine just before the MADI one came out, but hey ho, when I'm recording 100 channels at once, I'll think about upgrading, for now, it works.
Thanks for the great video.
This was super handy to show me how I could have something like Guitar Rig 6 open alongside my DAW and to have my DAW record a direct guitar track alongside the effected amp track...good stuff
You know you can just add another track in your DAW, and record from same input and not apply any effect nor monitor it.
Can the UI be resized to fit any monitor size or people's eyesight differences?
Finally.... incredibly detailed and informative. Thank you!
Excellent tutorial, my friend. Clean and clear. Will definitely help me further master my old FF UCX.
Thank you for this tutorial, I finally understand my interface a lot better. 🔆🔅🔆
Great video and a great demo using the Doobies!!!
So helpful. Thank you! I am no longer overwhelmed by TM FX
Glad it was helpful!
@@SynthaxInc immensely! Would you also know what the eight little blocks (that illuminate green) on the bottom left of a UFX II lcd display are? I can't find the info anywhere
@@donkeykebab That is the DSP resource meter. As you add effects in TotalMix FX (EQ, Dynamics) this shows how much DSP power is currently in use.
@@JeffPetersenSynthax Aaaah thank you so much. It's been puzzling me for a while
Super halpful; good explanations. I'm going to need to rewatch stuff towards the end a second time to make sure I get it, but I already know so much more now than I did before I watched this. Thanks you for this! Well done.
Thanks for this video. Simple and well done.
This is the one to watch right here!
Fantastic Video, great pace, and great examples. Many thanks!
Please a tutorial on TotalMix Fx Matrix view!!
Fantastic, thank you so much for taking the time to make this!
Thank you kindly for the tutorial could we please ask for time stamps. Will have to go back and re watch some parts and am struggling to find them.
Quick question, I'm using a Neve 1073spx l to mix as plugin in my DAW. On the back on the Neve I have a compressor inserted. Do I need to enable +4 on on the in and out channel where it's connected in total mix fx?
Stellar tutorial...TY !!!
Thank you, this was super helpful!
The Best Teacher!
thank you very much. it was really helpful.
Thanks for this..although I only understood the first 3-4 minutes ( because the rest was Chinese to me ), it's what I needed to set mine up correctly.
This is amazing! i had no idea. finally understand how to use it. I would really love if someone showed me how to use foldback and route into logic. Its jut not working for me
Very helpful, thank you!
Great video.
You seem very knowledgeable with this software, thanks for all the info. The problem I'm having is this: I'm trying to slap a hardware compressor across my mixbus. I have it all set up hardware wise right (7-8 out of the Fireface into the comp back out the comp into 7-8 of the Fireface.) Great. The problem is when I pull up 7-8 on Totalmix im getting phasey feedback. Ive tried everything I can think of. Please tell me you can help. FRUSTRATED!
Yes!!!! This was my setup with a Presonus interface. The RME is next on my list.
excellent video !
great Video! Thanks.
hey,
thank you sooo much (again) for that overall walkthrough.
I would like to ask something:
when I switch in the view options "submix" to "free" mode then have some input-channels being labeled at the bottom "n.a." witch meens "not availible". in that state I can't make any routing to that channel. why is that or what have I done wrong in the settings??? when I switch back to "submix" mode, all channels are labeled as normal again.
I realy love my Babyface Pro fs-it brought so much value into my workflow.
bests
All the faders (ins, outs and daw section) that are combined as stereo pairs can be unpaired as separate mono faders?
really wish total mix had a Auxiliary IO mapping options . so that you could just use your out board Effects units . Some sort of add Aux button and select Send & return IO . This way with a couple of ADAT you could record a live performance with effects .
Hi am having a Problem with my new rme babyface pro fs . the microphone input is so low that you could bearly hear it. I use a condenser mic and the 48v is always on and My settings are correct but dunno if am missing something. Could you have any ideal on what I could do? Am using a terra note book core i7 12gb it's a pretty powerful computer
Well shit. I finally learned some critical stuff I've been spending a week trying to figure out.
thank you, very helpful!
Great! I just ordered UFX II and was wonder just about everything you explained. Thank you sir. 😊✌️
Do you still have your UFX II and are you enjoying it? Mine comes later today.
@@r3production273 Hi, yes I have. Best interface. So versitile. Use it every week.
Hey there thanks for the tutorial is there a way to record the FX send in my DAW ? Like the delay or reverb from totalmix ?
This is the best tutorial I've seen, thank you but - did I miss something? - you said how to record EQ settings but how do you record the actual Reverb and delay effects of the Babyface please?
Not recommended
Reverb and Delay are best used for monitoring only and then added after recording within the DAW....Anyway, I expect you can do that through loopback as shown in the video.
Very nice - thanks man
I’m have a Babyface Pro and a UFX+ using thunderbolt. Can the babyface pro stay connected via USB and selected for playback ...and the UFX+ for recording?
Very helpful thanks!
Time stamps?
PHONE 1 is the mix you hear in your physical headphones, while MAIN is the mix you hear in the physical monitors connected to the interface, correct? What do you use to mix what other people hear while you're streaming or recording?
I haven’t tried it yet, but I feel like “unity” is gonna blow my speakers so I never have it at unity... worries me as far as mixing goes. Any tips?
hello please I have an RME FIREFACE UC sound card can I have a tutorial? I have logic pro x software. how to understand the total mix? how can I do my setup? can I make an exchange and have and have a more recent RME? I live in Libreville in Gabon if I can have a video with translation into French or into French directly. THANKS
absolutely beautiful explanation. I have some questions: is it possible to integrate whit a radio broadcasting sw app ? the problem is how to route back into the broadcasting software the separate signal for music and mic since the decoding is done inside the broadcasting sw? Another question: can the mic be routed out to a plugin and then get back? Probably in the software input it will get back after I saw your video.
Thinking about buying a Babyface and wondering when would one actually need dynamics to be available in TotalMix instead for recording dry and adding that in the DAW later where it can be adjusted any time - instead of recording a wet signal!?
Because the effects are internal DSP from the Babyface it reduces the cpu load in your DAW, that’s the main benefit. So would be primarily for those dealing with major cpu load issues
So Phones 1 is the mix you're creating for yourself to hear and Main is the mix you're creating for people to hear if you're streaming OR will everything routed to PB 1/2 be listened to by viewers regardless of whether it's Phones 1 or Main mix?
Would be amazing if u could add chapters.
i like total mix
The "safety oof" sounds sinister!
This is the best tutorial, but unfortunate gets buried in search results below all sorts of confusing rubbish
why optical out no sound?
nice to learn old known stuff with a fresh angle.. :D watching my soundcards producer instruction Viedo for fun.. jeah you can tell i have free time! :D
Thank you!
Ah finally some information on total mix… oh wait…. Barely audible… a tutorial on an audio product that’s not audible.
It would have been nice if the screen would have been maximized so that we'd have a better ability of reading labels since many of us are doing market research & merely attempting to understand what on earth is going on with your audio routing (some of us are also just learning the basics of audio routing)... words and labels matter as teaching tools for context.
Can we have a direct out from each input?
Sure, output channels can have any routing you like. If you want Input 1 to send to Output 1 that is easy to configure in TotalMix FX.
Hi hope you're doing fine 👍👍
I have a question that's,
For many years i didn't use my rme interface ( baby face )
But just i connected to do a mix by use of Rme total mix fx but i couldn't get the exact output means ( i don't know how to get output of RME total mix FX in mixing and mastering, if it's possible plz help me. ( Hope you may help me and also many RME users are unable to use RME Total mix FX in logic Pro )
It's easy to get output but it doesn't sound same after getting final out and playing in any-other players like in a car or another studio etc etc.
( And also don't know to use the loopback option in RME Total Mix FX ) please help me 🙏😁
Too much to try to explain here, please contact your local RME distributor for tech support.
What’s about pro tools or logic does anyone use reaper ?
Thank you.
When I click on the channel names to change them like you do, it doesn't do anything. How are you doing that??
I figured it out. You pressed the "names" button in the blue section.
Would you please tell why do I get phase like sound into my headphones after turning on the software monitoring because I want to record with plugins so what should I do? Is it due to the software monitoring of logic or Total mix?
Hello, the phasing sound comes from both TotalMix and DAW monitoring active at the same time. Since you want to monitor with plugins you should use the DAW monitoring only, and remove the input routings from TotalMix FX.
@@JeffPetersenSynthax ohhh thanks a lot man
why cant i record or listen guitar that i am playing live from my daw LOGIC but able to listen directly from the total mix note: i have properly installed drivers and everything else works properly except this that i am not able to see any input in my daw when i connect my electric guitar to my interface
please help me with this>...
That is not an RME issue, you have to give audio access to the Logic app in your OS.
support.apple.com/en-gb/guide/mac-help/mchla1b1e1fe/mac
sweet!
GRAZIE !!!!
Stefano
4347 Michelle Point
Adjust your Microphone in put! It's way to low!
YOU declare that you have "two" interfaces connected (and it's "totally fine). But you're in Mac. That's not new....
...Will that work in Windows (that's the REAL question)?!
Yes it does.
@@electricwhiterabbit How is Windows going to handle both interfaces? It doesn't have "Core Audio"?
@@sekritskworl-sekrit_studios Via ASIO drivers.