Had two of them, loooong story. Didn’t work for my city riding, but it’s a very cool bike. One of the best I’ve ever owned, and I had both gens. 👍🤪🏳️🌈
zh2 was on my look out but to be honest 200hp is way too much... I will have to defintely write my will up and kiss my loved ones good by every time with passion.... I will be happy with a mt-10 I love the naked look.... it was either this or a 05-07 YZF-R1 but those are way too sporty for me to want to hunch down like that. Subbed mate. Cheers from an Aussie Mechanic turned Truck/Trailer (cdl) driver.
Look into the Yamaha FZ1! I just picked up an 07. Its got the R1 engine configured differently for less HP (they dropped the compression ratio, making it insanely reliable and long lasting) and the rider triangle is more relaxed. It's a great option. About 145 HP, 76 ft-lb torque. You can pick a good one up for less than $5k
@@Sam-xt5gb Funny you mention that model, Found that to be very palatable too in my bike hunting. It looks like I have actually settled my focus on a 2023 MT-09 now. 3 cyl screamer :P Safe riding brother and thanks for the thoughts.
@brianmaclennan561 Wanna know what's 🤣? I ended up buying a 2023 Mt09 SP brand new with a Yoshi pipe and tail tidy and radiator guard. Going to run her in then change the oil and get her dyno tuned.
Another user already mentioned it, but here's my video on the process of installing. It's not my best video ever, but it's a brief overview. th-cam.com/video/ZzNDb7tTdR0/w-d-xo.htmlsi=97Qgn_9C3PX65t6x Thanks for watching! Ride safe.
Agreed! I wish Yamaha would release a new generation already, and the current gen has only been around for 2 years lol. Thanks for watching! Ride safe.
I mean, you've answered your question after asking it haha. If you (or anyone) cares about a bike being revved, then buy a new one. If you don't buy used, then what does it matter what someone else does with their possessions? Rev limiters are in place to prevent the engine from beyond what it's capable of. If Yamaha has the rev limiter set their, they must deem is being safe to rev it to that point. Obviously you don't want to sit on the limiter and hold for too long, but every now and again I think is just fine. I own my bike. I paid for the bike. I will rev my bike. I'll wheelie the bike. I'll use the whole bike. I'll push it out of an airplane if I so please lol. If something goes wrong, then I paid for it. That's why I will bang my rev limiter (and your mom) Not a bad question to ask. That's my take on it. Thank you for watching! Ride safe. 😎
![แฉกลโกงงานวัด 2024 [ โกงมั้ยครับ ep.106 ] | DOM](http://i.ytimg.com/vi/taC5dpP3HXA/mqdefault.jpg)
Love your content man, keep up the great work
Thank you so much for the kind words! I'll continue doing my best for you and everyone else watching. Ride safe. 😎
Had two of them, loooong story. Didn’t work for my city riding, but it’s a very cool bike. One of the best I’ve ever owned, and I had both gens. 👍🤪🏳️🌈
Torque monster!
Harrigaaa 🔥🔥
💯🔥🙏
Thanks for watching. Ride safe! 😎
Do you by any chance have a link to the company that sells those extenders for the passenger pegs?
zh2 was on my look out but to be honest 200hp is way too much... I will have to defintely write my will up and kiss my loved ones good by every time with passion.... I will be happy with a mt-10 I love the naked look.... it was either this or a 05-07 YZF-R1 but those are way too sporty for me to want to hunch down like that. Subbed mate. Cheers from an Aussie Mechanic turned Truck/Trailer (cdl) driver.
Look into the Yamaha FZ1! I just picked up an 07. Its got the R1 engine configured differently for less HP (they dropped the compression ratio, making it insanely reliable and long lasting) and the rider triangle is more relaxed. It's a great option. About 145 HP, 76 ft-lb torque. You can pick a good one up for less than $5k
@@Sam-xt5gb Funny you mention that model, Found that to be very palatable too in my bike hunting. It looks like I have actually settled my focus on a 2023 MT-09 now. 3 cyl screamer :P Safe riding brother and thanks for the thoughts.
Check out the MT-09
@brianmaclennan561 Wanna know what's 🤣? I ended up buying a 2023 Mt09 SP brand new with a Yoshi pipe and tail tidy and radiator guard. Going to run her in then change the oil and get her dyno tuned.
If I may ask how much does the bike cost approximately for the mt 10 or the mt 07 or something similar to the yamahas great video and thanks
The MT10 is $14,799 MSRP for the 2025 model in USA. The 2025 MT-07 is $8,599.
Thanks for watching! Ride safe. 😎
Link to your dash front and rear cams set up? Very small very cool
Vantrue falcon 1
Another user already mentioned it, but here's my video on the process of installing. It's not my best video ever, but it's a brief overview. th-cam.com/video/ZzNDb7tTdR0/w-d-xo.htmlsi=97Qgn_9C3PX65t6x
Thanks for watching! Ride safe.
So, how tall are you? Had a Kawasaki Z900 and the large Puig windscreen still allowed wind mid-helmet (I’m 6’2”).
6'1 is my height. The wind still hits the top of my helmet, but it's greatly reduced buffeting overall.
Thanks for watching. Ride safe. 😎
this Look of the mt10 is my personal best.... new ones look kinda weird....
this one looks like an Autobot....
Agreed! I wish Yamaha would release a new generation already, and the current gen has only been around for 2 years lol.
Thanks for watching! Ride safe.
Why bang the Rev limiter? That's why I don't buy used.
I mean, you've answered your question after asking it haha. If you (or anyone) cares about a bike being revved, then buy a new one. If you don't buy used, then what does it matter what someone else does with their possessions? Rev limiters are in place to prevent the engine from beyond what it's capable of. If Yamaha has the rev limiter set their, they must deem is being safe to rev it to that point. Obviously you don't want to sit on the limiter and hold for too long, but every now and again I think is just fine.
I own my bike. I paid for the bike. I will rev my bike. I'll wheelie the bike. I'll use the whole bike. I'll push it out of an airplane if I so please lol. If something goes wrong, then I paid for it. That's why I will bang my rev limiter (and your mom)
Not a bad question to ask. That's my take on it. Thank you for watching! Ride safe. 😎
It was fz 10 b4 mt 10 an that bike bin out since mid to late 2000s just sayin
Fz10 came out in 2016... you may be thinking of the fz1??
@@thehomeless_trucker This is my guess. Thanks for politely educating him. Ride safe!
Empty 10, 😂
Always ⛽
Thanks for watching! Ride safe. 😎
Nice video nice comment also nice burb also😅
Nice words nice comments nice emoji
Thanks for watching! Ride safe. 😎