MANNNNN!!! You just changed my life again!!! I replaced the strip, followed your instructions and this thing is cutting like butter. No sticking or anything. It damn near wants to fall during the weeding process. You're the real MVP brother 💪🏾
Thank you for the tutorial video. I really appreciate tinters like you that take the time to show their expertise. It helps more than you realize. Thanks again.
Holy crap these graphtech are insanely high tech. I just bought an SC2 from US cutters like 3 months ago but the cuts never lined up. That’s what you get when you buy a cheap plotter. The fact that these tell you when you’re close to the perfect blade depth is crazy. It seems a bit more complicated that’s for sure but I’m super happy to have a quality plotter now. I bought the ce7000-60 as I tint rvs and most of my films are 24 inch rolls. For bigger rv windows I’ll just hand cut them still. Would love to get into vinyl decals for RVs and jeeps. And I’m a full time RVer at Rv resorts daily and RVers love to personalize their rigs with vinyl stickers. This is why I went with an upgrade and super stoked to learn how to do it. If I can only find a course to teach me. Anyone have a recommendation on how to learn? Thanks in advance.
try to think about how to cut the glass film material for the rear glass or windshield in a convex plane like that and use the plotter without cutting manually?😊
hey Sean hope all is good!! where did you get your graphtec plotter? and which type of blades do you recommend for PPF I'm looking around for the plotter
when I do the cut test on the right side of my vinyl it cuts perfect but when I do it on the left side it cuts the triangle and 3 sides of the square but not the 4th side. Help!!!!
Helped a lot! Thanks dude! Do you mind making a video of how you cut your back window tints on TruCut? I’m having issues because when I go to cut, it doesn’t cut out one full piece. Instead my Graphtec cuts 75% of the window on the one piece and for some reason doesn’t finish that piece and cut the other 25% of the window on new tint it rolls out. Tried to find the fix but it’s costing me lots of material haha. Thanks again man!
can anyone tell me why i cant perform a blade check i can click the down arrow and the number 4 option is there but it doesnt have the black square around it like the rest of the numbers and when i click 4 it just beeps and does nothing
How come everytime when I start to shrink a back window I will get over half way through and it will be perfect until the bitter end and that's where all my wrinkles and bs starts to go on and happen u talking about keeping someone frustrated because I've gotta get the back windows down or what's the point in calling ur self a window tinter fr fr because I am self tough for one then my buddy used to work.on a shop and they gave him one of those instructions videos about how it shows u to lay it on the outside of the window and make all of ur up and down cuts first everytime then roll the bottom up and roll ur window down around a 1in from the bottom of ur track seal and then make ur final cut then began to apply but wtf is the deal with these windows that I'm guessing they turned on there rear defroster and its put these big like 3 or 4 in bubbles all over there back window and is there a way to keep that from happening to ur tint job or do u all just disconnect there rear defroster one huh ?? U said to ask so I'm asking ya because I dont rely on no one no time because I've found out that ppl.are full of there self's and full of shit on top of things fr fr and u can't depend on no one but u to make sure that everyone stays on that profession track base because a happy installer makes for better days and a stress free environment fr fr feel me if u have any home life problems leave those at the threshold and pick up ur drama on ur way home dont bring it to work with ya because all it takes is one sour puss to ruin a entire day fr fr seen it go on alot fr fr but not me because I'm there to do a job and make some easy $$ and I am one of them guys if u can't get things lined out between u and whom ever then it's time to take the both of u all out side and just let them swing it out till the problem goes away I kno this sound a little harsh but I never said I wasnt a reasonable man tho feel me because if its disrupting the work area then that's unexpectical to me and especially now that I got me a plotter and I want to.go out on my own because I'm tired of all the cry babys that always seems to. Have something to whine about fr fr because if they do it it.seems like it's perfectly fine but let me say anything then it all of a sudden becomes a problem naw I'm good fr fr what these companies doesn't understand is they apparently can't do what they would normally be paying ppl to do or they would trust me seen that bs line of excuses to many times kinda like someone owning a garage but never fixed a car in there lives fr fr so all ur doing is making them rich and ur still pour fr fr ahhhhhh naw lol unless this is ur personal shop idk why u dont take some of ur money and start to invest into some machines for u a shop so u eliminate all ur over head and begin to start sticking that into ur pockets instead of someone else's pockets because you are doing all the work but them and that company name is the ones who gaining all the clients not u ur more or less a used flunky is what I like to call anyone that's being used for there skill sets because u kno what ur capable of not the clients fr and idc if u was to charge 10$ less then who ur working for u will take all there business because ppl is about that almighty dollar fr lol th-cam.com/video/b75Fz8CqAW4/w-d-xo.html and my name is shawn not Steve steve jobs has something to do with apple it's not me I just like staying in condo lol
I Downloaded ComputerCut pro. Im having issues when i print, it only cuts a section if the window. Ive tried moving tje image to the center of the film yet it keeps cutting just a section. Any idea.
![What You Need To Open A Tint Shop [ PLUS How Much It Costs ]](/img/n.gif)
MANNNNN!!! You just changed my life again!!! I replaced the strip, followed your instructions and this thing is cutting like butter. No sticking or anything. It damn near wants to fall during the weeding process. You're the real MVP brother 💪🏾
Amazing. Thank you 🙏
Thank you for the tutorial video. I really appreciate tinters like you that take the time to show their expertise. It helps more than you realize. Thanks again.
You explain things well, please make more graphtec videos!
Thank you man, Great vid. I just got my CE7000 and this is the ONLY vid I can find with this info
How is it going with the ce-7000? Thanks
Holy crap these graphtech are insanely high tech. I just bought an SC2 from US cutters like 3 months ago but the cuts never lined up. That’s what you get when you buy a cheap plotter. The fact that these tell you when you’re close to the perfect blade depth is crazy.
It seems a bit more complicated that’s for sure but I’m super happy to have a quality plotter now. I bought the ce7000-60 as I tint rvs and most of my films are 24 inch rolls. For bigger rv windows I’ll just hand cut them still.
Would love to get into vinyl decals for RVs and jeeps. And I’m a full time RVer at Rv resorts daily and RVers love to personalize their rigs with vinyl stickers. This is why I went with an upgrade and super stoked to learn how to do it. If I can only find a course to teach me. Anyone have a recommendation on how to learn? Thanks in advance.
This is what I needed!!!! Thank you 😭
Huge help! Great video very thorough. Keep up the great work! 💪
Thank you!!!! Do live sometimes, so I can send stars.
My Man, thank you so much! This is the video I was looking for
Verry Helpful. Thank you
Huge help! Saved me ALOT of time, you rock!
Helped alot with my Graphtec FC9000 thank you.
Perfect, I'm about to buy a new graphtec plotter 👍
This is a great video! Much appreciated. 🙏🙏🙏
didnt know that tab needed to catch the blade holder. Was going crazy trying to figure out why it wouldnt cut. lol
try to think about how to cut the glass film material for the rear glass or windshield in a convex plane like that and use the plotter without cutting manually?😊
Thank you so much! What a life saver !
Great video dude.
Please help idk why I can't set my Graphtec target length to 2mil it maxes at 1.00mm. thank you for any tips 🙏
My tint keeps moving when the plotter is cutting and messes up the tint. Any suggestions?
Thanks man, that was alot of help
Awesome video
hey Sean hope all is good!! where did you get your graphtec plotter? and which type of blades do you recommend for PPF I'm looking around for the plotter
Thanks for the video bro
Great man, i needed that info as i struggle sometime with the plotter
Tkx for the vídeo 🙏🏼🤟🏼
God bless
Great video
Thanks , from AZERBAIJAN
nice job!
Thank you for this Video! Very nice... What for a Software do you use to precut the Tint?
Hey could you do a video on tinting a 7 series BMW? The rear windows have a 2inch divet thats just hard to reach with any card to squeegee out. Thanks
Absolutely.
I agree they are a bit challenging
What is the website for the plotter
how do you cut the flas film for the rear and front glass using the ploter, can you cut it manually and get maximum precision?
What’s degrees is recommended on the blade for tint?
What size plotter would you recommend. Does the software for window patterns come with product?
Very nice video
Can i use a 24 inch plotter to just do sides windows it will work good?
when I do the cut test on the right side of my vinyl it cuts perfect but when I do it on the left side it cuts the triangle and 3 sides of the square but not the 4th side. Help!!!!
What should the offset be set to?
What model plotter you using and software will appreciate feedback, thanks!!
Hello boss I am from Ghana and pls I am into car tinting and car wrapping pls if I won't some of ur caramic tint can u help me pls
Muy buenos videos amigo
Helped a lot! Thanks dude!
Do you mind making a video of how you cut your back window tints on TruCut? I’m having issues because when I go to cut, it doesn’t cut out one full piece. Instead my Graphtec cuts 75% of the window on the one piece and for some reason doesn’t finish that piece and cut the other 25% of the window on new tint it rolls out. Tried to find the fix but it’s costing me lots of material haha. Thanks again man!
what plotter and program do you all use?
It wont let me click blade adjust for some reason
can anyone tell me why i cant perform a blade check i can click the down arrow and the number 4 option is there but it doesnt have the black square around it like the rest of the numbers and when i click 4 it just beeps and does nothing
Did you ever figure this out I have the same problem
Hey, What software do you use for templates?
How come everytime when I start to shrink a back window I will get over half way through and it will be perfect until the bitter end and that's where all my wrinkles and bs starts to go on and happen u talking about keeping someone frustrated because I've gotta get the back windows down or what's the point in calling ur self a window tinter fr fr because I am self tough for one then my buddy used to work.on a shop and they gave him one of those instructions videos about how it shows u to lay it on the outside of the window and make all of ur up and down cuts first everytime then roll the bottom up and roll ur window down around a 1in from the bottom of ur track seal and then make ur final cut then began to apply but wtf is the deal with these windows that I'm guessing they turned on there rear defroster and its put these big like 3 or 4 in bubbles all over there back window and is there a way to keep that from happening to ur tint job or do u all just disconnect there rear defroster one huh ?? U said to ask so I'm asking ya because I dont rely on no one no time because I've found out that ppl.are full of there self's and full of shit on top of things fr fr and u can't depend on no one but u to make sure that everyone stays on that profession track base because a happy installer makes for better days and a stress free environment fr fr feel me if u have any home life problems leave those at the threshold and pick up ur drama on ur way home dont bring it to work with ya because all it takes is one sour puss to ruin a entire day fr fr seen it go on alot fr fr but not me because I'm there to do a job and make some easy $$ and I am one of them guys if u can't get things lined out between u and whom ever then it's time to take the both of u all out side and just let them swing it out till the problem goes away I kno this sound a little harsh but I never said I wasnt a reasonable man tho feel me because if its disrupting the work area then that's unexpectical to me and especially now that I got me a plotter and I want to.go out on my own because I'm tired of all the cry babys that always seems to. Have something to whine about fr fr because if they do it it.seems like it's perfectly fine but let me say anything then it all of a sudden becomes a problem naw I'm good fr fr what these companies doesn't understand is they apparently can't do what they would normally be paying ppl to do or they would trust me seen that bs line of excuses to many times kinda like someone owning a garage but never fixed a car in there lives fr fr so all ur doing is making them rich and ur still pour fr fr ahhhhhh naw lol unless this is ur personal shop idk why u dont take some of ur money and start to invest into some machines for u a shop so u eliminate all ur over head and begin to start sticking that into ur pockets instead of someone else's pockets because you are doing all the work but them and that company name is the ones who gaining all the clients not u ur more or less a used flunky is what I like to call anyone that's being used for there skill sets because u kno what ur capable of not the clients fr and idc if u was to charge 10$ less then who ur working for u will take all there business because ppl is about that almighty dollar fr lol
th-cam.com/video/b75Fz8CqAW4/w-d-xo.html and my name is shawn not Steve steve jobs has something to do with apple it's not me I just like staying in condo lol
I use the cut stripe and on one side it cut through and the other didn’t cut enough help???
SAME
very helpful, thanks
I have a question. What speed do you choose to cut tint on a graphtec plotter
15
15 is the downforce
I Downloaded ComputerCut pro. Im having issues when i print, it only cuts a section if the window. Ive tried moving tje image to the center of the film yet it keeps cutting just a section. Any idea.
@@TopTierDoberman do you have an option to view what you are going to cut on the software before you cut. Like a pair of glasses button to view it
Perfect - dull blade and need a walk thru calibration.
I'm new here