B2601 FRONT END LOADER UPDATE You won't believe what is wrong!
ฝัง
- เผยแพร่เมื่อ 22 เม.ย. 2021
- Well I can't wait any longer. got to give you a update video. This is just my experience so far.
This video is for entertainment purposes only.
DISCLAIMER:
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
By using some of the affiliate links above, I may receive a small commission, at no extra cost to you. This is the easiest way to support me and helps me continue making content like this for you. Thank you 🙏
Due to factors out of my control, I cannot guarantee against improper use or unauthorized modifications of this information. I assume no liability or responsibility for property damages or injury incurred as a result of any information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and/or with tools seen in this video. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not me. Be safe! - บันเทิง
![🎮เกมยิงปืนใหม่ ภาพสวย และ สมจริงที่สุดในโลก [ BODYCAM ]](http://i.ytimg.com/vi/My3l1owRY9I/mqdefault.jpg)
Thanks for watching! Please help out the channel by hitting the subscribe button and giving the video a thumbs up!
Simple fix………increase the tire pressure in one tire and less in the other. Keep tractoring
💥 Next time you do burnouts with your tractor make sure you're using the diff lock so you get even wear on both tires. Seriously though, that would be enough to bother me to want it corrected also.
*Keep on tractoring!*
Doing a burnout might still be a good idea I just got to find out if the taller tire is the Bad tire I like this idea I can make a video on how to do a burn out on a tractor have a good weekend Jon and keep it on the sunny side☀️☀️☀️😁
Had the same issue on my BX. For me, it was a 9 year old used tractor, but my right tire was an inch higher than the left one. So me being frugal, I buy only one tire (I mean the tires only had 140 hours on them). Once I mounted the new tire and installed, then the left tire was 3/4 taller than the right. So now I have two new tires on the rear. My guess is one of the previous owners over or under inflated the tires and destroyed the cords inside. Fun fact, the original right side was so much bigger around, I couldn't install a mower deck without rubbing the tire. Thanks for the update. Jason
Wow that’s crazy it’s more common than I thought thanks for your comment have a good weekend and keep it on the sunny side🙃☀️👍
For now, air down the taller tire to meet the spec? Just an idea.
Thank you for your comment and idea I will try that first thing have a great weekend and keep it on the sunny side☀️🙃👍
Great video mitch, hopefully they get the tyre sorted.
They just called yesterday and it was approved and they ordered a new rim and tire ☀️😁👍thanks for checking out the video ☀️
Wow, what a frustration, glad to hear the dealer is working towards a resolution. As for yelling at the camera...as demonstrated elsewhere, as far as I'm concerned that's standard operating procedure!
I keep thinking 🤔 I should get a mic but I think it would break 🤣thanks for checking out the video ☀️☀️☀️😁👍
You weren't kidding! That is crazy!
First time for me in 47 years learn something every day have a good weekend☀️😁👍
It is amazing that you caught this. Makes me question now if that bracket they replaced was bad.
I was thinking the same but don’t have the old one to compare it with not that it matters it was all under warranty. Thanks for checking out the video.😎👍
Cool that dealer has sorted out whats wrong. ROPS down in storage warning. It hurts the head to bang into in case you haven't had the experience yet.
Oh yeah I’ve hit my head many times luckily I’m hardheaded and it didn’t scratch or dent the ROPS thanks for commenting have a good weekend🙃☀️👍
Damn what a pita. Like you said it it good the dealer is working with you. Ken b2601
Yeah it is! but it will get fixed soon thanks for checking out the video ☀️👍😎
I think I mentioned this exact situation in your original video. Sometimes the same size tires from different manufacturing runs are off in size. Same with my BX. You can let out a few pounds +- of pressure in the larger tire and the bucket will drop level. Worked for me with turf tires.
Yep I do remember your comment they did give me a new tire that was closer in size I will try fine-tuning it with air pressure like you said thank you for your help🚜💨💡😁👍
@@MJADoingStuff : Maybe bump up PSI on the left rear and front a pound or two, and drop the right the same. Then look forward to buying a new set or rears some day. Hopefully both the same, both made in the same factory, same production run. I had not considered that. Very important!
@@horacesawyer2487 I would make sure before you pick it up! They delivered mine and I was pretty much stuck with the problem until they figured it out and got me a new tire. Have a great week.
Summer is coming. I noticed last night that we have asparagus just starting to come up. Always a good sign.
That’s awesome! Asparagus is some good stuff. I can’t wait for some warmer weather.😁👍
Hi Mitch, the specs/tire size stamped in the tires are the same but the tires are different, now that would be a major production error, you’re probably not the only one with this problem 😳. Have you tried taking some air out of the bigger one to see if that would help temporarily? Have a great sunny 🌞 weekend 👍🏻
The dealer said it is the third one this year. I will let some air out and give it a try for now thanks for the idea you have a good weekend too and keep it on the sunny side🙋🏻♂️☀️
Wow Mitch, That is an interesting find. Interesting that there are multiple issues on a new tractor. Wonder if it were a Monday or Friday build.
Where this is an old video I will look to see if you did a final update on the tire issue.
Thanks for posting...
Hey Dan I did finally get the tire and it helped but still not perfect. They said it was in spec now and I am over it. Moving on. I never knew tires were different size tolerance till now. I may have OCD on top of it😂👍 Have a great day !!!
@@MJADoingStuff Mitch, which tire ended up being out of spec?
@@danielrapoza8468 The Left side was smaller.
Same issue on 2020 lx2610. Same tires. I just bought it used. I'm going to try and get either kubota or Goodyear to Hopefully make good. Wish me luck. One tire is 1 inch taller than the other! It throws the loader level off 1 1/2 inches! From one side to the other.
Sorry to hear about that but at least you know what the problem is😁and that’s half the battle😁👍🚜💨🍳
I guess I’m odd duck out. I figure that it is in fact a Kubota warranty. If they put that tire on the tractor and then sold it to you, it is their problem to deal with the tire company. The dealer should have put a new tire/ tires on and sent you on your way.... no waiting. Kubota international has lots of power to get compensation for this.
The dealer had no R14 in stock so I had to wait. They called this past week and said it was approved and ordered a rim and tire coming from Kansas. Almost done with this. I thought the same thing about the Kubota warranty too. Thanks for checking out the video ☀️😁👍
great video, what a headache with the tractor, i bet you spent hours trying to figure it out yourself too,.
Yep 👍 I did spend some time. Should have said something when I first got it. Thanks for checking out the video ☀️😁👍
The tire size difference could damage drive gears do to circumference difference.
Very true 👍 I have not noticed any problems but it could be something down the road. Thanks now I have something new to think 🤔 about 😂 Thanks for checking out the video 😁👍
How do you like them tires? Do they pull good in dart? Was looking at buying a set that style for my tractor.
For me they are a good year round tire I use them on snow mud and dirt seem to clean out well I even mow the lawn with them. Thanks for checking out the video I do have other videos on the R14 🚜💨💡😁👍
Great video. Very good information. Just guessing, is this a 2020 model tractor? Seems like quality control went to the non-Sunny side then. Or maybe it's a 2021 produced in 2020. But with the backlog and slow support movement, maybe it's a 2022 produced in 2020. : )
Ok I shut up.
2019 was the year I purchased it so maybe it was made in 2018 l believe the B2601 started to sell in 2018 but I could be wrong😂👍🚜💨🍳
Bro you keep on yelling at the camera. This is an awesome video. Who would think it's the rear tire on their first assumption?
I was a little amped 😂 I think I am losing my hearing too. I would have never thought to look at the rear tires. That’s for checking out the video😁👍🚜💨🍳
That’s crazy it’s off like that now I want to look at my b2601 I have same front end loader and tires ...maybe I don’t want to look at it lol seems like a headache to get resolved
It’s not as bad knowing before you start the process that it’s gonna take some time to get fixed have a good weekend☀️🙃👍
@@MJADoingStuff mine seems ok thanks God! Lol good luck and thanks for the update
did you get the new tires to correct this issue, I'm having the same problem with my New kioti 2610?
Yes but it still is not perfect from what I was told the tolerance is plus or minus 1/2 on the tire radius and it was Warranteed by the tire company so it took a while to get a replacement by the dealer Hope that helps 😁👍🚜💨💡
@@MJADoingStuff mine is about an inch and a half off with r4 tires. This a real problem if it gets tweaked that easy there is bigger problems with the light weight design. Mine was like this from the day I bought it so no tweaking happened with my Kioti it was just a manufacturing issue.
Mitch, keep me posted on this because I retired from the tire industry and am very curious about what the root cause is.
Hey Frank Unfortunately they didn’t tell me what the root cause was just that it had been the third one that they had seen that was out of spec. I finaly did get my replacement wheel and tire. Thanks for leaving a comment ☀️😁👍
I'm confused. Is it that you're worried about the bucket being out of level by a 1/4" because the terrain I live in, the bucket is never even to the ground, like not even close.
When I took it to the dealer it was 3/4” off after the loader mount it looks better but still off the dealer found the rear tires were different size so I am going to let them sort it out they also feel it should be better. Thanks for checking out the video ☀️😁👍
Wow! Now I am going to go out and measure my rear tire heights! Maybe you could just ratchet strap that piece of wood to your tire. Then all would be good!! Cheers!
Yep 👍 I am really stirring the pot with this video I was also thinking about getting a few rolls of duck tape and wrapping it around the tire till it was thick enough🤣 thanks for watching the video Mike Have a good weekend☀️🙃👍
How did you end up? Did the dealer fix this issue? I have the same tractor with the same issue. I sent them this video. They said they all do this. I would like to hear how things got fixed. Thanks
I have been waiting for the rim and tire to come in and was out of town but I called the other day and it showed up now I have to drop it off but am using it to do a project so I have to wait. Did you check your rear tires?
@@MJADoingStuff yes. My left side is higher by an inch. I took off the loader a few days a go and had trouble getting it back on. I plan to get my dealer to fix this. Thanks for your note. Keep us posted.
@@robwilson6775 No problem hope everything works out for you and thanks for checking out the video. 😁👍☀️
Don't forget to throw in a quick update when this is all fixed.
Thanks for reminding me 👍I did get the new rim and tire. I will do a short clip in a upcoming video. ☀️😁👍🍻
I think mine is the same and is having the same issue.
Probably If you have K-tac you should be covered have a great weekend 😁👍🚜💨☀️
Good news I guess you're loader arms aren't tweaked
Yep 👍 that is Good news 😂👍
Got the same problem??????
Hopefully you are still under warranty. 😁👍🚜💨☀️
Well you would think it would be on the dealer to give you one or the other Tire to match.. and they could worry about the manufacturer that they ordered the tires from.... I wouldn't have that much patience with them I'd be pissed
Normally I would get upset but it was winter and I was not using the tractor as often as summer. In the end it all works out thanks for checking out the video and leaving a comment😁👍🚜💨💡
Quality control somewhere went wrong for sure! 🚜🪵🇱🇷👍🏼
Very True you would think if they made tires that week or month they should be close in size. I did get my new tire and rim. Now we are with in 1/4 inch close enough for me. ☀️😁👍