Chicken Plucker assembly (Easy Step by Step Guide putting your Yardbird together)

If you are raising poultry in your own backyard, or on a small farmers market type scale, this poultry plucker will save you time, frustration and a slow slide into insanity. Here in this video I will show you step by step how to inspect and assemble your plucker. Ill also toss in a few extra tips and suggestions that will have you processing like a pro
0:00 Introduction
0:45 Why you might need one
3:24 Pricing position in the plucker market
4:30 Does it really save that much time?
4:50 Unpackaging and looking over the contents
7:35 Run down of technical specs
8:30 Tools needed
8:55 Step 1: wheels on axles
9:48 Step 2: assembling Legs to motor and plate
12:40 Step 3: assemble axles
14:30 Step 4: Install bottom rotational plate w/ fingers
17:00 Step 5: Install outer body to base
18:05 Step 6: Additional part recommendation
19:10 Congratulations! You successfully assembled your yardbird/ Closing remarks

[@Clark4345]

Excellent video! I was assembling my Yardbird Plucker and started wondering if I was doing it right. The instructions are pretty sparse. You video cleared up all the issues. Thank you.

[@robertarguello1115]

You asked me to give a reply on how I go about tightening a nut & bolt? Well, since the hex-nut is the stationary component, I use a wrench to secure it. And then, I'll use a socket to rotate the nut (the movable component) until it has tightened sufficiently. Okay! Now you know how I go about tightening a nut and bolt. 👍

[@ronreposa4893]

I thought this was a very good installation video. I’m going to run it during installation. Thank you.

[@GritandGrace]

Your welcome. Happy processing

[@MADuranDude777]

Have you figured out a solution on how to keep water from leaking out the sides?

[@GritandGrace]

Are u talking about at the fitting

[@stevenreeves4766]

why is the finger not already installed? you did not really show how to get it in there

[@renatotorejan7283]

I like that chicken plucker and how to order please

[@GritandGrace]

Tractor supply has them. It’s called the yardbird. About 450.00

[@GritandGrace]

Lol who gave me the thumbs down? Haters

[@bryanlumilan6692]

is it okay for the electric motor to get wet?

[@GritandGrace]

It’s a sealed motor with water proof electrical casings. The designed with water protections in place