Penn Battle II 4000 Fishing Reel - How to take apart, service and reassemble
ฝัง
- เผยแพร่เมื่อ 24 ก.ค. 2020
- Penn Battle II 4000 tutorial on breaking down, servicing and reassembling. See below for helpful equipment and supply links. If you found this video useful, please show some love by hitting the thumbs up button and consider....
Hitting the Thanks button under the video
or my PayPal tip jar:
PayPal.Me/TSGReel
Amazon links (containing "amzn.to") and eBay links (containing "ebay.us") below are affiliate links. If you purchase ANYTHING through these links, I may get paid a commission. Help fund my future endeavors by using them when you purchase.
AMAZON main page - amzn.to/46qttJS
EBAY main page - ebay.us/3BvTqi
Penn Battle II 4000 Reels For Sale on eBay:
ebay.us/34TBrs
Penn Battle II Reels For Sale on Amazon:
amzn.to/3QnkyU7
Penn Battle II Reel Combos For Sale on Amazon:
amzn.to/3QnzBNn
The mini screwdriver sets I use spin freely in the palm of my hand, which I prefer for speed.
MINI SCREWDRIVER SET (eBay)
ebay.us/QbICC9 (Spinning - Option A)
ebay.us/STpQDI (Spinning - Option B)
ebay.us/xvTFRx (Non Spinning)
MINI SCREWDRIVER SET (Amazon)
amzn.to/3r8NdBF (Spinning - Option A)
amzn.to/43ZpJ0g (Spinning - Option B)
amzn.to/437CsN8 (Non Spinning)
Paper towels I Use:
ebay.us/Hi2pWc (eBay)
amzn.to/48udknh (Amazon)
Gloves I use:
ebay.us/4CDP89 (eBay)
amzn.to/3SeAbgY (Amazon)
I, generally, use a ratcheting, interchangeable regular-sized screwdriver for the initial loosening of screws. Here's a link to the brand I use:
amzn.to/440Bwvb
Get some additional, varying sizes Flathead and Phillips bits while you're at it.
The adjustable wrenches I use (instead of hex nut wrenches) are Husky, but these (with the red insert) work very well... 6-inch will be used the most:
ebay.us/CKiSM7 (eBay)
amzn.to/3PAbkTT (Amazon)
If you prefer to use hex nut wrenches, I'd recommend angled/offset ones, like these:
amzn.to/44ljUtL
or a pass-through socket wrench set, like this:
ebay.us/ygHAQo
Reel grease I use:
ebay.us/AtmVUv (eBay)
amzn.to/46p4p66 (Amazon)
Drag grease I use (brown for warm weather, purple for cold):
ebay.us/WU7NOh
Oils I use:
ebay.us/RLtGzV (eBay)
amzn.to/3PubkVA (Amazon)
ebay.us/I3NXpx (eBay)
amzn.to/44kjdkz (Amazon)
See my community page for links to parts suppliers:
www.youtube.com/@TSGReelServi...
*******************************
Other Videos You May Like:
• Penn 330 GT2 Levelwind... (Penn 330 GT2 Tutorial)
• Shimano Baitrunner 650... (Shimano Baitrunner 6500B Repair)
• Fin-Nor Offshore 7500 ... (Fin-Nor Offshore 7500 Tutorial)
• Penn Senator 6/0 (114H... (Penn Senator 6/0 Tutorial)
• Abu Garcia Ambassadeur... (Abu Garcia Ambassadeur 5000 Tutorial)
• Daiwa BG13 Spool Metal... (Daiwa BG13 Repair & Tutorial)
• Quantum Boca BSP40PTS ... (Quantum Boca BSP40PTS Tutorial)
• Penn International II ... (Penn International II 30TW Tutorial)
• How To Service Your Sp... (How To Service Your Reel In Under 20 Mins)
• Shimano TLD 25 Fishing... (Shimano TLD 25 Tutorial)
• Penn Spinfisher 650SSM... (Penn Spinfisher 650SSM Tutorial)
• Shimano Baitrunner 800... (Shimano Baitrunner 8000D Repair & Tutorial)
• Shimano Stradic 4000FJ... (Shimano Stradic 4000FJ Tutorial)
• Penn Spinfisher 6500SS... (Penn 6500SS Repair & Tutorial)
*******************************
Ultrasonic Cleaners. 3 liter or above:
ebay.us/olT4J6 (eBay)
amzn.to/3NusJuD (Amazon)
Small parts mesh basket for ultrasonic cleaner:
ebay.us/cmvoe8 (eBay)
amzn.to/3NuycBM (Amazon)
Ultrasonic cleaner additives (use in moderation):
amzn.to/444EaQG (dish liquid)
amzn.to/43bYZIY (heavy duty cleaner)
amzn.to/440wcZ5 (alcohol)
Workshop Overhead Light:
amzn.to/44fxbo0 (Amazon)
#TSGReelService #FishingReelRepair #pennfishingreels #pennreels #pennbattle #inshorefishing #beachfishing #reeffishing #reelrepair #fishingreelmaintenance #fishinglife
@TSGReelService - กีฬา
![[ไฮไลต์] แบดมินตันชาย วิว กุลวุฒิ(ไทย) vs Kenta Nishimoto(ญี่ปุ่น) รอบ 16 คน | โอลิมปิก 2024](http://i.ytimg.com/vi/kaQRLljJkSI/mqdefault.jpg)
Appreciated the video content? Want to show some love?
Hit the Thanks button under the video
or hit up my PayPal tip jar:
PayPal.Me/TSGReel
Just used this video as a tutorial to device my Penn reels... clear instructions made it easy!!!
Thanks for watching! Glad to hear it helped. Be sure to hit the thumbs up button and spread the word about the channel.
Thanks very much! Stripped it all down and it's running much better. Slight noise but runs smoothly.
Thanks for watching! Excellent! Don't worry too much about a little noise.... happens with age and use. As long as the bearings and anti-reverse clutch looked and felt fine, you should be okay. Spread the word about the channel, more vids to come.
Awesome video! Easy to follow step by step break down and rebuild
Thanks for watching! Glad to hear you found it helpful!
Thank you! Couldn’t have repaired my reel without your help!
You're welcome! Happy to hear you found it useful. Spread the word about the channel. More vids to come.
Thanks very much for this, helped greatly with servicing my 2000 series. Cheers!
You're welcome and thanks for watching! Glad to hear it helped. More vids to come.
Great video thanks for sharing !
You're and thanks for watching. Subscribe and tell your friends about the channel.
Good
Your videos on reel maintenance are the best on youtube. I have also a Penn Fierce III Live Liner, If you could due a video on a Live Liner II or III in the future that would be great !!
Thanks for checking out the video! Glad to hear you found it useful. Definitely will if it comes in. I recorded a Slammer 760L recently, but haven't checked it out or edited it yet... will get to it as soon as I can.
wow great video
Thanks for watching! Spread the word about the channel.
Great video! Very thorough and detailed. Thanks for posting
You're welcome. Thanks for watching!
Thanks bud! 💯
You're welcome and thanks for watching! More vids to come!
Thanks for sharing watching from Saipan
You're welcome and thanks for watching all the way from Saipan! More vids to come. Spread the word about the channel.
Good video, first time I put it back together the reel was not running as smooth. I pulled apart again and used the oil on every bearing. I put it back together and it was perfect.
Thanks for watching! Glad to hear the video helped save you $$$ by servicing it yourself. Spread the word about the channel.
Hi thanks for the video, i have penn passion 4000 who look like penn battle ii 4000.. i wonder if the spool and handle can be substitute to one on another?
Hi, don't know..... never tried it.
I recently used your video to overhaul and repair my Battle II 4000. The reel had two years of heavy freshwater use, the "Pivot Arm" got worn due to heavy use and due to the fact the bail arm assembly was not greased much at the factory, it wore to the point that the "Pivot Arm" was jumping out of it's track. I replaced both the "Bail Arm" and "Pivot Arm" and it works properly again. The problem I have now is that after cleaning and greasing the reel, the reel was fairly smooth but after several hours of use in the cold Canadian winter the reel got very stiff, I assumed that I had used too much grease so I opened the reel again and removed as much excess clumps of grease as I could leaving just a good coating on all the parts. Now the reel turns even more smooth, but after leaving in the cold for several hours develops some slight stiffness. Is this due to just new fresh grease ? I use Penn reel grease just like the factory. The parts are installed correctly and the reel is nice and smooth at room temperature. I have a Battle II 5000 which has seen little use and has never been overhauled, factory grease which was also put in the cold for the same time. It does not develop any stiffness after cold exposure, Also I noticed that at room temperature the 5000 is slightly smoother (less stiff) than the 4000, is this because the gears on the 4000 are more worn after 2 years than the 5000 which is almost new ? Any suggestions would be appreciated, Thank You.
Thanks for the excellent explanation of what you're experiencing. I suspect it may be your bearings are the issue. Check out my video on bearing cleaning and try using no more than 3 drops of TSI321 per bearing. I would probably add a little more grease back to the gears to be on the safe side.
You should also check your a/r clutch to ensure it has some lubrication on the silver cylinders inside ... not too much... a few drops will work. Hope this helps. If you're still having trouble shoot me an email (tsgreelservice@gmail.com) referencing this conversation, along with your name and phone number and I'll give you a call.
hi what do u recommend doing if the pinion with the clutch sleeve is stuck when trying to take it out to grease
See this video for some help:
th-cam.com/video/rSWzUDEtMOY/w-d-xo.htmlsi=GPcZrYvtTCzMzElJ
All the best with it.
Thank you for the awesome video. Very easy to follow. I also really appreciate the time to take to answer all comments and offer help to others. In that spirit, I'd like your opinion on my Battle 2 6000. The reel has seen very little use over time and recently has become my work horse. I recently cleaned and greased it using this video. It was perfect before I started and everything inside appeared to be in perfect condition. After reassembling I noticed a slight issue. The entire handle assembly is rock solid. However if I grab the handle at its base, next to where it meets the side plate, and I push straight in or pull straight out, I feel some play. Not a wobble. No grinding, just some very slight movement straight in and out. I put the handle on the right side and it still happens on the right side. Have you every experienced this? Any suggestions on a fix? Add an additional shim? You have 4 shims on your reel. I only had one. Or might it be one or two of the bearings on either side of the main gear? Any suggestions would be GREATLY appreciated. Thanks for all you do..
Thanks for watching! If you're not having any issues with the way the gearing feels, then the reel is fine. Most reels have some handle play. If you're having a """geary" feel when you crank, play with the shims.
@@TSGReelService thanks again for taking the time to answer all these questions
No worries, bud.
amazon and walmart has this on sale now for $55 or $65, a sweet deal
Cool, thanks for sharing!
Hi dear. I have bought two Penn Battle 2 6000s but to my surprise both have sort of crack at the top end of the bail arm. Can someone please confirm do all reels come like this or are mine damaged ? Thanks.
Check out my response to your other post.
So I have a Wrath 6000 and it’s got more parts that what that reel had on the reel behind the spool. Like a triangle looking spring and a plastic arm with a spacer or something. I can’t figure out how those 3 pieces go back together. Can you offer any advice?
Thanks for watching. See my Pursuit III 6000 video for help:
th-cam.com/video/g66zuWrQ_NQ/w-d-xo.html
@@TSGReelService awesome. Thanks so much!
Question my battle 2 4000 bail is very easy to flip over and i have successfully removed the automatic bail trip but is there something i can do about the bail flipping over easy maybe buy a stronger spring or if i am wrong can you recommend me what to do
Hi Brandon, if it's a battle 2, you've probably had it a while, so replacing the spring (assuming nothing else is wrong) should help. You can also try stretching the spring (new or used) to add another millimeter or two to it. Going bail-less is also an option, by cutting the wire, but you'll need to add weight to the pivot side. Hope this helps.
@@TSGReelService it is pretty new and hasnt really caught fish on it yet just has a weak bail thats easy to trip over
I just opened up a friends 4000 Batt 2. It was making just awful noise,rumble etc.. I found the lower pinion bearing frozen,upper pinion bearing noisy. Tried soaking the bearings in mineral spirits and actually got the smaller bearing quieted down,and then some TSI321 made it silent.So even though the other bearing was noisy,I reinstalled the pinion,bearings,clutch etc,,put the screws back,,and just turning the pinion gear by hand it feels lousy,,even worse when I put the whole reel back together and cranked the handle. I am assuming it’s the bearing making it feel and sound so nasty. Do you think it could be anything else besides the bearing,or bearings? Could the clutch be making that noise and rumble? I wouldn’t think it’s that,being the anti reverse is working..any thoughts?
Thanks for watching. Assuming you reinstalled everything correctly, based on everything you said, it sounds like the bearings. You should also check the a/r.... all 3 may need replacing. You can change one thing at a time (e.g. - worse of the two bearings and so on) to help identify the culprit(s).
@@TSGReelService How can it be the A/R? In my experience,I only know of faulty A/Rs allowing the reel to turn backward. How would it produce that noise? Don’t the bearings in the clutch stay still when being cranked? I am confused. Is there a way to check the A/R without replacing it?
What is your view on greasing Carbon Fiber drag washers. Most people seem to have the view that they should be greased as it will keep them flexible and less likely to get brittle and break, therefore they will last longer. Also I have read that greasing will lower the initial friction or force required to start the drag moving and therefore improve drag performance. Also greasing will prevent or impede corrosion, important in saltwater. I have noticed that not all manufacture's do this and some recommend this but their reels often come from the factory with little or no grease. Most likely Quality Control issue at the factory.
Hey John! I think most of the points you make are valid,.... it all boils down to whether or not you want smoother startup (and range) or greater top end drag. Personally, I prefer greasing my CF's, since I rarely ever have to max out the drag.
I usually get spinning reels that look like they were drug in the sand left in the ocean, service is a nightmare when it comes in my shop. I tell customers that I will charge by the hour for cleanup and then charge for servicing. I am getting tired of cleaning up someone's neglected equipment. How do you feel about that situation?
Altough it may be frustrating, and even sad, sometimes, without those customers, repair shops would be non-existent. I try to remind myself of that when I slip down that path. Charging by the hour is tricky because they have to trust that it took as long as you say it did to clean. You may want to consider charging a flat rate for those circumstances. They'll understand... it's not like they don't know their reels are in bad shape. After all, they brought it to you. 🙂
I can only record and post about 5 to 10% of the reels I get in, due to time constraints and deliverables... since many of the reels I get are similar to what you experience. It's all part for the course.
That's business for you! If it bothers you, don't do it. Hand it back and say no thanks. Money will easily walk out the door.
At 5:52, i can't get to separate the upper and lower part. Its stuck.
I'm using a penn battle 3000. Can you help please.
Turn the reel upside down and use a rubber mallet to gently tap around all sides of the bottom of the rotor until it frees up. The opening in your rotor has fused around the pinion gear.
What do you use to clean all the parts?
Thanks for checking out the video. See the complete video and the description for info. Spread the word about the channel.
Hi, I wanted to please ask about the reel I have: Penn Sargus 8000. I disassembled it to clean and grease, I put everything back in place exactly and for some reason when I turn the handle it is a bit stiff compared to before the grease. I did not press the screws too hard and not too weak, everything is just right. I wanted to please ask if you have an idea what it could be ? Is this something common or did I do something wrong ? Thanks in advance and much appreciation
Hi Y L. Reels can be a little funny sometimes. They work fine before disassembly and then not after reassembly... even if you do it correctly. If your reel was dry inside, you should expect the crank to feel a little more sluggish after adding grease. However, I know this isn't what you're referring to... just wanted to point that out. 🙂 For your situation, I suspect you'll need to play with the shims on the main gear.... try removing one of them and seeing how it feels. Still tight? Try removing a second and retrying, etc. You want to play with the shims until the reel cranks nicely without the reel feeling rough or has rough spots. Hope this helps for your current situation and possible future ones.
@@TSGReelService Thank you very much for the direction of thought and the detailed answer, it is always interesting to consult with you and benefit from your experience. I will do what you suggested to me and I sincerely hope the reel will turn around more easily
No worries, bud. Let us know how it turns out.
@@TSGReelService Lucky there is someone to get good advice from, I did what you recommended, I downloaded one from the shims and the reel works much smoother - thanks for the help !!!
Excellent! Glad to hear it helped.
How did you put the piece on where the spool sits and the bottom half sits I can’t get it to connect
Thanks for watching. Tell me where in the video it is, so we're on the same page. Thanks.
@@TSGReelService I fixed it. Thank you
At 2947 yours is spinning very freely. If mine is not, did I tighten something too much?
Thanks for watching! I'm assuming you serviced the resl.... Try loosening the side plate screws.... If the spinning improves, you'll need to play with the shims on the main gear.
LOL thank you! I loosened up the top nut. Now I know why that plate immobilizes the nut! Great video and thanks for the help. Spins perfectly!
Bro.make a video of sea fox 4000 maintenance
Sorry dude, I may never get one of those in for service.... but will do if I do.
Donde puedo conseguir la corona para el battle ll 400
You can check eBay.
I need main gear set bro
Check the video description for help.
You didn’t show how the spring and thing goes into the bail pivot…which is what I need.
Thanks for checking out the video. Yes, I did. If you're struggling to follow along the information in a video, say that, along with the time stamp in the video, and I can try pointing you in the right direction. Try this video: th-cam.com/video/11bR51jTcfw/w-d-xo.html Good luck!
Muje bhi karna he seem reel 😞
Who is having a panic attack watching him toss around the bearings and shims with seemingly no organization?
Not sure, but thanks for watching and sharing your thoughts. Spread the word about the channel.
I u from. ??
Hi bro u from
Welcome!