Thanks mate for the videos. I look forward to seeing these pop up. I’ve got one of these old girls in the paddock and I know the the day will come where I rely on these videos to get me up and running again. Good work!
I welded extensions into bolts, as place was too tight for socket tool. I also changed quality rubber fuel hoses in and out of the fuel pump. And I used gasket silicon as the new thin paper seal leaked all over the place.
The threaded hole in the block are open, and if you use bolts you will have engine oil leaking. Replace the bolts with studs. Fit the studs with sealer/locktight, then fit the gasket and pump using nuts and spring washers.
Generally yes, however this is how the Fordson lift pumps are installed, video is correct. Sediment is caught in the mesh screen and excess air is trapped as well.
Thanks mate for the videos. I look forward to seeing these pop up. I’ve got one of these old girls in the paddock and I know the the day will come where I rely on these videos to get me up and running again. Good work!
Hello sri
I am from India
I also have this tractor
I want something like this
Are there a new spare parts for this tractor 🚜
I am from Iraq 🇮🇶 ،search for it❤
I welded extensions into bolts, as place was too tight for socket tool. I also changed quality rubber fuel hoses in and out of the fuel pump. And I used gasket silicon as the new thin paper seal leaked all over the place.
Those bolts were a pain, too small of a gap for a socket, not enough room for a spanner to properly swing
The threaded hole in the block are open, and if you use bolts you will have engine oil leaking. Replace the bolts with studs. Fit the studs with sealer/locktight, then fit the gasket and pump using nuts and spring washers.
I know this is 2 years late. You showed the Sediment Bowl upside down. Dirt or sediment does not fall UP.
Generally yes, however this is how the Fordson lift pumps are installed, video is correct. Sediment is caught in the mesh screen and excess air is trapped as well.