I remember seeing a video from the previous owner about this car how he was flexing he bought a Ferrari at a young age, but he didn’t show any damage and acted like it was a good car. Now he deleted all traces of this car from his socials 😂 just goes to show the whole “fake it till you make it” mentality is still alive and well.
Man!! Is a hard project, but nonetheless a great thing to see someone making a huge effort. God will be with you always man. Bless to see a brother making real efforts 🎉
Always something new, this ginger bro has incredible skills and a vision. Much respect and appreciation for the hard work and willing to learn, plus entertain us. Bless him
This will be a serious challenge and very costly as well. Todays luxury cars are fully packed with electronics and motors everywhere. Each motor has to be checked and maybe swapped. Every connector that caught water might have corrosion. Wish you best of luck for this mission. 😊😊😊
I must admire your bravery attempting this mammoth job I had an E46 M3 that had flood damage and after it looked fine for a day or so but then the issue of it hydrolocking of engine appeared and that just killed any chance of retaining the car and every module eventually would start to fail I’m sure down the line so sold it to a friend who does repair salvage but he never ever hit the car going after na y attempts as believe even timing jumped on the van is system too 😮
Remember circuit board that look gone can be brought back to life. Baking soda and distilled water will eat any corrosion from board, plugs, pins etc. Circuit boards can be cleaned with soap and water and scrubbed with a toothbrush. Dip corroded plugs in baking soda / distilled water, dry with compressed air, scrub with a tiny wire brush if necessary, then use dielectric grease on every connector. Super Clean works wonders on circuit boards, rinse and dry with compressed air and let sit to dry out completely.
Cj I hate to say it but flooded cars are worse than wrecked cars that most likely saw salt water and every wire and computer will need replaced even if the connection looks ok or cleanes up it will be messed up under the coating all down the harness that you can't see and will get worse over time you need to budget for all new wire and electrical equipment and the brand on the title will be worse than salvage so you will need your video proof that all that was replaced
È chiaro che sono tutti progetti di cui ha bisogno, visto che questa è la sua attività. Ma secondo te tra il costo dell'automobile e di tutti i ricambi che dovrà prendere nuovi perché non credo ci sia molto di seconda mano. Alla fine costerà come una usata?
@@mariocinque8588 vediamo! La parte bella è che il lavoro lo deve fare lui😁 tra connettori e moduli avrà da divertirsi per un bel po'! Bel progetto in ogni caso
@@davidemantovi6678se ci pensi è solo un grosso lavoro di "pulizia", ed e probabile che qualche centralina sia senza danni, "lo spero" se ha i fondi per i pezzi di ricambio nuovi ce la può fare.
@@mariocinque8588 i fondi sembra averli eccome! Se hai notato tutti i componenti tipo automotive hanno i connettori tipo super Seal da ip68 e le centraline sono perfette. Mentre tutta la roba come per la pompa della webasto con connettori industriali sarà una tombola da recuperare. Ci vorrà sicuramente tanto tempo per lui per sistemare tutto e sono sicuro che lo farà, il mio interrogativo è a che prezzo. Hai visto la serie della MV? Ha salvato solo il grosso del motore, tutto il resto a ricambio!!!! Vedremo nel video dove rivela il costo. Ma sono sicuro che gli è venuta a costare come una buona di seconda mano
You should drop your bike tire pressures. 32-33 is plenty stiff for the street, any higher is for with a passenger/lot of freeway commuting. For a track, drop it down to about 28, and for sport roads I prefer 30, but 36 is too harsh
Lol, if you thought MV parts were hard to get and expensive just wait until you need very specific Ferrari parts 😂
understatement.
Dont waste your time ....most youtubers dont read the comments...only care bout the numbers
Anda sirik karena tidak mampu beli mobil ferari
With youth comes foolishness, I’d have thought his financier (Dad) would have ruled out that purchase 😂
same goes for the build. Flooded cars are a nightmare to fix.
Oh God, the Ferrari moneypit. I hope you make it out on the positive, these cars are trouble. Prayers to you my friend.
I remember seeing a video from the previous owner about this car how he was flexing he bought a Ferrari at a young age, but he didn’t show any damage and acted like it was a good car. Now he deleted all traces of this car from his socials 😂 just goes to show the whole “fake it till you make it” mentality is still alive and well.
I love how you get right to it, man this is so amazing, you are not scared of any build.
CJ..you move up..a Ferrari..it's gonna be a he'll of a content. Fix it and run it. You have my blessings..you go..😂😂😂😂😂🙏💯♥️
CJ - Might want to reach out to Tavarish on how easy fixing flood cars is…😉 Thanks for sharing, always enjoy your videos!
How do you manage all the funding man!?!?
Hats off!!
Man!! Is a hard project, but nonetheless a great thing to see someone making a huge effort. God will be with you always man. Bless to see a brother making real efforts 🎉
Always something new, this ginger bro has incredible skills and a vision. Much respect and appreciation for the hard work and willing to learn, plus entertain us. Bless him
Look, we're making a lot of progress here... Now we have a super sports car reference
CJ is flying 👏👏👏👏
Dopee!!! Glad you got it back safely!
Hi CJ,............wow man............happy to see you rebuilding a Ferrari. That´s really nice mate!
Commenting to help the algorithm. Also sending this to my friends. You’re going to need that sponsorship money😂.
“How deep is your love” 😂 you brave dude 🤟🏻
your work is such a piece of art. You always leave us amazed !!!
Dude, love seeing someone like you doing all of these action vehicles. God Bless my friend!
NOW WE'RE TALKIN. 🔥🔥🔥
Not underestimating your capabilities but Throtl who are already car experts had to hire a Ferrari expert to make their car run. Good luck!
something amount Americans confidence , stating they can fix or do anything !
pretty tough work ahead bro
Let's follow this excellent project, congratulations!!!!!
Oh Hell YEA! You're the Mann! Dude, I still want to see the MV Agusta finished! Awesome!!
I am very happy for you!!! I hope you can get this Ferrari running soon...
That fireblade is a piece of art, one thing to always keep doing is cleaning that's the secret of an always working machine
Man, you have a tough conquest. We'll enjoy watching you to fix that italian beauty!!
Video starts properly at 9:59
Desejo sucesso no novo projeto! Tmj!!!
That is such a nerds dream with all those wires and harness.
Ice blast the car and you are good to go.... Best of luck cj
My boy ur stepping up in the world
This will be a serious challenge and very costly as well. Todays luxury cars are fully packed with electronics and motors everywhere. Each motor has to be checked and maybe swapped. Every connector that caught water might have corrosion. Wish you best of luck for this mission. 😊😊😊
R7 to Ferrari, nice upgrade 😊
ok, this really caught me by surprise
I must admire your bravery attempting this mammoth job I had an E46 M3 that had flood damage and after it looked fine for a day or so but then the issue of it hydrolocking of engine appeared and that just killed any chance of retaining the car and every module eventually would start to fail I’m sure down the line so sold it to a friend who does repair salvage but he never ever hit the car going after na y attempts as believe even timing jumped on the van is system too 😮
Moving up in the world! I like it.
Been waiting for this upload 🫡🫡
hi..i've been watching your videos for a long time. and i started making motorcycles myself. god bless you
very nice CJ! Its a 4 wheel Ducati pretty much...Looking forward to this. Please drop a big burn-out when your done, ok?
Say Bye Bye to your savings 😃😃
Projects like these will kill anyone with OCD.🤕
Big Big level up cj 💪 good luck from italy ❤
Been waiting to see this one
Remember circuit board that look gone can be brought back to life. Baking soda and distilled water will eat any corrosion from board, plugs, pins etc. Circuit boards can be cleaned with soap and water and scrubbed with a toothbrush. Dip corroded plugs in baking soda / distilled water, dry with compressed air, scrub with a tiny wire brush if necessary, then use dielectric grease on every connector. Super Clean works wonders on circuit boards, rinse and dry with compressed air and let sit to dry out completely.
Cj I hate to say it but flooded cars are worse than wrecked cars that most likely saw salt water and every wire and computer will need replaced even if the connection looks ok or cleanes up it will be messed up under the coating all down the harness that you can't see and will get worse over time you need to budget for all new wire and electrical equipment and the brand on the title will be worse than salvage so you will need your video proof that all that was replaced
This won't be a cheap fix CJ, maybe you should contact Tavarish or find his TH-cam channel, and ask him where to find reasonable priced parts...
Sono sicuro che un appassionato di motori come te, saprà prendersi cura anche di una Ferrari.
È chiaro che sono tutti progetti di cui ha bisogno, visto che questa è la sua attività. Ma secondo te tra il costo dell'automobile e di tutti i ricambi che dovrà prendere nuovi perché non credo ci sia molto di seconda mano. Alla fine costerà come una usata?
@@davidemantovi6678 credo che si gli costerà un bel po', ma siccome credo che la rivenderà alla fine ci guadagnerà.
@@mariocinque8588 vediamo! La parte bella è che il lavoro lo deve fare lui😁 tra connettori e moduli avrà da divertirsi per un bel po'! Bel progetto in ogni caso
@@davidemantovi6678se ci pensi è solo un grosso lavoro di "pulizia", ed e probabile che qualche centralina sia senza danni, "lo spero" se ha i fondi per i pezzi di ricambio nuovi ce la può fare.
@@mariocinque8588 i fondi sembra averli eccome! Se hai notato tutti i componenti tipo automotive hanno i connettori tipo super Seal da ip68 e le centraline sono perfette. Mentre tutta la roba come per la pompa della webasto con connettori industriali sarà una tombola da recuperare. Ci vorrà sicuramente tanto tempo per lui per sistemare tutto e sono sicuro che lo farà, il mio interrogativo è a che prezzo. Hai visto la serie della MV? Ha salvato solo il grosso del motore, tutto il resto a ricambio!!!! Vedremo nel video dove rivela il costo. Ma sono sicuro che gli è venuta a costare come una buona di seconda mano
Wow level up keep up the good work i watch this Chanel sence 10 thousands subscriber
Una Ferrari allagata? Sarà molto divertente! Facciamolo e buona fortuna.
Manager, where do you get the money for all these toys😎😎🤣🤔
Jeeeeeze that guy is properly ginger! WoW!
Waiting for Brutale update
Hi CJ, this is awesome. 😊
this build bout to make you look 25 years older :D
Great progect cj best wishes
This is definitely going to be a more ambitious build compared to the MV Agusta. I’m pretty sure neither will be running and driving.
Good Luck CJ ;-)) you’re going to need it.
You should drop your bike tire pressures. 32-33 is plenty stiff for the street, any higher is for with a passenger/lot of freeway commuting. For a track, drop it down to about 28, and for sport roads I prefer 30, but 36 is too harsh
big fans from indonesia 🇮🇩
Nothing is impossible you can do it my friend.
great project but big project hope you can juste replace mainly the connectors and not all modules
otherwise its gonna be expensive
wow Ferrari .. awesome CJ
My porsche panamera was the same way had to replace all the electrical components in the back and under the seat too me a year to complete now I enjoy
maen Ferrari class men 🔥
Meant to leave the sprocket carrier off when you balance the wheel.
We've seen a lot of tire changes now
Dammit...even my credit card is hurting just thinking of how much the parts are going to cost.
Good job 👌
Hej CJ. I still waiting for mv brutale final movie. Greetings from Poland 👍
Dude, you're biting off a big project. This is your first car? Good luck.
Here we go again
man pushing his limit
thats crazy dude, but i believe you!
Good morning CJ .But here in India 🇮🇳 it's evening ❤
With Built from the Bottom. Great 👏😃
Love form India tamilnadu❤
BRAZIL!
hell yeah
He got al of my dream superbikes. Honda CBR1000RR fireblade Base modellen, Aprilia RSV4 Base model and the limited edition MV Agusta brutalle 1000R
Damn wish I’d known you were coming to FL we could’ve rode my bikes
Cj 🤩✌️🔥🔥🔥🔥
Greeting to see man of god this other man of god from trinidad and tobago
you are so industrial love from bangladesh 💚
You said at the end you were ordering your favourite tyre a rosso 3 then unwrapped a rosso 4 😂
Fala ruivinho mexe até em Ferrari modelo top!
Holy sh*t how many part do you have?
Esse vai dar trabalho em
La moto suena como un scooter 🛵😂😂
Hey CJ, why change the whole tire if is not leaking air? those things are repairable you know!
Whats worst than a California Ferrari? a flooded one 😂
Wish i had the courage to start rebuilding cars i love ..but jst thinking of the expenses.
BIG BOY
Ferrari 😮
Dude great content, will you be will to sell me that old tire with the nail?
oh shit here we go again
what happened to the mv agusta?
Hi! Did you have the need to change the tyre? Why did you not fix it?
2:16 Oh I know this car. He bought it off another bike rebuilder. It must be pretty bad if he’s selling it without doing the rebuild. lol
Really? What's his channel name?
What has happened to the transit van?
WOAH
Cj, quando vai ter motos da suzuki (Gsx 1000, Hayabusa, etc...), Pretende trazer também outros tipos de motos além das carenadas ?