I'm up to powering through my long avoided heroin withdrawal + catching up on my Bleepin' Jeep Episodes! Thank you for providing content that makes it easy to live vicariously through you, building bad ass shit in that bad ass gurrrrdge!
I've used that exact Lenox blade several times and I like them. While it does cut a bit slower than a thin abrasive cut off disc, it sure does last alot longer than most abrasive cut off discs. Since I can buy abrasive cut off discs in multi pack of 5 & get a multi pack discount, the cost of a single Lenox blade vs. the multi 5 pack of abrasive discs is about the same in the end. So, I can use 1 diamond blade to make 1000 cuts or use 5 abrasive discs to make 1000 cuts for about the same overall cost. But, I definitely prefer using the Lenox blade and I've found it to have two advantages over abrasive discs. One advantage is, although it still produces metal dust, it doesn't also produce the dust of an abrasive discs wearing down. The other advantage, and the main reason I prefer them, is that the diamond blade starts out at 4.5" diameter & is still 4.5" diameter when it finally wears out. That allows for the same depth of cut throughout the life of the blade, unlike an abrasive discs wearing down & it's cut depth continuously decreasing.
I have the diamond cut off wheel. And it has a directional arrow on it. And, it points the opposite of the way you have it running. I dont know if it matters, but I run mine the other way and it cuts really good.
Hey Matt a quick bargain for all your viewers. Ace Hardware has Craftsman 193 piece mechanic set for 99.99 dollars. Normally 199.99 good buy for people starting out on a budget.
I've have used the Lennox cutter extensively, seems to work best on thin gauge metal...its loud , no sparks but leaves metal shavings every were, it does last very long
I learned it is bad to park something next to fruit trees, then work on it two years later. Fruit rats live in every enclosed spot (had two nests in the dash, one under the air cleaner, one on the transmission, and lots more that I have not found yet but I can smell). Fun times.
Hey man great channel nice work... Iam getting ready to do a straight axle swap on my Sonoma and want do a vlog about it what’s a good inexpensive camera I can use.. Thanks.. the hole in the rock vids were what lead me to your channel used to live 3 hours from there..
Something is up with this video for me. At 0:26 the video locks up and wont continue. I have to skip ahead to 1:00 and everything is fine, plays without issue. Not a big issue but a little annoying.
Entertaining as always but sometimes (well, often) I think to myself, "Self, why doesn't Matt buy the right tools for the job? They're not that expensive!" You have a tubing bender but no chop saw? You don't have a set of hole saws?
I really wish you two would wear hearing protection!!! I would love to see videos from you for years to come and I am no good at sign language. :) :O :P
Dave F. Not all diamond blades are designed to be ran on machines with a liquid coolent. The Lenox 4.5" diamond blade is designed to be used on a 4.5" angle grinder without the use of coolent. There are a lot of different types of diamond blades and they're designed for a lot of different applications. I've yet to ever see a 4.5", hand held angle grinder that had a liquid coolent attachment.
Ok not sure what is up with Amazon's Math, must be Common Core Taught or something, but a single Diamond Blades is reasonable priced @ roughly 14.00 USD while a 3 Pack is 99 USD. 3 x 14 is 42 USD so where Amazon gets 99 USD for 3 is beyond me...
You know my feelings about what you did to that poor CJ so I won't rehash that but I will say that EVERYONE needs a Jeremy! Or is it the other way around...? Does Jeremy have a Matt? Like how many licks it takes to get to the center of a Tootsie Pop, the world may never know...
I'm up to powering through my long avoided heroin withdrawal + catching up on my Bleepin' Jeep Episodes!
Thank you for providing content that makes it easy to live vicariously through you, building bad ass shit in that bad ass gurrrrdge!
I've used that exact Lenox blade several times and I like them. While it does cut a bit slower than a thin abrasive cut off disc, it sure does last alot longer than most abrasive cut off discs. Since I can buy abrasive cut off discs in multi pack of 5 & get a multi pack discount, the cost of a single Lenox blade vs. the multi 5 pack of abrasive discs is about the same in the end. So, I can use 1 diamond blade to make 1000 cuts or use 5 abrasive discs to make 1000 cuts for about the same overall cost. But, I definitely prefer using the Lenox blade and I've found it to have two advantages over abrasive discs. One advantage is, although it still produces metal dust, it doesn't also produce the dust of an abrasive discs wearing down. The other advantage, and the main reason I prefer them, is that the diamond blade starts out at 4.5" diameter & is still 4.5" diameter when it finally wears out. That allows for the same depth of cut throughout the life of the blade, unlike an abrasive discs wearing down & it's cut depth continuously decreasing.
I love it when Jeremy comes over!
Pro tip: you can watch movies on Flixzone. Me and my gf have been using it for watching a lot of movies during the lockdown.
@Allan Quinton Yup, been using Flixzone} for months myself =)
Whoooah,,,,all that drilling almost made my sticker peck out!!!! That a way to go up in it!! DEEP & HARD 😆😋 good job guys! (LOL)
Was anyone else keeping an eye on the liquor bottle? I kept hoping to see it over half empty at some point.
Matt, have you ever been out to URE in NC? It's not as extreme as other places, but it's still pretty fun. th-cam.com/video/7Z5jrEpQP9A/w-d-xo.html
I have the diamond cut off wheel. And it has a directional arrow on it. And, it points the opposite of the way you have it running. I dont know if it matters, but I run mine the other way and it cuts really good.
im not gonna *touch* the jokes with the wood, jack & drill 🤣
Use a porta jack and a 2x4 off the floor to bend the roof pillar out. Angle the 2/4 to get the right angle for the 2x4
Jeremy is a funny man.....
Jeremy "yer deep enough now just use the tip and woller it out" LOL! 🤣
You’ll make it work! Keep em coming!
Hey Matt a quick bargain for all your viewers. Ace Hardware has Craftsman 193 piece mechanic set for 99.99 dollars. Normally 199.99 good buy for people starting out on a budget.
I've have used the Lennox cutter extensively, seems to work best on thin gauge metal...its loud , no sparks but leaves metal shavings every were, it does last very long
"I was on a ladder with a chainsaw earlier" 😂😂😂
love the build keep it up!
I tried not to but my mind went to a dirty place when y’all were drilling that hole. I’ve got a twisted sense of humor.
Jacob 8696 "just the tip and woller it out".
bigdave1029 I lost it at that point
I learned it is bad to park something next to fruit trees, then work on it two years later. Fruit rats live in every enclosed spot (had two nests in the dash, one under the air cleaner, one on the transmission, and lots more that I have not found yet but I can smell). Fun times.
Hey man great channel nice work...
Iam getting ready to do a straight axle swap on my Sonoma and want do a vlog about it what’s a good inexpensive camera I can use..
Thanks.. the hole in the rock vids were what lead me to your channel used to live 3 hours from there..
Once the hole was drilled you could have torched it to waller it out. Good vid sir, good vid.
Looking good
Is that a pipe-bender or a machine gun? They sort of sound the same...
Something is up with this video for me. At 0:26 the video locks up and wont continue. I have to skip ahead to 1:00 and everything is fine, plays without issue. Not a big issue but a little annoying.
Hmmm, Doesn't seem to be happening For every body else
Yeah i dont see anyone else in the comments with the issue, must be on my end.
Is Quentin Tarantino directing this project...
He wishes he was. ;)
The intro was giving me Mr. Rogers flash backs for a second
Is that Jeremy's beverage of choice on the work bench?
Rob B Hahaha.. it was a gift that I was given that day so we busted it out and gave it a sample!
Bleepin Rose
👍
Your friend is awesome!! Buy that man a beer!
Love the Lenox blades
Your buddy went face first to the reciprocating saw during the last minute. He's lucky he didn't f up.
Prequel to Deja Vu?
can I put a lift 5 on the cherokee without changing the pitman?
Anything is possible but not reccomended
Ok thx ;)!
Good stuff!
No notification and still 3rd comment...take that TH-cam 😎👍
Jesus matt you were a sweatin son !
Entertaining as always but sometimes (well, often) I think to myself, "Self, why doesn't Matt buy the right tools for the job? They're not that expensive!" You have a tubing bender but no chop saw? You don't have a set of hole saws?
Do you have a 1 5/8" forstner bit with extension? Neither do I, but we still got the job done.
I really wish you two would wear hearing protection!!! I would love to see videos from you for years to come and I am no good at sign language. :) :O :P
Diamond blades need to be liquid cooled
Dave F. Not all diamond blades are designed to be ran on machines with a liquid coolent. The Lenox 4.5" diamond blade is designed to be used on a 4.5" angle grinder without the use of coolent. There are a lot of different types of diamond blades and they're designed for a lot of different applications. I've yet to ever see a 4.5", hand held angle grinder that had a liquid coolent attachment.
So this is a filler video with footage from many different days? I already watched you fix the corner of the cab.
Yea I was thinking the same thing. Kinda like watching a rerun.
See description
BleepinJeep damn descriptions..they are always so stinkin smart!
At 4:05 does anyone else see a face in the inside of the dent in the roof?
I put a drill bit through my finger it is no joke glad it was not my eye
Ok not sure what is up with Amazon's Math, must be Common Core Taught or something, but a single Diamond Blades is reasonable priced @ roughly 14.00 USD while a 3 Pack is 99 USD. 3 x 14 is 42 USD so where Amazon gets 99 USD for 3 is beyond me...
"Salty caramel" oh ya!
Shoulda tried a spade bit.
Ladder and a chainsaw..yea..been there, done that.
Make a dent not a dent while trying trident.
You know my feelings about what you did to that poor CJ so I won't rehash that but I will say that EVERYONE needs a Jeremy! Or is it the other way around...? Does Jeremy have a Matt? Like how many licks it takes to get to the center of a Tootsie Pop, the world may never know...
Deja vu
+
early!
#wallered #out
Why do you not upload things in order? You are really throwing me off and wishing things were moving forward, not backwards in time...