INSANE 33 3D Printers Reviewed in 9 Months!
ฝัง
- เผยแพร่เมื่อ 28 ส.ค. 2024
- FlexiSpot generously sponsored this video - Trust me! You need a cool standing desk to put in your studio like mine! Use my code “24BDYTB50” for an extra $50 off on the E7 Plus desk! Check the FlexiSpot website to get more exclusive discounts!
FlexiSpot E7 Plus Standing Desk:
loyal.ms/flexi... (US)
loyal.ms/flexi... (CAN)
This was a fun video to put together, tiring, but fun! My family carried every single one of these printers from Studio B over to Studio A so we could film each one of them. And of course, they carried them all of the way back over there. AMAZING! Thank you family!
We wanted to really show how far 3D printing has come even in just the last 9 months. 3D printers are changing so rapidly that in as little as a few months time, some of these printers are nearly irrelevant feature wise and also as far as the price is concerned.
I hope you enjoyed it, and make sure you drop and like and a subscribe! It helps us out a lot!
---
Some of the links shared in our content may contain affiliate or promotional links where we may receive compensation through your use of them. Thank you for supporting our content!
I am incredibly fortunate to have Polymaker as my official sponsor! Using my affiliate link is a fantastic way to help support our content!
loyal.ms/polym...
PRINTERS IN THIS VIDEO!
1: Bambu Lab A1 Mini
loyal.ms/bambu (aff)
2: Bambu Lab A1
loyal.ms/bambu (aff)
3: Elegoo Saturn 4 Ultra Resin Printer
loyal.ms/elegoo (aff)
4: TwoTrees SK1
loyal.ms/twotr...
5: Creality Ender 3 V3 SE FDM Printer
loyal.ms/creality (aff)
6: Creality Ender 3 V3 KE FDM Printer
loyal.ms/creality (aff)
7: Creality Ender 3 V3 FDM Printer
loyal.ms/creality (aff)
8: AnkerMake M5C FDM Printer
www.ankermake....
9: Comgrow T300 FDM Printer
loyal.ms/sovol (aff)
10: Comgrow T500 FDM Printer
loyal.ms/sovol (aff)
11: Kingroon KP3S Pro V2 FDM Printer
loyal.ms/klp1230 (aff)
12: Creality Halot Mage Pro 8K Resin Printer
loyal.ms/creality (aff)
13: JG Maker R1 FDM Printer
www.jgmaker3d.... (CODE: JGMAKER90)
14: Artillery Sidewinder X3 Pro FDM Printer
loyal.ms/artillery (aff)
15: Artillery Sidewinder X4 Plus FDM Printer
loyal.ms/artillery (aff)
16: Anycubic Kobra 2 Pro
loyal.ms/anycubic (aff)
17: Elegoo Neptune 4 Plus FDM Printer
loyal.ms/elegoo (aff)
18: Kingroon KLP1 (210mm) FDM Printer
loyal.ms/klp1230 (aff)
19: Kingroon KLP1 (230mm) FDM Printer
loyal.ms/klp1230 (aff)
20: Longer LK5 Pro FDM Printer
www.longer3d.c...
21: ELEGOO Mars 4 DLP Resin Printer
loyal.ms/elegoo (aff)
22: FYSTEK VORON 0.2 R1 V1.1 Pro Kit
loyal.ms/littl...
23: Mingda Magician X2 FDM Printer (price is $209 US -- sorry for the mixup)
3dmingdaoffici...
24: Uniformation GK Two
uniformation3d...
25: RenColor AC-10
26: AOSEED X-Maker Joy
loyal.ms/xmake... (aff)
27: Geeetech Alkaid 2K LCD Curing Resin Printer
www.geeetech.c...
28: QIDI Tech Q1 Pro
loyal.ms/qidi (aff)
29: Creality K1C FDM Printer
loyal.ms/creality (aff)
30: Creality K1C FDM Printer
loyal.ms/creality (aff)
31: Sovol SV07 Plus
loyal.ms/sovol (aff)
32: Sovol SV08
loyal.ms/sovol (aff)
33: ELEGOO Mars 5 Ultra
loyal.ms/elegoo (aff)
Did you know that I am LIVE on Twitch 3x a week (Mon/Wed/Fri @ 5PM Pacific) where we nerd and geek out about 3D printing for HOURS! Oh, and we also have sponsored giveaways EVERY SINGLE SHOW! Come by, say hello, we'd love to see you there.
/ loyalmoses
Also, we have one of the ABSOLUTE BEST 3D printing discords that have ever existed! An incredible, thriving and supporting community with weekly contests and giveaways as well as support channels and so much more! I do most of my announcements there as well, so you'll want to join for sure!
loyal.ms/discord
We have the BEST sponsors for our content, take a look at these amazing companied who regularly sponsor our content here on TH-cam and other platforms!
Bambu Lab
loyal.ms/bambu (aff)
Gloop!
loyal.ms/gloop
Micro Swiss
loyal.ms/micro...
Slice Engineering
loyal.ms/slice (aff)
LDO Motors
loyal.ms/LDO
Vision Miner
loyal.ms/visio...
---
Video Chapters (if any will be here)
00:00 Intro
#3DPrinting #bambulab #3dprinting
![[TH] VALORANT Champions Seoul - Grand Final - EDG vs TH](http://i.ytimg.com/vi/WvObMc9VelI/mqdefault.jpg)
FlexiSpot generously sponsored this video - Trust me! You need a cool standing desk to put in your studio like mine! Use my code “24BDYTB50” for an extra $50 off on the E7 Plus desk! Check the FlexiSpot website to get more exclusive discounts!
FlexiSpot E7 Plus Standing Desk:
loyal.ms/flexispot (US)
loyal.ms/flexispotca (CAN)
TIMESTAMPS:
0:20 Bambu Lab A1 Mini
0:56 Bambu Lab A1
1:45 Elegoo Saturn 4 Ultra
2:52 TwoTrees SK1
3:49 Ender 3 V3 SE
4:43 Ender 3 V3 KE
6:42 Ender 3 V3
7:53 Ankermake M5C
8:45 Comgrow T300
9:54 Comgrow T500
10:45 Kingroon KP3S Pro V2
12:07 Halot Mage Pro 8K
13:07 JGMaker R1
14:12 Sidewinder X3 Pro
14:48 Sidewinder X4 Plus
15:56 Anycubic Kobra 2 Pro
16:52 Elegoo Neptune 4 Plus
17:47 Kingroon KLP1
18:56 KLP1 230mm
20:03 Longer LK5 Pro
21:05 Elegoo Mars 4 DLP
21:44 Voron 0.2 R1 Kit
22:52 Mingda Magician X2
23:54 Uniformation GK TWO
24:50 Rencolor AC-10
26:36 Aoseed XMaker Joy
28:28 Geeetech Alkaid
29:37 QIDI Tech Q1 Pro
30:42 Creality K1C
32:21 Sovol SV07 Plus
33:21 Sovol SV08
34:39 Elegoo Mars 5 Ultra
That is super kind of you!
I like the cooperation between you and your wife in these videos. I am sure it helps with the plethora of stats you have to keep track of.
Thank you! Mrs LM is AMAZING and she's had to learn so much about 3D printing so quickly, and I couldn't do any of this without her! Also, her memory is WAY better than mine, so that helps too. :-)
Great video. Like that presentation. Couple of those I’m going to check out.
Thank you!
My personal list by price: Ender 3 v3 se $159 , Bambu A1 mini $199, Flashforge AD5M $299, Anycubic Kobra 2 plus $360, Anycubic Kobra 3 combo with multicolor $449. Those are pretty much THE best bang for buck on the market
Awesome!
@@LoyalMoses Thnx LM 😊
Just ordered a Bambu A1 in the sale for only £289! (without AMS). I did have an original ender 3, but felt it was time to upgrade as I am fully into the hobby now!
Congrats! You will absolutely love it and I hope it arrives fast for you!
@@LoyalMoses thanks!
@@LoyalMoses Update! Bambu A1 arrived yesterday and I’ve been printing non stop. I am so glad to have a printer that just does what I tell it, every time.
AWESOME!!! Congrats!
Agree on the buys 💯
Yes!
Great stuff. FYI, I got a Q1 Pro and really dig it. Thanks for all you do!
That’s a great machine! Thank you!
my first 3d printer was a longer, it tested my soldering skills, and was blah. Tuned it to "ok". heated bed melted down twice. Upgraded to Creality CR10 v2, still using it. Prints as good as some newer printers.....just not as fast :) that speed on the new ones is incredible.
I’m glad you got to learn fast and that you are happy! That’s all that matters!
I didn't notice until the KLP1, that the table kept getting higher. By the SVO8, it was getting ridiculous. lol
Haha! Every printer we raised it a specific amount when filming! 😆
It’s always tricky when balancing features vs price but I agree bambu are dominating because of price point, but so many other options are great choices. Another great video
Thank you! And that is exactly what I was aiming for so I am super happy you picked up on it. The industry is full of awesome machines, and I honestly LOVE them all!
Its nice to see all the great comments on the printers even if you would not buy it now adays its good to see that you didnt really have anything bad to say about any of them Really leaving it to personal choice and not putting down the brand just because of the brand. always great videos to watch.
For the past couple of years it's been pretty popular for content creators to jump on the 3D printer hate wagon for the clicks and views... that's just not my style. Thank you so much for watching and chatting!
FYI - The Mingda Magician X2 FDM is only for $109 in Australia. In the US it is $209 per their website.
Oh no! I'll check, maybe we made a mistake when looking up pricing?!
The desk has me wanting one for our stained glass shop!
I am really like it!
I know it's not out yet and it's probably next year/winter before it's an option but the CFS compatibility kits for Creality printers are coming so we shall see how the Ender3 V3 hold up by then.
The filament mixing head of the Rencolor is such a cool tool option. I hope they move forward with that for other printers.
The moment it arrives, I'll have content for it! And yes, that rencolor made me sad!
Love the video .agreed with most of your opinions,just incase you did'nt realise i am fairly sure your desk is hight adjustable ,lol 😂
Thank you! I'd have been less tired if the desk went the other direction when I was filming! ;-)
I got the Ender 3 V3 KE on Creality's refurbished ebay store for $177 out the door. It looks brand new. (Ebay had a 20% off coupon). ITS MY FIRST 3d PRINTER EVER!! I got 30 day return and 2 yr warranty included. It has been running almost non-stop for 2 weeks and it runs great!! Your vids helped me narrow down which models to look at. Thanks.
WO! That is a score right there! Great job, because that is a fantastic printer! I am so glad I could help!
Mrs. LM should do relaxing audiobooks, or narration, or announcing, or some kind of voice work. I find her voice incredibly pleasant.
Thanks! Her voice is beautiful! 💜
I did the Micro Swiss Upgrade on my Neptune 4 Max , So easy and I love Micro Swiss. Now have the Flowtech on my KE, K1 Max and Neptune 4 Max.
Fantastic! Those are some pretty sweet setups!
Hey, I noticed there aren't chapters on this video yet, but your previous video in this format had chapters. Do you plan on adding them in the future?
Sometimes we come back in and put chapters on the videos! I'll be sure to do that as soon as I can sometime in the next couple of days!
LETS GO! Another great LM video!
THANK YOU!
Any plans on checking out the Flashforge Adventurer 5m? I recently got it coming from a ender 3 and I think it’s incredible. Was looking at the a1 mini but the size was a bit small for my personal needs and a core xp for $300 I couldn’t be happier
Absolutely! If they send it, I will take a look at it!
It's nice you finally got an adult sized desk... In all honesty taking the short jokes and making it a running gag with putting things on the desk was hilarious, LM the 3D Printing Elf On A Shelf.
:-)
Love that T500!!! Great video and listings!
Thanks 👍
for #24 the gk two you stated the printer size as its build volume and got me a little excited :(
Oh did I?! Crud! I'll have to go back and watch it again. 🤦♂️
I really like these videos. It's a great rundown of many printers and whether they are worth it with how they compare price for what you get with others. Although I did see the V3 SE on there and have to say, I'm not happy with mine. I think I got the runt and I'm looking for a replacement.
Thank you! Also, OH NO! What happened to your SE?!
@@LoyalMoses not sure, it was good for a while and then just started giving me fits. Been an uphill battle ever since. Unfortunately with the lack of firmware updates and support or open source code, I just don't know what to do. It still has its moments of good prints but I think I'm past the tinkering phase and just want to print. Your channel has provided a lot of good information on other brands/models and general information so I'm on it all the time and in as many streams as I can be.
I am so sorry to hear that! I wish you had my experience with it, it's been great! Thanks for tuning in and being a part of this awesome community!
Noticed that there is no number 30 ;)
It's been a bit, but I think we edited that out, but I can't remember why now. I'll have to go back into FCP and look.
Great review I highly enjoyed it. You are correct prices of 3D printers are dropping like a rock. For I watch for the best sales with coupons, if possible, to save a few bucks. I can put the few bucks to more filament.
Thank you so very much! I can't believe how low the prices are and I think they'll still go lower!
Great video. What your opinion on flashforge adventurer 5m? Thank you
Well, i used one and i liked it, i like that i dont have to open the enclosure while printing pla since it does auto air circulation and stuff, good speed good quality id buy
Not quite sure! I'll have content for it the moment it arrives!
Did I miss the Qidi X-Max3? I bought one last month (cautiously optimistic) but I'm happy with it.
I have the X-PLUS 3.
My ender seems to make really good prints. you mentioned about doing some tweeking to get to produce better prints. What would you recommend. Is it just settings on the slicer? Speed? Nozzle? Thanks
Come to our discord! We will help you with everything!
loyal.ms/discord
There are all sorts of little slicer settings and changes that you can make to improve print quality and even speed results.
Great recommendations!
THANK YOU!
My SV08 is amazing. There is one big issue and that is the z-offset. My first layers are ALWAYS garage. I started looking through the macros to see if I could get it to do the z offset calibration before bed mesh, but the macro dependencies are a nightmare to deal with. I thre in the towl and bought a BTT Eddy. But that's going to require me to update klipper to BTT's fork. I'm going to try to reuse the .cfg files from sovol on it, but as far as I can tell I haven't seen anybody do this yet. There is an adapter on printable for anyone interested though.
Yes, I had trouble with the z as well. I'll have to revisit the machine and see if there is a solution available that is simple.
Best value for 180*180 bedslinger? How about kp3s?
I didn't have the best experience with the KP3S Pro, but I do have the V2 here, video soon.
For the AnkerMake M5C, do you think Anker is done making 3D Printers? As a casual user I haven't heard any news from them.
I've not heard they are leaving! They did send this machine to A LOT of people for review and it got a wide range of reviews.
Thank you for the reply. I would have guessed they would be trying to mirror Bambu Labs 1 to 1.
A lot of those Bambu prices shoot right back up in a week or two. Good video aside from comparing against the sale price instead of regular!
We take the price as listed moments before recording. In the last two years, the sale price has magically become the regular price actually.
Did you record all of the clips of the clips of you lifting the printers onto the table last? It seems like you’re so much more tired after every clip. I can’t blame you I just got a good chuckle from that
LOL! Yes, I recorded that all in one take, and then just edited it down. I was exhausted at the end!
Buy and review the flashforge adventurer 5m (also buy the origional camera kit) pleassssseeeee
Okay!
Do you have any Delta style printers? I noticed there were none in your video. What do you think of them? I saw the FLSUN S1, and it looks sick!
The S1 and T1 are arriving soon, and they'll get included in the next video for sure!
Have the 400 and it is amazing.
Mingda Magician X2 unfortunately is only available for $109 in Australia. US is $209
OH NO! Did we make a mistake?! dang it.
I got the Ender-3 V3 SE and it is good!
AWESOME! That makes me so happy to hear!
Ok cool so your video is legit I have seen videos that say the same thing yet doesn’t show a single 3D printer except that 3D printer which is I think only $199💀 so thanks for the video it’s really fascinating🙂
Thank you!
@@LoyalMoses No problem buddy👍
What about p1p, p1s, and x1c?
Watch this video! It has them in it - th-cam.com/video/ForfbhJebWo/w-d-xo.html
Bummer about the Rencolor. It's a cool machine that I've thought several times would be perfect for projects I've had
Such a cool idea, just needed an updated core and it would have been a hit!
Haha!!! That thumbnail with the SV08 "Don't buy" was such a click bait... I had to watch the whole video (any time Loyal!!!) just to confirm (at 33:22), it still gets your approval Did you know? I've just reviewed the official enclosure! That machine is a beauty (not just functional...) LM team, you are the best!
haha! Got em'! Oh, how is the enclosure!? I don't have one and I would LOVE to have it and give it a try! And thank you for watching and coming by to chat!
@@LoyalMoses Enclosure: Looks stunning, works great. Admission: sometimes I stay up till 4AM (EU time) just to watch your streams. You are inspiration!
I want to see a video on the enclosure! Is it up yet?! Dude! That is awesome, and thank you! Sometimes chat goes by so fast I miss people, so sorry! Make sure to yell at me and get my attention so I can say hi next time!
Good objective buying recommendations IMO. No fan service.
Thank you! Glad you enjoyed it. I try to keep focused! :-)
@5:45 desk is actually at normal people sitting height
Height shamed... wow.
Would that desk be good for a 3D printer? I guess maybe not because it may not be stable enough for it.
Oh, it's perfect for a 3D printer! Remember the old one how it wobbled? This one is pretty awesome.
You haven’t seen the Kobra 3 yet ?
It hasn't arrived yet!
Where I live, the Bambulabs cost almost double its cost in the US. I’m torn between spending close to 2500 USD for the X1CC and 600 USD for the AnkerMake M5. Any advice on this?
WOW! That is a lot! It all comes down to what is the best machine you can get for the best price then where you live! What is the cost of the A1 where you live?
@@LoyalMoses the A1 Combo costs around 1000 USD to 1050 USD
@@LoyalMoses I love the BambuLabs based on what I see online. But the local resellers have priced it almost double if not more and refuse to give any offers even during seasonal holidays. I reached out to BambuLabs to see if someone thing can be done about this price point but they haven’t replied to any of my questions so far. It’s been over a week and BambuLabs has completely ignored my email requesting for their support on this.
@@LoyalMoses I ended up buying the AnkerMake M5. They seem to be coming up with a multiple color filament dispenser soon and their tool kit was really tempting to get. Apart from this, I’ve been a huge fan and advocate of Anker and Eyfy(another brand owned by Anker) for many years now. I trust in Anker’s quality and what really pushed me over the edge for this decision was Bambulabs lack of support or response while their products are priced that high. Anker was still 1/5 th the cost of the X1CC and kept dropping offers in my region. Now my M5 is cheaper here than in the Europe or US. Looking forward to my first ever 3D printer 🥳
I can’t recomend a1 mini enough id pay 199 per print from that thing, it’s a joy to use.
Such a good machine!
Is there another link where the Mingda Magician X2 is $109? It looks like it is only $109 in Australia, i'm in the US.
I noticed the same thing, 109 for a direct drive, dual Z, all metal hot end and injection molded parts is absolutely nuts.
That said, I'd probably never get the deal anyways since I'm in Canada...
There's a Magician Max2 available from the USA warehouse for $179 which is crazy too.
SO SORRY! It looks like we made a mistake with the pricing! Dang it!
SO SORRY! We didn't' catch that mistake before publish!
Hey what about the AnkerMake M5?
The M5C is in there, but the M5 hasn't arrived for me to test!
Everything was fine until you recommended to buy the ender.
I speak the truth and don't play on printer teams!
So sad lol when I just bought my sk1
No! Don't be sad! The SK1 is a great machine, I really like it. This was more about the price vs features and quality! There are just other machines priced more aggressively!
@@LoyalMoses Yes I’m having a great time with it other than being confused lol
You got it!
Want to see anycubic kobra 3
Me too!
I had a house fire . lost my five printers, so I'm starting over. I pick up a ender 3 .I liked the no bells and whistles.the other one I picked up is the sidewinder x3 plus. Paid 130.00 and 289.00 for them. They work beautifully. I do helmets and a lot of Halloween stuff. so you don't have to spend a grand on a printer. I am looking to get a resin printer once we are back in the house ,but that is for another day.
OH MY GOSH! I am so sorry to hear that, fires are so scary! I am glad you are okay and getting back to it.
@@LoyalMoses Thanks. We are doing well . I'm starting over things are coming along. What can be better than that new printer smell.
Would I buy?
#1- no
#2- no
#3- yes
#4- no
#5- no
#6- no
#7- no
#8- no
#9- no
#10- no
#11-no
#12- no
#13- no
#14- no
#15- no
#16- no
#17- no
#18- no
#19- no
#20- no
#21- no
#22- no
#23- no
#24- no
#25- no
#26- no
#27- no
#28- no
#29- no
#30- no
#31- no
#32- yes
#33- yes
That is A LOT of no... but, it was 3 YES! I like that!
@@LoyalMoses yeah alot of no. I am poor bring home$250-300 a week and I still wouldn't but alot of them. I have an ender 3 that was giving to me and I printed so many more for it meant don't work with it and I bought so much stuff for it to fix/mod it, I could of nearly bought an MK4. The ender 3 is still not assembled.
No love for the Ender 5 S1 😅
Can't include it if I've not had it!
34: Me
It was tiring to make this video!
criminal nkt to include time stamps
😆
The ender 3 v3 se is 169 because it takes 1000 worth of mods to make it worth anything.
No. It’s a good machine.
You can't choose a Bambu Labs A1 over a Ender 3 V3 if you have any hope of printing ABS or ASA since they shamelessly restricted the bed temp to pressure you to buy a P1P. An OG Ender 3 prints ABS... they really are the Apple of 3D printers
Nobody serious about ABS or ASA is printing without an enclosure. Also, I edited that video on a MacBook Pro M3.
why does the woman sound like AI?
Sounds like my wife to me! I think people have too much AI on their brains…
Great video. So hard to really choose but i am very happy with what i got. Love how it was 33 printers. haha
Thank you! 33 is so funny! 😆