2:16 Step 1- Make available these 2 measurement (Underbust line and round underbust). 2:51 Step 2 -To align shoulder line together and draw neck styline. 4:25 Step 3 -Locate underbust line. 5:21 Step 4 - Use bust radius to cross check front neck depth. 7:18 Step 5 - Cut out the neck styline. 8:21 Step 6 - Transfer side dart to styline. 9:51 Step 7 - To do underbust tightening. 12:58 Step 8 - Contour at the styline. 14:56 Step 9 - Check for alignment of pattern and check for effects of contouring. 15:47 Step 10 - If any shortage or effects, fill up or replace.
Thank you ma...My confusion here is that are you really saying that whatever figure you used to contour the underbust you will minus 0.5inche and then use the remaining figure to contour the style line?
Well explanatory tutorial, thanx a million,but pls what if we are drafting shoulder seem, are we still going to remove that 1.25 dart from the shoulder, if yes how are we going to replace it ma.plsssss answers me
Thanks for commenting. Yes you will still do. And it will be replaced towards the side( armhole)if not the front shoulder will be smaller than that of the back and you wouldn't be able to join
Always on point. You make pattern drafting so easy and for that I thank you. My question is, how do I know how many inches to remove from the neck to prevent gapping. How do I know if it will gapp. Thanks Ma'am 😊
Thank you madam for commenting. Garment will gape when neck too low & bust very full. Inches depend on fullness of bust which reflects in the difference between front length and back length. Watch my video on Armhole princess bustiers or join my paid class on contouring. Thanks one again.
I am so inspired that I went through the video like thrice. However I have some concerns. You said contouring at the armhole wouldn't affect anything. Now I am worried that the 1.25 inches removed will reduce the armhole circumference. Can I get some assurance that this won't affect the fitting meaning couldn't it be too tight. Thank you.
That 1.25 is an excess( gapping) so since we have seam along that path( armhole) it gave us opportunity to take it out by cutting it off. Which gives the perfect bustier fit.
When we use basic bodice to sew, we achieve a perfect fit, but then, there are still some excesses at some segments, like the armhole, under bust. But because there are no seams there, we leave them at that. But doing bustiers /contouring, we take them out.
Thanks, For more information about our online classes chat me up on this number : 08083718473, we are located at Block 52, flat 1, Abesan housing estate ipaja, Lagos.
God bless you,am a beginner,I love your tutorials,more grace.
Thanks for commenting. You are highly welcomed 🥰
That cross checking of neck depth using burst radius 😎😎 Thank you so much ma...I learnt sth new today
Thank you so much for this knowledge. It has improved my sewing.
Thank God for the privilege to share knowledge
2:16 Step 1- Make available these 2 measurement (Underbust line and round underbust).
2:51 Step 2 -To align shoulder line together and draw neck styline.
4:25 Step 3 -Locate underbust line.
5:21 Step 4 - Use bust radius to cross check front neck depth.
7:18 Step 5 - Cut out the neck styline.
8:21 Step 6 - Transfer side dart to styline.
9:51 Step 7 - To do underbust tightening.
12:58 Step 8 - Contour at the styline.
14:56 Step 9 - Check for alignment of pattern and check for effects of contouring.
15:47 Step 10 - If any shortage or effects, fill up or replace.
Wow! 👏👏👏Great to see this.
You are very much on point. 👌
Your are representing Wella. I should hire you as co- fashion tutor😁😁😁
@@laperycollegeoffashion8737 Hahahaha
I just love the fact that I am learning Ma
I love all your videos so much! Your drafting process very clear, no waffling great video. Thanks
Thank you madam. I appreciates your comment
You are the best madam,God bless you richly ma
Nice work. You are a good teacher.keep it up.
U are wonderful. Thanks
You are welcome 🥰
thank you so much
Thank you precisely what was needed.
Good to hear and thanks for commenting
Waoh!! This is great . love you a million times over. Thank you so much Lapery
Finally you have the video. Thanks for the love
U are the best ma,,thanks a lot
Thank you 🥰
Sure God will make provisions available to enrol in paid Classes 🥰
You never disappoint. A big thanks. I would love to see a tutorial on grainline from you, pleaseeee
Thanks Sis. Sure coming up Sis.
@@laperycollegeoffashion8737 alright. Patiently waiting. Thanks
Fabric grain video now available.
Thanks Ma,God bless..am eagerly waiting for your trouser pattern please Ma
Kindly be patient. Coming soon. Thanks
Incredible 👏🏽👏🏽👏🏽. Thank you .
Thank you
What if you don't have a side dart? Do you then adjust the gapping by widening the front dart from apex to
Waist?
Thank you so very much madam. Be blessed
Amen.
Thanks so much ma.
Thank you ma...My confusion here is that are you really saying that whatever figure you used to contour the underbust you will minus 0.5inche and then use the remaining figure to contour the style line?
Thanks
Well explanatory tutorial, thanx a million,but pls what if we are drafting shoulder seem, are we still going to remove that 1.25 dart from the shoulder, if yes how are we going to replace it ma.plsssss answers me
Thanks for commenting.
Yes you will still do. And it will be replaced towards the side( armhole)if not the front shoulder will be smaller than that of the back and you wouldn't be able to join
Always on point. You make pattern drafting so easy and for that I thank you. My question is, how do I know how many inches to remove from the neck to prevent gapping. How do I know if it will gapp. Thanks Ma'am 😊
Thank you madam for commenting. Garment will gape when neck too low & bust very full. Inches depend on fullness of bust which reflects in the difference between front length and back length. Watch my video on Armhole princess bustiers or join my paid class on contouring. Thanks one again.
Thank you
May you please do a tutorial of aJacket with collar
Noted ma. Thanks for commenting
Do you add seam allowances after contouring pattern?
Yes. The basic bodice pattern is drafted without seam allowances. After you are done drafting, you then place on fabric and add seam allowances.
@@laperycollegeoffashion8737 Thank you so much
👍
Thank you 🥰
I am so inspired that I went through the video like thrice.
However I have some concerns. You said contouring at the armhole wouldn't affect anything. Now I am worried that the 1.25 inches removed will reduce the armhole circumference. Can I get some assurance that this won't affect the fitting meaning couldn't it be too tight.
Thank you.
That 1.25 is an excess( gapping) so since we have seam along that path( armhole) it gave us opportunity to take it out by cutting it off. Which gives the perfect bustier fit.
When we use basic bodice to sew, we achieve a perfect fit, but then, there are still some excesses at some segments, like the armhole, under bust. But because there are no seams there, we leave them at that. But doing bustiers /contouring, we take them out.
That was why I did the gapping and contouring video first before the steps/ guidelines.
Enrol for the paid class for more insight.
Thank you
How do I get Lapery guidelines chart for blouse and skirt?
Do you mean the drafting tables?
@@laperycollegeoffashion8737 yes and how when is your online classes starting? Where are you located?
Thanks, For more information about our online classes chat me up on this number : 08083718473, we are located at Block 52, flat 1, Abesan housing estate ipaja, Lagos.
Ft