Ferguson FE35 Grey and Gold Restoration Part 11 Fitting the Axle Housings and Diff Center

As the title describes in this video I replace the trumpet housings and the diff center.
Parts seen in this video can be purchased from.
www.queenslandtractorspares.com.au or call 1300 850 097 in Australia.
If the parts you need is not on our web site, Ph1300 850 097 and talk to us directly.
or
E Mail: [e-mail]
or
Worldwide, www.sparex.com/ and look for a dealer in your area.

[@terjer8069]

Thank you for helpful videos,I overhauled my diff in aTEF 20.It went very well.

[@BundyBearsShed]

Thankyou, Im glad it helped.

[@AmateurRedneckWorkshop]

G'day Lance. You are moving right along with the tractor.

[@BundyBearsShed]

G Day Harrold, Yeah I got a good run on it last weekend. Sanding coming up so things will slow up for sure.

[@BleuJurassic]

the only time I use gasket goo is watered down with some thinners on water pumps that dont like to seal you only need a film of it for it to work not in gobs of it and work quickly so it works as a sealer, or get things remachined to fit ! grins

[@BundyBearsShed]

Yeah no need for it most times. boy do we see some messes from the silicone products.

[@ShainAndrews]

Careful... you keep going at this pace you will have a restored tractor on your hands

[@BundyBearsShed]

Yeah these videos are all from last weekend, it will slow up with sanding coming up.

[@anthonygostling]

I always have used oil on the gasket, with no problems, but that just me..!

[@stevecallachor]

When r u going to do the PTO SHAFT, it looks like the dogs been pissing on it!!!
Steve Callachor
North Avoca. N S W

[@BundyBearsShed]

G Day Steve, Yes very soon, the bloody dog must have a shifter to pee on it as it lives with the cap on.

[@marcellorussotto8287]

Hi Lance, i have a question for you, i have an MF35x, can i use a 15/40 trasmission olio in the gearbox ?i use it for shredding and plowing! Thanks and sorry for my english!!!😉

[@BundyBearsShed]

Yes you can

[@marcellorussotto8287]

@@BundyBearsShed thanks 👍

[@workwithnature]

What type of iron is the casing?

[@BundyBearsShed]

Im not sure I always thought just cast iron.

[@frankcurran6149]

hi lance removed trumped housing to replace lower bolt for linkage and found a bolt missing from crown wheel have looked every where and used a magnet around every and cant find it wondering have you came across this problem bbefore and if so where did you find it. any help would be great wonderful regards frank love your videos

[@BundyBearsShed]

They often come loose but it is usually still there from what I have seen.

[@dino_cruncher]

thanks Lance

[@brijmohanray8738]

Brijmohan ray

[@BundyBearsShed]

Thanks.