TWO big-ass thumbs up! I was hired yesterday to mount a TV and microwave. Although I’ve mounted tons of TVs, I’ve never done a microwave before in my life. After watching this incredibly descriptive video, I not only sounded like I’d done this before, but the job came out perfectly! Thank you so much!!!
I bought a 56 lb. microwave that I was trying to install above my stove underneath a cabinet. I never would never have figured out how to angle it to get it on the track without watching your video. I cannot thank you enough for going to the trouble of posting this video. God bless you.
Almost 4 years later, this is the BEST install video. If you follow his instructions, especially with the tile backsplash, your install will be flawless. An actual installer couldn't have installed mine any better. Thank you HouseImprovements, from a new subscriber!!!
This is the video that saved me a year or two ago. My wife just bought a new house a month before we met, when we weren’t super serious she bought a new microwave/range to exhaust through the roof and she hired “professionals” to install it. Two years later the microwave/exhaust gave out and completely quit working. I found a new unit on Kijiji for $50 CAD that worked perfectly and this video helped me figure out how to take the old one out/down and put the “new” one up. We now bought a new house which doesn’t have any over the range exhaust and my wife misses the microwave/over the range exhaust and this video helped me graciously to understand how to start one from scratch, thanks!!
Believe it or not I bought the very same microwave, and the same cabinets. I have read the installation instructions several times without understanding, everything was as clear as mud. Your video is clear and concise to the point and easily understood, made installation crystal clear. Thanks to you this job was without headache. I can not say Thank You enough, keep up the good work.
Guy that installed mine a few years ago never changed the flow of the exhaust and I never noticed until I had to redo the vent to outside. Didn’t think it was this easy, thanks
we just bought a house and this is one of the main updates the wife wants me to do ASAP after we move in.. i knew this task was simple but man you made it look like a no brainer. awesome video!
Super helpful video, Shannon. Thanks so much. The challenging part for me was working with walls that were not square which was going to effect the ability for the door to fully open. I figured out a slightly off-centre position for the back plate on the wall, drilled an oversized hole for the power cord then "dry" mounted the microwave. My son held it in place and by tipping it down a bit, I could see the line where the two top screws had to be. We then removed the microwave, put up the top template and lined up the screw holes we marked with the template which gave us the depth. We drilled the top holes and they lined up perfectly. As desired, the microwave was positioned a bit off centre so the door could swing fully open without hitting the adjoining wall.
Great video as always ! The only one tip from my MW installation experience with all that kitchen cabinets quality that could be a good idea to use large diameter washers for those upper bolts or sometimes plates if the upper shelf had a bunch of holes from previous installations . After few years of usage the smoke and steam from MW vent makes top shelf "wood " softer and bolts start sinking thru the wood in cheap cabinets (seen it many times in last 20 years installing MWs)
You are not only very good at what you do but I find you are a very good teacher.Whoever got to apprentice with you would have been a lucky person.I always found it was so much quicker just to do the work,but to properly explain and show someone,they would have been shortchanged on the explanation end.I had an excellent Master Carpenter,with many years of knowledge giving hands on teaching.I asked him one time,what do you want me doing..."Just watch what I do",what he didn't know was I always watched what he did whenever possible.Nothing like experience from those who did it best.Keep up what you are doing,this is the only channel I look for knowledge,THANKS (I could have posted this on any of your videos,not only this one).
This is the second video I've viewed for help with appliance installation from the Houseimprovements channel (the first was for built-in dishwashers installations). Thank you! Your videos are a breath of fresh air for us non-professional DIY-ers!
I watched both the removal and installation videos and I now feel that I can absolutely do this myself. I honestly appreciate the fact that you leave in the parts where you have to refer to the manual. We all do. These videos are very well done and please keep them coming! You have a subscriber for life!
I had just finished the install of my new microwave after watching this and it went so smooth without any cursing, lol. I also ran into the same issue where the hanging bracket would be halfway on the backsplash tile. I had to use a piece of 3/8" plywood to "build it out" as you say. Also, great tip on having to move the upper cabinet template out to compensate for the 3/8" being built out. That little tid bit of info right there probably saved me from having to make swiss cheese out of the cabinet and most likely cursing out loud. Thanks Shannon!
hey Dave, I know this was 5 years ago lol, but I'm just about to do the same. Did you get longer lag bolts to allow for the thickness of the ply? My ply is 1/2" and the bolts are 2". Seems like using the originals would reduce the penetration of the stud significantly. TIA (if you can even remember!)
For a 40+ years DIY guy, I must say BRAVO!. An excellent description of the task and details for the novice installer. Thank you so much for your great video contribution to TH-cam community. Great Job and many thanks. Now it is time to look for your other videos. I am hooked. :-)
I have had contractors tell me I need to run a dedicated line for my existing microwave, two of them so far, so this video saved me a lot of money - Thanks so much. There are hardly anymore honest contractors left these days, most want to rip you off.
It's electrical code for microwave to have a dedicated circuit, the plug he was using would be a dedicated plug so effectively the microwave is on a dedicated circuit, which is how we typically wire new houses. FYI, dedicated circuits in your house: fridge, microwave, dishwasher, kitchenette, stove, dryer, washer, furnace, water heater, sump pump, outside plugs (GFI's). Also, 1 circuit per two 20A kitchen countertop plugs. You should probably listen to contractors over assuming things from youtube clips.
Thank you so much! We opted to do it ourselves instead of paying $130 for installation. The unit showed up and we got pretty intimidated. Watching this video assuaged our fears and gave us the tips we needed to succeed. Y’all are awesome!!
When drilling the holes in the shelf, drill a small pilot hole and then drill the larger one from the top down. It keeps you from splintering the inside of the cabinet where it might be seen.
Your uninstall and now this install video were a HUGE help. The tile backsplash on my wall went halfway up the back of the microwave, so I had to drill right through the tile. I didn't have masonry bits, so I sacificed a few wood bits to the "honey-do-list" gods rather than making a trip to the hardware store. Worked out just fine in the end. Thank you again for the excellent how-to videos. I'm eating a plate of warmed up leftovers as I type, thanks to you. ;)
I honestly didn’t “learn” anything from this video but I watched it as a refresher before I installed a new one in our house (same microwave actually). Of all the videos I could have watched on the subject I searched to see if you had one first and as always, it was extremely helpful. Thanks!!!
Just installed one today in a house I'm flipping. Couldn't locate the studs so I installed 4 wall anchors with 2" lag screws, but my bracket was as big as the back of the microwave. Good video!!!
Yikes. I pity whoever purchased that house. When 60 pounds of microwave comes ripping through that wall. ... on second thought... the top anchors should do their job and hold most of the weight up. Let’s hope you didn’t cut corners with the cabinetry.
A great thorough and very clear instructional video. Watching this made installing our unit a breeze. Ready to install another one and watched again to refresh my memory. This actually made the installation a fun project. Thanks for all the great videos Shannon!
It shows his high self-confidence either, otherwise he could re-edit the video and cut that footage. Although I can't even dream to have such a kitchen neither these appliances, but I enjoyed watching this video.
Thanks for this video being a single female that now owns a home and have to things myself I want to thank you for this video. I love the way you gave the info step by step and explained why. I also like that you explained the other options that you may be faced with when it came to the venting of the microwave. That's the first place I got lost so since I came to you to see how to take the old one down. I came back to see how to put up the new one. Thanks again for being through with your instructions,
Your videos were excellent, because of you I can get someone to help me remove and install a microwave over the range. I loved your details so now I know I’ll need to remove cabinet doors, a 1/4 inch x 30 inch plywood x 6 inches to meet the tile backsplash, a light drill, drill bit for hanging/screw, hole cutter for cord, spade bit to hang microwave from cabinet, screwdriver, stud finder, cardboard to slide microwave on countertop, scissors to cut templates and steps tool to get up and screw microwave into cabinet. I can do this with a strong helper. Ty
Thank you for the help. It had been several years since my last microwave remove/install. Watching you made the whole process so much easier. The old one is out, the new one is in. One person install just like you did. Your videos are great ! Clear, concise, and to the point with no added nonsense. I am subscribing now !
Thanks for making this video. I've replaced lots of appliances, but never an overhead range microwave. Having a visual tutorial was reassuring before jumping into installation.
Great video! It has clear and userfriendly directions to follow. You did a great job explaining how to to this. By the way, I like to be able to see the unexpected things that we can run into while doing this kind of installation. Keep making these videos, so we can access to them and not be afraid to tackle projects like this.
Cannot thank you enough for this video and excellent information. The way you showed each step, the how and why helped me to install my microwave. The idea to use an extra piece of wood for the mounting bracket and how to mount the bracket got me past the biggest problem. Took me about 1 hour from taking out the old microwave to installing the new one. The other best part is saving $130.00 by installing it myself.
Thanks for the video. This is how you do a how-to video. You got straight to the point w/out unnecessary, excessive verbiage! Well done sir. And thankfully I watched it prior to ripping into the box and ruining the templates which I would have done without this information. Thumbs up!
Putting one in an old farmhouse. More of a visual learner than reader and you just save me a few hours of cussing and throwing tools. Glad you showed how to use the drywall screw because i have no idea where studs are due to plaster and lathe strips throwing the studfinder off. Awesome video thank you very much!!!
mike,having been a carpenter for lots of years now,i make a habit to use a finish nail 8 or 10 penny to double check stud location,even more so with lath plaster stuff,never really counted on stud finders
Thank you! Mine is on my last legs and I will be DIY-ing it this time. I trusted the cabinet installer to install my last one which never vented as well as I thought it should have. I'm now taking bets with myself that when I remove it, the blower won't have been turned to face the duct.
i feel stupid that I've had my new microwave oven sitting on the counter for at least a year while i procrastinated over the install. thank you for the video which makes the install seem absurdly simple (like reading the instruction manual I guess)
Awesome video. I watched this and your microwave removal video too, got the project done almost exclusively off these two videos alone. Simple, to the point. My microwave was the same brand as in this video so that made it all the more simple. Same bracket, same hardware, same templates.
Great video and that cut-out template are very accurate! I'm just glad I found both the wall studs! The next step, later on, is running the all-new exhaust from the cabinet to the attic through the roof!
Excellent demo. Proves even pros need to read the instructions sometimes. Makes me feel a little better, lol!😂 His previous video on how to remove the microwave was also spot on. 2 people to help with the weight will be a great help. Some of the units are bulky and heavy.
Brilliant. We just bought this exact same Microwave from a scratch and dent store, installing it where there previously had not been a unit. The whole thing perplexed me. You helped me solve the template issues. Seriously AMAZING!!
Thanks Shannon! Have been watching your channel for a few years. I'll be doing a microwave like that, fridge with water/ice maker, and putting a dishwasher in our new house very soon. It doesn't currently have a dishwasher so I found your electrical/plumbing video for dishwashers really handy. I appreciate your very detailed style and you're also Canadian which helps a lot with relevant code etc. Thanks!!
Just installed mine last night. I wish I had come across this video first. I removed pieces of my backsplash, and now I’ll have to repair it. The install came out pretty good though.
A really informative video and easy to follow along. Thank you for including instructions regarding the butterfly bolts. That was exactly the instructions I needed.
My Dad and I need to install a microwave this weekend and I wanted to get an idea of how easy/difficult the installation process would be. This video has been extremely helpful and I have a feeling it'll come in handy for us when it comes time to put the microwave in. Thank you!
Old lady here - first time seeing Shannon. Love this video, and made me laugh when you couldn't find the screws at the first and ultimately said, "I'll take a look at the instructions." You are so cute, young man. I just fixed the door switch on a microwave via TH-cam vids and now have to hang it without templates. What's the worst that can happen? Haha
Appreciate you taking the time to explain the vent setup. The previous homeowner had an outside vent but it was vented inside. This is will really help out when we burn dinner. Thanks.
Thanks Shannon for taking time for make the videos you do! I am always pleased when your videos show up with whatever type of project I am looking to do. Your videos are well done and easy to follow. :)
Because of this video. I took out my van assembly and positioned it to blow out the front. I DID NOT HAVE A EXIT ventilation fan. Thank you so much for this bill deal. I hope this helps someone else. My microwave vents out the front.
Almost threw out the back wall template but after watching your video went out to trash container and recovered the back wall template. Also, had to read instructions to reposition the blower unit. Thanks for excellent review of installing microwave.
It's amazing that just about every manufacturer has the top mount screw holes in a different location. Even if you replace an old microwave with a new one from the same manufacturer, there is no guarantee the holes match. I can understand why one manufacturer doesn't want to use the same locations as a competitor uses ( gives you incentive to go with the same manufacturer when replacing the microwave in the future ) but can't for the life of me understand why one manufacturer would change the hole locations on their own product . That goes for the wall mount bracket too. They keep changing that around which makes even less sense, AND.....just to mess with you a little more, they keep changing the height of the microwaves so even if they use the same wall mount bracket, you have to relocate it, AND... if the new microwave is less in height and your tiles went flush against the old microwave, you now have a gap under the new microwave. Keeps installers busy though
Keep in mind wherever there are screw holes on the top there has to be dead space inside to accommodate the screws. So depending on the internal mechanics, they may not have much option when it comes to location.
Thanks for this video, our 7/yo Samusung just shit the bed and this helped let me know how it was secured to the wall and cabinet! Saves us $140 for the install on something that is super easy to do.
Recently purchased my first home and got my hands dirty saving bucks getting it installed by the pros, been holding up and decided to thank you for the help!
Great job and presentation. When I opened the box of my new microwave and read the instructions, I couldn't quite understand the instruction. So I searched for a vieo on how to install it and glad I found yours and played. But first I have to remove the current exhaust system on top of the stove. We had a counter microwave before and we had the exhaust above the stove. There was no microwave on above the stove before.
HouseImprovements I’m glad I measured before I installed. I measured the top of the vent that is there and it’s 15” to the end of the cabinet. The height of the microwave I bought is 17” and the bottom of the microwave if installed is too close to the top of the gas range. I have to find a microwave that will fit. I’m also glad I did not yet remove the vent.
I put in over the range microwaves for my job, run into a lot of old cabinets with old wood or press board I usually use large washers up top to distribute the weight more also his particular cabinet had a flat bottom so the hole for the cord had to be new so the microwave sit's flat but I can usually use the old hole and stuff the remaining cord down into the cabinet
Thx for the non perfect install of the microwave unit. Every install is different and you never know whether it's simple install or a total rebuild. Thx again for this raw format, its more realistic than some of the other ones I've watched. Cheers!
Outstanding video. I really appreciate how you show the difficult challenges that someone might run into - like the framing where you want the vent, and the tile under half of the bracket. I wish I had watched this before I paid a "pro" to do it. He didn't turn the blower to the back (for wall venting) and he didn't check the existing cutout in the wall to be sure it was big enough (it wasn't). After watching this video, I fixed everything myself. Thank you for making this!
Thank you, Shannon! This was exactly my new replacement install. You covered everything that I needed to know with the same tiles, to needing some 3/8 plywood to having to drill a new hole. The only thing I did not have to do was the top vent. It did take me much longer though even with reading the instructions.
Thanks again. I tend to check for your vids before tackling any project. Kinda with I could go for a beer with you cause youre like my "go to buddy". LoL.
Thank you, I have installed several over the range microwaves and only thing I would had done differently is use a level (regardless of template) when drilling back wall mounting. Also a trick of mine is to place a wood surface such as a plywood board on top of the stove and then place two plastic boxes such as milk storage boxes or just storage boxes which will raise the microwave and make it easier for one person to mount. I watch most of your videos although I am a professional, just cause I enjoy them.
Appreciate you taking the time helping out in making this video and not editing out the few seconds on figuring out how to take adjust the blower fan. Thank you helped out a lot
You are awesome. NO loud music. NO goofy lines or unneeded rhetoric. Thanks.
TWO big-ass thumbs up! I was hired yesterday to mount a TV and microwave. Although I’ve mounted tons of TVs, I’ve never done a microwave before in my life. After watching this incredibly descriptive video, I not only sounded like I’d done this before, but the job came out perfectly! Thank you so much!!!
Jason , fake it till you make it.
Hope you used the washers and did not leave them out like the video. That's a big No No!
Haha! I'm about to do the same thing today. Never done it before😂
I bought a 56 lb. microwave that I was trying to install above my stove underneath a cabinet. I never would never have figured out how to angle it to get it on the track without watching your video. I cannot thank you enough for going to the trouble of posting this video. God bless you.
Hey,ASSMAN,you have the plates like Kramer
@@martytruelove5026 Giddy up! Thanks for your great comment.
Almost 4 years later, this is the BEST install video. If you follow his instructions, especially with the tile backsplash, your install will be flawless. An actual installer couldn't have installed mine any better. Thank you HouseImprovements, from a new subscriber!!!
Glad it helped!
This is the video that saved me a year or two ago. My wife just bought a new house a month before we met, when we weren’t super serious she bought a new microwave/range to exhaust through the roof and she hired “professionals” to install it. Two years later the microwave/exhaust gave out and completely quit working. I found a new unit on Kijiji for $50 CAD that worked perfectly and this video helped me figure out how to take the old one out/down and put the “new” one up. We now bought a new house which doesn’t have any over the range exhaust and my wife misses the microwave/over the range exhaust and this video helped me graciously to understand how to start one from scratch, thanks!!
I love the real-time problem-solving at the beginning.
Believe it or not I bought the very same microwave, and the same cabinets. I have read the installation instructions several times without understanding, everything was as clear as mud. Your video is clear and concise to the point and easily understood, made installation crystal clear. Thanks to you this job was without headache. I can not say Thank You enough, keep up the good work.
Believe it or not, i just got the same microwave, same cabinets and knobs and exact same backsplash.
Believe it or not same same same😅
Guy that installed mine a few years ago never changed the flow of the exhaust and I never noticed until I had to redo the vent to outside. Didn’t think it was this easy, thanks
I've watched dozens of Shannon's videos......no one does a better job of explaining DIY projects than this guy! Excellent video!!
we just bought a house and this is one of the main updates the wife wants me to do ASAP after we move in.. i knew this task was simple but man you made it look like a no brainer. awesome video!
We have a second one as well if you require venting it out side.
Super helpful video, Shannon. Thanks so much. The challenging part for me was working with walls that were not square which was going to effect the ability for the door to fully open. I figured out a slightly off-centre position for the back plate on the wall, drilled an oversized hole for the power cord then "dry" mounted the microwave. My son held it in place and by tipping it down a bit, I could see the line where the two top screws had to be. We then removed the microwave, put up the top template and lined up the screw holes we marked with the template which gave us the depth. We drilled the top holes and they lined up perfectly. As desired, the microwave was positioned a bit off centre so the door could swing fully open without hitting the adjoining wall.
Great video as always ! The only one tip from my MW installation experience with all that kitchen cabinets quality that could be a good idea to use large diameter washers for those upper bolts or sometimes plates if the upper shelf had a bunch of holes from previous installations . After few years of usage the smoke and steam from MW vent makes top shelf "wood " softer and bolts start sinking thru the wood in cheap cabinets (seen it many times in last 20 years installing MWs)
The microwave comes with them but he must have forgot to use them or didn't think they were necessary. I use them myself.
Good tip!
You are not only very good at what you do but I find you are a very good teacher.Whoever got to apprentice with you would have been a lucky person.I always found it was so much quicker just to do the work,but to properly explain and show someone,they would have been shortchanged on the explanation end.I had an excellent Master Carpenter,with many years of knowledge giving hands on teaching.I asked him one time,what do you want me doing..."Just watch what I do",what he didn't know was I always watched what he did whenever possible.Nothing like experience from those who did it best.Keep up what you are doing,this is the only channel I look for knowledge,THANKS (I could have posted this on any of your videos,not only this one).
Thank you Marty!
From all Anti-instruction Readers everywhere: Thank you.
🤣🤣🤣🤣
😂
😂😂
😂😂😂
Here here
This is the second video I've viewed for help with appliance installation from the Houseimprovements channel (the first was for built-in dishwashers installations). Thank you! Your videos are a breath of fresh air for us non-professional DIY-ers!
I watched both the removal and installation videos and I now feel that I can absolutely do this myself. I honestly appreciate the fact that you leave in the parts where you have to refer to the manual. We all do. These videos are very well done and please keep them coming! You have a subscriber for life!
Great to hear!
A helper is always a plus!
Love how the video was for install and removal was presented in 2 separate videos.
Thanks Shannon! We just watched this and my husband and I installed it ourselves! Nobody even yelled! You are a lifesaver!
That is awesome!
I had just finished the install of my new microwave after watching this and it went so smooth without any cursing, lol. I also ran into the same issue where the hanging bracket would be halfway on the backsplash tile. I had to use a piece of 3/8" plywood to "build it out" as you say. Also, great tip on having to move the upper cabinet template out to compensate for the 3/8" being built out. That little tid bit of info right there probably saved me from having to make swiss cheese out of the cabinet and most likely cursing out loud. Thanks Shannon!
I curse just to give myself company.
hey Dave, I know this was 5 years ago lol, but I'm just about to do the same. Did you get longer lag bolts to allow for the thickness of the ply? My ply is 1/2" and the bolts are 2". Seems like using the originals would reduce the penetration of the stud significantly. TIA (if you can even remember!)
For a 40+ years DIY guy, I must say BRAVO!. An excellent description of the task and details for the novice installer. Thank you so much for your great video contribution to TH-cam community. Great Job and many thanks. Now it is time to look for your other videos. I am hooked. :-)
Thank you! Please subscribe!
Six years later and this is still the best video on the topic. Still 100% correct. Nothing has changed with how to install these vent/micro units.
I have had contractors tell me I need to run a dedicated line for my existing microwave, two of them so far, so this video saved me a lot of money - Thanks so much. There are hardly anymore honest contractors left these days, most want to rip you off.
It's electrical code for microwave to have a dedicated circuit, the plug he was using would be a dedicated plug so effectively the microwave is on a dedicated circuit, which is how we typically wire new houses. FYI, dedicated circuits in your house: fridge, microwave, dishwasher, kitchenette, stove, dryer, washer, furnace, water heater, sump pump, outside plugs (GFI's). Also, 1 circuit per two 20A kitchen countertop plugs. You should probably listen to contractors over assuming things from youtube clips.
Thank you so much! We opted to do it ourselves instead of paying $130 for installation. The unit showed up and we got pretty intimidated. Watching this video assuaged our fears and gave us the tips we needed to succeed. Y’all are awesome!!
When drilling the holes in the shelf, drill a small pilot hole and then drill the larger one from the top down. It keeps you from splintering the inside of the cabinet where it might be seen.
Your uninstall and now this install video were a HUGE help. The tile backsplash on my wall went halfway up the back of the microwave, so I had to drill right through the tile. I didn't have masonry bits, so I sacificed a few wood bits to the "honey-do-list" gods rather than making a trip to the hardware store. Worked out just fine in the end. Thank you again for the excellent how-to videos. I'm eating a plate of warmed up leftovers as I type, thanks to you. ;)
"At this point I may have to actually read the instructions". Classic. Thanks for reading them for me.😀
I honestly didn’t “learn” anything from this video but I watched it as a refresher before I installed a new one in our house (same microwave actually). Of all the videos I could have watched on the subject I searched to see if you had one first and as always, it was extremely helpful. Thanks!!!
Thank you for the video, just getting ready to replace my old on that’s and end of life and needed the confidence to know if I can DIY.
Thanks for your video!! My wife and I are newer homeowners. We have never replaced an over the stove microwave until now!! Great instruction 👍
Just installed one today in a house I'm flipping. Couldn't locate the studs so I installed 4 wall anchors with 2" lag screws, but my bracket was as big as the back of the microwave. Good video!!!
Yikes. I pity whoever purchased that house. When 60 pounds of microwave comes ripping through that wall.
... on second thought... the top anchors should do their job and hold most of the weight up. Let’s hope you didn’t cut corners with the cabinetry.
A great thorough and very clear instructional video. Watching this made installing our unit a breeze. Ready to install another one and watched again to refresh my memory. This actually made the installation a fun project. Thanks for all the great videos Shannon!
I really enjoyed that you had to read the instructions. Shows that you're human too! 😁 Great videos! Keep em coming.
Mitchell Bumgarner the
We
Any professional takes the time to read the manufacturers specifications. If you don't, you're not a professional.
It shows his high self-confidence either, otherwise he could re-edit the video and cut that footage. Although I can't even dream to have such a kitchen neither these appliances, but I enjoyed watching this video.
Appreciated that too! Thanks for not pausing and coming back later to me it seem perfect...
VERY clear instructions! Simple yet detailed. Everything you need and nothing you don’t. No excessive talking etc. Thank you.
Thanks for this video being a single female that now owns a home and have to things myself I want to thank you for this video. I love the way you gave the info step by step and explained why. I also like that you explained the other options that you may be faced with when it came to the venting of the microwave. That's the first place I got lost so since I came to you to see how to take the old one down. I came back to see how to put up the new one. Thanks again for being through with your instructions,
You still SINGLE?
Your videos were excellent, because of you I can get someone to help me remove and install a microwave over the range. I loved your details so now I know I’ll need to remove cabinet doors, a 1/4 inch x 30 inch plywood x 6 inches to meet the tile backsplash, a light drill, drill bit for hanging/screw, hole cutter for cord, spade bit to hang microwave from cabinet, screwdriver, stud finder, cardboard to slide microwave on countertop, scissors to cut templates and steps tool to get up and screw microwave into cabinet. I can do this with a strong helper. Ty
Thank you for the help. It had been several years since my last microwave remove/install. Watching you made the whole process so much easier. The old one is out, the new one is in. One person install just like you did.
Your videos are great ! Clear, concise, and to the point with no added nonsense. I am subscribing now !
Thanks for making this video. I've replaced lots of appliances, but never an overhead range microwave. Having a visual tutorial was reassuring before jumping into installation.
Great video! It has clear and userfriendly directions to follow. You did a great job explaining how to to this. By the way, I like to be able to see the unexpected things that we can run into while doing this kind of installation. Keep making these videos, so we can access to them and not be afraid to tackle projects like this.
Cannot thank you enough for this video and excellent information. The way you showed each step, the how and why helped me to install my microwave. The idea to use an extra piece of wood for the mounting bracket and how to mount the bracket got me past the biggest problem. Took me about 1 hour from taking out the old microwave to installing the new one. The other best part is saving $130.00 by installing it myself.
Thanks for the video. This is how you do a how-to video. You got straight to the point w/out unnecessary, excessive verbiage! Well done sir. And thankfully I watched it prior to ripping into the box and ruining the templates which I would have done without this information. Thumbs up!
Putting one in an old farmhouse. More of a visual learner than reader and you just save me a few hours of cussing and throwing tools. Glad you showed how to use the drywall screw because i have no idea where studs are due to plaster and lathe strips throwing the studfinder off. Awesome video thank you very much!!!
mike,having been a carpenter for lots of years now,i make a habit to use a finish nail 8 or 10 penny to double check stud location,even more so with lath plaster stuff,never really counted on stud finders
I have installed a few microwaves and always look for better and easier ways to do the job. Thanks for the very informative video. You do good work.
Thank you! Mine is on my last legs and I will be DIY-ing it this time. I trusted the cabinet installer to install my last one which never vented as well as I thought it should have. I'm now taking bets with myself that when I remove it, the blower won't have been turned to face the duct.
i feel stupid that I've had my new microwave oven sitting on the counter for at least a year while i procrastinated over the install. thank you for the video which makes the install seem absurdly simple (like reading the instruction manual I guess)
Watching you saved me from having to have someone do it for me. Saved me over $300. Thank you!
Awesome video. I watched this and your microwave removal video too, got the project done almost exclusively off these two videos alone. Simple, to the point. My microwave was the same brand as in this video so that made it all the more simple. Same bracket, same hardware, same templates.
Great video and that cut-out template are very accurate! I'm just glad I found both the wall studs! The next step, later on, is running the all-new exhaust from the cabinet to the attic through the roof!
Dude, this is the best how to install OTR microwave video ever!!!!
Excellent demo. Proves even pros need to read the instructions sometimes. Makes me feel a little better, lol!😂 His previous video on how to remove the microwave was also spot on. 2 people to help with the weight will be a great help. Some of the units are bulky and heavy.
First time homeowner and these videos are very helpful. It’s nice to watch before you get started.
Brilliant. We just bought this exact same Microwave from a scratch and dent store, installing it where there previously had not been a unit. The whole thing perplexed me. You helped me solve the template issues. Seriously AMAZING!!
Refused to read instructions so hard, he ignores the large embossing that says, "BLOWER SCREW'S!!!" 😝 (I do that too haha)
Thanks Shannon! Have been watching your channel for a few years. I'll be doing a microwave like that, fridge with water/ice maker, and putting a dishwasher in our new house very soon. It doesn't currently have a dishwasher so I found your electrical/plumbing video for dishwashers really handy. I appreciate your very detailed style and you're also Canadian which helps a lot with relevant code etc. Thanks!!
That is awesome!
Great tutorial. Very detailed, and made it a lot easier. Saved me $117 in installation fees.
Every time I start a new project I check if you have a video for it! First the shed and now this! Great videos!!!
Thank you
Just installed mine last night. I wish I had come across this video first. I removed pieces of my backsplash, and now I’ll have to repair it. The install came out pretty good though.
Absolutely outstanding tutorial. Thank you. Saved me $120!
You're welcome!
Wow searched 2 different how-to videos today and you delivered both times! Nice job thank you 🙏
A really informative video and easy to follow along. Thank you for including instructions regarding the butterfly bolts. That was exactly the instructions I needed.
My Dad and I need to install a microwave this weekend and I wanted to get an idea of how easy/difficult the installation process would be. This video has been extremely helpful and I have a feeling it'll come in handy for us when it comes time to put the microwave in. Thank you!
Look for the link to my video dealing with exterior venting a microwave. The link is in the video description of this video you watched.
The instructions was really clear and insightful. I have one to install at my home. Excellent video. Thanks
Old lady here - first time seeing Shannon. Love this video, and made me laugh when you couldn't find the screws at the first and ultimately said, "I'll take a look at the instructions." You are so cute, young man. I just fixed the door switch on a microwave via TH-cam vids and now have to hang it without templates. What's the worst that can happen? Haha
Perfect timing on this video. Getting ready to install one of these to replace the traditional range top vent in the new house.
You just provided a good installation process, plus the calm and relaxed voice allows us to properly following your steps.
Thanks. I had to stop the video and head back to the dumpster...
Ahahahaha
Lol
Jajajjaja
LOL
🤣🤣🤣
Appreciate you taking the time to explain the vent setup. The previous homeowner had an outside vent but it was vented inside. This is will really help out when we burn dinner. Thanks.
Thanks Shannon for taking time for make the videos you do! I am always pleased when your videos show up with whatever type of project I am looking to do. Your videos are well done and easy to follow. :)
Because of this video. I took out my van assembly and positioned it to blow out the front. I DID NOT HAVE A EXIT ventilation fan. Thank you so much for this bill deal. I hope this helps someone else. My microwave vents out the front.
I just wanted to say thanks for posting this video! I was able to put up my new microwave alone with my girlfriend thanks to your video!
Ur wellcome channel
Where was your man Charnell
Almost threw out the back wall template but after watching your video went out to trash container and recovered the back wall template. Also, had to read instructions to reposition the blower unit. Thanks for excellent review of installing microwave.
It's amazing that just about every manufacturer has the top mount screw holes in a different location. Even if you replace an old microwave with a new one from the same manufacturer, there is no guarantee the holes match. I can understand why one manufacturer doesn't want to use the same locations as a competitor uses ( gives you incentive to go with the same manufacturer when replacing the microwave in the future ) but can't for the life of me understand why one manufacturer would change the hole locations on their own product . That goes for the wall mount bracket too. They keep changing that around which makes even less sense, AND.....just to mess with you a little more, they keep changing the height of the microwaves so even if they use the same wall mount bracket, you have to relocate it, AND... if the new microwave is less in height and your tiles went flush against the old microwave, you now have a gap under the new microwave.
Keeps installers busy though
TheNYgolfer totally agree, now I just put up a regular range hood and buy countertop micros.
Keep in mind wherever there are screw holes on the top there has to be dead space inside to accommodate the screws. So depending on the internal mechanics, they may not have much option when it comes to location.
TRUTH! I'm replacing my Frigidaire with another today and I have to drill new holes for everything. That's after I cut fillers for the old holes :/
Thanks for this video, our 7/yo Samusung just shit the bed and this helped let me know how it was secured to the wall and cabinet! Saves us $140 for the install on something that is super easy to do.
We’ve got to install microwave ovens, custom kitchen delivery
I was specifically looking for this comment lolol
Dire Straits best line ever in song industrial disease..."Two men say they're Jesus one of them must be wrong"
Do you do color TV's?
I do appreciate the step by step install of the microwave, he made it easy and explained it very well. Put it up faster then I’d expected.
Thank you
0:19 “you get your unit out of its packaging “
My kind of show😂😂😂😂
Recently purchased my first home and got my hands dirty saving bucks getting it installed by the pros, been holding up and decided to thank you for the help!
Thank you we’re finally ready to install our microwave thanks for the tips I’m ready now lol
Great job and presentation. When I opened the box of my new microwave and read the instructions, I couldn't quite understand the instruction. So I searched for a vieo on how to install it and glad I found yours and played. But first I have to remove the current exhaust system on top of the stove. We had a counter microwave before and we had the exhaust above the stove. There was no microwave on above the stove before.
Be sure your micro wave is not to low to your cook top . 15" for electric ranges and 18" for gas stoves I believe.
HouseImprovements I’m glad I measured before I installed. I measured the top of the vent that is there and it’s 15” to the end of the cabinet. The height of the microwave I bought is 17” and the bottom of the microwave if installed is too close to the top of the gas range. I have to find a microwave that will fit. I’m also glad I did not yet remove the vent.
I put in over the range microwaves for my job, run into a lot of old cabinets with old wood or press board I usually use large washers up top to distribute the weight more also his particular cabinet had a flat bottom so the hole for the cord had to be new so the microwave sit's flat but I can usually use the old hole and stuff the remaining cord down into the cabinet
Thx for the non perfect install of the microwave unit. Every install is different and you never know whether it's simple install or a total rebuild. Thx again for this raw format, its more realistic than some of the other ones I've watched. Cheers!
The last kitchen cabinets I bought have those style hinges. I love them.
Maxid1 q wwee
No vents needed?
@@r.g.3120 He covers that in the first 2-3 minutes.
Thanks for all that I'm changing careers from a drain tech to an appliance installer thank you
I love the big sign imprinted in the metal that he missed that says in large letters "BLOWER SCREWS" with arrows. 😂. Still a great video.
Thank you, I was able to replace and reinstall my microwave with these instructions. Never knew microwaves were this complicated to install
Thanks, doing a similar installation and wanted to make sure I was headed in the right direction. Thank you
Your voice is so calming. Things like this are scary to me, your calm voice gives me confidence. Thanks! 😊
Just like my boss/teacher never read instructions till his stuck
Outstanding video. I really appreciate how you show the difficult challenges that someone might run into - like the framing where you want the vent, and the tile under half of the bracket. I wish I had watched this before I paid a "pro" to do it. He didn't turn the blower to the back (for wall venting) and he didn't check the existing cutout in the wall to be sure it was big enough (it wasn't). After watching this video, I fixed everything myself.
Thank you for making this!
Great Video!!!
Saved me $140.00 of installation at Best Buy.
Thank You Buddy
Thank you, Shannon! This was exactly my new replacement install. You covered everything that I needed to know with the same tiles, to needing some 3/8 plywood to having to drill a new hole. The only thing I did not have to do was the top vent. It did take me much longer though even with reading the instructions.
Glad it was helpful!
Great video, always enjoy them!
Thanks again. I tend to check for your vids before tackling any project. Kinda with I could go for a beer with you cause youre like my "go to buddy". LoL.
A beer sounds good! LOL.
Thx man i had the exact same issue of tiles I followed your steps and everything went well.
Thank you, I have installed several over the range microwaves and only thing I would had done differently is use a level (regardless of template) when drilling back wall mounting. Also a trick of mine is to place a wood surface such as a plywood board on top of the stove and then place two plastic boxes such as milk storage boxes or just storage boxes which will raise the microwave and make it easier for one person to mount. I watch most of your videos although I am a professional, just cause I enjoy them.
Thanks for the hints and comments Jerry
Dude! Thanks for this helpful video.
Fantastic job, very well explained! Thank you!
Appreciate the extra helpful tips-Thanks
Appreciate you taking the time helping out in making this video and not editing out the few seconds on figuring out how to take adjust the blower fan. Thank you helped out a lot
Thank you, very professional.
Larry Schindler.....probably the best how to video I have seen....now on to Home Depot to get my microwave replacement....thanks
Eh?, how you been my boy? Ive been missing your videos, Is it cold over your way?