Thanks so much for your video. I was able to complete the battery replacement and the Onyx 3 is working like new again. Purchased it at least six years ago and it's been a big help allowing me to play high quality music on location photo shoots!
Tip: incase you didn't notice, the screws of the outer casing are a little different then the ones for the battery casing on the Onyx 4, so make sure you keep them seperated. EDIT: worked like a charm on an Onyx 4! Same screws and plugs and stuff. Haven't charged it yet, because the battery was like 70 or 80 percent full!
Best video out of all of the ones available I found as the hardest part was trying to find where the speaker grill connected to the rest of the speaker to pry it off.
I was able to take it apart as you illustrated. Thanks! It really surprises me that a product of this reputation and quality would have a battery that seems kind of inferior, you know?
Nicely done. Thank you for sharing. It's nice to know it's just an 18650 battery. However if I ever open it up I would add one or two more in parallel to create a longer lasting battery at the same 3.7 to 4.2 volts. Just using their same connector with cells ripped out of a old laptop battery.
Thanks so much Dale. Well made video instructions which made it easy and understandable to install a new battery in my speaker. The battery I ordered did not come with cushion tape wrapped around the wires of the battery but I was able to unwrap the tape on the old battery and re-use it along with a little electrical tape. Thanks again!
Hi Dale, so I've seen a couple of vids on the "how-to", but no comments on the the outcome and workability. The only batteries I could find were a different model number (will take up issue with HK, finding my Onyx has a non-HK battery!) so hoping it works. Please post your new battery's operating capacity. Thanks again and am awaiting my battery delivery today. 👍🏽
Did it work? I just removed the batterypack, new one should arrive tomorrow. Hopefully it works, new pack cost about 30 bucks, but a new onyx like 200, so worth a shot replacing the ffing battery.
Thanks a bunch! The seems super small, did a replacement hold up and hold long does it hold a change while using fully changed without unplugged from the AC adapter?
Hello Sr, do you know wgare can we get the replacement speakers for those HK bluetooth speakers, I have the Onyx2 and one of the speakers cracks and needs to be replaced, Thanks for you help!
Hi Ricardo, unfortunately I don’t know where we could get a replacement speaker, but I haven’t tried to look as mine are doing OK. I’ll look for replacements and get back to you if I find some. Thanks for the question, you never know when mine might start buzzing too.
Hi Joe, the wire if for the battery doesn’t lend itself to connecting two batteries together. However if you get two rechargeable batteries of the same voltage and amperage theoretically you can wire them together for a longer playtime. I’m not sure if they would charge correctly with the supplied charger though. If you decide to try it, let me know how it works, or what troubles you ran into.
I have 5 of those rubber screw covers...are you sure one of them wasn't still attached to the front grate? One of mine was. Also, why not put the band on before the front grate? Thanks though! Much appreciated for the name of the battery company.
Thanks for the reply, Phyllis. I guess I was missing one grommet, glad you had them all. Regarding the rubber seal/band, it tucks in between the grate and the case, so I found after doing several of these replacements, that the way I showed was quicker and easier for me. Of course if you don’t have my fat fingers it might be easier a different way for you. Send me a short vid of how you did yours if you have the time. Thanks again, Dale
Sorry to hear replacing the battery didn’t solve your problem. Is there a way you can check and see if your charger is working. I had to replace one of mine when I lock it in a move. Does the the speaker still play when the charger is plugged in?
That's great and all, only you could have not hide with your hands what you're actually doing, would be great to actually see how you're opening the speaker...
Hi guys, i replaced the battery of my harman kardon onyx studio 4 with a subtel 3000 mah battery, but still turn off when i set the volume up, can you pls help me?
Thank you soooo much!!!! I felt like you were my dad coaching me through this! I can’t believe I fixed my speaker by myself 🥰😁
Thanks so much for your video. I was able to complete the battery replacement and the Onyx 3 is working like new again. Purchased it at least six years ago and it's been a big help allowing me to play high quality music on location photo shoots!
Tip: incase you didn't notice, the screws of the outer casing are a little different then the ones for the battery casing on the Onyx 4, so make sure you keep them seperated.
EDIT: worked like a charm on an Onyx 4! Same screws and plugs and stuff.
Haven't charged it yet, because the battery was like 70 or 80 percent full!
Thanks Dale, a lot ! Very accurate and relevant explanations !
Best video out of all of the ones available I found as the hardest part was trying to find where the speaker grill connected to the rest of the speaker to pry it off.
I was able to take it apart as you illustrated. Thanks! It really surprises me that a product of this reputation and quality would have a battery that seems kind of inferior, you know?
Thanks so much for the video. I could not find anything near as helpful as this!
There are a couple videos out there now, but yours was excellent. Good to hear a voice talk about what to do, and showing at the same time.
Glad you enjoyed it!
Hi Dale your instructions worked a treat thank you
Nicely done. Thank you for sharing. It's nice to know it's just an 18650 battery. However if I ever open it up I would add one or two more in parallel to create a longer lasting battery at the same 3.7 to 4.2 volts. Just using their same connector with cells ripped out of a old laptop battery.
Helped me a lot thank you!!💯
Thanks for showing the steps. It worked just fine!
Thanks for your great tutorial video on model iii Dale!
Good job! Im gonna do my pair this weekend!
I need to replace the battery not sure what size I need or what to get
Thank you for posting this!!! Extremely helpful. :)
very helpful, maybe position your hands from blocking cameras but still good
Hello sir. Is it possible to just upgrade the battery by adding more? Thanks
Thanks so much Dale.
Well made video instructions which made it easy and understandable to install a new battery in my speaker.
The battery I ordered did not come with cushion tape wrapped around the wires of the battery but I was able to unwrap the tape on the old battery and re-use it along with a little electrical tape.
Thanks again!
You don't need to take the band off, and there should be 5 rubber, not just 4.
Thanks for the video.
Thanks you so much, Dale!!!
Is there a way I can modify the charger for my Harman Kardon because my charger got stolen?
Thanks for doing this.
Thanks 4 the video.
Thank you very much...
Thanks !! Very usefull
Thanks !! big help
Some one connect the wrong adapter and burn little components so not sure if the part is available or the whole module
谢谢
Hi Dale, so I've seen a couple of vids on the "how-to", but no comments on the the outcome and workability. The only batteries I could find were a different model number (will take up issue with HK, finding my Onyx has a non-HK battery!) so hoping it works. Please post your new battery's operating capacity. Thanks again and am awaiting my battery delivery today. 👍🏽
Thanks. Nice Review!! I have a Studio 4 and my battery prolly last 30 minutes off a full charge so I need to try this
Did it work? I just removed the batterypack, new one should arrive tomorrow.
Hopefully it works, new pack cost about 30 bucks, but a new onyx like 200, so worth a shot replacing the ffing battery.
@@_Roboute_Guilliman_ yes it did!! So far so good
@@DaBoss86 nice! 👍🏻
i have one that freaks out and dies immediately 😂 and it makes awfulllll awful hissing, crackling and scratching sounds before it does.
@MrRelevance02 yeah the new battery didn't really make difference 🤦🏿♂️
Thank you💯👍
Thanks for this tutorial. I have a studio 2 but I'm thinking everything's the same.
I hope everything’s the same
Where can order the replacement battery? Tnx
Can u send me the link to buy the battery.. I'm from England.. And I have a onyx 4
Hi can i buy from you the main board
Thank to your video I could do it. Thanks a lot. M.👍👍
Thanks a bunch! The seems super small, did a replacement hold up and hold long does it hold a change while using fully changed without unplugged from the AC adapter?
Thanks for viewing and sending a question. The new battery is still working well. Holds a charge for almost 8 hours of playing before being recharged.
No test?
Hello Sr, do you know wgare can we get the replacement speakers for those HK bluetooth speakers, I have the Onyx2 and one of the speakers cracks and needs to be replaced, Thanks for you help!
Hi Ricardo, unfortunately I don’t know where we could get a replacement speaker, but I haven’t tried to look as mine are doing OK. I’ll look for replacements and get back to you if I find some. Thanks for the question, you never know when mine might start buzzing too.
@@dalestonebraker2208 Thank You Dale! I hope you find it and let me know, Best!
Very Tnx Nice video help :)
Good..
Can I have the address for the company at California to get battery for my harman /kardon :please:
Thanks for watching. The battery I found on EBay. It’s part number
PR-633496. The seller was henzens-2017. Let me know if you need any more info.
How did u knw the battery needed to be replaced
I’m my case, the speaker wouldn’t take a charge. In fact it wouldn’t even work when plugged into the wall for power.
Same exact problem I'm having so Ill be changing the battery also.. thanks a 1,000,000
I am having trouble keeping the speaker on. I turn on and like ten seconds later or less it shut back off.
That is happening to me right now
same here also.. I'm thinking it the BATT
Could you connect 2 batteries together?
Hi Joe, the wire if for the battery doesn’t lend itself to connecting two batteries together. However if you get two rechargeable batteries of the same voltage and amperage theoretically you can wire them together for a longer playtime. I’m not sure if they would charge correctly with the supplied charger though. If you decide to try it, let me know how it works, or what troubles you ran into.
check this video th-cam.com/video/z9o7SAtDcJI/w-d-xo.html
Thanks for the Video, Could you tell me the number part of battery and when can I buy it?
Thanks for watching. The battery I found on EBay. It’s part number
PR-633496. The seller was henzens-2017. Let me know if you need any more info.
Mine didn't light the power button like yours did @ 10:55‽ 🤔😫
I have 5 of those rubber screw covers...are you sure one of them wasn't still attached to the front grate? One of mine was. Also, why not put the band on before the front grate? Thanks though! Much appreciated for the name of the battery company.
Thanks for the reply, Phyllis. I guess I was missing one grommet, glad you had them all. Regarding the rubber seal/band, it tucks in between the grate and the case, so I found after doing several of these replacements, that the way I showed was quicker and easier for me. Of course if you don’t have my fat fingers it might be easier a different way for you. Send me a short vid of how you did yours if you have the time. Thanks again, Dale
!mine doesn't want to charge... It Sparks lightly when I plug it
Sorry to hear replacing the battery didn’t solve your problem. Is there a way you can check and see if your charger is working. I had to replace one of mine when I lock it in a move. Does the the speaker still play when the charger is plugged in?
Where is the link for the battery
Thanks for watching. The battery I found on EBay. It’s part number
PR-633496. The seller was henzens-2017. Sorry I’m not aware of how to do a link.
That's great and all, only you could have not hide with your hands what you're actually doing, would be great to actually see how you're opening the speaker...
That looks like a studio 4
10:40 haha makes me think of Ray from TPB
great video by the way, super helpful
Hi guys, i replaced the battery of my harman kardon onyx studio 4 with a subtel 3000 mah battery, but still turn off when i set the volume up, can you pls help me?
If anyone is looking for the replacement battery for the Onyx Studio “4”, you can find it here: a.co/d/9BaOJJY
If someone is looking for the replacement Battery for the Onyx 4, then here is it is: a.co/d/9BaOJJY
Is anyone is looking for the replacement battery for the Onyx 3, here it is: a.co/d/1PCNqos