Today we get "BAMA" ready for the First Drive in over 40 years! Check out a-premium.com - use discount code "CT10off" Thanks for supporting the channel! 😎😎😎
YEESSS! Great video, good to see you get back in the saddle with a positive spirit. Hang in there and look forward to the next one. 'Don't call it a comeback, I been here before!' (old skool LL Cool J).
Don’t replace pans….just weld in some patch pieces as best you can and make it “good enough” for a patina bug. Saves money and time. Doesn’t need to be perfect. You know….low budget type of build like most of us are doing.
I bet when you pull that engine out you will have a loose flywheel ;) Anyways thats a good engine to do a rebuild on! There is some really good step by step videos and handbooks out there and its quite fun to learn! 👍
Excellent video CT :) also welcome on message leave you always and help hints too! Also on test drive sound like something seized up and not sure to happen was loud for sure ! But at least got to enjoy a short trip test drive and see too how runs!
So happy to see you aknowledged some facts, both personal and project-wise. We all have our issues. :) Did not see you added oil after the massive leak, might be the reason the engine got stucked?
Hi CT, glad you plan on finishing the projects you want to keep. Of course there are hold ups that you still need to jump around on but just explain why. The bug sounded like something loose inside everytime you turned it off. Just take it apart and see what happened. Could have been the old cam gear shearing the rivets off or something like that. For content everyone will be interested in what broke? I don't think you took the case apart on this one so who knows?
Yes, I would like to see them again it's been a while. I've seen them a few times over the years. First time was at the Visage club in Orlando way back in 87 I think...it was a small club, really cool. didn't really know who they where until later that year when they got really big.
@@CTmoog Thanks for your reply! Have exactly the same engine and i want to replace it! Keep up the great work!! Looking forward for the next video!!!! 🙏 🙏
Wait, what actually happened? Did you not have proper oil? Or enough oil? Very strange for a running engine to seize just like that. I’ve owned many dubs and this is strange. Do you know if the engine failed or is it driveline related ?
I am confused as to what happened to the engine. Granted, I have a poor ear for assessing the health of an air-cooled VW engine with a bad exhaust/muffler. Without a good exhaust, they all sound like they are about to blow up to me! Potentially, too much end play that allowed the crankshaft to move enough to hit the block and lock up? Just ran out of oil? I’d enjoy watching an teardown video to see what happened?
Ja ja, daß kommt davon wenn man mit 3 cylinder fährt , ich kenne das Problem mir ist es nicht nur einmal passiert, bei 6 VW Käfer hatte ich diese Vorkommnisse? LG.herbst
It would be a waste of time at thins point. It needs new heater channels, a filler, b filler, etc to make it a good driver. Will come back to it after we get Georgia and the Ghia done.
Check out a-premium.com - use discount code "CT10off"
Thanks for supporting the channel! 😎😎😎
Good thing those old engines are easy to rebuild. At least you got to drive it. So excited to see Georgia back in the line up soon.
Yes, I don't really know how to build one but my buddy Darrin does! =) Georgia will be running down the road soon! 😎😎😎
A wise decision for that new shedule CT ! 👍
Can't wait to see the work again on the Karmann Ghia .
Thanks man! =)
Love a good wrenchin video. Can't wait for the next
YEESSS! Great video, good to see you get back in the saddle with a positive spirit. Hang in there and look forward to the next one. 'Don't call it a comeback, I been here before!' (old skool LL Cool J).
I like your enthusiastic outlook. Thanks for the share of energy you bring to my day!❤️❤️ ( 🌿!
Have an amazing day! 😎😎😎
Great progress CT - Keep it going, you’re doing great!
Thanks Devon!
Don’t replace pans….just weld in some patch pieces as best you can and make it “good enough” for a patina bug. Saves money and time. Doesn’t need to be perfect. You know….low budget type of build like most of us are doing.
good idea! save the pans for a better build.
CT I like your plan. You can do it!
Thanks man! 😎😎😎
I recommend a vehicle raffle for Alabama. I have no time, space, or budget for another bug but I’ll gladly take it 😂
Great job CT. So entertaining to watch!
Thanks so much! =)
Thanks so much for this video, about to re-marry my transmission and motor, really helpful!
Awesome! Thank you! Good luck!!! 😎😎😎
Gotta love it , I just replaced my oil cooler seals, not the end of the world. What a nice project.
I bet when you pull that engine out you will have a loose flywheel ;)
Anyways thats a good engine to do a rebuild on! There is some really good step by step videos and handbooks out there and its quite fun to learn! 👍
Yes,couldn’t understand why he didn’t torque it !
It’s rider’s ON the storm, no big deal 😂
Damn you’re getting good at putting those bugs together 👊.
Thank you! 😎😎😎
Great video! Great content. Simple old wrenching at its best.
Thanks 👍
Happy Sunday morning!
Happy Sunday!!! =)
Good to see that you cling permanently to your planed projects.
A name for the Karmann-Ghia could be "Carmen".
I like it! =)
With no engine and no floor pans you ought to be calling Bama... Fred! (Flintstone) 😁
😅🤣😂 - thanks! That's funny! =)
Awesome job, I am surprised you didn*t paint the housing unless you are going to do it when you check that oil leak.
Would be very interesting to make a video of you rebuilding it!
I might do that! 😎😎😎
That Wolfsburg logo on the steering wheel makes me happy
I know it’s not, but you make it look easy……
Thanks buddy!
Excellent video CT :) also welcome on message leave you always and help hints too! Also on test drive sound like something seized up and not sure to happen was loud for sure ! But at least got to enjoy a short trip test drive and see too how runs!
Be good to see Georgia up and running
Well she ran for a minute. Bet the flywheel came loose.
Yes, this engine needs a rebuild....
That was a surprise. The engine sounded great.
my Grandpa had a gascan like that too for his lawnmower
Sorry about that engine! But, looking forward to the Ghia and Porsche projects....
That is a Gland Nut for the Flywheel. 🙂
So happy to see you aknowledged some facts, both personal and project-wise. We all have our issues. :) Did not see you added oil after the massive leak, might be the reason the engine got stucked?
Nice job sir cool VW Beetle good show sir 😃👏👏👏👏👍👍👍👍
Sounded like the exhaustvalve on cyl. Nr. 3 chose to part with the valvestem and visit the combustionchamber. 😓😓
yes, that might be it...
Hi CT, glad you plan on finishing the projects you want to keep. Of course there are hold ups that you still need to jump around on but just explain why. The bug sounded like something loose inside everytime you turned it off. Just take it apart and see what happened. Could have been the old cam gear shearing the rivets off or something like that. For content everyone will be interested in what broke? I don't think you took the case apart on this one so who knows?
Alabama and Georgia frame need to get together if it is still available, it would simplify the process at a later date when you are ready.
Sach is a good brand it’s a German company I know
CT. Time 🔧
Thanks Atom! 😎😎😎
Hope you get to the Jane’s Addiction show in Tampa CT.
Yes, I would like to see them again it's been a while. I've seen them a few times over the years. First time was at the Visage club in Orlando way back in 87 I think...it was a small club, really cool. didn't really know who they where until later that year when they got really big.
Jacksonville show was awesome last night!
Bama moves at least nice running bug
That makes two of us Im near sighted too, I hate prescription eye glasses
Mustie1 sometimes has found that those Oil cooler seals need to be taller so they wont leak
yeap I concur the Oil seal on the Oil cooler is leaking for sure, not bad though
I think your next project might be a….: Chevy Corvair. The American air -cooled rear engined econobox. It’s a suggestion that’s all.
That was awesome CT!!!
turn the tube around on gas cable to carb. and on spring rids on top
Well...that was fun....till it wasn't. Be interested to see what smurffed up.
Yes, that a blast for minute.....engine is worn out most likely.
I believe that you dropped a valve in one of the cylinders that's what stopped that engine in his tracks.
pre-fit a Right hand side plexy Glass floor pan 🙂
De bug has to take a leak 😀
Is it worth getting a hoist instead of the jacks. Great work, that cars got a bit of character.
Happy Days!
Na, ich bin gespannt, wie lange es dauert, bis du wieder ein rostiges Projekt kaufst. Hoffentlich geht es nun endlich beim 914er Projekt weiter.
Why not give it a quick coat of paint while it’s disassembled..! 😮
whoa... wait a minute, did i miss the part where the flywheel was torqued?
What a bummer! More content to follow I'm sure!
Me gustó esa batería, saludos maestro.... Podría indicarme dónde comprar un libro como el que usted usa para guiarse. Gracias.
Make a Plexy Glass floor 🙂
I watch Mustie 1 he is a bug nut, He knows Darin
To slide the vehicle dish soap and an old bed sheet, should work.
haha! Sounds messy! =)
Hi My Dear Friend Very Very Great Job ❤❤❤❤❤
Good video, thx!
Good Job CT!! I really enjoy your videos!! What diameter is the clutch?? 200mm or 180mm? Thanks in advance!
Thank you! This one is the 180mm for the 40hp 1200cc engine.
@@CTmoog Thanks for your reply! Have exactly the same engine and i want to replace it! Keep up the great work!! Looking forward for the next video!!!! 🙏 🙏
@@efstratiou2015 Awesome! good luck! Thank you!
Bonjour ct vous êtes un spécialiste des moteur w w bon diagnostique
Awesome
Lindo malavioso dimais espetacular vw beetle ❤❤❤🎉🎉
the bug that pees his pants
Did you check out Ronald Fingers Restored Fiero series?
Wait, what actually happened? Did you not have proper oil? Or enough oil? Very strange for a running engine to seize just like that. I’ve owned many dubs and this is strange. Do you know if the engine failed or is it driveline related ?
Do some bloopers
It’s alive!
Engine mounts should be changed.
How much do you want for Alabama will you do some trading on it.
maybe...what state do you live in?
Oh you dont have the round bellows thermostat on those buggie engines
And take the time to power clean it before body put back on?
I am confused as to what happened to the engine. Granted, I have a poor ear for assessing the health of an air-cooled VW engine with a bad exhaust/muffler. Without a good exhaust, they all sound like they are about to blow up to me! Potentially, too much end play that allowed the crankshaft to move enough to hit the block and lock up? Just ran out of oil? I’d enjoy watching an teardown video to see what happened?
Ja ja, daß kommt davon wenn man mit 3 cylinder fährt , ich kenne das Problem mir ist es nicht nur einmal passiert, bei 6 VW Käfer hatte ich diese Vorkommnisse?
LG.herbst
not sure what happened...I will take a closer look this week.
nO STEERING EEEEEKKKK
Whatever happened to Rusty did you sell the vehicle?
when are more fiero episodes ?
Hey just shorten the frame and make a Dune buggy
when you moved before the engines was off
A driver 😮
Why would you not weld those pans in before body??
It would be a waste of time at thins point. It needs new heater channels, a filler, b filler, etc to make it a good driver. Will come back to it after we get Georgia and the Ghia done.
it should been funnier video if you had 5-60 michelin on the rims
🤣😁😂
'67?
Rug Ghia
😃😃😃
😎😎😎
Try putting it in first gear
Lee Jennifer Miller Jose Thompson Richard
👌🙌😊🍀👍
🤗❤️👍💯
Thank you! =)
@@CTmoog welcome dear CT 🤗 keep up doing the great work 💯
😃🤚🤚👍👍
Scrap remains scrap
Me gustó esa batería, saludos maestro.... Podría indicarme dónde comprar un libro como el que usted usa para guiarse. Gracias.