Another stunner! 🥰 Tip for the bottom... Liquid latex works wonders! Slap it on, and peel it off. Or painters tape, electrical tape works as well. Saves you from having to sand.
Ive recently bought a couple of these with intentions to either do a paint pour or resin design but not really knowing what i would do. Now i know im definately going to try this! Very classy... thankyou for sharing your talent and designs!
Aw thank you! And I definitely do NOT have a huuuge stockpile of wood trays and cutting boards to epoxy 🤣🤣🤣 lol Everytime I go to Ross or TJMaxx I have to look for more! Thank you so much for watching! 💕💕
After watching a number of marble effect resin videos I decided to try yours as not only did you get a great effect but you explained it well too. I’ve never done it before so I wonder if I make or break my latest project? Thanks for sharing…. New sub…….. Know Expert
Your work is gorgeous and flawless. ♥️ How do you figure out how much epoxy to start with? Assuming this project has a 12” diameter- how much did you start with?
Thank you so much! I am not good at knowing how much to use, but you can go to epoxycalculator.com and type in your measurements and it will tell you how much to use! Thank you for watching! 😄💕
I thought about doing this to my lazy Susan table that's in my craft room. Its so hard to get clean. but I had know idea how to go about doing it. Can you tell me about how much resin you used in each step? how much to cover with the white mica, then how much of each of the clear at the end? Is there anyway to use maybe tape or something around the bottom? Thank you for your videos, I love the quick no non-sense get the info out there videos. Thanks again. Oh abd the mica to the alcohol, how much mica for a spray bottle that size? genius!!!
Thank you!!! So you can check out epoxycalculator.com to help you with how much epoxy to use, I’m not sure how much I did, I need to start writing it down and leaving it in the description box for you guys! Yes you can do tape on the bottom, you just want to peel it off before the epoxy is really hard. Thank you for watching! 🥰❤️
I know it’s recommended to use 2 oz of pigment paste in 1 gallon of epoxy, so I’m not sure the exact measurement for smaller amounts. I usually mix in some, then lift the stir stick up and if I can see the stick through it I add more. You could also paint your surface white first so it for sure wouldn’t show through! And the one you poured already you could do a second layer and it should be thick enough to not show through. Thank you for watching! ☺️❤️
So pretty! Classy and simple! Perfect!
Wow absolutely gorgeous 😍
I never thought to add mica to alcohol for spritzing. You come up with the most beautiful ideas.
Thank you! I’ve seen the micas added to alcohol for countertops, it gives more dimension and a slight shimmer to it! Thank you for watching! ❤️❤️❤️
Loved the way you explained it will be very helpful.
Another stunner!
🥰
Tip for the bottom...
Liquid latex works wonders! Slap it on, and peel it off.
Or painters tape, electrical tape works as well.
Saves you from having to sand.
Thank you! I need to try that for the edges, I’m sure it would make it a lot easier!! Thank you for watching! ❤️❤️❤️
Ive recently bought a couple of these with intentions to either do a paint pour or resin design but not really knowing what i would do. Now i know im definately going to try this! Very classy... thankyou for sharing your talent and designs!
Aw thank you! And I definitely do NOT have a huuuge stockpile of wood trays and cutting boards to epoxy 🤣🤣🤣 lol Everytime I go to Ross or TJMaxx I have to look for more! Thank you so much for watching! 💕💕
This is gorgeous! Love how you explain the process. I have a wood one to repurpose now. :)
Thank you! I’m so glad you like it! Yes that’s a great idea! Make something new and beautiful out of something old! Thank you for watching! ❤️💕
Love it!
absolutely beautiful ... great
That turned out soo good!😍
Super cute!!
Absolutely beautiful!
That’s beautiful! I actually have an old wooden lazy Susan I think I’m gonna do this on it! Thanks for the inspiration ♥️
Thank you! That’s a great idea! I love giving new life to old things! Thank you for watching! 😄💕
Привет ! Мне нравится ,что цвета не яркие,-это ревлистично.творческих успехов тебе незнакомка!❤
Beautiful! Thanks for the video!
It’s gorgeous!!
After watching a number of marble effect resin videos I decided to try yours as not only did you get a great effect but you explained it well too. I’ve never done it before so I wonder if I make or break my latest project? Thanks for sharing…. New sub…….. Know Expert
It looks great....I like it.....
Thank you! And thank you for watching!! ❤️💕
Love it sooo pretty
Can this be done on laminate counters ? Thanks! Great work!😍
It's jus beautiful
Your work is gorgeous and flawless. ♥️ How do you figure out how much epoxy to start with? Assuming this project has a 12” diameter- how much did you start with?
Thank you so much! I am not good at knowing how much to use, but you can go to epoxycalculator.com and type in your measurements and it will tell you how much to use! Thank you for watching! 😄💕
@@CallieMileham1 just curious - how much did you mix up for this project?
I did 8 ounces for the color layer, and 4 for the clear layer 😄
@@CallieMileham1 thanks! That’s helpful - because I want to try what you did on the video. ♥️
Awesome! I’d love for you to tag me in a photo so I can see it! ❤️
Nice.!! Thanks for sharing
Awesome! If there anything I can use instead of the blow torch? 😅
Thank you! I’ve seen a lighter used, it’s just not as good at getting the bubbles. Thank you for watching! 🥰
Did you pour the clear layer after the first layer set?
I thought about doing this to my lazy Susan table that's in my craft room. Its so hard to get clean. but I had know idea how to go about doing it. Can you tell me about how much resin you used in each step? how much to cover with the white mica, then how much of each of the clear at the end? Is there anyway to use maybe tape or something around the bottom? Thank you for your videos, I love the quick no non-sense get the info out there videos. Thanks again.
Oh abd the mica to the alcohol, how much mica for a spray bottle that size? genius!!!
Thank you!!! So you can check out epoxycalculator.com to help you with how much epoxy to use, I’m not sure how much I did, I need to start writing it down and leaving it in the description box for you guys! Yes you can do tape on the bottom, you just want to peel it off before the epoxy is really hard. Thank you for watching! 🥰❤️
Beautiful 😍
Thank you!!! 🥰🥰🥰
About how much of white colorant did you use? I did this and the white was a bit transparent, can see the wood base. Thanks!
I know it’s recommended to use 2 oz of pigment paste in 1 gallon of epoxy, so I’m not sure the exact measurement for smaller amounts. I usually mix in some, then lift the stir stick up and if I can see the stick through it I add more. You could also paint your surface white first so it for sure wouldn’t show through! And the one you poured already you could do a second layer and it should be thick enough to not show through. Thank you for watching! ☺️❤️
I didn’t see the link to the silicone mats you use?
Whoops I thought I added it! Here it is! Thank you for watching! ❤️😄 amzn.to/35CMtHN
@@CallieMileham1 thank you 💜💜💜
Très beau bravo de Belgique
Thank you! ☺️
Pretty ❤️😍🇩🇰
super awful loud music, other than that great video
Thank you! 🥰
Must be your speaker because I thought it was just fine.