Asu the max never stalled, it had a system that would push the nose down if the aircraft pitched too high up. Faulty sensors made the computer think the aircraft was pitching too high up, and pushed the aircrafts nose down into a nosedive
Brilliant work sir! I have over 20,000 hours in a real 737 and slightly less time flying and building models. I am in awe of your craftsmanship and talent. BRAVO!!!!
She looks so realistic in climb out and turns and that's even without decals and windows! You have become a true master, I noticed she drops a wing in either direction when you slow hyer right down as in the flair when you land - the surest way to correct that is without a doubt to incorporate slats - it's something I mentioned in one of your old videos where the same behavior was evident, it is a well know trait of highly loaded swept wings such as those of an airliner but with slats and some sort of VG or wing fence the problem almost goes away completely at least in landing - in the meantime try holding off the flare longer I know it's hard to do with such beautiful pieces of art you put so much time in to but try holding off the flare until the last minute and you will grease your landings every time it's something my instructor drilled into me.
Great job Ramy! Loved it! The third takeoff was awesome!!! It seemed to by a touch tail heavy, by the way it was handling in the turns, but wind has a tendency to make things look weird...either way, thanks for this series!
Ich hab echt die Luft angehalten als das arme Ding so in der Luft gewackelt hat. Und Du bist fies! Der arme Hund hat sich bestimmt voll erschrocken! ;-)
Dammit Ramy you are the absolute BEST! Love all of your vids and your detailed teaching info (though I could never replicate your craftmanship unfortunately). It almost seems like this 737 is actually TOO light, crazy as that sounds! Great successful maiden though and I cant wait to see what she looks like when you finish her! Would love to see the purple/orange Southwest livery on that 737!
parabéns pela construção, sua cordenação motora é muito boa pra recortar, ficou ótimo o aero, belo trabalho e videos. só uma dica, aeros escalas elétricos ñ podem vir muito devagar pra pouso, no mínimo 30% acelerado. acompanhei toda construção nos videos. muito inteligente
So enjoy your vids. And your skills. If I may be allowed to offer something that has helped me fly unique and challenging A/C, was I got myself a cheaper and still challenging low wing A/C, that i just went to the field and did nothing but approaches and touch n goes for weeks i then picked windy days and worked on my approaches and landings. What happened was i started flaring later and with less abrupt movements and with consistent approach speeds and angles. It made a huge difference in my flying. All the best and thank you for sharing your amazing journey
Amazing plane... outstanding performance..but I still stand by my words...it's missing those important Strobe Lights... Congratulations on the successful maiden flight.... Please do paint this plane with FlyDubai Livery..
Great build series and flights! Some hopefully helpful criticism I have is that you were coming in with a little too much power, that's why it wanted to keep floating down the runway. As you saw, your second and thirds landings were better because you had less power. Now I'm not saying cut the power on final approach, if you do that the plane will most certainly stall and drop. Start your approach with about the same power you were using, but as you get closer to the runway, start to bring your power back slowly. Remember, when landing a scale jet and almost any other scale model, power is used to control altitude and elevator is used to control airspeed. So the less power you have, the more the plane will want do descend. The more power, the more the plane will want to keep flying. This is exactly how the real 737 is landed. On the approach with full flaps and gear down, the power is set to around 40 percent. When crossing over the runway threshold, the power is slowly reduced to idle which slows the plane down and causes it to descend slowly. Again I absolutely love your videos and I'm just trying to help. Can't wait to see the 777 maiden!! Keep up the great work!
Wooo! Been waiting for this. Im currently doing Aeronautical Engineering at College and I really want to build an RC model A320 similar to your RC models as we have to do a project and I think it would be a great idea :D
great job again. i tried build with you but your plane came out much bigger than my project. what is the fuselage length and main wing span? i need to start over.
Hi Ramy absolutely loved tracking your build progress and watching the maiden flight and I'm amazed how well it flies for such a light plane .. I flew full size aircraft as well as flying RC planes so if I could suggest ,and I don't mean to critique your experience , because of the weight of the aircraft ,I don't know you may do this already , but when you're approaching and landing in blustery conditions favour the rudder over the ailerons and add a touch more speed . I found this worked wonders for both types of flying
Very nice job Ramy. Are you sure you have CG correct? It seems to me from glide in this video that it is tail heavy. I also build and fly, have been doing so for about 15 years.
support ✌😀 www.patreon.com/ramyrc
Ramy RC
Amazing flying and it passed test. Next flight to Florida. Lol
You're the MAN 👌🤘
Hahaha thanks John 😁
Hey ramy, when the Lufthansa Boeing 777x is gonna fly???? ☺️☺️☺️☺️
Hey ramy when do you upload the b777x?
Ramy, paint it like flydubai airlines or air canada liveries. they have the Max in operations and i think they are the best 2 liveries now for the Max
Stays in the air better than the real thing!
michael paulissen 😂
His later video shows his plane stalled just like the real thing.
Totally realistic good job ramy even lives up to its role
@@Asu01 they pitched down, they didnt stall
Asu the max never stalled, it had a system that would push the nose down if the aircraft pitched too high up. Faulty sensors made the computer think the aircraft was pitching too high up, and pushed the aircrafts nose down into a nosedive
Brilliant work sir! I have over 20,000 hours in a real 737 and slightly less time flying and building models. I am in awe of your craftsmanship and talent. BRAVO!!!!
OCnStiggs ui
It flies beautifully! Although with it being so light it does seem to fight the wind a lot. Can't wait to see it with a paint job!
Imagine being on a plane and hearing “the flight has been delayed due to cables falling out of the wings.”
Awesome build.
V1... rotaté... *7G pull, everyone passed out* 😂😂
hahaha 😂
Kkkkk so funny
MCAS failed?
She looks so realistic in climb out and turns and that's even without decals and windows! You have become a true master, I noticed she drops a wing in either direction when you slow hyer right down as in the flair when you land - the surest way to correct that is without a doubt to incorporate slats - it's something I mentioned in one of your old videos where the same behavior was evident, it is a well know trait of highly loaded swept wings such as those of an airliner but with slats and some sort of VG or wing fence the problem almost goes away completely at least in landing - in the meantime try holding off the flare longer I know it's hard to do with such beautiful pieces of art you put so much time in to but try holding off the flare until the last minute and you will grease your landings every time it's something my instructor drilled into me.
thanks man, really appreciate this comment😉
I never get tired of watching maiden flights!! Great video!!!! SHE LOOKS GOOD!!! CONGRATULATIONS!!!
Deine 737 ist wirklich sehr schön geworden und sie zeigt ein perfektes Flugbild. Applaus!
Great job Ramy! Loved it! The third takeoff was awesome!!! It seemed to by a touch tail heavy, by the way it was handling in the turns, but wind has a tendency to make things look weird...either way, thanks for this series!
thanks man, the CG actually was perfect, the wind was too much and the airplane needs some adjustments
Good! I want to see more, will you share it with us?
Very good flying in the wind, glad you got her back in one piece.
Looks amazing in the sky!
12:08 lovely shot with the real aircraft in thr background
So nice to see the joy and the fun in the flying and the genuine humbleness shown.
☆☆☆☆☆
Nice maiden Ramy.
Fantastic work Ramy! Looks great and flies a treat, awesome! Liked! :)
Always as every video ,captain Ramy saved the 737 after 2 go arounds! Awesome video, great suspense till end😅
😀✌
Your models are so amazingly correct to the scale
Nose heavy better than tail heavy - congrats Ramy I waited for this one
Thanks Darren
Ich hab echt die Luft angehalten als das arme Ding so in der Luft gewackelt hat. Und Du bist fies! Der arme Hund hat sich bestimmt voll erschrocken! ;-)
Dammit Ramy you are the absolute BEST! Love all of your vids and your detailed teaching info (though I could never replicate your craftmanship unfortunately). It almost seems like this 737 is actually TOO light, crazy as that sounds! Great successful maiden though and I cant wait to see what she looks like when you finish her! Would love to see the purple/orange Southwest livery on that 737!
thanks man :D still thinking about the livery, southwest has a big chance
The newer Southwest would be awesome! :D
Ramy RC KLM is also nice!
parabéns pela construção, sua cordenação motora é muito boa pra recortar, ficou ótimo o aero, belo trabalho e videos. só uma dica, aeros escalas elétricos ñ podem vir muito devagar pra pouso, no mínimo 30% acelerado. acompanhei toda construção nos videos. muito inteligente
Can’t wait for the 777X as well!
Incredible work, love watching your builds! Need a nice paved runway !
So enjoy your vids. And your skills. If I may be allowed to offer something that has helped me fly unique and challenging A/C, was I got myself a cheaper and still challenging low wing A/C, that i just went to the field and did nothing but approaches and touch n goes for weeks i then picked windy days and worked on my approaches and landings. What happened was i started flaring later and with less abrupt movements and with consistent approach speeds and angles. It made a huge difference in my flying. All the best and thank you for sharing your amazing journey
Ramy because of u....ur videos about the 737 have influenced me to build a mini version of yours using the same tecknigue as u use😁😁😏🙂
Awesome build! Well done.
Amazing plane... outstanding performance..but I still stand by my words...it's missing those important Strobe Lights...
Congratulations on the successful maiden flight....
Please do paint this plane with FlyDubai Livery..
Well done guys!
Wow flew like a beauty
You have done a very good job with this nice plane, congratulations 👍
Frankfurt am Main! Wunderschöne Kulisse und schönes Flugzeug ;)
Schöne Sicht auf Frankfurt:)
Can you build 1/20 747-8
sure I will 😉
Ramy RC pls do, also love your vids
Great build series and flights! Some hopefully helpful criticism I have is that you were coming in with a little too much power, that's why it wanted to keep floating down the runway. As you saw, your second and thirds landings were better because you had less power. Now I'm not saying cut the power on final approach, if you do that the plane will most certainly stall and drop. Start your approach with about the same power you were using, but as you get closer to the runway, start to bring your power back slowly. Remember, when landing a scale jet and almost any other scale model, power is used to control altitude and elevator is used to control airspeed. So the less power you have, the more the plane will want do descend. The more power, the more the plane will want to keep flying. This is exactly how the real 737 is landed. On the approach with full flaps and gear down, the power is set to around 40 percent. When crossing over the runway threshold, the power is slowly reduced to idle which slows the plane down and causes it to descend slowly. Again I absolutely love your videos and I'm just trying to help. Can't wait to see the 777 maiden!! Keep up the great work!
Nice job Ramy,flying in some difficult conditions there.
super Ramy rc airplane's engine voice is soo good . And we were waiting for this . 👌👌👌😊
Love from indonesia 🇮🇩🇮🇩 ❤
That second one was a really nice landing
Great Video Ramy!
Sometimes Ramy is funny & interesting. But he is genuine
This video pumps me up! You're an extremely talented builder. I hope one day you'll do an instructional video or sell plans. Keep up the good work!
Wooo! Been waiting for this. Im currently doing Aeronautical Engineering at College and I really want to build an RC model A320 similar to your RC models as we have to do a project and I think it would be a great idea :D
Great job Ramy!
You are so good at flying the plane
Love your videos bro ❤
I,m really love your Planes ❤❤❤
Awesome!! And very exciting, like all your maiden flights!
Ramy, you are the best!!!
Great job man
Wow! Great job Ramy
It seems pretty light :)
Amazing that's can fly . Good work ramy😉😉😉
waiting to see the 360 video 😃
great job rammy nice flight
Thats one great airplane!
Your videos and abilities are amazing !
Congrats on a truly awesome scratch build!
Brilliant job , great looking Jet .........
THIS IS BEAUTIFUL I NEED THIS RIGHT NOW!!!
How is your 777x are you gonna fly it soon I can't wait to see it fly
Kick him some pocket change to help him get the expensive jet engines he needs to get the 777 up in the air. That's all hes waiting for.
What do you think about paint the plane with Being's original lively...blue and white
Beautiful!!😍😍
Awesome job, you have inspired me to take up flying
Valeu todo trabalho na construção do aero, parabéns, voou muito bonito.
e põe trabalho nisso Zezefilmagens, acompanhei todos os videos. um belo trababalho
Awesome Dude... Needs a gyro to assist on the bumpy flight...
Great maiden. Congratulations
great job again. i tried build with you but your plane came out much bigger than my project. what is the fuselage length and main wing span? i need to start over.
fuselage: 2 meters wingspan 1.7
Nice Airplane
Way to go Ramy
I love that takeoff
you got the engines for the 777x? Can't wait for its maiden flight!!
soon
Congratulations Ramy😳
Congratulations on a very successful maiden flight, looks great in the air, thank you for the build/flight videos
Rick B. aka Plastic butcher
Love the videos ramy! Keep up the awesome work
Outstanding design, you earned a sub!
Have you considered printing the 737 engines with the bottom flat like the real one?
Boeing went with the round engines like Ramy's plane with the new 737 MAX.
MegaTechpc It's still not completely round compared to an A320
Hey ramy fabulous work.
I am impressed. I very happy about it.
Make this aircraft a testing airplane so that you can test new engines on it.
great flier
Good work, to make it fly better, i think you should add weight, the wings are perfect and the profile too i is just a problem of weight!
👏👏👏 ✈❤ Well Done Ramy!!!
nice work dude. looks great!
Hey man
Your planes r amazing
But u didn't upload the 777X flight video
When will u upload it
Can't wait to see it
Отличная работа ты просто мастер
Hi Ramy absolutely loved tracking your build progress and watching the maiden flight and I'm amazed how well it flies for such a light plane .. I flew full size aircraft as well as flying RC planes so if I could suggest ,and I don't mean to critique your experience , because of the weight of the aircraft ,I don't know you may do this already , but when you're approaching and landing in blustery conditions favour the rudder over the ailerons and add a touch more speed . I found this worked wonders for both types of flying
Thanks man, still need to prove a lot of my flying skills 😅
do you know that the use of winglets on a low-mass model such as this, results in proportionally Significant Drag, at the Wingtips. cheers
Great build and flight !
congratulations, forever land with some thrust in wind condition, so difficult but you are do it nice
do you know something ramy its realy cool when you made thing and it do realy well
Very impressive. Great job and keep it up!
Please make 747-400 or crj900
Very nice job Ramy. Are you sure you have CG correct? It seems to me from glide in this video that it is tail heavy. I also build and fly, have been doing so for about 15 years.
Thanks, yes the CG is perfect, the airplane flies so good, but it was windy that day
Oh I see. Yes, wind makes maiden flights even scarier. Sounds good. Cheers!
Wuuhuuu it's flying nice work
Nice Job Ramy rc excellent
BRAVO !!!!!!! sei un artista !!!!
Amazing job aslolutely stunning ! Gs
Awesome my dude!
Nice,but what about livery?
Berry nicee good job major skills sweet flight too!!!
Please give details about the width of the body and the length of the wings.