ฝัง
- เผยแพร่เมื่อ 6 ม.ค. 2022
- Chevy camaro a/c compressor is working but wasnt able blow out cold air. The a/c system has good pressure on both H/L sides. The a/c evaporative temp sensor is bad. Code B3933. Part located on the passenger side, next to blower motor.
Like comment share and subscribe for more videos. Thank You. - ยานยนต์และพาหนะ
Bro, I’ve had this problem for months! And I live in Arizona 🌞 life saver.. thanks!
Bro, no one is your bro
@@America1st69 🤡
@@America1st69he’s my bro
Wow thank you so much for this video!!! Worked immediately after switching the sensor, really appreciate you!!!
What part did u buy!
good 😃😃
Got my whip, ac turned to blow cold af, nothin but stale warm air. Did some micro troubleshootin I jumped the contact points from the relay K617, the clutch compressor engages and blows cold air. But it does not engage with the cabin A/C controls. I swapped the relay used for the headlights that works fine and still no juice. Thoughts of the potential problem?
Have same problem here replaced every relay n fuse possible it only even put a new compressor if I jump it blows cold air other wise clutch doesn't engage.....did you find a fix?
Mine is doing the same, did you ever figure this out. thanks Dean
@@gustavosanchez8158have the same problem, any ideas?
@@alessandro_n5514 have not fixed it yet i have coming a set of new knobs maybe its the controlers ill update when replaced.
@@gustavosanchez8158 found my problem, the ac refrigerant pressure sensor was loose, plug it correctly and the ac started to blow cold air
what part did you buy?
Hello thanks for the video my problem with the air conditioner is that when it's hot outside the air comes out hot and when it's cold it come out cold what you did would help me with the problem
You may have a blend door issue with your Chevy Camaro, they have videos on TH-cam on how to fix it yourself, if you go to the dealership it’s about 2,500-3,000 for them to fix it, and the part is like $20
Probably not blend door. The AC thermal expansion valves go bad in these cars.
Can I just replace the sensor without clearing the codes on a hvac? I ordered the part but I don’t have that machine that reads the codes
You can go to autozone or oreilys and have them clear it.
Wat if u car isn't showing code but no cold air tried to recharge nothing still heat
I have this issue with my 2012, but also same thing with heat. The heat will come out when idle but not so much when moving. Will this fix both temps?
Either your heater core is partially clogged or bad blend door motor for the "hot and cold side" it could be intermittent.
what was the device you were using to find out what was wrong?
Code reader scanner
My Camaro ac condenser keeps freezing over. Maybe this will fix it as the compressor works and ac blows ice cold.
I just got my blend door replaced on my 2012 about a week ago, I get cold air from all vents now but there are times when it’s not blowing cold will this help thanks in advance?
You might want to check the blend door again if its aftermarket part, sometime it could be defective. Could be a/c compressor is going bad. Im not sure if this will guarantee fix your problem but you can try, its a quick easy fix.
Your thermal expansion valve is probably sticking. You probably need to replace that.
Same problem on my 2012 SS but replacing the Sensor didn’t work 😢
I had my friend charge it up but it didn’t need any Freon. Blend door replaced because it was broken and had that cold/issue but now with new blend door the ac won’t get cold. I hear compressor come on and off.
Stuck now. Mechanic said I need to replace the whole AC unit for 3k… of course they would say that lol
Hey bro, my Camaro hums from what seems right behind the radio from inside the car, it hums when I turn the ac on, why could it be humming?? It’s very annoying
Hi , my ac blower malfunctions , it blows for 1 minute and then stops . Could it be that rat must have bit some sensor cos I found rats in my engine due to king time parking … or could it be damaged blower … please advise thanks
Lastly what’s the name of your obd scanner machine and where can I find one .. does it read all cars and codes
You can buy the obd code reader in any autozone or oreilys stores. If the rat chew any parts of the electrical wires, it will cause intermittent to the component. It will make the car act weird or any parts of the car is not working properly. Best advice is take to to a mechanic shop to have it check out.
Sound like the pressure switch
Hello was the compressor kicking on before the repair?
Compressor clutch was not kicking because of the ac code. System have no leak and freon full.
I got my 2014 camaro bowing ice cold on driver side vents but passenger side vents are blowing hot, got with bunch of mechanics but havent got an answer, what could be the issue?
Either the blend door motor is bad or the blend door in the middle of the dash is broken, this is a common problem. The blend door part is $35 and the labor around 11 hours for the blend door, the dashboard has to be remove. Total around $1,500.
@ah duuu My '14 blows warmish air when the A/C is on full but everything checks out fine - could it be the blend door? The heat is warmish when on full too. Thanks
The middle blend door is broken VERY COMMON PROBLEM. Part cost $30. Labor is 11 hours removing dashboard. If you do it at the dealership, cost around $2,500 to $3,000. If you do back yard mechanic, the cheap way is to cut a hole in the hvac box. Search it up on TH-cam.
@@Ah_Duuu_Ma Ok thanks. Is there any way to know for sure what the problem is by hooking up a scan code reader?
@@Ah_Duuu_Ma Ok thanks. Is there any way to know for sure what the problem is by hooking up a scan code reader?
@@pmxevious Yes if you have a good scanner, it read codes, live datas and testing parts. If you know how to use it.
He got you need to speak up I could not even hear what you were saying over the crinkling of the bag
My car only blows cold air when is at idle, but when in at 40Mph+ speed it will only blows cold air randomly, all the freon levels look fine,I don’t know if it may be the compressor clutch
Any idea, a/c wasn’t working at all b/c it had a leak at first when I bought the car, after replacing the seal rings and filling it with freon, that’s when I notice the problem
@@rpdfix6056 Replace the ac temp sensor first, easy cheap fix. Make sure freons is completely fill up to the correct amount. Pull the fuse or relay for the compressor see if it it would reset itself. If it doesn't, then most likely is your ac compressor is going bad slowly.
@@Ah_Duuu_Ma Sounds like that is the problem, thanks for the advice
The AC thermal Expansion Valve is notorious for going bad on a lot of cars. In some cars, it's really hard to get to. On the 2010 and up Camaros, it's not too hard to get to, but of course you will need to replace the desiccant pack, then vacuum and recharge the system after replacing the thermal expansion valve.
My 2012 camero ac not working neither but it won’t take the Freon what do you think it can be
If theres too much air or oil trap in side the a/c system, you can't charge the a/c system.
If you see very high pressure on the high side gauge and very low pressure on the low side, theres a freon blockage. Check the expansion valve (if bad you have to replace it). Check if the a/c system have leak, if theres a leak, can't charge the a/c. Check the compressor clutch, if the clutch doesn't kick in, theres no a/c.
It won't take freon because the clutch is not engaging
Will this fit camaro 2013 v6
Check your car, if it look the same and same location, then yes.
Will the part fit a 2011 chevrolet Camero LS??
Should be.
Having this same issue on my 2012 camao ls too
I was sitting in my Camaro at idle for about 15 minutes this morning and all of a sudden my ac stopped blowing hard. It only blows a tiny bit. Anybody know what I should check or do ?
Check the blower motor and the blower resistor. Most likely is the blower resistor is bad. The resistor controls the speed of the blower motor.
I know my Camaro doesn't blow cold air when it's sitting still idling it likes to be moving it it makes the air come out colder when it's moving when you have it in drive and you're not sitting in one place
So on my car it’s blowing heat when it’s turned to cold could it be that too
Replace the blend door actuator for the hot cold side. The blend door motor is going malfunction, that's why its not working properly when you commanding it.
@@Ah_Duuu_Ma turns out it was warm I went and done a recharge and it started getting cool 🥶
Great video but if you could show show the exact area in detail. That would help tremendously.
Yes i did you the exact area of where the part ive put in. Location is on the passenger side, next to the blower motor.
@@Ah_Duuu_Ma you did not show the location
@@EliteSports27 passenger side, next you blower motor.
do you have to remove the glove box?
@@bhays71 No need. Right where your foot is on the left.
Did the car have a check engine light for this?
No check engine light code. Only hvac code.
Yo tengo problemas ygual pero el mío sale mital frió y la otra mital calor ayudas con eso
Se te esta acabando el frion. El mio paso igual luego termino saliendo caliente en los dos. Tenia un leak
My friend, I have a problem with the air conditioner. When it is running, the engine temperature rises to 105
That’s normal. Im not exactly sure what you trying to ask.
It would help if yu had the link for the part in your caption
I bought the part at the dealership. Part # is in the video.
@@Ah_Duuu_Ma hard to see it at the angle you held the bag
Why did you put the new sensor in with the made in UK sticker still on it ?
The part # was on the sticker I didn't want to remove it for the next person, if it goes bad again. As long as it doesn't cover the tip of the sensor.
Where is the sensor located?
Passenger side. Where your legs are.
I rewinded the video twice and still didn't hear. 😂 Now I have to find the blower motor in my manual
Was the heat working?
Yes heat working.
Autozone read the code then when they get it to the computer it doesn’t show the code
What's the code?
Where is your shop i want to bring in my car
Shop is in San Jose CA.
My ac clutch doesn’t want to spin?
Check the fuse or relay for the ac compressor, make sure its enough freon in the system for the compressor to kick.
I have a issue it’ runs hot driver side and passenger cold why is that.
Your blend door motor is bad, it stop working. It's a VERY COMMON PROBLEM on a Camaro. The blend door part cost $40, if you do it the right way, the labor will be 11 hours to remove the whole dash. If you do the wrong way but get to the part faster in 1 hour labor. You have to cut a hole on the hvac box to get it.
Does this work for heating
This work for the A/C only.
@@Ah_Duuu_Ma update heater is fixed . Jus had to tap the sides where blend door is . Started working again .
@@dreadheadmikey610 To replace a bad blend door motor is really hard to do on Camaro.
can I use regular obdII reader to read/clear the code?
Yes.
How much is this part and where can i find it ?
Call chevy dealership for the part. I showed the part # in the video.
O’reilly 18$
Hello bud working on a 2012 camaro charged a/c and still blowing hot air HELP thanks
Check the ac compressor, make sure the compressor works, if leak, it won't be cold. Check blend door motor, see if it work properly.
I cannot find it anywhere
Can't find the part or the location of it.
First thing you need to do is check the ac compressor. If its bad ot not spinning that where the problem is. 🤷🏻♂️🤷🏻♂️🤷🏻♂️🤷🏻♂️
I got my 2014 camaro bowing ice cold on driver side vents but passenger side vents are blowing hot, got with bunch of mechanics but havent got an answer, what could be the issue?
You have a blend door issue. Either watch a video and cut it out yourself or just pay alot of money at the dealership and have them put a new one in. Dealership will cost alot of money tho