EASILY Replace Ignition Coil On A Toro CCR 3650 Snowblower
ฝัง
- เผยแพร่เมื่อ 15 ก.ย. 2024
- In "Ronnie & The Challenger", Taryl goes over the lengthy steps involved in replacing the ignition coil on a Toro CCR 3650 snowblower. There's quite a bit of things to take off and put back on so Taryl will guide you through the job! Also he found an aftermarket coil for A LOT cheaper than the OEM one. So be on the lookout for that!
Prior to and after the fix, local scammer Ronnie shows up sporting a new job and ride - only to have his car repoed! Check out all the hilarious shenanigans here in another funny yet informative how-to video from your pals at Grass Rats Garage! And as Taryl says... There's Your Dinner!!
Special Thanks to Pat for letting us use his Challenger!
Subscribe Today! (Click the 'Subscribe' button on this channel!)
Be sure to 'Like' Taryl on Facebook!
/ tarylfixesall
And Follow him on Instagram! @tarylfixesall
/ tarylfixesall
Pick up YOUR Taryl Apparel Here! (Shipping Worldwide Daily)
www.TARYLFIXESA...
Get Your Parts From www.ProPartsDir... and Tell 'em "Taryl Sent Me!"
Grass Rats Garage Theme Music Available!!
Pick up a physical copy on CD from the Taryl Online Store:
tarylfixesall....
![[[OFFICIAL MV]] เอิ้นขวัญให้อ้าย- อ๊ะอาย สกุณาพร | ค่ายเพลงเป็นหนึ่ง](http://i.ytimg.com/vi/83x6L3X3qh0/mqdefault.jpg)
I don’t have a snowblower. Hell, I don’t even have snow! So, why am I watching this? Cause it’s Taryl. That’s why.
Funny I just replaced the coil on my Arien 2T snowblower yesterday ~ I’m also watching because it’s Taryl!
I don't have a snowblower, lawn mower, a yard or driveway. But I watch every vid.
Taryl, Thanks for the shoutout! Your video was great! We are so happy we could help you and many other with our product. Stay Rugged my friend!
3/4 the way into the teardown “ OH ya by the way before you do this check the kill switch wires “ 🤣😂
if you had to pay a shop to do this it would be cheaper to buy a new blower.
Well, did ya?
Ok,,,I finally did !!!
No extra parts !!!
And the freaking thing started on the first pull !!
Your the best !!!
Taryl's got so much knoledge and skills that it's just amazing and wonderfull.
Breaks and scatters engine...lol
Bricks and Scrapiron....
@@myronlaidler8034 breaks and Smashem
Single stage snowblowers remind me of working on vans. 10lbs of poop stuffed in a 5lb bag! 🦅🤙🏻🔧🇺🇸
The Master at work, Another great video. Thank you Taryl...
Thanks for the Dinner Taryl! I have to replace the starter rope on my Toro CCR 3650 and your video showed me how to get the pull start housing off. Time to get to work before it snows again!
The obsessive compulsive part of me says to lube up the chute worm gear assembly while it's apart.
I have a Red 2019 Challenger R/T blast to drive.... we all drive them like we stole them lol.
Just don't drive 'em like you wrapped your neck around a telephone pole.
@@ralphwatten2426 No that's what Camaro guys do it happened about 1 mile from my house.
@@robc8468 Yeh, those Chevys put out a lotta horsepower. Hard to control.
;-)
I love these videos. I almost never own or work on any of these machines but there's a certain peacefulness that come from watching small engine repaira like this. The skits are the most entertaining!
Just in case it snows in Florida. I will be ready. Merry Christmas.
😂
We should do a gofundme to get Taryl a lift table. My knees are screaming from watching him work on the floor.
I was just thinking that my knees are killing me
Taryl said he works on the floor for the purposes of filming. It’s easier for the camera guy to get the best shots.
With all the toys Taryl has kicking around, I think he’d have no trouble buying one for himself if he wanted one.
And a dental plan for him and JR
I've always thought the same thing. I sure Taryl could make a better than store bought lift table.
A full workout to replace that coil! My swear box would be full!
Thanks Tarryl! Excellent how to on this Toro. Its not hard to do, just a lot of stuff in the way.
I don't own a snow blower nor a sticker that says R*TEK but I'll watch the video anyway.
Thanks, Taryl. I appreciate the detail in the explanation. I also admire the "getter' done" speed in which you do this stuff.
I do a small amount of repair / maintenance work (perhaps $300 / 400 worth of stuff / month). A thing that I do because I'm OCD is I clean every single thing I can reach. Between that and my need to put anti-seize on everything this job would have taken me 1 1/2 - 2 hours. I use Mequiars surface cleaner. It's amazing on metal & plastic & is not excessively glossy like Armor All.
Mostly I do it because it drives me nuts not to. But my other excuse is that when the customer comes to pick it up I like the comments I get about how the thing looks amazing compared to what it looked like when it arrived. I also take before / after pics and put them on my website. It's been pretty common that the customer ends up giving me "a tip". On a few rides they dropped an extra $50 over the cost I was going to charge.
Love your videos. They help me a great deal . You're a great teacher.
As a profession service tech.i would never accept a tip ,I find it insulting. I am not a waiter
@@daddygc5814 Sounds like a plan for you. I'll do what I do. If, for some reason they believe my service was worth more than what I was charging then they must be fine with paying what they paid. I would never expect to be paid more than what I asked for.
25 miles south of my house is the Gulf of Mexico but I'm still watching Taryl fix a snow blower. I've never even seen a snow blower in real life.
Took my no spark 3650 apart re gapped coil and plug also made sure plug wired was fitting tight on plug. Got lucky it now sparks and runs good again. Bought the thing new 20-30 yrs ago and been an excellent machine. Last year I replaced carb with metal type which included filter and prime bulb (fleebay).
Yes, I love Ronny but he still owes me money. I really hope he someday gets on the straight and narrow.
Awesome tear-down DIY video, Taryl! Looks like the break-spring is missing or broke, as the paddle blades were free-spinning after handle-bar disengagement. Love working on these Toros!! Well done sir, well done!!!
That alien 👾 tentacle fingers sound, LMAO 🤣
THAT was too funny guys! How do you find the time?
Kyle, you are so GOOD brutha....
I wish everyday was sunday!!
Thanks uncle Taryl , I wish I had watched this before I worked on my Toro 3650 ,I finally got it all apart and back together and she is running good , but man , it's goofy the way they put that thing together, and I don't have tentacle spaghetti fingers, so I had to use imagination to get my boltys back in. {Magnetic pick up stick.} I dropped that one gas tank bolt so many times , I thought it was possessed.
Another great video. Never get tired of the background music.
Thanks Taryl and co. Whew, snowblowers are a pain in the butt!!!!!
Very doable ,. But looks like a pain in the ace !
Thanks for a good video.
I had one of these, glad I rolled it to the curb. My Toro 721R works great. This video makes me feel happy about using my curb!
Hey Taryl, you know that bolt you put in back to front? You're not supposed to do that... that'll make the engine blow up!
Only joking 😃
Relax Andy. It's not the space shuttle. :)
The successor--Power Clear 221 is worse. You need to take off the wheels to get to the bottom engine shroud bolt. Wondered why dealers were hesitant to replace the coil--found out the hard way. Needless to say, I left that bolt out when reassembling.
When you said eBay is my favorite store, I started laughing. That’s my favorite store too, and I buy all mine aftermarket parts from there either that or Amazon.
Hey taryl good morning what a great how to video on that coil some excellent tips my friend God bless you and your family p.s. flipin it all around town and there's all yours dinner
Joseph Tav...
*your dinnerS ♿ 🇺🇸
@@richardanderson5109 hey Rich good morning thanks for the little tid bit stay safe God bless
Taryl fixes all brilliant video👍
Enjoyed the video. Toro snow throwers are more difficult to work on than they could be. A little better engineering to make access easier would go a long way. Design engineers need to work on the shop floor and see the "fruits" of their labor.
Man that is a lot of screwing around to change the coil. Maybe if I watched another 10 times it would be easier. Thanks for the information and video.
You mentioned that a rusted flywheel does not affect engine spark. I questioned that, because my dad was a small engine wizard like you and that was the first thing he did was clean the flywheel when there was no spark. This may sound crazy, but I saw my dad in a dream last night. He told me that a badly rusted flywheel changes the coil air gap which does affect spark and you can readjust the gap or sand the flywheel. He said he sands it personal preference.
Ronnie J is awesome!
that's quite the puddle of dino juice in the carbatrator. if it was any deeper, you could go a fishin'. i guess briggs didn't think to put a chainsaw carb on it so it would run in any orientation, huh?
👍👍 we don’t get snow, but I watched anyway! 🤣
Watching this southern most part of texas(Brownsville). Dont have snow but i have watched every John Deere 345 for sure! Hey Taryl any more videos on that 345 coming? As always i always look forward to Sunday morning Barbacoa (breakfast in Brownsville) and the newest Taryl video on the big screen!
You did a good job Taryl thanks for sharing
Thanks for the challenger shots, great lesson taryl, watch out for the hot dogs no telling how long jergenstein has been hauling them around they could give you the 1/4 mile trots !
Joe Ortiz
What the hell was Ronnie saying at the end of the video, couldn't make it out ?!?!?!?(the last part) ♿ 🇺🇸
@@richardanderson5109 something about he had hot dogs ,ate 3 ,had 3 lefr for taryl then, it kinda bipped out im curious also, maybe it will be a Christmas gimme!
Little pain in the butt to putting that coil in thanks for the video
Looks like EZ Wurkz design on that gas tank bolt? Merry Christmas Grass Rats!
lol i still cant get over the fact the gas cap says fuel, might as well put a sticker on it saying "car"
Super good mechanic
wow, the best instructional video ever man. that's so needed. tyvm.
That was a lot of work just to change an ignition coil on a single cylinder equipment engine. Somewhere along the way we went from an Engineer based production to a bean counter accountant one. Equipment today is made to shoot down the assembly line as quick and cheap as possible, sorry about your luck if you have to repair it later.
Hopefully you can give me a tip. I put the ignition chip in my stihl 031 got rid of the points, saw runs good starts easy but will not rev past 5500 rpm .. brand new carb and intake boot replaced, cleaned everything new filters. Still no luck
Hey, free hot dog and all it costs you is some charcoal
I just thought I would say this at first I'm like he can't teach you any thing but I have learned so much from him I even bought taryl apparel and he threw in a sticker and a base ball card signed by uncle Andy I will buy from him again thanks taryl
Brilliant video thank you 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
$15 for coil $200 for labour.😳😂🤣
I doubt it was anywhere remotely close to $200
Very nice thank you
I'm glad I don't live where you got to have those
Great video Taryl 👋
Need to port that and put expansion chamber on to it 😊
I've got toro snow master 20 from the 80's, pretty much same. The cover removal here LOTS easier, my Tec is set up same as this briggs, as far as brackets, and carb {dont leave outside uncovered, rain gets in the carb thanks in part to that anodized plate} The tec exh is routed to the frame tube and out by the wheels, biggest improvement is the operation lever for paddles. On older unit drum/paddle turns as u turn over engine. Any Ariens customers? I need a ST524 operating cable replacemnt upfit
Dang..thats like taking the space shuddle apart..
Like a clown car, more parts than could possibly be inside.
6 pounds of crap in a 2 pound container..
Extremely detailed, well done video, thanks!!
Could you please put together a video of some of those special tools that the manufacturer makes for working on landscaping equipment they make it a pain to find without alot of pictures im not a dealer just a guy that likes having the right equipment for diagnosing and repairing my own equipment
I just did one myself same model ccr 3650
If been seeing you use that Milwaukee ratchet Taryl. How do you like it? How is the battery life for a 12v?
I remember working on the old Toro 2-cycle S-200’s with the Tecumseh engines. Very similar. Have to take everything apart just to get to the coil.
God I HATE those things. People offer to them to me all the time for free and I decline them. they're like a glorified snow shovel.
@@norge696 right?! Ughhh such a pain!!
When I was a kid, we had two S-200s and they were BARELY better than a snow shovel and when the snow was heavy it was basically ram it into the snow until it almost dies, back it up and then ram it into the snow again. Out of “nostalgia” I ended up getting an S-200 as an adult. Brings back memories, ha.
Taryl forgot to mention to take your time and use extra care when disassembling like he did.
Frank Gorshin lives!
Ronnie's rolling in that sweet sweet youtube ad revenue....straight ballin ...haha!!
Who's car?
Is that job worth it?
Hope you charged half
the value of the machine.
Always something to learn.
@28:55 Etrangleur: literal translation = strangler.
My battery operated drill on the flywheel nut and spend it over to check for spark
Always entertaining
Wonder if sanding the coil leads would of fixed the old coil. Either way it was probably due to be replaced as it seems the owner left it out in the rain most of the time. Great video. Thank you.
Your tip of sanding down the magnets on the flywheel made me think. if there is also rust on the old ignition coil contact near the flywheel magnets could that be the reason for a weak spark and also the reason that the snowblower would not start? My old ignition coil has lots of rust on the lower part where it picks up from the flywheel magnets. if I sand out that rust on the old ignition coil is it likely that the old coil would be fixed and would work?
Single stages are a pain in the butt. I’ve got 5 that I’m getting back into running condition right now.
How does Ferrel cope without your tentacle like 'spaghetti' fingers? The claws look like trouble!
Is it normal for the snowblowers to be blowing just a little bit of white smoke?
Is it possible to add an electric starter to one of these same exact models that don’t have an electric start on it?
Hey guys, I thought in a previous video you mentioned that there's no benefit to shining up the magnet on the flywheel? I always do
Didn’t say it was for greater induction, it was to insure clearance.
Bought a snow commander...Rope is frayed...ugh. hard job ??
A coil (and parts) for a Toro with that Suzuki 2 stroke engine are expensive also. But those old Suzuki 2 strokes seem to be very desirable. If EPA laws weren't so strict in the USA, these parts would be a lot cheaper. I don't think Suzuki even makes parts anymore cause they no longer supply 2 stroke engines. Same story for an old Wisconsin Robin (now Subaru) 2 stroke engine.
Hey Taryl, do you have a vid of doing the coil on a ccr2000? Have no spark
good job
Have this exact one and it blows a little bit of white smoke I think it’s normal though I don’t know
Would love to see a short block replacement on one of these...
Is that a 2 stroke Briggs & Scrapem
I have seen gear teeth repaired by drilling and tapping into the missing tooth location, inserting a short length of threaded rod, then filing to replicate the tooth shape. Loctite in place obviously.
prices for parts for these mower's are getting out of hand ... Hey Taryl Do you think if you tore apart a mower . an made a part list on what needs to be replaced every part .. i bet the sum come out more then what you paid for the mower
My newer 3650 died on me. I thought the gas was empty and filled it but it won't go. I have 2 of them and swapped around the plug(good) the carb (good) so thought it was the electrical. The machine was surging before it died. I tried continuity on the 2 switch terminals thinking I would get it in the ON position but I got continuity in the OFF position. I guess that is correct? based on your kill explanation? So is there a way to know if it is the coil? Can you take the plug out and see a spark if you spin the wheel?
Greetings from Poland!
What's the weather like in Poland? Happy you're here my friend..
@@dannylister558 The weather is bad. It blows, it rains and it blows.
I wish the snow would come back again.
NICE VIDEO
This is why I never liked those engines. They used a brass electric starter gear on an aluminum flywheel. Junk.
Yeah and the flywheels are no longer available now
??? i had something like 6snowblowers and they all had plastics gears that would break.
i only rarely used the electric start, but still.
@@Mikes360JTAGS Exactly. We don't touch them at the shop I work for. If the customer has to have an electric start, we talk them into a new unit.
@@pinomarino8917 I have been saving as many flywheels as I can. And pistons
@@Mikes360JTAGS The flywheels go for about $100 on eBay. They're gold.
Is it likely that this new part number ignition coil 801268 would work on a Toro CCR2450 snowblower? On Ebay there is a guy selling this new P/N as fitting the Toro CCR2450. The old ignition coil on my CCR2450 is 801108. I think that this new P/n coil can be used on both Toro snowblowers.
I live in Florida but I would put one of them Leave it to Beaver mower blades on that thing and make me a Bahaia killer out that snow slinger.
in alaska we just put it in 4wd. and damm right its The dactal ! ha ha ha
Thank you for the video
I have an rtec with a different coil any idea what I could use? Maybe it was an older model..
Is there a separate ignition module on this 3650 or is it part of the coil? Thanks for your video.