I really like the way you started and ended. Your are crafty and kind to share these great ideas. May you be filled with more wisdom to progress to higher levels.
an awesome build and an excellent show case of your talents. I converted a non working under the counter wine cooler into a incubator and hatching room. Thanks again for the video, you've given me several ideas to use when I upscale my next build.
I think to increase hatch rate u shud not include fan in the termostat but instead u shud plug it directly so your fan is working all the time non stop to make temperature the same all sides inside
i recommend used digital timer switch..so when your forget to turn the eggs atleast you can set the time for how many minutes or hours you want it to turn on..but it just turns on only one set time
I really like the way you started and ended. Your are crafty and kind to share these great ideas. May you please make video showing 1000 eggs incubator/hatchery. Thank you for your selfless wisdom. Could include the source of your timer and thermostat
You should think about meshing your water revoir, that way you don't have accidental drowning. What I mean it put a 1/4 inch caging mesh over the top with a lip going all the way around so it can't be knocked off or slide around. This will allow the chicks that jump out to be able to walk around on it but not fall into the water.
I wanted to tap you on the shoulder and warn, "The chicks will jump out of those baskets, into the water bowl!" And then you were honest that some died, so that is the positive side.
@@terryreyes1125I don't know much about incubator but we are trying to do this DIY incubator together with my dad. what would you recommend for better insulation? :)
Great job friend . I really appreciated your innovative work . Would you please tell me what kind of white board you have used for surrounding the frame? And what is the thickness ?
Q bien loco e indicas si funciona o no veo q funciona bien te felicito una pregunta para escuadrar los marcos utilizas esas escudradoras aca en Ecuador nunca las e visto son caras o no ahhh... sigue adelante tus videos son muy buenos ..
Sir interested ako s motor n ginamit mo s 1st video mo. . .any clue where i get it? Mukhang heavy duty kasi and can withstand heavg load for bigger capacity. Nice work sir salute.
How do you control humidity ? Is there any module that can do A if humidity is high or X when humidity is low ? I found a device that heats up the water and makes humidity to increase and just add a fun that brings air from outside to decrease humidity. I need a controller to control it though
What possible mechanisms should i put in place to make my egg turner from moving too fast. Iam using a wiper motor but my turner is too fast. Thanking you in advance.
I really like the way you started and ended. Your are crafty and kind to share these great ideas. May you be filled with more wisdom to progress to higher levels.
Sek, you are the best. This is a lot better than anything and with link to all the supplies needed you are a genious.
an awesome build and an excellent show case of your talents. I converted a non working under the counter wine cooler into a incubator and hatching room. Thanks again for the video, you've given me several ideas to use when I upscale my next build.
I think to increase hatch rate u shud not include fan in the termostat but instead u shud plug it directly so your fan is working all the time non stop to make temperature the same all sides inside
I think it should be that way ,👌
I like how you made simple the motor turning system it has been my main challenge in doing a low cost automatic turning machine. Awesome
A linear actuator with a timer to tilt the egg tray every 8 to 12 hours would be sweet. Great video, thanks.
big thanks from India! my customer wanted a machine to hatch eggs and this is the best idea! once again a big thanks bro! you gave life!
Haha lol
i recommend used digital timer switch..so when your forget to turn the eggs atleast you can set the time for how many minutes or hours you want it to turn on..but it just turns on only one set time
what do u prefer 12v or 220 v digital timer ?
I really like the way you started and ended. Your are crafty and kind to share these great ideas. May you please make video showing 1000 eggs incubator/hatchery. Thank you for your selfless wisdom. Could include the source of your timer and thermostat
This is mm first time adding comment on TH-cam I liked your egg incubator very good I need to here from you
Very well done for the construction .. Takes skills.
You should think about meshing your water revoir, that way you don't have accidental drowning. What I mean it put a 1/4 inch caging mesh over the top with a lip going all the way around so it can't be knocked off or slide around. This will allow the chicks that jump out to be able to walk around on it but not fall into the water.
I like the video very much send more videos thanks
Chala bagundhi anna
I wanted to tap you on the shoulder and warn, "The chicks will jump out of those baskets, into the water bowl!" And then you were honest that some died, so that is the positive side.
Great job ,just few modifications required.
What are the modifications ?
it is great please can you tell me how can wiring up all the bulbs, heater, funs and bulbs
Verry good
Ganda bro. parang magandang gawing negosyo yan ahh.
Really great job buddy!
Parabéns meu amigo, você é o melhor.
Um forte abraço desse seu admirador aqui do Brasil.
nice video very easy to make it at home everyone can do it, thank u for giving idea
very well done, brilliant idea😍
Nice egg!
So good
Gracias por enseñarnos tu sabiduría
awesomeness worok.. very nice...... I like.. goooooooood work.... man..👌👌👌👍👍
Excellent video and work with precision if u live in Pakistan I will must purchase it or give you 10k Incubator order to make.
You aced it.
Excellent information!!!
Fantastic job, dude! Really nice! 😃
Thanks dude :D
the eyebrow's the dog 😂
Hahaha
Well done for your tutorial but you are very fast. please may l know the sizes of the flat bar driving the egg turner.
Impressive work. New sub here.
What is the dimensions of the structure ?
Thank you very nice job
Thanks for sharing great videos. Where do get that green egg tray ?
Great job buddy! :)
Thanks buddy
Mag kano Bos 250 load encovetor m
Hi sir.. can u share the dimensions/details of ur design sir? Really impressive.. ty
Sir ask ko lang po saan kayo naka bile ng omron tempreature controller nyo?
Hanep ka bro napa subscribe mo ako!!!! Keep share po thanks sa video bro
good job
very nice
Bro digame como se llaman los conponentes electricos para conprarlos.
No podrías hacer un Video de El cableado? Que no vi como conectaste toda la caja de arriba
Boss anung klaseng playwood ginamit mo?
Thanks, very good
Eska price kitna hain.
Sir saan po ba ang direction ng hangin sa fan, sa ibaba ba o sa itaas
thank you very detail
Great job,can i get the copy of wireng diagram?sir
Hermano que material usaste para poner en los lados ?
Sir motter concet pees how lenth
Nice
How to order?
Ooo very good how many this incubater and wher are you from
bro mgkno 1000setter auto sa inyo at 500 hatcher?ty
any update in this project?
That's a low hatching rate though but atleast you were honest
What does it need for high hatching rate?
@@janenatividad7891 I'd say more insulation in his incubator I think hes not keeping the correct constant temperature
@@terryreyes1125I don't know much about incubator but we are trying to do this DIY incubator together with my dad. what would you recommend for better insulation? :)
@@janenatividad7891 styrofoam insulation from home depot would work.
@@terryreyes1125 thanks . Is there a requirement spacing for every tray?
Great job friend . I really appreciated your innovative work . Would you please tell me what kind of white board you have used for surrounding the frame? And what is the thickness ?
1/4 hardieflex
Magkano at anung size sa ginawa mo na incubator
How it turnautomatticaly
Nice chicken
Sooo nice bro.what is price ?
Boss I think u forgot to put the ventilator holes.without it humidity level increase repidly
Meus parabéns amigo trabalho top.
Sir pwede kuba malaman anu gamit mo timer or what kind you used timer I see at the top of incubator complete set... Thanks
Thanks for the info..👍👍👍
what name the thermostat?
Q bien loco e indicas si funciona o no veo q funciona bien te felicito una pregunta para escuadrar los marcos utilizas esas escudradoras aca en Ecuador nunca las e visto son caras o no ahhh... sigue adelante tus videos son muy buenos ..
W
1 dead badly
metal ba yang tubular? or aluminum yung frame mo sa box
Hello my friends, I have a question.
Where I can get the exact dimensions bro .
Your water bucket must have perporated cover for them safe.
Nice and Subscribed
boss sek ano name ng switch na ginamit mo para e manually turn yong rollers ? pwedi ba malaman ? thanks
I need to talk to you . I need some of those incubator.
Como ago para asemeja una de esas
Appreciated if there's anyone whos watching right can tell me how effective this type of incubator and hatcher.. please
Молодец!!!!
Sir interested ako s motor n ginamit mo s 1st video mo. . .any clue where i get it? Mukhang heavy duty kasi and can withstand heavg load for bigger capacity. Nice work sir salute.
Boss san kayu nakakabili ng pyesa nito kagaya ng thermostat
Tnx po sa video 🙂
Sir pwede ba mabili ng gawa na, at magkano po pati hatcher
Hindi accurate yng thermostat ko at thermometer ano po b ang ggwin ko alin s dlwa ang susundin ko?
How do you control humidity ? Is there any module that can do A if humidity is high or X when humidity is low ?
I found a device that heats up the water and makes humidity to increase and just add a fun that brings air from outside to decrease humidity. I need a controller to control it though
The oxigen can not come inside
boss san mo nabili yung motor na low rpm?
boss, magkano mag p gawa ng automatic incubator?
can i buy it? if the capacity is 500 eggs, how much is the price? can it not be sent to Indonesia?
Syamsul Bin Muhammad gak bisa 😂
How much
Nice one sir.. How much all ïn all expenses? Need to make this for up coming breeding
What is the used of the timer
To switch on the motor which turn the eggs.
What possible mechanisms should i put in place to make my egg turner from moving too fast. Iam using a wiper motor but my turner is too fast. Thanking you in advance.
If your wiper motor is 12v use 9v and down.
Thank you so much for the quick response. I am very grateful. I am actually using 9 volts on a 12 volt wiper motor.
Timer....flip -stop 2hrs....flip stop....a switch on both ends will do this.
You can use a microwave turning motor is better.
N Msellem Thank you so much. You guys are handy and resourceful.
San po area nyu
Sir, can I order for a 200-250 egg capacity incubator?
what is the best temperature for it?
Uhhh.. 👏👏👏🙌🙌🙌. Wish I was this smart
Fantastics
Sir magkano gnyan ka laking incubator sainyo, thnks
Hi
Can please tell me where can I order plastic eggs holder and 12v motor
Doesn't eggs have to rotate constantly?
They have to be rotate 5 to 6 a day
@@SekAustria thank you for feedback
Why didn't you cover water basin with plastic gauze
M gusto pero lastima k es puro ingles m gusto su video