Would love to make some of these, but unable to find the link for the chain or the flat metal charms. Can you help us out? I may have found the flat pieces, bit have no idea what type of chain to get that will be strong enough. Thank you for any assistance you can give!😊
That turned out beautiful, I can't wait to make some, I could not find the link to the necklace pieces could you please add the link to them please and thank you.
Beautiful. Love the file you sublimated in video. The cutting board you used appears to be clear, I have not seen those at dollar tree, they usually are a cloudy top finish.
Great job so cute!!!! I’m not sure if you know this or not but did you know SS your PNG image will lower its resolution? 😥… I didn’t know that myself until I was in the Epson Sublimation group and I mentioned taking my SS that way. Thankfully a lady told me. (I checked it for myself and it actually will lower the image DPI every screen shot you take! . (That was my go to way of getting around Cricuts stupid size restriction.… But not anymore!! 😫
Great video. Not sure if it's just the pro version of Canva but if you go to position you can then put the size you want. Again, I have pro so not sure.
Wait those are different usually cutting boards have a texture. Ive been looking for those clear ones. Cant find them. Im not sure if they are cutting boards.
At one Dollar Tree I found one clear glass board and all the rest were textured on one side. At the other 2 Dollar Trees near me there were only the textured ones. The feet are on the clear side. That is the side I am applying my laminate sheet to right now (I was not sure which way to place the laminate sheet onto the glass so I put the inside (matte side) face down onto the glass. I'll update once done.
@redlover5088 nice wish u luck. I've used the textured ones and I've sublimated on the back side where yhe feet initially were. I messed up and haven't tried again but yours that u found that had no texture.... was it next to the other Chopping boards or a different section?. I'm starting to wonder if they are used for something else and maybe why I haven't seen them . Like maybe they are for candles or something? Because a non textured cutting board does seem a bit dangerous.
Am I missing something here as far as why Canva, along with every other design software out there has NO problem with printing this as well as other “larger” size prints EXCEPT for Cricut?? (I’m not trying to get off topic here it’s just this was just so simple to resize in Canva yet when I was trying to do it through Cricut I was having trouble because of the usual size limitations. At even with just this 8X8 size. ??? ….. It’s absurd!
It's because Cricut has to leave a big enough border for the print and then cut registration marks. You see those black lines at the corners? Those tell the machine how to line up the blade to cut around the image. That makes the printable area smaller. If you could do print only, then it would probably print the same as all the other programs.
Is it my imagination, or do they come out with videos doing almost the exact same crafts as Jennifer Maker a few months later? Seriously, it could be my imagination but that's definitely my impression.
✨✨ Grab our membership for only $1: makersgonnalearn.com/dollar-deal/?el=YT ✨✨
I use Rapid Tac Application Fluid when putting it on makes it sooo easy
What a fun project!
OMG how beautiful. Thank you for sharing
I didn’t see the link for the necklace pieces. Are you able to add the link
What kind if glue did you use?
I've made a few of these...they turned out really nice...nice enough for gifts
Awesome!!!
Is GOING to TAKE me long time to learn all that
an a frosted glass cutting board work and what side would you use
Wow! This is beautiful!
It really is!
What a fabulous idea. Thank you for sharing. BTW, you have beautiful fingernails. :)
Thanks for wathcing!
Would love to make some of these, but unable to find the link for the chain or the flat metal charms. Can you help us out? I may have found the flat pieces, bit have no idea what type of chain to get that will be strong enough. Thank you for any assistance you can give!😊
That turned out beautiful, I can't wait to make some, I could not find the link to the necklace pieces could you please add the link to them please and thank you.
Gorgeous! We have those blanks too! Love your works!🥰
Thanks so much! 😊
Beautiful. Love the file you sublimated in video. The cutting board you used appears to be clear, I have not seen those at dollar tree, they usually are a cloudy top finish.
My square glass cutting boards from Dollar Tree is Clear. My Circle ones are frosted on one side. They both come out BEAUTIFUL
I finally located the clear round ones at my local store. I bought all six of them in stock
Do you have the link for the necklace charms that glue to the cutting board?
Gorgeous!!❤
Thank you! 😊
love this
i clicked on the link for the heat gloves and it led me to Amazon's page for Hand Warmers Rechargeable 2 Pack.
If you use the heat press do you still have to worry about bubbles?
Do these still look good or are they foggy looking? Thank you
I don’t have the mini iron so do I use the same temp and time when pressing the laminate onto glass?
Any idea what temperature you are pressing the laminate to the blank? I don't have an easy press, but I do have a mini iron.
Great job so cute!!!!
I’m not sure if you know this or not but did you know SS your PNG image will lower its resolution? 😥… I didn’t know that myself until I was in the Epson Sublimation group and I mentioned taking my SS that way. Thankfully a lady told me. (I checked it for myself and it actually will lower the image DPI every screen shot you take! .
(That was my go to way of getting around Cricuts stupid size restriction.…
But not anymore!! 😫
Amazing
Thank you!
What's side is the laminate face down on glass cutting board?
I was wandering what do you do with the glass if you mess up. Can you reuse it
windows is hold windows button and hold shift and press s for a screenshot using snippet tool
Great video. Not sure if it's just the pro version of Canva but if you go to position you can then put the size you want. Again, I have pro so not sure.
I'm using free version. I checked and don't even see a link/icon that says "position" anywhere on the page. Must be only in pro.
What is the name of the jewelry piece you use to hang them
Wait those are different usually cutting boards have a texture. Ive been looking for those clear ones. Cant find them. Im not sure if they are cutting boards.
At one Dollar Tree I found one clear glass board and all the rest were textured on one side. At the other 2 Dollar Trees near me there were only the textured ones. The feet are on the clear side. That is the side I am applying my laminate sheet to right now (I was not sure which way to place the laminate sheet onto the glass so I put the inside (matte side) face down onto the glass. I'll update once done.
@redlover5088 nice wish u luck. I've used the textured ones and I've sublimated on the back side where yhe feet initially were. I messed up and haven't tried again but yours that u found that had no texture.... was it next to the other Chopping boards or a different section?. I'm starting to wonder if they are used for something else and maybe why I haven't seen them . Like maybe they are for candles or something? Because a non textured cutting board does seem a bit dangerous.
I have heard other people say that they turn cloudy after a few months! Is this true? Thanks
Am I missing something here as far as why Canva, along with every other design software out there has NO problem with printing this as well as other “larger” size prints EXCEPT for Cricut?? (I’m not trying to get off topic here it’s just this was just so simple to resize in Canva yet when I was trying to do it through Cricut I was having trouble because of the usual size limitations. At even with just this 8X8 size. ??? ….. It’s absurd!
It's because Cricut has to leave a big enough border for the print and then cut registration marks. You see those black lines at the corners? Those tell the machine how to line up the blade to cut around the image. That makes the printable area smaller. If you could do print only, then it would probably print the same as all the other programs.
I wish someone would build a sublimation edit app or something
I tried this with my HTVront easy press and it did not work, I even tried pressing it for an extended time. Help please!
I had no idea glass could be used as a cutting board. Seems like when the blade goes over the glass it would be like nails on a chalk board.
❤❤❤
❤
Is it my imagination, or do they come out with videos doing almost the exact same crafts as Jennifer Maker a few months later? Seriously, it could be my imagination but that's definitely my impression.