Stone Restoration SandBlasting paint removal Restore
ฝัง
- เผยแพร่เมื่อ 12 ก.ย. 2024
- This video is about SandBlasting paint off stone to restore them to natural condition
#relaxing #satisfying #restoration
As always thanks for watching much appreciated!
Hard doing for easy viewing :)
If you are a blaster and require help please drop me a message on here. PLEASE don't email or call asking advice on how to setup or operate your Rig. I need to prioritise my free time doing work calls, emails and quote enquiries. I will always try to respond to comments on my videos :)
kind Regards
Mick Blackley Sandblaster
MobileBlasting.co.uk
M.Blackleys.MobileShotBlasting
#satisfying #chill #relaxing
#satisfyingvideo #satisfyingvideos #supersatisfying #relaxing #chill #chillout #chilling
Nice one Mick good video thanks , hope the new machine is going well 🚜🚛🚜🇬🇧🇬🇧🇬🇧
1 thing I do no about it it likes a drink of derv 😬
I agree with you about the farrow flow , If it was a hundred quid i would take a punt but its a lot of brass to lay out without an independent review by someone like you
I can almost say it will be a placebo because when ya spend that much you hope its going to do something 😂
Great job Mick. I love the look of the bricks. The compresser is a rippa mate 👌👍🇭🇲🇬🇧
😬👍 I'm hoping it's going to be a good asset now its had its blip time to get some money back out of it now 👌👍
Great job Mick. I love the look of the bricks
😎👌👍
good stuff man looks tidy, it seems like the machines faster - I know its probablies not, it's the same power as last one right? but it's probablies nice for you not to have to piss about every 15-30 mins when it conks out. glad to see it's working looks that that 1k hour service did it's job. nice one mick
It's nearly dubble the power of the last 1 but it's all restricted by the nozzle at full power I would definitely struggle to keep control of what's happening. I have plans for this year hence buying this bigger rig just I won't spoil too much just have to keep watching 😅 looks like it's sorted pal I still need to run it on full demand under full load before I know for sure but I haven't had any issues with it this job 🙏
Nice one , glad you fixed your compressor. Started checking out different compressors when I see gas board etc working out and about 😬.🙏😊
Hopefully it will be a good asset. Road works only use 140cfm units finding stuff that's big enough for blasting is like finding hobby horse shit 😂
I know Scott he’s a good sandblaster here in Australia and he recommended your channel.
Good man hope you enjoy as much as Scott 😎👌
Looks a smashing job. Whats average cost to do a large detached property?
For Business Enquiries Please Email Info@MobileBlasting.co.uk Regards Mick
I watch on my Telly *still shouting at telly O COME ON 😁The cooler you need could try one of them crowd fund things
😬 they are about £4k +vat 😳 I have a something similar but I'm fairly sure it needs filters and it's was bought to go along side my 260cfm I would need to check if it can cope with 425cfm
@@Mobileblaster 4K Ouch, That only a Morning work I guess :D
Glad to see u back at it how’s compressor going
Thank you Since its service its like a brand new old en 😂😊
Sand must be blocked/Wet ! - That's water that's coming out the nozzle i reckon
Water don't remove anything it will only suppress the dust made with media. With this setup anyways. Water at higher psi and a direct nosel would cut but not like this 👍
Our does the same, a lot of moisture to start with but clears it self after an hour, its a pain in the arse.
Next one we buy will have to have a cooler
I always said I would never go back but I had to take something as all I could find is a load of crap or over priced haha I do have a la-man filter I can try :)
Hi Mick, would you recommend this method (sand blasting) for the cleaning up off bath limestone building? For example where the limestone has started to go darker and black in places? Thanks
It depends chemicals can do a good job but limited to how clean they can get the serface were as blasting is abrasive and needs a skilled operator not to damage the soft stone but in the right hands I would recommend blasting over chemical 👍
Aye, mind I was having all problems way back at the start, that was because I didn't have the aftercooler. It's totally impossible to regulate anything and end up using twice as much grit too. Do you no still have that coalescing filter that you showed me once? It might help
Funny you ask that as its was in the van and I was going to pipe it up but after an hour or so it started to flow nearly. I didn't have my box of tricks to change the fittings to make it work anyways 😅
Our mothers house needs this treatment. Do you work in Wiltshire?
sorry no
Looks like a john deere motor with the turbo? had my 260 for 16 years, ran faultlesly, oil changed every 100 hours, diesel filters changed every 25 hours, i put a cheap fram replacement filter head on, so a couple of quid to change, and a 50p inline filter, moral of the story is.... keep those diesel filters changed!!!
my 260 Service intervals are every 250 hours 1000 hour service is oil air separator and belt
this 425 is John deer and Service intervals are the same specified by doosan I do have spare air filters and change these as and when needed they like to eat dust haha
Mick did your 771 have a drier on it then?.. the 7/120 has no drier ?
Yeah its not a dryer as such is a cooler cold air is easier to dry in a water trap also cold air is nicer on the pot/pipes etc yeah my 71 had a cooler I don't fink it's worth ripping it out to put on the 120 as 71 is 260cfm and it was factory fitted 120 is 425cfm I would say it wouldn't be man enough it did cross my mind and I will definitely revisit the idea if I cannot live with this 😀
Mike can you put the cooler from your author compressor on this new one? Is that possible.?
I don't fink it would be cut out to do the work needed as the last rig is 260cfm and this is 425cfm I was going to give it a go but wanted to make sure it's faults are ironed out before investing anymore money into it as I would need a complete re plumb on the air end side on both rigs to make it work
Hi Mick. What is the maximum pressure bar your compressor working?
8.6 bar is its working pressure it would go to 12bar but not safely its best to stay in its safe working load I only need 7bar at the nozzle I need flow more than psi
Can you fix the after cooler from your old compressor
I can but I don't know if it's worth doing as it's designed to work at 260cfm and the new 1 is 425cfm I don't know if it would cope plus I don't really want to rob bits off the old 1 as it only needs a ECU and I can have a decent backup plan
Can you use the cooler of the old unit Mick .
Yeah but I don't know if it will cope as that's designed to work at 260cfm and this is 425cfm plus I don't want to make the old 1 too far gone to repair as it is I only need a ECU for it and I've got a good backup plan
@@Mobileblaster food for thought Mick for the ECU try out car/van ecu repairs may work out cheaper
@Mohammad Omar it's a sealed unit mate I cannot get into it 🤔
Hello firend my name is viswanathan from Tamilnadu india. Have a blaster job vacancy
Hi sorry not at the moment 👍
Q: What do you do for a living?
A: I make ASMR videos.
Whats ASMR stand for?
@@Mobileblaster my bad i just meant satisfying. Good vids
@michael teague 😊👍
Чтото слабенько дует
🤔