When I plug in the cord from the micro port above the SS slot and connect to USB to my computer, my computer is not detecting it in Explorer under My PC - any ideas why? I have the SD card removed. The red light is blinking as if it is recording and I tried holding down the V button to turn off record mode but nothing. Any suggestions?
Im not sure why that connection doesn’t work but you can take out the Micro SD Card and insert it into the usb flash drive; then plug it into your PC. Make sure an SD card is inside and use the power button to turn recording off.
Cannot thank you enough for this info! So hard to get help once you purchase these. Quick question, though. That will work for any future video. Do you know how to remove a date from video already obtained? Would deeply appreciate your help. Keep up the great work.
Hey thank you for that 🙏🏽 hmm I would say you might need to use an editing tool, but try this: th-cam.com/video/rIvmkhUmHUU/w-d-xo.htmlsi=tVFW3KjnSSot_BqP
STANDARD RECORDING To activate standby mode, hold down the "V" button until the blue light is solid. Click the "V" button again, and it will blink 3 times, indicating that it will save recordings every 10 minutes. MOTION DETECTION To enter motion detection standby mode, hold down the "V" button until the solid blue light turns on, then press the "M" button once. The solid red light will indicate that it is in motion detection standby mode. Press the "V" button once, and it will blink 3 times, placing it in motion detection mode. INFRARED MODE To start standard recording, hold down the "V" button to enter standby mode until the solid blue light turns on, then click the "V" button again and the "M" button once to activate night vision. The blue and red lights will blink 3 times simultaneously, indicating the infrared mode is enabled.
When I plug in the cord from the micro port above the SS slot and connect to USB to my computer, my computer is not detecting it in Explorer under My PC - any ideas why? I have the SD card removed. The red light is blinking as if it is recording and I tried holding down the V button to turn off record mode but nothing. Any suggestions?
Im not sure why that connection doesn’t work but you can take out the Micro SD Card and insert it into the usb flash drive; then plug it into your PC. Make sure an SD card is inside and use the power button to turn recording off.
Cannot thank you enough for this info! So hard to get help once you purchase these. Quick question, though. That will work for any future video. Do you know how to remove a date from video already obtained? Would deeply appreciate your help. Keep up the great work.
Hey thank you for that 🙏🏽 hmm I would say you might need to use an editing tool, but try this: th-cam.com/video/rIvmkhUmHUU/w-d-xo.htmlsi=tVFW3KjnSSot_BqP
Can you see the footage on your cellphone or just a computer/laptop?
Thank you for the tip👍
You bet! Thanks for watching 🙌🏽
Hi what i can doing for record video long time.?. now i record every 10 minute
Hi good good question. So the video recordings Save every 10 minutes. It will keep saving every 10 minutes unless you stop recording or power it off.
Boutta catch one of my 3 girlfriends cheating thank you Brody 🙏🏽
LMFAOO You’re so loyal to Them, how could They do this to you? 😩😢😂
thank you!
I’m glad I could help 🙌🏽
It doesn't work though. I don't know what's wrong. I tried so many times. Just not working.
Hey what’s not working? Setting the time or something else?
STANDARD RECORDING
To activate standby mode, hold down the "V" button until the blue light is solid. Click the "V" button again, and it will blink 3 times, indicating that it will save recordings every 10 minutes.
MOTION DETECTION
To enter motion detection standby mode, hold down the "V" button until the solid blue light turns on, then press the "M" button once. The solid red light will indicate that it is in motion detection standby mode. Press the "V" button once, and it will blink 3 times, placing it in motion detection mode.
INFRARED MODE
To start standard recording, hold down the "V" button to enter standby mode until the solid blue light turns on, then click the "V" button again and the "M" button once to activate night vision. The blue and red lights will blink 3 times simultaneously, indicating the infrared mode is enabled.
This is solid thanks 🙏🏽
Mr Wierdo
Mr on my meat