I have lost count of the number of times I've referred back to this video, it is so useful, very clear and involves minimal swearing my end as I change the settings:-)
Thank you so much for that tutorial! You speak clearly and calm which was very helpful. I now understand the controls, how to set timings and how to change them in the future if I want to. I'll now be spending less money on my bills thanks to you! Thanks again :)
Thank you so much for this, got totally confused by the instructions that came with the unit. Your video explained the system it uses very clearly. Some senseless person (not me) had programmed it to have heating on for five hours, same for hot water (who could possibly use that much hot water lol).., so will now be saving myself a lot of money I had been paying for gas. I have the Drayton Lifestyle Dual Channel LP722Si But it works the same way.
Great video - thanks! I'm just completely bewildered as to why there are 74 thumbs down? I mean, were they angry that you wasn't prepared to drive over and do it for them?! Very clear anyway. Cheers :)
GOOD straight forward explanation ... QUESTION ... How does it know the time and the correct time and date to change from BST to GMT and vice-versa ... is it radio linked ???
Just got my set up. Had no clue what I was doing, starting to get frustrated.. wasnt expecting the vido to make me laugh as well.. as help me out.. "bst" (British summer time).. 🙏🙏
I left the heating and water 'on' as I could not figure the timer out (the midday option past me by) until i found this video this morning due to mounting heating oil bills. All working perfectly now, thank you so much
Brilliant! I've misplaced my User Manual for this Timer! Then, when I had my Worcester Boiler serviced recently, my Engineer said that 'he'd adjusted the timing' - But since BST on 30th March,'14 my Drayton is an hour out of sync'! So although this is great help video - I've now learned about the Holiday & Boost settings! Meanwhile, I'll will have to go & change ALL of my own settings by an hour! C'est la vie . .!
If it's an hour in front of BST the quickest remedy if you don't want the hassle of reprogramming is to switch OFF the C/H system for one hour and then switch back on. When I say switch off I mean of course switch off from the mains plug socket supplying power to the system NOT the programmer,
Thank you very much for this - you're a star! Got this unit from British Gas, didn't supply a manual, said it'd be on their website. It isn't and so thank you very much.
I think Drayton needs to be voted the worst usability product ever, what a totally rubbish display and over complicated system I really find it hard to understand madness
Absolute lies. I turn my boiler on by switch with heating side on off and it still cooks my house. More winter cold showers until I can afford another 2 grand.
The video is really helpful. Probably a naive question, can you set the temperature in these systems? For example if you want the room temperature to be 15 or 20 degrees?
soo i ve got one of these......i can use my hot water atm...i cnt use the heating despit the light coming on, the bolier doesnt do anything....any help ??
Thankyou, my LP522 unit seems to come on ok, timer etc ok. But when I switch the HTG off, the boiler seems to remain on for a bit? I suspect the *boost* mode may be the culprit and I will watch its functioning very carefully to test my hypothesis. I have set the b=0 just in case it is. This is a new system installed a few years back.👌
We've had this programmer for four years now and we still don't know how to use it...and we don't class ourselves as thick! Comes to something when you have to resort to TH-cam to take a bath! (:o((((
It's not the worst by a long way! But it's old technology, that's why it's so cumbersome. Having to separately time the heating periods for weekdays and weekends . . . just buy a new one, I did. So much better than Lifestyle.
how many hours a day do i need to have the hot water thermostat on to enjoy a couple of hot showers and washing up my dishes? At the moment is set on 5hours a day which looks a bit excessive to me...
It probably is but don't forget your hot water cylinder has a thermostat and it won't allow the system to 'fire up' in those 5 hours if the temp in the cylinder is already satisfied.
Susana Artime I set my hot water to come on first thing in the morning for an hour and a quarter. This easily gives two showers and plenty of washing up water for the day. I personally don't need a pm setting for the hot water to come on again as the morning heating time is suffient for the whole day. So I programme the hot water PM timer to show on and show off at the same. ie both the on and off timer settings show the same time. Thats this appliance's equivelent to turning the PM timer off. In this video the guy demonstrates this method about half way through using 12pm as the demo time although his demo is for the central heating.
Let's say we are not lazy to program it to start at a certain time and just when we feel cold to press a button and heating will come for 1h only or wanting to have hot water to press a button for only 1h whenever we feel like it how do we do it ? thx
we have moved in to our new house a few years ago and we have this timer but when the heating comes on the hot water comes on to is there a problem with our timer or is this just the way our system works we have a large black header tank and 2 cylinders for stored hot water
Iv been struggling with this for nearly 4 months now . We are getting central heating when we really need just hot water . Our house is a sauna 😮. In August the temperature is 29 degrees and im sooo frustrated. And iv been told im going to get 75% fuel bill increase on top .
All very well to say the clock is set automatically, but what do you do if it doesn't change GMT to BST? I fiddled around with it and managed to find a clock setting by pressing the Select button (and making a few voodoo incantations). Somehow, I managed to change it to the correct time, but I still have no idea what the date setting is. What a dog's breakfast this controller is!
I just want my heating on for a few hours in the evening. Why do they come pre-set with morning, noon and night settings which you can't delete? I assume I'd have to set on and off to the same time for morning and noon to get around this? Or maybe only switch to timed after these first 2 programs?
Just fitted a Lifestyle branded version, and will wait to see if it switches automatically when clock changes. It's replacing a 15 year old Grasslin programmer- on that, there's a recess where you jam a pencil in to switch between summer & winter time. I wish these units had their fixing screws (to backplate) on topside; would make life so much easier when removing! Shame there's no option to programme all week with same programme.
Bizarrely, my Drayton LP522 doesn't have a Boost function or Holiday mode. Are there two variants on this model ? I see other TH-cam videos are also missing these options.
In our new house, we have one of those large hot water tanks and one of these programmers sitting underneath the boiler. Do I set the on time to be 7am and off time to be 11pm to ensure that we get hot water throughout the day? Or do I start it at 7am and turn it off at 9am and then back on again in the late afternoon/evening? I'm really confused... Please help...
Hello, I am trying to set my mums boiler for hot water and heating for the first time. I would like to set the water to come on for a couple of hours in the morning and evening. As it has 3 settings Do I ??? Set program one for 6.30am on to 8am off, program two 12 on then 12 off then program 3 4pm on 5pm off for example. And, how does heating work to cover from 6am to 10.30 pm for example. Do I?, Program one 6am on to 22.30 off?, Program two 12 on 12 off?, then Program three I am stuck do I do same as Program one or other?. Sorry, if I sound dim but not techy and would like to understand. Really appreciate your patience in advance.
Excellent video explains the controller very well. Minor point the controller he uses is a later version some of the earlier versions of this don't have quite the same functionality the one we've got seems to only have two programs however was still able to use the video to program the controller so good
Hi there! At the moment I am unable to set central heating and hot water to function independently. I.e i can only get the central heating only to work as long as the hot water is on. Any help would be greatly appreciated!
This video is great. Anyone any idea how i can use the central heating programmer if i want to say maintain the house temperature using a thermostat at 20 degrees but dont want the heating on all the time
@@johnausten574 Hi john, your question predates a bit of an impasse. I understand you want a constant temperature which in itself would require the heating to be permantly on but yet u wish for it not be on constantly. I would suggest either as you itstated to set the thermostat to 20 degrees give or take two degrees and leave heating on which would allow the system to get up to this temp then switch off for an amount of time it felt it was looking this constant and turn back on(outside temp pending taking into account thermal loss) or I would set it to have the three programme time zones to cone on in four hour bursts say 7-11, 1:30-5:30 and 7-11 again with the therm again on 20 at least then as you initially requested it is not on all the time but the house is keeping to the 20 degree mark 80-90% is the day which I think may conserve power/money for yourself. I hope that may help!
Hi hoping you can help I have the above and it used to work fine set at the times required. I have a small radiator fitted in the downstairs toilet by a cowboy unfortunately. He drained my tank in the box room and even went up into the loft where there is another tank. I have no idea what he did but now the timer doesn't work neither does the water heat up even if switched on manually. I'm having to use the switch in the bedroom by the tank which I'm sure is for back up. I'm sure it's something minor but he's not answering my calls. When he was fitting the radiator he was facetiming someone for advice... please help.
Hi thank you very much for your demonstration. I didn't get it 100%. I would like to ask you what if I leave it the CH and CW, ON at all time what will happen ?
Hi. I use my hot water and heating when I want them on by selecting the "Select" button untill it becomes "On". This has been going well for many years however now when I press hot water the heating comes on. Anyway to fix it to normal ?
We had a power cut during the night we slept. Hence, we had to reschedule our clock/programme, I used to be able to reschedule the clock/programme, no problem, but I've found that as I get older, I can't remember what do. This video has been a godsend, to be honest. My only problem this time round is that I've done all programming & it's telling me it's Friday 24th January. When it's only Tuesday 21st January. Please can someone tell me how to change the day from Friday to Tuesday? Please, thank you very much for your help.
Is this the same for my LP241 panel? It looks the same panel, but when I go through functions you did it came up with Time/Programme/Day. Which made it a little bit confusing.
My settings for the central heating and hot water is different however when I turn the hot water on why does the central heating come on and the hot water doesn’t i am so baffled?
Anybody help me I can’t get any hot water,by using manual switch. Don’t have the heating on,so use manual switch when ever I need hot water. Trouble is I can only get hot water,by putting the heating on at the same time as manual switch for water. So as I turn the heating off,water off. Any advice would help. Just need the manual hot water on not the heating.
Why does it say ‘SUN’ when i turn it to the ‘ON’ option? I’ve used this for many years but have never seen this happen and no i cannot get my heating on... please help!!!
Hi there I've got quite a few settings on my panel but all I want is to clear them all or delete them all in order to not have any settings at all .I just want to turn on whenever I feel to use it without settings. What should i do?
I've just moved into a property with one of these control panels. When the central heating is selected within any mode, the hot water is automatically selected too. Is there a way to stop this and use it just solely for central heating without the hot water being selected?
Great video but I’m still confused. Can I not switch the hot water on whenever I please rather than having it timed… I am not used to this style of heating/water controls. Also when I turn the dial to the water “on” setting the central heating comes on but my water is still cold. I would be so grateful if someone can help me xx
I stupidly had heating guy put mine 7am on 9pm off. As forgot i get up later in winter and go to bed later. My stupid boiler keeps defaulting back to those times everytime i try to change.
How did you disable the amber LCD backlight on your one? On my one it's always constantly on. I'd much rather it just turn on when the boilers turned on rather than it be on 24/7.
the gas fitters seem to put em in hard places, where a 5 year old child can get at them, but an adult has no chance and too low for old people to crawl down..,,
I have a similar system to this but ‘British Gas’ - but it doesn’t stipulate hot water or central heating when trying to programme to the timer. So i can only program either CH or HW to a set time and not the other. So I have hot water set to come on three times a day and then if I need the heating on - I have to set it to ‘ON’ - and just use the thermostat to control the heat. The water seems hotter than normal so something isn’t right. I just want to keep my bills down - so I would ideally like to set the heating to the timer too but it doesn’t seem possible. What am I doing it wrong? Thank you
I have lost count of the number of times I've referred back to this video, it is so useful, very clear and involves minimal swearing my end as I change the settings:-)
THANK YOU SO MUCH, I FOUND YOUR VIDEO FAR MORE EASY TO GRASP THAN THE INSTRUCTIONS THAT CAME WITH THE PROGRAMMER. THANK YOU.
Thank you so much for that tutorial! You speak clearly and calm which was very helpful. I now understand the controls, how to set timings and how to change them in the future if I want to. I'll now be spending less money on my bills thanks to you! Thanks again :)
Excellent! Very clear instructions enabled me to programme my Drayton LP522 boiler. A task which I was not relishing. Many thanks!
Life saver thank you! Just moved to a new house with this system, I've only ever had storage heaters before so I was suitably baffled!
Thank you so much for this, got totally confused by the instructions that came with the unit. Your video explained the system it uses very clearly. Some senseless person (not me) had programmed it to have heating on for five hours, same for hot water (who could possibly use that much hot water lol).., so will now be saving myself a lot of money I had been paying for gas. I have the Drayton Lifestyle Dual Channel LP722Si But it works the same way.
Very clear instruction the best one but still baffled very complicated 68 yr old.
Great video - thanks! I'm just completely bewildered as to why there are 74 thumbs down? I mean, were they angry that you wasn't prepared to drive over and do it for them?! Very clear anyway. Cheers :)
What a useful piece of information. I could have spent years messing around not getting it right.
I've just moved and this control is in the flat. The video helped considerably! Thank you!
GOOD straight forward explanation ... QUESTION ... How does it know the time and the correct time and date to change from BST to GMT and vice-versa ... is it radio linked ???
Just got my set up. Had no clue what I was doing, starting to get frustrated.. wasnt expecting the vido to make me laugh as well.. as help me out.. "bst" (British summer time).. 🙏🙏
I left the heating and water 'on' as I could not figure the timer out (the midday option past me by) until i found this video this morning due to mounting heating oil bills. All working perfectly now, thank you so much
So helpful, brilliant, thank you and cheers. My blood pressure was at 200/180, until I saw this video. Phew🤯
Great work, much better than reading our "missing" manual!
VERY useful video for me. Worked the same for my LP722 model. MANY thanks xx
Brilliant!
I've misplaced my User Manual for this Timer!
Then, when I had my Worcester Boiler serviced recently, my Engineer said that 'he'd adjusted the timing' - But since BST on 30th March,'14 my Drayton is an hour out of sync'!
So although this is great help video - I've now learned about the Holiday & Boost settings!
Meanwhile, I'll will have to go & change ALL of my own settings by an hour!
C'est la vie . .!
If it's an hour in front of BST the quickest remedy if you don't want the hassle of reprogramming is to switch OFF the C/H system for one hour and then switch back on. When I say switch off I mean of course switch off from the mains plug socket supplying power to the system NOT the programmer,
Had this programmer for over 10 years by watching this video just found out it has holiday mode. 😊
Very informative any chance of using a clearer accompanying video ?
God bless you! Video was more useful than I can express. Thank you very much!
Thank you very much for this - you're a star! Got this unit from British Gas, didn't supply a manual, said it'd be on their website. It isn't and so thank you very much.
I think Drayton needs to be voted the worst usability product ever, what a totally rubbish display and over complicated system I really find it hard to understand madness
I🌽
I🌽
Completely agree, theyre frustrating
It’s madness. I’m about to rip the cunting thing off of the wall.
Absolute lies. I turn my boiler on by switch with heating side on off and it still cooks my house. More winter cold showers until I can afford another 2 grand.
The video is really helpful. Probably a naive question, can you set the temperature in these systems? For example if you want the room temperature to be 15 or 20 degrees?
soo i ve got one of these......i can use my hot water atm...i cnt use the heating despit the light coming on, the bolier doesnt do anything....any help ??
iv had this for 15 years and still dont no how to work it ()...now i cant get the heating on
Can I have hot water during a period that beating is off? So HW ON but CH OFF?
Thanks for your help on this. Saved me a bunch of time.
Thanks, this is so useful. Much easier than going through a manual.
Thankyou, my LP522 unit seems to come on ok, timer etc ok. But when I switch the HTG off, the boiler seems to remain on for a bit?
I suspect the *boost* mode may be the culprit and I will watch its functioning very carefully to test my hypothesis. I have set the b=0 just in case it is. This is a new system installed a few years back.👌
Perfectly clear instructions, thank you so much!
Alarm went off this morning with the message ‘5er’ now no heating or hot water 😢
We've had this programmer for four years now and we still don't know how to use it...and we don't class ourselves as thick! Comes to something when you have to resort to TH-cam to take a bath! (:o((((
Taking a bath on youtube ?
Send me the link!
@@robertbarr8001 (:o0 Cheeky!
It's not the worst by a long way! But it's old technology, that's why it's so cumbersome. Having to separately time the heating periods for weekdays and weekends . . . just buy a new one, I did. So much better than Lifestyle.
Be interesting to see if the smart meter boffins are singled out for "special energy saving treatment" this winter.
You are a life saviour ❤❤❤❤
how many hours a day do i need to have the hot water thermostat on to enjoy a couple of hot showers and washing up my dishes? At the moment is set on 5hours a day which looks a bit excessive to me...
It probably is but don't forget your hot water cylinder has a thermostat and it won't allow the system to 'fire up' in those 5 hours if the temp in the cylinder is already satisfied.
Susana Artime
I set my hot water to come on first thing in the morning for an hour and a quarter. This easily gives two showers and plenty of washing up water for the day. I personally don't need a pm setting for the hot water to come on again as the morning heating time is suffient for the whole day. So I programme the hot water PM timer to show on and show off at the same. ie both the on and off timer settings show the same time. Thats this appliance's equivelent to turning the PM timer off. In this video the guy demonstrates this method about half way through using 12pm as the demo time although his demo is for the central heating.
Let's say we are not lazy to program it to start at a certain time and just when we feel cold to press a button and heating will come for 1h only or wanting to have hot water to press a button for only 1h whenever we feel like it how do we do it ? thx
Did you figure this out please? I'm struggling
we have moved in to our new house a few years ago and we have this timer but when the heating comes on the hot water comes on to is there a problem with our timer or is this just the way our system works
we have a large black header tank and 2 cylinders for stored hot water
Absolutely excellent video to help me use an absolutely terrible product, thanks!
I need help, if you want one time to work do you leave it on once and press the advance button
Iv been struggling with this for nearly 4 months now . We are getting central heating when we really need just hot water . Our house is a sauna 😮. In August the temperature is 29 degrees and im sooo frustrated. And iv been told im going to get 75% fuel bill increase on top .
Your 3 port valve is most likely faulty
Your vid was SOOO helpful, as the instructions were SOOOO Unhelpful haha.
Thank you.
simple, direct and clear. Thank you.
All very well to say the clock is set automatically, but what do you do if it doesn't change GMT to BST? I fiddled around with it and managed to find a clock setting by pressing the Select button (and making a few voodoo incantations). Somehow, I managed to change it to the correct time, but I still have no idea what the date setting is. What a dog's breakfast this controller is!
I just want my heating on for a few hours in the evening. Why do they come pre-set with morning, noon and night settings which you can't delete? I assume I'd have to set on and off to the same time for morning and noon to get around this? Or maybe only switch to timed after these first 2 programs?
I've got this controller. Its started turning heating on automatically without any pre selected times ..any ideas
Thank you for your help you are a lifesaver
Just fitted a Lifestyle branded version, and will wait to see if it switches automatically when clock changes.
It's replacing a 15 year old Grasslin programmer- on that, there's a recess where you jam a pencil in to switch between summer & winter time. I wish these units had their fixing screws (to backplate) on topside; would make life so much easier when removing! Shame there's no option to programme all week with same programme.
Bizarrely, my Drayton LP522 doesn't have a Boost function or Holiday mode. Are there two variants on this model ? I see other TH-cam videos are also missing these options.
There are two models - the 'LP522si' version has boost & holiday mode.
In our new house, we have one of those large hot water tanks and one of these programmers sitting underneath the boiler. Do I set the on time to be 7am and off time to be 11pm to ensure that we get hot water throughout the day? Or do I start it at 7am and turn it off at 9am and then back on again in the late afternoon/evening? I'm really confused... Please help...
Hello, I am trying to set my mums boiler for hot water and heating for the first time. I would like to set the water to come on for a couple of hours in the morning and evening. As it has 3 settings Do I ??? Set program one for 6.30am on to 8am off, program two 12 on then 12 off then program 3 4pm on 5pm off for example. And, how does heating work to cover from 6am to 10.30 pm for example. Do I?, Program one 6am on to 22.30 off?, Program two 12 on 12 off?, then Program three I am stuck do I do same as Program one or other?. Sorry, if I sound dim but not techy and would like to understand. Really appreciate your patience in advance.
How do I know which side button is for heating or water?
Very good video but just had one fitted, trying to see if there is any way of altering the water times without going through the heating mode ?
Excellent video explains the controller very well. Minor point the controller he uses is a later version some of the earlier versions of this don't have quite the same functionality the one we've got seems to only have two programs however was still able to use the video to program the controller so good
My days does not match on the display automatically as you said? How can I change to correct day please?
Hi there!
At the moment I am unable to set central heating and hot water to function independently. I.e i can only get the central heating only to work as long as the hot water is on. Any help would be greatly appreciated!
This video is great. Anyone any idea how i can use the central heating programmer if i want to say maintain the house temperature using a thermostat at 20 degrees but dont want the heating on all the time
@@johnausten574 Hi john, your question predates a bit of an impasse. I understand you want a constant temperature which in itself would require the heating to be permantly on but yet u wish for it not be on constantly. I would suggest either as you itstated to set the thermostat to 20 degrees give or take two degrees and leave heating on which would allow the system to get up to this temp then switch off for an amount of time it felt it was looking this constant and turn back on(outside temp pending taking into account thermal loss) or I would set it to have the three programme time zones to cone on in four hour bursts say 7-11, 1:30-5:30 and 7-11 again with the therm again on 20 at least then as you initially requested it is not on all the time but the house is keeping to the 20 degree mark 80-90% is the day which I think may conserve power/money for yourself. I hope that may help!
Hi hoping you can help I have the above and it used to work fine set at the times required. I have a small radiator fitted in the downstairs toilet by a cowboy unfortunately. He drained my tank in the box room and even went up into the loft where there is another tank. I have no idea what he did but now the timer doesn't work neither does the water heat up even if switched on manually. I'm having to use the switch in the bedroom by the tank which I'm sure is for back up. I'm sure it's something minor but he's not answering my calls. When he was fitting the radiator he was facetiming someone for advice... please help.
Great vid. very well explained.
How do you just check existing setting?
How does this link with Drayton Thermostat(round dial)
Hi thank you very much for your demonstration. I didn't get it 100%. I would like to ask you what if I leave it the CH and CW, ON at all time what will happen ?
Hi. I use my hot water and heating when I want them on by selecting the "Select" button untill it becomes "On". This has been going well for many years however now when I press hot water the heating comes on. Anyway to fix it to normal ?
+Sneaky Thanks for your time if you read this.
We had a power cut during the night we slept.
Hence, we had to reschedule our clock/programme, I used to be able to reschedule the clock/programme, no problem, but I've found that as I get older, I can't remember what do.
This video has been a godsend, to be honest.
My only problem this time round is that I've done all programming & it's telling me it's Friday 24th January. When it's only Tuesday 21st January.
Please can someone tell me how to change the day from Friday to Tuesday?
Please, thank you very much for your help.
Tried to reset my clock, press the set button and the right arrow goes down from off to timed…help please
how long after pressing the hot water booster does it take for there to be hot water
Is this the same for my LP241 panel? It looks the same panel, but when I go through functions you did it came up with Time/Programme/Day. Which made it a little bit confusing.
My settings for the central heating and hot water is different however when I turn the hot water on why does the central heating come on and the hot water doesn’t i am so baffled?
if i set my CH to be always on by selecting ON, why does it keep turning off at 9:30pm everynight?
Can this be set just to be on just for 1hr when I please
I only want to put the timer on for my heating. I want to be able to use my hot water anytime I turn the hot taps on.
Well another cold winter bath for me. Wish Mr and my pacemaker look.
Thanks for this - very clear!
Does anyone know if the Boost button will work when the heating is in 'off' mode?
I do appreciate the video however thanks its a lot better than the piece of paper you get with the unit.
My system is supposed to be summer time enabled. It has not changed this last weekend. What do i do?
Anybody help me
I can’t get any hot water,by using manual switch.
Don’t have the heating on,so use manual switch when ever I need hot water.
Trouble is I can only get hot water,by putting the heating on at the same time as manual switch for water. So as I turn the heating off,water off.
Any advice would help.
Just need the manual hot water on not the heating.
Why does it say ‘SUN’ when i turn it to the ‘ON’ option? I’ve used this for many years but have never seen this happen and no i cannot get my heating on... please help!!!
How you set to have only hot water and no heating
Is this the equivalent of the British Gas UP2?
Yes it is
Hi there I've got quite a few settings on my panel but all I want is to clear them all or delete them all in order to not have any settings at all .I just want to turn on whenever I feel to use it without settings. What should i do?
Hi pls reply when you find out how. I’m having same problem. 😢
Is there a battery back up on the Drayton LP241 (Mk4) Programmer? How do i change the battery as every power cut I lose all my settings
Excellent video, thank you for your help.
Good explanation thanks mate👍
How do you leave it on
I've just moved into a property with one of these control panels. When the central heating is selected within any mode, the hot water is automatically selected too. Is there a way to stop this and use it just solely for central heating without the hot water being selected?
Great video but I’m still confused. Can I not switch the hot water on whenever I please rather than having it timed… I am not used to this style of heating/water controls. Also when I turn the dial to the water “on” setting the central heating comes on but my water is still cold. I would be so grateful if someone can help me xx
Hi pls reply when you find out. I have the same problem
Brilliant video thanks !
How do I get the yellow back light to turn off, as constantly on and pissing me off.. yours is not on so must be able to turn off..
Take the bulb out ;)
You can’t.
Andy Kirwan
The one on show here has no light on.. trust me I just want to smash it off the wall..
I agree that these timers are the most awkward to set ever. We have 2 houses with these and hate setting them up. Horrible things.
I stupidly had heating guy put mine 7am on 9pm off. As forgot i get up later in winter and go to bed later.
My stupid boiler keeps defaulting back to those times everytime i try to change.
I have this panel.. it has a constant orange light on, too bright.. why...
Thank you! Great video!!
very useful simple to understand thank you
Very useful. Thanks a lot
cant get timer on boost
Thank you very helpful
My clock is four hours behind how do I fix this please?
how to make sure that the programmer is not timed
How did you disable the amber LCD backlight on your one? On my one it's always constantly on.
I'd much rather it just turn on when the boilers turned on rather than it be on 24/7.
My clock on the programme timer has not automatically reset for British Summer Time
Any ideas ??
the gas fitters seem to put em in hard places, where a 5 year old child can get at them, but an adult has no chance and too low for old people to crawl down..,,
Spot on video thanks
I hope this video helps. Im going to give it a go .
I have a similar system to this but ‘British Gas’ - but it doesn’t stipulate hot water or central heating when trying to programme to the timer. So i can only program either CH or HW to a set time and not the other. So I have hot water set to come on three times a day and then if I need the heating on - I have to set it to ‘ON’ - and just use the thermostat to control the heat. The water seems hotter than normal so something isn’t right. I just want to keep my bills down - so I would ideally like to set the heating to the timer too but it doesn’t seem possible. What am I doing it wrong? Thank you