Still did not work for me BUT I figured it out… if it still does not work then reformat your SD card AGAIN then retry this process. And it finally worked for me
Hey, big thanks for the guidance! Just double-checking with you: once the FCC hack is in the bag, should I switch the 'Channel Mode' back to AUTO? By the way, I pulled it off, but the weather's playing spoiler for a test flight. Drop me a line if you notice any changes, especially in range. Is it kicking it up a notch? Cheers!
set on manual transmission, bandwidth 40 Mhz, Ch 3. I corrected the statement in the video, regarding setting transmission on automatic, it's best not to do it. In fact, when it's done, the bandwidth instead chooses to 20 and 10 Mhz and the bitrate will drop to 4 fps. Especially for longrange always set to manual transmission. Thank You.
Hello. today I tried to record the flight on my goggle integra, but without success, I don't have the advanced camera settings option in the menu, I don't know why this tab doesn't appear for me 😔. I am using old original DJI Air Unit. my o3 still hasn't arrived. I'm going to install this one on another drone that I'm building. would you know how to access this menu to record the video both on the glasses and on the air unit card?
Hi....Bro... Indeed there are times like that, when the automation doesn't work for some reason. Then do it manually Here are the steps. 1. Drone connection with Integra 2. A drone camera image appears on Integra. 3. Click backwards toggle menu 4. will appear video recorder image 5. Press the toggle down. 6. integra recording starts. 7. look at the top right of the integra screen there is an active recording process. marked with a red dot and the video recording time
@@JohnnyEscobar1 i use goggles 2 most of the time. Has sound.. boots up quicker. Slightly wider feald of view, they turn off screen automaticly when take off head. Can change battery.
set on manual transmission, bandwidth 40 Mhz, Ch 3. I corrected the statement in the video, regarding setting transmission on automatic, it's best not to do it. In fact, when it's done, the bandwidth instead chooses to 20 and 10 Mhz and the bitrate will drop to 4 fps. Especially for longrange always set to manual transmission, 40 MHz bandwidth,Ch 3. Thank You.
Hi..Bro...after you unlock ce to fcc with the latest firmware, 'FCC'..still works.. The latest firmware.(V01.02.00.00)Just added support for dji mavic 3 and group of it... Aerial drones, especially the DJI Mavic 3 and all its variations, now with this firmware, can use DJI Integra. Not as usual via mobile phones etc.
Hi. Just got the new avata / integra firmware update that supports DJI FPV drone. I have tried the method shown in video many times but it does not seem to work for me. Would new firmware update have made it not work or is it something i am doing. Formatted sd card before i tried this each time. Any ideas ?
![โอ้เธอช่าง... - บี้เดอะสกา ft. ต๋อง เทวัญ (Prod. by ป๋าเพชร) [Official MV]](http://i.ytimg.com/vi/zbWhiLFmVL0/mqdefault.jpg)
Great instructions thank you. I look forwards to doing this when my Integra goggles arrive in 2 weeks time.
👍 Terima kasih
mantab
Wahhh...tks mas Andrea ..sudah dikunjungi ..motivator dan inpirator...Pilot..longrange Indonesia...👏👏
Still did not work for me BUT I figured it out… if it still does not work then reformat your SD card AGAIN then retry this process. And it finally worked for me
which one prossess didnt work ? in my case channel mode in 1:19 minute above is disable. how do you ?
Hey, big thanks for the guidance!
Just double-checking with you: once the FCC hack is in the bag, should I switch the 'Channel Mode' back to AUTO?
By the way, I pulled it off, but the weather's playing spoiler for a test flight. Drop me a line if you notice any changes, especially in range. Is it kicking it up a notch?
Cheers!
Thx
I wonder what if i unplug the sd card was the fcc hack still there? Or its just return to the CE mode.
Great, thanks. Which bandwidth and channel is best for penetration please?
set on manual transmission, bandwidth 40 Mhz, Ch 3. I corrected the statement in the video, regarding setting transmission on automatic, it's best not to do it. In fact, when it's done, the bandwidth instead chooses to 20 and 10 Mhz and the bitrate will drop to 4 fps. Especially for longrange always set to manual transmission. Thank You.
Bandwidth 40 MHz,Ch3..for longrange and free style..
Я так понял что после разблокировки вернуть режим авто ?
Thanks. But all this video can take 1 min. You're too slow, dude
Naah ini nih yg dicari cari, ketemu juga, dari kemaren om gimana caranya bikin integra longrength
Set transmisi ke manual lalu pilih bandwidth 40 MHz di Ch 3..
Siap om, ane praktekan
ini settingan untuk avata om @@suswidianto ?
kalau di video om pilih auto, bukan manual..
lebih baik pilih auto atau manual ya om ? please advice nya.
untuk controllernya, harus pake yang remote controller atau bisa pakai motion controller?
Does it void your warranty on Google’s
Hello
When I use the goggle intégra in automatique mode for the channel , it turn always in 2,4 Mhtz, the 5,8 Mhtz don't stay on. Do you know why?
Hello. today I tried to record the flight on my goggle integra, but without success, I don't have the advanced camera settings option in the menu, I don't know why this tab doesn't appear for me 😔. I am using old original DJI Air Unit. my o3 still hasn't arrived. I'm going to install this one on another drone that I'm building. would you know how to access this menu to record the video both on the glasses and on the air unit card?
Hi....Bro...
Indeed there are times like that, when the automation doesn't work for some reason. Then do it manually
Here are the steps.
1. Drone connection with Integra
2. A drone camera image appears on Integra.
3. Click backwards toggle menu
4. will appear video recorder image
5. Press the toggle down.
6. integra recording starts.
7. look at the top right of the integra screen there is an active recording process. marked with a red dot and the video recording time
wow, DJI dropped the ball. since my friends' goggle2 works fine. thank you very much for your attention.
It works at the mini 3 pro?
yes...with a note that you have to upgrade to the latest software
Hi
Bandwidth on what number is stroger?
Setting on manual Transmission and choice of 40 MHz bandwidth ,Ch 3
Buat vista sm air unit sama juga ya om?
Iya Bro...,hanya update firmware dji vista dan dji air unit nya dulu...tks
@@suswidianto siap... thanx ya om infonya 🙏
Itu vistanya juga harus s kasih file itu ga gan?
Settingan ini berlaku jg utk drone fpv non dji kah?
Iya benar bro...
is it still working with the latest firmware?
Hey.. Same question here 😉
I hope someone will answer us 💪🏼🍀
It works!
I did it 1 hour ago!
which firmware do you use ?@@speakerRL
@@dailydronejourney i will be home late today...will gonna tell you later✌🏼
@@dailydronejourney my current version is 1.04.00.00
It still works.
I got 4 ch on 40mhz, 8 ch on 20mhz, 8 ch on 10mhz
Ini berlaku buat g2 jg kah ?
Ini buat mode manual bang?
Iya bisa dipilih...boleh manual maupun auto...
@@suswidianto klau auto it apa.bang mode normal kh?
Meaning sir
did not get it to work :/
Did it work in the end? Thanks
@@JohnnyEscobar1 yeah it did! Works now on my integras and goggle 2
@@timoklap that’s great to hear. 👍 Which one do you prefer out of your googles? The Integra or google 2?
@@JohnnyEscobar1 i use goggles 2 most of the time. Has sound.. boots up quicker. Slightly wider feald of view, they turn off screen automaticly when take off head. Can change battery.
@@timoklap perfect. Makes sense. thank you so much for replying. 👍👍👍
anyone could translate the one reminder at 5:00 mark?
tia iam using runcam wasp and integra only can seem to max out at 40mbps and not 50mbps
basically saying leaving it on auto is your best bet on longetivity afterwards, it will choose best range for long range out of the 17 channels
set on manual transmission, bandwidth 40 Mhz, Ch 3. I corrected the statement in the video, regarding setting transmission on automatic, it's best not to do it. In fact, when it's done, the bandwidth instead chooses to 20 and 10 Mhz and the bitrate will drop to 4 fps. Especially for longrange always set to manual transmission, 40 MHz bandwidth,Ch 3. Thank You.
@@suswidiantothanks for the tip!
stament yang di atas ini baiknya di pin atau di remarks di deskripsi aja om.@@suswidianto
can somebody tell me if b3yond fcc still works with New DJI Goggles Integra Firmware Released (4/25/2023)? thx for info
Hi..Bro...after you unlock ce to fcc with the latest firmware, 'FCC'..still works..
The latest firmware.(V01.02.00.00)Just added support for dji mavic 3 and group of it...
Aerial drones, especially the DJI Mavic 3 and all its variations, now with this firmware, can use DJI Integra. Not as usual via mobile phones etc.
@@suswidianto thx for anserw man ;) have a nice day bro
@@suswidianto hey, I did the dcc hack but got no more range... do you know what's the problem?
@@fpviewz ,hi Bro..set manual transmission and bandwidth 40 MHz,CH 3..
Hi. Just got the new avata / integra firmware update that supports DJI FPV drone. I have tried the method shown in video many times but it does not seem to work for me. Would new firmware update have made it not work or is it something i am doing. Formatted sd card before i tried this each time. Any ideas ?