Hatch Chick In Old Refrigerator || Full Tutorial

แชร์
ฝัง

ความคิดเห็น • 64

  • @mianinventions
    @mianinventions ปีที่แล้ว

    good work

  • @freebirdcraftshop8339
    @freebirdcraftshop8339 5 หลายเดือนก่อน

    This is really helpful! Thank you!

  • @gamecockcountry7731
    @gamecockcountry7731 7 หลายเดือนก่อน +2

    To be honest this is one of the best built incubator iv seen so far very impressive work man the only thing I did not like was the basket I would put something under it so all the eggs and dropping won’t fall on the bulb and fans as well as the bottom of the incubator

    • @junkyardgoodies3994
      @junkyardgoodies3994  7 หลายเดือนก่อน

      Thanks for your suggestions bro. I will upgrade it. Happy New Year!

  • @aileenkrauchi6553
    @aileenkrauchi6553 หลายเดือนก่อน

    Bravo,
    this had me so excited for you! I want to do this for my quail eggs.

  • @williamstanley5879
    @williamstanley5879 7 หลายเดือนก่อน

    Thank you

  • @DriftKingToBe
    @DriftKingToBe ปีที่แล้ว +2

    I'm currently working on my Fridge Incubator.
    I'm not keen on using bulbs for the heat since they tend to retain more heat after reaching running temp. Controller cuts off at 37.5 and the heat continues to rise. I'm using a PTC heater same as a normal incubator but still having an issue with regulating the heat. I'm currently running the SCT-3028 controller which has the DHT11 sensor so now upgrading it to the DHT22 sensor. Thinking about investing in an Arduino to properly calibrate the sensor.
    I will also be buying a 12v Trigger / Relay / Timer for the egg turner.
    Wish I could attach a picture here haha

    • @junkyardgoodies3994
      @junkyardgoodies3994  ปีที่แล้ว +2

      We have the same issue bro! You can fix it by using lower wattage incandescent bulb.i change mine from 40 watts down to 25 watts and it works well.

    • @DriftKingToBe
      @DriftKingToBe ปีที่แล้ว

      @@junkyardgoodies3994 I'm not using bulbs mate ;) I'm using a 290 degree Celsius PTC heat element. Maybe 290 degrees is too much haha. I might buy a few different elements such as a 170 degree and an 80 degree, then do some more testing. I'm thinking about adding a couple of heatsinks under the heating plate that the element is attached to. There is a lot of heat being transferred through the aluminum frame that I have the heat element attached to, so heatsinks may help to restrict the heat being transferred through the aluminium framing as much....... just different ideas ;) ;)

    • @junkyardgoodies3994
      @junkyardgoodies3994  ปีที่แล้ว +1

      @@DriftKingToBe wow! You have a impressive set-up mate. PTC heating element is way better than bulbs and more efficient. Thanks for sharing your ideas!

    • @_DSch
      @_DSch 5 หลายเดือนก่อน

      Just use a pid regulator and sensirion T&H sensor with an arduino. if you tune it correctly it will work.

  • @kendirk41oncog44
    @kendirk41oncog44 5 หลายเดือนก่อน

    The best.idol

  • @abdelkarimelrhazi3033
    @abdelkarimelrhazi3033 11 หลายเดือนก่อน

    👍👍👍

  • @JEFFSTRIKERVLOG0279
    @JEFFSTRIKERVLOG0279 5 หลายเดือนก่อน

    Nice incubator po

  • @danle746
    @danle746 ปีที่แล้ว

    Love the idea of using a used fridge, I didn’t get how you made the egg turn rotate side to side though?

    • @junkyardgoodies3994
      @junkyardgoodies3994  ปีที่แล้ว +1

      Sorry for that part,it happened that the video containing the egg tray turning doesn't support my video editing app. There's a 220v motor at the top of the setter trays that turns every 2 hours or you can set it according to your choice,you can set it on the timer.

    • @jeewanbahadurkhati9217
      @jeewanbahadurkhati9217 ปีที่แล้ว

      @@junkyardgoodies3994 can we set the motor on that STC 1000 or we need to add another timer device?

    • @junkyardgoodies3994
      @junkyardgoodies3994  ปีที่แล้ว

      @@jeewanbahadurkhati9217 We need to add a Sinotimer brother,then plug your egg tray turner motor into it.

  • @chair23
    @chair23 ปีที่แล้ว

    Amazing! I'm planning to build one, I hope you can help me brother

    • @junkyardgoodies3994
      @junkyardgoodies3994  ปีที่แล้ว +1

      No problem bro,just drop a message or send me your email address so that I can guide you.

  • @pretamoura3865
    @pretamoura3865 6 หลายเดือนก่อน

    Maravilha rapaz

  • @hamzahsaidy6688
    @hamzahsaidy6688 หลายเดือนก่อน

    What's the tray to tray distance?
    Does fans blows downward or upward?

    • @junkyardgoodies3994
      @junkyardgoodies3994  29 วันที่ผ่านมา

      @@hamzahsaidy6688 trays distance is 10 centimeters or 4 inches apart so that you can achieve maximum capacity,but you can adjust more distance for better air circulation. The fans blows upward.Goodluck brother.

  • @danchengkaba2722
    @danchengkaba2722 ปีที่แล้ว

    I learned a lot from this video. I built my own but it can't hatch Chicken eggs. I can only hatch Guinea fowl eggs. The chicken eggs won't even show that they are fertile after candling. Any help

    • @junkyardgoodies3994
      @junkyardgoodies3994  ปีที่แล้ว +1

      Good day my friend! If you can hatch Guinea fowl egg,it means your incubator is good. The problem is in the chicken egg, I think it's not fertiled.

    • @danchengkaba2722
      @danchengkaba2722 ปีที่แล้ว

      Thanks so much@@junkyardgoodies3994

    • @junkyardgoodies3994
      @junkyardgoodies3994  ปีที่แล้ว

      @@danchengkaba2722 welcome bro

  • @Munadi138
    @Munadi138 ปีที่แล้ว

    I want to ask the boss. how many degrees is the slope of the egg rack.???. and the lamp and the fan are made into one cable??? thank you

    • @junkyardgoodies3994
      @junkyardgoodies3994  ปีที่แล้ว +1

      30 degree angle bro, the bulb and fan have a different connection .

    • @Munadi138
      @Munadi138 ปีที่แล้ว +1

      @@junkyardgoodies3994 thanks

    • @Munadi138
      @Munadi138 ปีที่แล้ว

      @@junkyardgoodies3994 does the fan run nonstop 24 hours???

    • @junkyardgoodies3994
      @junkyardgoodies3994  ปีที่แล้ว

      @@Munadi138 for higher hatch rate bro I recommend you to turn the fan nonstop.

  • @hirasmith9790
    @hirasmith9790 11 หลายเดือนก่อน

    Hi good afternoon I would like to know if you make any of the incubators available for sale and how can I reach you awaiting for your reply

  • @kenzieadek537
    @kenzieadek537 2 หลายเดือนก่อน

    Kipasnya menghadap kearah mana bro

  • @user-rr1kp3wu6y
    @user-rr1kp3wu6y 4 หลายเดือนก่อน

    اخي السلام عليكم ورحمه الله وبركاته كيفك يا اخي

  • @JHUNSKIETVCHANNEL
    @JHUNSKIETVCHANNEL ปีที่แล้ว +1

    pagkapisa sa 21 days bro.,ilang araw pa siya tatagal ,sa loob ng incubator..salamat sa sagot

    • @junkyardgoodies3994
      @junkyardgoodies3994  ปีที่แล้ว +2

      21 days lang labas na sila dapat sa incubator bro or basta natuyo na lahat ang balahibo nila,iwan mo nlang muna yung mga mejo mahina pa.

    • @JHUNSKIETVCHANNEL
      @JHUNSKIETVCHANNEL ปีที่แล้ว +1

      @@junkyardgoodies3994 salamat bro.,tapos ano una mo pinapakain sa kanila,booster chicks ba?

    • @junkyardgoodies3994
      @junkyardgoodies3994  ปีที่แล้ว +2

      @@JHUNSKIETVCHANNEL chick booster bro,saka ka mag-shift ng starter after 2 weeks

    • @JHUNSKIETVCHANNEL
      @JHUNSKIETVCHANNEL ปีที่แล้ว +2

      @@junkyardgoodies3994 ok bro.salamat sa info

  • @user-iv8jm7yb3g
    @user-iv8jm7yb3g 11 หลายเดือนก่อน

    sir hnd nyo po naipakita kung paano mo nilagay yong device na pampaikot ng eggtray

    • @junkyardgoodies3994
      @junkyardgoodies3994  11 หลายเดือนก่อน

      Hello sir, sorry po hindi po Kac supported ng editing app. ko Yong part na nilalagay ko Yong egg turner nga mga trays at Yong timer.

  • @pawel25431
    @pawel25431 7 หลายเดือนก่อน

    Pokaż jak sprzątasz po inkubacji .

    • @junkyardgoodies3994
      @junkyardgoodies3994  5 หลายเดือนก่อน

      It's easy, just spray or pour water at the bottom. 100 percent water proof, just avoid the electrical parts

  • @christianbulanadi9075
    @christianbulanadi9075 4 หลายเดือนก่อน

    Kabayan? Location mo if malapit lang baka pwede maview

  • @ardacsdacs4481
    @ardacsdacs4481 ปีที่แล้ว +1

    Ok yung recycled egg incubator mo, ayos alam mo paano. Pero sa itlog bago isalang di ba may limit din sa araw kung ilang days na yan. Kasi kahit mamahalin yung incubator mo at isalang mo more than 2 weeks na konti lang mapipisa. Paki comment kung tama at ano ang tamang gawin. Salamat.

    • @junkyardgoodies3994
      @junkyardgoodies3994  ปีที่แล้ว

      Konti na lang talaga mapipisa pag 2 weeks katagal bago isalang yong fertile egg sir, try mo ng 1 week lang. Sa akin kasi every week ang salang ko. Ang hatch rate ko ay 80-90 percent.

  • @ejobsign4310
    @ejobsign4310 หลายเดือนก่อน

    pwede magpagawa?

    • @junkyardgoodies3994
      @junkyardgoodies3994  หลายเดือนก่อน

      Location mo sir?

    • @ejobsign4310
      @ejobsign4310 หลายเดือนก่อน

      @@junkyardgoodies3994 Laguna Pila

    • @junkyardgoodies3994
      @junkyardgoodies3994  หลายเดือนก่อน

      @@ejobsign4310 ang layo ko sir Ilocos..DIY mo nalang sir,madali lang at kompleto ang parts sa online shop.

  • @machomalli3866
    @machomalli3866 ปีที่แล้ว

    I have a H&N male & female
    But they are not parents from germany
    I have parents egg hache
    Come pullet
    Female brown male white
    Am hatch these layer egg
    Not come like parents colour seperation brown & white
    Send me a whatz App ur no

    • @junkyardgoodies3994
      @junkyardgoodies3994  ปีที่แล้ว

      I'm a certified breeder of H&N brown nick. The F1 will hatch with color sexing,the female will hatch brown in color and the male will be in white.