Thanks for explaining the 1.38x height of top hat spacer. I haven't seen anyone do that and was wondering how my truck was so much taller with only a small puck.
I'm considering this kit for my 2018 and this video was exactly what I was looking for. Wanted to see a good look at the CV angles. That's the only thing I was really concerned with. But in my old 2003 f150 I had a 2.5 inch lift on it and the front cv's were at a much more extreme angle. The boots tore on them but they still worked fine. Never broke one or bound at all. So I think this kit should be fine. Especially since the CV's only turn when you are in 4wd. In 2wd they disconnect from the hubs.
Hey, I’m a unrelated question, how do you like your anzo tail lights on the truck? Bin reading a lot of complaints about fitment and moisture getting inside of them, how has your experience bin with them?
Truck looks great man ! Hey im curious as to what mudflaps youre running ? I just installed a 2” front level and 315/70/17 BFG KO2’s on my 18 F150 last week and had to remove my stock front mudflaps cause they rubbed so now im looking at other options that wont rub. Thanks
Clean F150! Where did you get that grille?! I’ve been trying to buy a raptor grille for my 2019 but all the ones I find on eBay look very bootleg in the pictures. I like how yours has the full honeycomb even behind the letters. Thanks!
Im considering this kit or going with a set of Bilstien 6112's. Could you elaborate on the spacers that are in the picture of this kit. I know it says it includes "sway bar spacers" but it also looks like they give you two "pucks" as well. That's what I'm curious about.
Ya unfortunately I wasn't thinking about a TH-cam channel when I installed the kit. This video was an after thought. But there are lots of pages like American Trucks Ford that have lots of in depth install videos.
![[LIVE] : ONE ลุมพินี 87 วันนี้!! คู่เอก "ก้องชัย vs โชคปรีชา"](http://i.ytimg.com/vi/YN6e7HVnekw/mqdefault.jpg)
I have a 2019 F-150 and put in the 3" Rancho lift. I installed 295/70R18s with the 2021 6 spoke grey machined F-150 rims with 1/4" spacers up front.
Thanks for explaining the 1.38x height of top hat spacer. I haven't seen anyone do that and was wondering how my truck was so much taller with only a small puck.
I'm considering this kit for my 2018 and this video was exactly what I was looking for. Wanted to see a good look at the CV angles. That's the only thing I was really concerned with. But in my old 2003 f150 I had a 2.5 inch lift on it and the front cv's were at a much more extreme angle. The boots tore on them but they still worked fine. Never broke one or bound at all. So I think this kit should be fine. Especially since the CV's only turn when you are in 4wd. In 2wd they disconnect from the hubs.
Feel free to check out my Instagram account @project_cyborg for more pics 👊
Truck looks great! Where did you get those mud flaps? Those are the best looking ones I’ve seen!
A company called Rek Gen.
Great video. CV and tie rod angles actually look decent. How much did this kit run you and how is it holding up?
Nice truck. I like that stance personally.
Great vid, but the big problem is not just getting the lift. Its buying an new set of wheels and tires (plus winter set as well for us in Quebec)
But a set that can do both :) I'm from Winnipeg
@@fiftynation you got a point ! i'll see when my tires need to be replaced
Hey, I’m a unrelated question, how do you like your anzo tail lights on the truck?
Bin reading a lot of complaints about fitment and moisture getting inside of them, how has your experience bin with them?
They're trash, non stop condensation haha
Truck looks great man ! Hey im curious as to what mudflaps youre running ? I just installed a 2” front level and 315/70/17 BFG KO2’s on my 18 F150 last week and had to remove my stock front mudflaps cause they rubbed so now im looking at other options that wont rub. Thanks
I was just going to ask the same thing. Im more interested in the flaps than the rancho shocks
Nice truck, Looks great! How is the ride compared to stock? Any problems yet with cv angles? Thanks for the info, Very helpful.
Clean F150! Where did you get that grille?! I’ve been trying to buy a raptor grille for my 2019 but all the ones I find on eBay look very bootleg in the pictures. I like how yours has the full honeycomb even behind the letters. Thanks!
I got it from a comoany called XpriteUSA but I don't believe they sell it anymore
The truck look nice. Man, you cant trade that in..lol
Im considering this kit or going with a set of Bilstien 6112's. Could you elaborate on the spacers that are in the picture of this kit. I know it says it includes "sway bar spacers" but it also looks like they give you two "pucks" as well. That's what I'm curious about.
There just 1/4" spacers that sit on top of strut to help achieve the 3 inches
Looks good.
When do you have time to do all this when you’re busy throwing touchdowns to Davante Adams!
Would doing this kit but with 1 inch blocks make it more level?
I went back to OEM blocks and it's perfectly level
@@fiftynation gotcha, I’m assuming the new shocks kinda help with that? I’m just trying to avoid squatting at all costs
Can you tell me where you got your head and tail lights from and also where I can find that Ford grill?
Healights are from @alpharex tailights are from @anzo grill was from a comoany that no longer makes them
Great video, did you have to do an alignment?
Yes, I always do alignments after any suspension adjustments
Would this fit 35x12.50 mud terrains ?
It would depend on your wheel offset. If you have an oem wheel and did some trimming in your fender then yes
Is yours an fx4 package ?
It is yes. With 302A package.
can you link this product
Any cutting
No instal video
Ya unfortunately I wasn't thinking about a TH-cam channel when I installed the kit. This video was an after thought. But there are lots of pages like American Trucks Ford that have lots of in depth install videos.