I just came across your video and I wanted to thank you, a lot of videos about this case assume that the first timers know more than they actually do, but I appreciate you keeping it very simple and going back to the basics. Thanks for your help, greatly appreciated!
I've always wanted to build a PC but not knowing where all the connectors go has been the part that has stopped me. Watching this video has exorcised that demon and maybe now I'm ready to give it a go. Thank you for this video
After searching for about 30 minutes on how to fix this, this is the one video that helped me completely. Thank you so much! I have the same system case, same fan hub, same everything. Following the video was super easy, very well made for beginners like me
Great video, have the same case and found this helpful right up to the end. Was just hoping for some demonstration on how to use the rgb hub with the motherboard. It does say in the case manual to hold the reset button down for 5 seconds after installing the motherboards rgb software. Will let you know
ASUS Prime B660M-A D4 LGA 1700(Intel 12th Gen) mATX Motherboard (PCIe 4.0, DDR4,2xM.2 Slots, 1Gb LAN, DP,2 x HDMI, Rear USB 3.2 Gen 2, Front USB 3.2 Gen 1 Type-C, Aura Sync)
@JohnnyDPCPlayground Thank you, Johnny! But, I still have a question. I know this motherboard is one with WiFi, but I still want to know if I can still use my ethernet cable to run it. Thanks.
@JohnnyDPCPlayground Sorry to ask another question, but I just wanted to ask if the Asrock B660m pro rs also supports the ARGB Input cable on the motherboard? Just trying to save some extra bucks 😅😅
i have the same montech case and i'm having an issue with it. when i bought it, everything worked fine, but after a few months, out of nowhere, when i turn on the computer, fans are spinning but ARGB ins't working. i have to disconnect the ARGB controller SATA/power cable and connect it again to the power supply, and then it works again. if i turn off my PC, when i turn it on again i have to do the same thing to get ARGB working. any ideas? i've been thinking of buying a new ARGB controller...
i did exactly that with the argb plugged to the mobo (b550m tuf plus) and wont sync with mobo rgb. It only syncs the case fans and wc fans that are plugged to the case controller rgb, but its different color than mobo and rams. Can u help?
Go to the product page and download the argb sync software this should hepwww.asrock.com/Graphics-Card/AMD/Radeon%20RX%206650%20XT%20Steel%20Legend%208GB%20OC/index.asp#Download
This was the best guide I have seen. I was struggling for hours before seeing this. This guy is the Bob Ross of the PC world.
glad to hear t
fr
Thank you so much, searched for hours online why my case Fans are not spinning until I found this video
I just came across your video and I wanted to thank you, a lot of videos about this case assume that the first timers know more than they actually do, but I appreciate you keeping it very simple and going back to the basics. Thanks for your help, greatly appreciated!
Dude you're a hero. Just finished building my 1st pc using the Montech Sky Two and didn't know you had to connect the sata cable.
Great video! Super informative. I just finished a build with this case and I could not sort out the fans and ARGB connections. It all works now.
Great to hear!
I've always wanted to build a PC but not knowing where all the connectors go has been the part that has stopped me. Watching this video has exorcised that demon and maybe now I'm ready to give it a go. Thank you for this video
After searching for about 30 minutes on how to fix this, this is the one video that helped me completely. Thank you so much! I have the same system case, same fan hub, same everything. Following the video was super easy, very well made for beginners like me
Glad it helped!
wow, nobody told me they needed sata power except you. thank you!
this man single handedly saved my entire pc build
Thank you so much. I was struggling for about 2 hours before I found you!
really helpful for me as a beginner trying to build with this case, thank you!
Glad to hear it!
This video was excellent. The steps were clear and easy to follow.
Great to hear!
This will definitely be helpful for the beginners. Thank you.
Glad it was helpful!
Fans are overlooked by pc builders and aren't ever explained well, well done.
Thank you so much good sir,
I'm gonna build my new pc with this montech air 100 argb ❤
Hope everything is ok and normal
Great video, have the same case and found this helpful right up to the end. Was just hoping for some demonstration on how to use the rgb hub with the motherboard. It does say in the case manual to hold the reset button down for 5 seconds after installing the motherboards rgb software. Will let you know
Hey, did it work holding down the button for 5 seconds? I got the same case
God bless you!! I was stressed
Thank you so much!, i have a question. I don't have any 3 Pin on my Motherboard, is there anything that i can use to connect the ARGB Input?
Well i actually fixed the problem myself by buying a better motherboard....
Thanks helped a lot I was stressed about the fans not working
Hero, got my arb lights working again!
I did get it to work, you have to time the hold just right.
Can I control the fan RGB through the case button if I don't plug in the ARGB header? My motherboard doesn't have it
Exactly what I was looking for, great video.
Я русский, но даже не смотря на то что я не знаю английского, я все понял🎉Вы молодец
thank you
Excellent solution, thanks for the help! 5 stars!
You Saved me thank you
Thank you!
LEGEND
if my mother board doesnt have any 3 pin connectors how to i connect the argb input?
Amazing video. Thank you so much!!
thank you sir you fix one of my problems, my second problem is my pc keeps turining off idk why
Thanks 😊
Thank you sir
underrated creator!!!!!!!!!!!!
love the grandpa style
You wouldnt happen to have a cable management video for this case would you?
Can you change the speed of the fans?
yes using your motherboard soft ware or from the bios of your motherboard
THANK YOU
Thank you for the tutotial! Just wondering what motherboard you were using in the video? Coming from a beginner builder 😅
ASUS Prime B660M-A D4 LGA 1700(Intel 12th Gen) mATX Motherboard (PCIe 4.0, DDR4,2xM.2 Slots, 1Gb LAN, DP,2 x HDMI, Rear USB 3.2 Gen 2, Front USB 3.2 Gen 1 Type-C, Aura Sync)
@JohnnyDPCPlayground
Thank you, Johnny! But, I still have a question. I know this motherboard is one with WiFi, but I still want to know if I can still use my ethernet cable to run it. Thanks.
@JohnnyDPCPlayground
Sorry to ask another question, but I just wanted to ask if the Asrock B660m pro rs also supports the ARGB Input cable on the motherboard? Just trying to save some extra bucks 😅😅
yes it does
yes you can and this motherboard does not have built in WIFI
Danke dir hab es endlich geschafft amk
Thanks
Do you know where the usb 3.0 goes?
What Argb hub did you use in the p30 zalman case it didnt come with one Having trouble
My issue is that it takes a long time for them to light up. Sometimes like 20 minutes after turning on my computer. I am not sure why.
Awesome video!
You saved hours of time and more money wasted. Can't thank you enough.
i have the same montech case and i'm having an issue with it. when i bought it, everything worked fine, but after a few months, out of nowhere, when i turn on the computer, fans are spinning but ARGB ins't working. i have to disconnect the ARGB controller SATA/power cable and connect it again to the power supply, and then it works again. if i turn off my PC, when i turn it on again i have to do the same thing to get ARGB working. any ideas? i've been thinking of buying a new ARGB controller...
Hi sounds like the ARCB hub isn't working correctly, i would install a new ARCB hub, That would be my best guess.
good day! is it possible to add another argb fans and hook it up to the lighting controller? thanks johnny
You can daisy chain ARGB fans.
I don’t have a pin on my motherboard and everything is already connected but fans just don’t spin they have led tho
Hello, my motherboard is biostar b660mx-e and it has no 3 pin header to connect the argb input cable. fans are running but no lighting. What to do
hi, it sound like the ARGB is not getting power, check to see if you connected the SATA power to the ARGB Hub. Could be one reason .
@@JohnnyDPCPlayground it was connected. I also tried changing sata power cable, but still no lighting
ok, i would just replace/buy a new ARGB Hub , I think that would be the easiest solution, sorry i could be more help.
@@JohnnyDPCPlaygroundok, i will take the suggestion. Thanks a lot for the hard work
It looks like there's 2 more open connections on that hub. Does that imply I can add 2 more ARGB fans to it?
Yes you can
This help a lot but when I turn it in and plug it into my monitor it says no single is there any way u can help?
Make sure you plug in your cable into your GPU if you already haven't, instead of the io shield port
Can i connect it to SYS 1?
i did exactly that with the argb plugged to the mobo (b550m tuf plus) and wont sync with mobo rgb. It only syncs the case fans and wc fans that are plugged to the case controller rgb, but its different color than mobo and rams. Can u help?
Go to the product page and download the argb sync software this should hepwww.asrock.com/Graphics-Card/AMD/Radeon%20RX%206650%20XT%20Steel%20Legend%208GB%20OC/index.asp#Download
The fix is that u have to press the case's led button for 3 seconds to sync with asus aura.
Now why in the heck is the reset your lighting options button lol
I did this but only two of my case fans will spin, but all them are lighting up, can anyone help me out?
Can i also use just the fans ant not the rgb? I dont want the colours
yes you can
is there a software for this?
what if mother board doesn’t have as much pins as others
I've had my build in this case for about 10 months now and the ARGB randomly stopped working this week. Any ideas
The same thing happened to me. Did you find a solution?
@@waughwerks1585 solution?
You never said where the rgb connection goes on the motherboard.