omg.....the way you explain and share complete details about everything...just love it brother...i watched rs3 pro detailed review and this tilta hydra mini arm review....for sure ill watch every video you shared....keep inspiring thank you so much
Out of all the youtubers, they picked the best one for the subject. Nice one, Adam! Thanks! And your lovely wife did a great job on the protective cover!
Yes, long raw footage is what I want to see! I'll say that putting on R2 is a bit too much for the arm...? I can see small shakes due to hitting the swing limit, but the footage is really useable!
Yes it is true, you can see a slight vibration but it was the result of bad settings in ronin 2, remember it was the first test drive with ronin 2 pro. After adding strength to the motors and advanced settings (filters, smothness etc) everything was smooth 💪
@@BestboyAdam Cool! Now I am wondering if you setup the arm shorter, then it should means that the payload could be larger than 10kg? This opens up more possibilities and makes the rig safer in a weird way.
oooo yes, for sure. I just need to calculate exactly how much the payload will be then but I need someone more knowledgeable to do that 😅 As soon as I find out I'll let you know
Thank you sir! Very interested in the fact that you were able to shorten the arm by leaving out a section, and I'm curious about that shield you have mounted behind the 4d, presumably to protect from debris and wind.
Greetings, how did you manage to control the Rs3 ronin with the crane control? Could you tell us what module to buy to be able to control the Ronin from the crane control? Excellent video, greetings from Mexico
Thanks for this useful review. Did you measure the power draw of the arm? Tilta's website says 1800wH, but watt hours is a measure of capacity not power, and 1800W seems a bit high. Thanks!
Also, I have another question if you don't mind. How slowly can you set the arm to move? ie if you set the speed to the minimum, how fast is it? Thanks!
I still have problems sometimes with the Alien Arm, sometimes the RS2 starts to wobble the pan axis slightly and that infuriates me. Even with the motor strength at its minimum
I hear you. I think it's an RS2 problem, first time I ever tried the Hydra Alien we used an old Ronin MX and that thing was rock solid. Need to do more tests but I suspect the RS2 is not up to the task.
6:58 that is not the way the strap goes in to the ratchet! The belt should always enter the ratchet from outside and leave through the inside. That way it is much easier to undo the ratched when you want to remove it.
Please which ECOflow model did you use, Tilta has no power block recommendations and when I called ECOflow the lady I spoke with did basically recommended a 2 block system for any 220v usage
Awesome, my first question was going to be; what do you think of putting the Ronin 4D on it? I'm still waiting on my Nanomorph lens set. I can't wait to try it out on the Ronin 4D.
At this point, would you not think a Drone is a more versatile pick ? You can get way more creative shots compared to a camera car. The only limiting factor is Payload Capacity and Max Speed, depending on your rig
It should not be depending on what you are doing... you should have someone on the arm qualified at all times this is not a jimmy jib. You are asking for trouble by saying anything otherwise.
@@BestboyAdam Your statements are worrying, i can understand your passion in wanting to achieve great cinematic shots but on this occasion you are out of order suggesting what you did.You are putting people's life at risk, i do this for a living and it annoys me when film equipment is not used in a safe way. End of the day we all want to achieve great shots but not at the cost of human life, which unfortunatley has happened too many times.
@@mariospanna8389 woooow I will honestly tell you that I don't know what to tell you. Tell me, did you even take the time to watch the whole video or are you just taking isolated sentences out of context? I put a very strong priority on safety and I mentioned it several times in this episode so I have no idea why you accuse me of such things as risking people's lives???? dude come on.
do you mean the moment in the video where I say that anyone can do it and everything can be learned or what because I really don't understand your charge about inviting people to take risks ???
@@BestboyAdam "A two person team will be able to take the simplest shots" yes i did watch all your video is this not what you said? . I am not taking anything out of context, anyone who makes that statement and defends it is taking risks.
Fantastic review. Thanks for taking the time to deep dive this equipment, and heavily emphasize the importance of safety with this type of gear.
thank you Blake 💪
Thank you for the opportunity to help you with the recordings... it was an amazing day at the track ✌🏻 9:59 see you soon 🎬🏎️
omg.....the way you explain and share complete details about everything...just love it brother...i watched rs3 pro detailed review and this tilta hydra mini arm review....for sure ill watch every video you shared....keep inspiring thank you so much
thx man
Dear Adam, always a pleasure to watch you at work. Thanks for all your good work. Keep it up in 23!
thank you Oscar !! 💪
You put so much work in your vids I thank yóu. Additionally, incorporating family life is much appreciated. Greetings to the misses and kids ;-)
U-crane is top!
Out of all the youtubers, they picked the best one for the subject. Nice one, Adam! Thanks!
And your lovely wife did a great job on the protective cover!
Thank man !! Great to hear that 💪
you are always the best, clear, good instruction, thank you
my pleasure man !!
Adam best boy- THE GO TO PRO !!! 🎥🖋💪🏻💪🏻💪🏻🇮🇹
😍😍😍
Great video as always! I really appreciate your perspective on gear like this!
Justin 💪
@@BestboyAdam Amazing pice of tech and gear, also nice review with a lot of useful tips !!! Greetings from Ukraine !
I love your reviews! I wish you all of the success in the world and I hope one day to work with you!
I wish I saw such a video with so many interesting details shown and mentioned when I was designing similar arm as my Engineering Thesis
Yes, long raw footage is what I want to see! I'll say that putting on R2 is a bit too much for the arm...? I can see small shakes due to hitting the swing limit, but the footage is really useable!
Yes it is true, you can see a slight vibration but it was the result of bad settings in ronin 2, remember it was the first test drive with ronin 2 pro. After adding strength to the motors and advanced settings (filters, smothness etc) everything was smooth 💪
@@BestboyAdam Cool! Now I am wondering if you setup the arm shorter, then it should means that the payload could be larger than 10kg? This opens up more possibilities and makes the rig safer in a weird way.
oooo yes, for sure. I just need to calculate exactly how much the payload will be then but I need someone more knowledgeable to do that 😅 As soon as I find out I'll let you know
yes sir let's get it! Always on the scene when you drop a new video!!
buddy FX 💪 thx
Great review!
thx Jake
Thank you sir! Very interested in the fact that you were able to shorten the arm by leaving out a section, and I'm curious about that shield you have mounted behind the 4d, presumably to protect from debris and wind.
You mean the obvious plastic box?
Yes that's right, it's protection from dirt and water from under the wheels. I made it out of the simplest $2 plastic tool box
@10:47 That plastic bin for camera back will put the stress on the arm due to wind resist.
Greetings, how did you manage to control the Rs3 ronin with the crane control? Could you tell us what module to buy to be able to control the Ronin from the crane control?
Excellent video, greetings from Mexico
Absolutely fantastic as always brother! Love how you show the history of the "Ukrainian Arm". Well done brother. 🙏🏼🎥
Thank you Johny !!
Awesome review.
thx 💪
Thanks for this useful review. Did you measure the power draw of the arm? Tilta's website says 1800wH, but watt hours is a measure of capacity not power, and 1800W seems a bit high. Thanks!
Also, I have another question if you don't mind. How slowly can you set the arm to move? ie if you set the speed to the minimum, how fast is it? Thanks!
I'll have to check, I'll let you know in a few days
@@BestboyAdam much appreciated
I still have problems sometimes with the Alien Arm, sometimes the RS2 starts to wobble the pan axis slightly and that infuriates me. Even with the motor strength at its minimum
I hear you. I think it's an RS2 problem, first time I ever tried the Hydra Alien we used an old Ronin MX and that thing was rock solid. Need to do more tests but I suspect the RS2 is not up to the task.
As always amazing.
Hello,
is there need to have adapter to setup with a Ronin R2 ?
thank you very much and great review !
🙂
6:58 that is not the way the strap goes in to the ratchet! The belt should always enter the ratchet from outside and leave through the inside. That way it is much easier to undo the ratched when you want to remove it.
nope, you're wrong, check your strap manual
@@BestboyAdam I have been a truck driver for years. But okay.
I love this such a smooth rig
Please which ECOflow model did you use, Tilta has no power block recommendations and when I called ECOflow the lady I spoke with did basically recommended a 2 block system for any 220v usage
Awesome, my first question was going to be; what do you think of putting the Ronin 4D on it? I'm still waiting on my Nanomorph lens set. I can't wait to try it out on the Ronin 4D.
It is protection from dirt and water from under the wheels. I made it out of the simplest $2 plastic tool box💪😀
@@BestboyAdam, I think you may be single-handedly ushering in a renaissance of indie filmmaking :)
Blimey, they didn't even get the alien right and they're just forging on!!
Hi, can we use honda mini Generator for power supply?
ive waited so long for this#
me too 😀
Hi i have a question the eco flow2 how much autonomy give to te arm?
DJI inside 🤣 Thanks for that test!
💪 😀
I like your chanel, thanks for Video 🤙
Their website is broken, the social media of the company is gone .... what's the deal ????? Any news about it ?
Do you have the Final footage of your projects with this equipment?
Hi, What is the speed limit for using this material?
Cool !
At this point, would you not think a Drone is a more versatile pick ? You can get way more creative shots compared to a camera car.
The only limiting factor is Payload Capacity and Max Speed, depending on your rig
2 underage workers and only 1 screw-driver. The frustration is real! lol
👏🏾👍🏾🙏🏾
" Poli...." (means Awesome in my Malayalam Language )
Dziękuje _poland Language means Thank you !!!
lets goo Poland
Cant wait for the videos of people buckling their roofs.
鐵頭的產品 很酷
*TUUUUUUTTT...
Cant yoy just use a drone
Ересь, нет не какого украинского крана
Even in Harry Potter they’re not saying name of „You-Know-Who”. Respect for that BestBoy ❤
dengoogle, forgive me, I don't understand 🤔
Oh yeeeeee, you need this because drones dont exist?
It should not be depending on what you are doing... you should have someone on the arm qualified at all times this is not a jimmy jib. You are asking for trouble by saying anything otherwise.
yeah right, it's not jimmy jib. It's much easier to use. And qualifications are the easiest and fastest to gain by experience right?
@@BestboyAdam Your statements are worrying, i can understand your passion in wanting to achieve great cinematic shots but on this occasion you are out of order suggesting what you did.You are putting people's life at risk, i do this for a living and it annoys me when film equipment is not used in a safe way. End of the day we all want to achieve great shots but not at the cost of human life, which unfortunatley has happened too
many times.
@@mariospanna8389 woooow I will honestly tell you that I don't know what to tell you. Tell me, did you even take the time to watch the whole video or are you just taking isolated sentences out of context? I put a very strong priority on safety and I mentioned it several times in this episode so I have no idea why you accuse me of such things as risking people's lives???? dude come on.
do you mean the moment in the video where I say that anyone can do it and everything can be learned or what because I really don't understand your charge about inviting people to take risks ???
@@BestboyAdam "A two person team will be able to take the simplest shots" yes i did watch all your video is this not what you said? . I am not taking anything out of context, anyone who makes that statement and defends it is taking risks.
Amazing review.