My son and I had a really great time working on this together, and ever since he's been asking to help anytime I go out. Great project to do with the kids. 😊
Thanks for the video! Planning to do this project in the spring. Were you concerned about supporting the wood due to the weight of the soil, especially after watering? I've read that cross support may be needed so the wood doesn't bow out. How has your experience been thus far?
I've had mine for about a year now and haven't had any issues. I think if you have good draining soil and the bottom is not covered you shouldn't have any issues.
Thanks, this looks awesome! I live in Sweden, though, and haven't been able to find a retailer. Do you know if there's a company that sells to Europe by any chance? I'm very grateful for any information.
I was told plastic inside boards erodes the wood faster, because it keeps the wood moist no matter how well the plastic is attached to the wood. Did you find this to be true? Also what did you do to ensure the boards were level all around?
Good morning. I have used a couple of bed designs, but opted for your less expensive design with the planter blocks. The addition of plastic to the inside walls made a lot of sense, and will be incorporating it in my bed that I've just built. I hadn't seen the planter block design before it was completed this bed. One thing I noticed was the ease that your stapler drove the staples into the wood. If possible, could you give me the brand name of your stapler? Also, great video, and my compliments to your helper.
The stapler brand is Arrow Fastener and it is called PowerShot forward action stapler. You can purchase it online here: amzn.to/3oO3Q4p Or at your local hardware store. I think I got mine at Lowe's. I've had this one for a few years and it works really well because the handle presses down towards where the staple is going which helps it to attach securely. High recommend. Thanks for watching 😊🌱 *Affiliate links. I may earn a commission from qualifying purchases.
About to put my first raised bed in. The size that we have to put it in is 12' long. Would you recommend one 12' long or cut it in half and have 2 6' long. We are going to make it two rows, the first being two block high and the second only one block high.
The length really doesn't matter, whatever works/looks best for your space is fine. The only recommendation I give is to not go wider than 4ft so that you are able to reach to the middle from either side without having to get into the raised bed. Hope this helps, thanks for watching 😊 🌱
For me personally, I'm not really concerned with that happening. The plastic I used is LDPE, which from my understanding is typically safe for agriculture use. However, it is possible that some leaching could occur, but with all the other plastic used in gardening (pots, drip lines, emitters, plant markers, compost bins, etc.) I don't think it's any more of an issue than anything else. With that said... If you are concerned, you could definitely just leave it out and not line the inside. Its only purpose is to keep some moisture out of the wood and hopefully prolong the lifespan by a few years. Hope this helps, thanks for watching 😊🌱
new to building garden boxes and I have a question (please don't laugh). It says these are for 2 x 6 boards but when i look for lumber it is advertised as 2 x 5 but is actually 1,5 x 6.5. Wil these work or will they not be sturdy?
Hi Roxy, honestly I don't know a lot about lumber sizing, but the boards I used are labeled as "Common: 2in x 6in x 8ft; Actual: 1.562in x 5.625in x 8ft" I think that's the same as what you're describing. My suggestion is to go to your store and grab one of the blocks and take it to the lumber section and try the board in it. It should be basically the same height as the block (slightly different is fine) and it should fit in the slot, but not have a lot of extra room. Hope this helps. Thank for watching 😊🌱
I tried to search online to find a store where you can purchase them in Australia, but I wasn't able to find one that I know will have them. However, here are a few places that may carry them or be able to order them for you: Bunnings Warehouse, Mitre 10, Reece, Stratco, or a local garden center/nursery. Sorry I couldn't be of more help.
Eventually they will. Mine is now 2 years old and some of the boards have started warping a small amount. But no bowing, and no major damage. It's in great shape so far. Thanks for watching 😊 🌱
Hi Gene, This garden bed is about 100 sq ft (approx 24ft x 4ft x 18in deep) and total cost including soil was about $600. You could probably build a 4x8ft bed using this method for around $200
@@InTheGarden Ya I made a 2ft by 6ft (I opted for screws and angle brackets instead) and filled it with 7.5 cu ft of good soil. It came out to roughly 65 with mulching. With the other stuff like bricks and rocks for edges and some decor it was 120 overall. The soil is gonna be the most expensive part unlesd you have means of making your own
Idk why I never saw this easy way to make raised beds thank you so much!! This is something I can do myself and not get stressed out 🌱
SUPPORTING YOUR CHANNEL WATCHING FROM SOUTHERN CALIFORNIA
Thanks for watching 😊🌱
You are awesome thank you!
This is the garden i can do
Excellent! Looks like a fun project for me and my kiddos :)
My son and I had a really great time working on this together, and ever since he's been asking to help anytime I go out. Great project to do with the kids. 😊
I know right I'm online trying to order some now
Great video! Would love to have this setup too someday when I transfer to the countryside!
Good communication and good information.
Thank you so much.
Thanks for watching 😊🌱
Supply list - 21-2X6 boards, 24-building blocks, 8-rebar post 4 feet each, 1 roll of plastic, and a drip irrigation kit.
Thanks for the video! Planning to do this project in the spring. Were you concerned about supporting the wood due to the weight of the soil, especially after watering? I've read that cross support may be needed so the wood doesn't bow out. How has your experience been thus far?
I've had mine for about a year now and haven't had any issues. I think if you have good draining soil and the bottom is not covered you shouldn't have any issues.
@@InTheGarden thank you!!
I may have to get me some for this spring
Thanks, this looks awesome! I live in Sweden, though, and haven't been able to find a retailer. Do you know if there's a company that sells to Europe by any chance? I'm very grateful for any information.
We are doing this next year
Thanks for this video. My garden is on a slope, any advise for a complete newbie?
I was told plastic inside boards erodes the wood faster, because it keeps the wood moist no matter how well the plastic is attached to the wood. Did you find this to be true? Also what did you do to ensure the boards were level all around?
The boards dry so quickly and pull moisture from the garden. I don't have plastic walls and have to water everyday.
@@TERRYTeran Thanks for your reply.
Good morning. I have used a couple of bed designs, but opted for your less expensive design with the planter blocks. The addition of plastic to the inside walls made a lot of sense, and will be incorporating it in my bed that I've just built. I hadn't seen the planter block design before it was completed this bed. One thing I noticed was the ease that your stapler drove the staples into the wood. If possible, could you give me the brand name of your stapler? Also, great video, and my compliments to your helper.
The stapler brand is Arrow Fastener and it is called PowerShot forward action stapler.
You can purchase it online here:
amzn.to/3oO3Q4p
Or at your local hardware store. I think I got mine at Lowe's.
I've had this one for a few years and it works really well because the handle presses down towards where the staple is going which helps it to attach securely. High recommend.
Thanks for watching 😊🌱
*Affiliate links. I may earn a commission from qualifying purchases.
@@InTheGarden Thank you for your quick reply. I have already ordered mine from my local Lowes. Have a great summer.
I want to build this in front of my fence, do i need to dig up the grass or level it? Can i just build on top as is?
About to put my first raised bed in. The size that we have to put it in is 12' long. Would you recommend one 12' long or cut it in half and have 2 6' long. We are going to make it two rows, the first being two block high and the second only one block high.
The length really doesn't matter, whatever works/looks best for your space is fine. The only recommendation I give is to not go wider than 4ft so that you are able to reach to the middle from either side without having to get into the raised bed.
Hope this helps, thanks for watching 😊 🌱
Don’t know what happened, but did this last year & now garden is a hot mess. Boards are warped now.
Can moles get into these?
Isn't the plastic going to get hot and leach chemicals into the soil?
For me personally, I'm not really concerned with that happening. The plastic I used is LDPE, which from my understanding is typically safe for agriculture use. However, it is possible that some leaching could occur, but with all the other plastic used in gardening (pots, drip lines, emitters, plant markers, compost bins, etc.) I don't think it's any more of an issue than anything else. With that said... If you are concerned, you could definitely just leave it out and not line the inside. Its only purpose is to keep some moisture out of the wood and hopefully prolong the lifespan by a few years.
Hope this helps, thanks for watching 😊🌱
I went 6x8
new to building garden boxes and I have a question (please don't laugh). It says these are for 2 x 6 boards but when i look for lumber it is advertised as 2 x 5 but is actually 1,5 x 6.5. Wil these work or will they not be sturdy?
Hi Roxy, honestly I don't know a lot about lumber sizing, but the boards I used are labeled as "Common: 2in x 6in x 8ft; Actual: 1.562in x 5.625in x 8ft"
I think that's the same as what you're describing. My suggestion is to go to your store and grab one of the blocks and take it to the lumber section and try the board in it. It should be basically the same height as the block (slightly different is fine) and it should fit in the slot, but not have a lot of extra room.
Hope this helps. Thank for watching 😊🌱
@@InTheGarden That helps. Thank you
👍👍🇺🇸
Any Australian viewers know where we can buy planter blocks here?
We have them readily available at our Home improvement stores like Lowes or Home Depot.
I tried to search online to find a store where you can purchase them in Australia, but I wasn't able to find one that I know will have them. However, here are a few places that may carry them or be able to order them for you: Bunnings Warehouse, Mitre 10, Reece, Stratco, or a local garden center/nursery.
Sorry I couldn't be of more help.
That plastic is a mistake, moisture will build up between the plastic and the wood and actually increase decomposition
What would you recommend? Clear coat the wood?
@@FC2ESWStreat it is best option to me
Can always spray sealer on the block
Why not just char the wood to prevent rot? The Japanese used to char their wood in their carpentry.
I'm not personally familiar with that process, but that sounds like a great idea to consider!
Wood pressure treated ?
No, not pressure treated. Just standard lumber
You wouldn't want PT wood as it could leach chemicals into the ground that you really don't want in your food.
Holy shit does everything leach chemicals
Great video ! Can you pls share spec on plastic sheeting ?
These walls will bow. Need pictures?
Eventually they will. Mine is now 2 years old and some of the boards have started warping a small amount. But no bowing, and no major damage. It's in great shape so far.
Thanks for watching 😊 🌱
Can you give me an estimate of how much all parts cost you?
Hi Gene, This garden bed is about 100 sq ft (approx 24ft x 4ft x 18in deep) and total cost including soil was about $600. You could probably build a 4x8ft bed using this method for around $200
@@InTheGarden Ya I made a 2ft by 6ft (I opted for screws and angle brackets instead) and filled it with 7.5 cu ft of good soil. It came out to roughly 65 with mulching. With the other stuff like bricks and rocks for edges and some decor it was 120 overall. The soil is gonna be the most expensive part unlesd you have means of making your own