Oh man... this is HUGE! ... I've never worked on a Presonus/Clarett rig, but I'm saving this in my "favorites" in case I ever do. Really great information.
Unless you set your sends as "pre" (which you did not), it doesn't make any sense to copy the levels of your mixer into your send levels. You want to put all sends at 0dB, so they send your current mixer volumes, and from there, put more or less level on specific channels. The way you did it, a channel that you have in your mixer as +12dB (like your FT.02 channel) will send +24dB to the headphones. Also, any change you make in your mixer still affects the headphones mix. Now, if you set those sends as "pre", then yes, you need to copy your mixer levels to the send levels in order to have the same initial mix, and as they are in "pre", they don't get affected by changes in your mixer. Personally, I'd go with the first option and set the initial level of the sends to 0dB and not setting the sends as "pre".
It's very different than how Focusrite sets up their headphones mix. I may try this method on my next recording and see which one is more user-friendly. This is usually how you set up foldback mixes on a typical analog console. Thanks for sharing!
So I got to try this a bit more this morning and this is what I found. Let me know if you have encountered any similar issues. Personally, your method is a much more efficient way of working, since you don't have to switch screens when creating headphone mixes and adjusting levels. 1. I set all the Sends to Pre Fade listen. This way, if I want to solo a channel (to monitor), it does not interfere with the artist's headphone mixes. 2. On the Focusrite Control, I had to set the Outputs to the corresponding mixes. For example, let's say we're making a different mix using Outputs 7-8 (from Outputs 1-2 which are the monitors), if you leave the output to Playback 1-2 (or Custom Mix), then it's going to send both mixes to that one channel (because every out listens to Playback 1-2, unless you change it). Once take out "Custom Mix" , the screen shows the "routing" of the that particular output. So I have to go back to Outputs 1-2 (Monitors - which are set to Custom Mix), to adjust and add the channels. When you get a chance, try muting the sends from the channel strips and see if the signal is still going through if all the Outputs on the Focusrite Control are all set to "Custom Mix." Together, I think we can troubleshoot and set up a more efficient routing solution than the one Focusrite suggest. Thanks! \m/
I think I understand what you are saying. Correct me if I'm wrong. 1. If I set up a headphone Mix in PT using a send? I select all of the tracks and add a send to all of the them. PT then creates an AUX track. I set it's output to 7/8 or 9/10. 2. I then go to Focusrite Control and scroll down to 7/8 and set it up as Custom Mix. And I add 7/8. Here's the trick. 3. If I 7/8 as a track on outputs 7/8 within focus rite control, it is also added to all of the other outputs. 4. so, You can a- mute 7/8 on all of the other outputs or B. set the outhe outputs not as a custom Mix but as a direct monitoring. Does this make sense? I will try to check the scenario you described above today.
Nice tutorial but I am working with Fl Studio and want to buy the Scarlett 6i6, is there an option to set up que mixes in that DAW too? There are no tutorials for it on yt :/
how about sett my 4i4 with ext compressor with line input 3-4, when i changed its not sound with my headphone, but its true sound with mu monitor speaker
sorry for the dumb question, just have to be sure. So, i can assign individual tracks in my DAW to the output of my choice on the PREX as i want to use VSTS in real time for live performance etc. The PREX outputs would go into line in on my mixer. Cheers :)
Thanks man very helpful. I'm using logic but it should be the same configuration. I do have a headphone amp 6 channels a focusrite 8prex and a octopre - just got the octo. I saw u just put the guitar if I have a whole band I just do the same to every instrument ?
Hi Eduardo. Sorry for the Late Reply. To answer your question " Do I have to do the same to every instrument?:" the Answer is no. In the video you saw me create a BUS ( An Aux Track in Pro Tools). That bus is specially used to send Audio to my headphone amp. So My headphone amp is routed via outputs 7&8 and 9&10 so I have the ability to have two separate mixes. Then I went back to all of my tracks and told each track to send audio to my Cue Mix ( 7&8). I now can send a little guitar, a little bass, a little drums. If you want more then one cue mix if you are recording a full band, you have to create the Buses that match the number of mixes you can have in your headphone amp. If your headphone amp only can take two then you only need two Buses. Then you set the bus on each track. For example. If you have two cue mixes, you can go to your guitar track and send guitar to Cue mix 1 and two ( Bus 7-8) don't forget, you have to assign the output of your interface on the bus channel that's going to take the Audio from Daw to your Headphone amp. Ok, no you want to send bass to only one CUe mix. Go to the bass track and only send bass. You do this for every track. Does that make sense? Don't hesitate to ask any more questions. All the best. George.
Great video, thank you! I have one issue though... when I go to record I am getting a delay or a lag in the headphones, any reason to why this is happening? I have my setting exactly how you set up but its creating a delay and its driving me crazy... playback engine doesn't effect it either, tried that... please help. Thank you
Would you have actually had to do any of the work in the Clarett software? It seems like all of that could have been done right in PT and still worked the same way.
So the HP Amp1 had been routed to output 7-8 in the Pro Tools but then, in the Mix Control you routed HP1 to the playback 1-2. Guitarist should have no sound in that scenario, am I right?
Instead of an Aux, create another Master Fader output. This will eliminate to possibility of someone using a send on that track and creating a feedback loop.
Studio73.rocks that’s a good question. If you did it that way, you would only get left on 7, right on 8. They wouldn’t be mono mixes. They would be left and right. But you can also use your other outputs. 3-4/5-6/
At the way end of the video you said you can use the front headphone amps (which you labeled HP1 'Output 7-8' and HP2 'Output 9-8) and the outputs (7-8, 9-10) in the back as well. Would it be getting the same signals or can you route totally different signals to the Output 7-8 in the front and the Output 7-8 in the back?
I can not get the sends to appear - when I push shift option control then select aux stereo track from send A nothing happens - what am I doing wrong? I have selected all the tracks and have all selected. I am on a Mac with latest version of Pro Tools. Does it matter the I have Saffire Pro 40 right now - I will be getting Focusrite Clarett 8Pre Tuesday. I just want to learn how to get the sends and aux track to appear - Please Help
I have the Scarlett 6i6 and I can't figure out how to play the system sound ( sound from my computer; youtube, sound cloud etc ) while being able to hear the sound coming from my yamaha synthesizer that I have plugged in to the rear line level inputs 3 and 4 for a stereo signal. I am able to switch between listening to one or the other, but I would like to be able to hear them both at the same time. For example, when I am preparing for a gig, I like to play along on my synthesizer with a song from TH-cam so I need to be able to hear them simultaneously. With my old interface this wasn't an issue, but this Scarlett is very confusing.
If you are on a mac, make sure you go to your sound setting and select your interface for sound output. Are you hearing the system sound at all through your computer? If you are, you have to change it.
Can you tell me how you have FC Control set up. What do you have going on on output 1-2 and 3-4? Can you share a Picture? just place a dropbox link here.
Hi George,For what I have seen so far you have one of the best demonstration Videos here on YT..Job Well Done..However,Do you have any Videos Setting up Cue Mixes For Studio One V 3..I have and just got the Focusrite Scarlett 18i20 but your Clarett 8Pre will do for demonstration purpose..Although its a bit of a learning curve of the Focusrite Control as to I'm new to the Control and the Hardware,.... Not because of you, but I must say, I'm a bit throwing off of you demoing of Setting up Cue Mixes with Pro Tools.. As of right now,i'm just getting along using the Focusrite Control Presets (Analog 2 and 8) as to I have no clue to what I'm doing setting up Custom Mixes other than just Trial and Error without any success..LOL.. Cue Mixes For Studio One V 3 would be cool if you could demo that.. Thank You, Rob..
I’m having a feedback issue, when I insert more then one hardware on a track I will get a double. I then would go to Focusrite control to turn fader down which allows me to hear nothing on that channel. I’ve tried muting also still nothing. All my inputs and out puts matches with Protools. My connections is correct, I’m using balanced cables. Focusrite control line outputs matches playback inputs. I’m using Focusrite clarett 8pre all connections is used.
OK. You shouldn’t have a feedback loop going if you mute the track just play with it you’ll get to it you’ll figure it out. It took me a little bit, but you have to play with muting the tracks and because you will get a feedback if the tracking your daughter is not muted or something like that don’t remember I don’t have the clarrette anymore so I haven’t used it in a little bit but I remember that exact issue just play with it you’ll get there
@@PintoMusicHTX I found a work around which was to put my tracks on a Aux bus and then lower the focusrite control , very weird but this worked for me..
Hi George, I really like what you do. When I try and route the cue mix to 7 & 8 though the only output that's available is output 1&2. The other outputs appear but at the end read: A 7-8 path n/a? Am I doing something wrong?
Hi George, I finally worked it out for myself, what I was doing wrong. As I've only had about 6 months experience with Protools and I'd just purchased the Clarett 8 Pre X I hadn't set the I/O for 8 Pre X properly in Protools. After reviewing the Installation Video and realised what was wrong. Thanks again for all your posts they are a lot more informative than other videos on TH-cam. Thumbs Up:)
I Think I Was Tricked Into Buying The 18i20. I don't Have a guitar, drum set etc. I only have two mic's a MPC Touch and 4 monitor speakers. A Home Studio as One would put it. Now My Dream Is Go All the way, But financially speaking and a working environment do I need the 18i20 or the 6i6 which lets me connect all 4 of monitor speakers ?
Financially speaking, 200$ difference. The 6i6 has enough outputs for two monitors and one headphone amp. The 8i20, has plenty outputs for way more then that. All the best. George!
Music Production Alliance Your professional opinion, should I keep the 18i20 and go for 6i6. It's not like I'm gonna be recording a live band, Just vocals and use my MPC Touch which has its own Interface.
I love how the sends output was Mon 1-2 then magically Out 7-8 same with the software for the preamp. It was playback 1-2 then magically playback 7-8. Great video but I think what needs to change is that you need to be more confident and also skip the other parts of groups and the global attributes etc because this video is about setting up the headphone sends not how they're group etc.
This is insanely confusing. 4:10 "send guitar cue to outputs 7,8." 5:04 "I'm gonna add playback 1,2" But you put the guitar cue on 7,8; shouldn't you be adding Software playback 7,8? 5:22 "You can see that the audio is coming out the focusrite control". Okay... 5:33 "If you grab your headphones, ... you may not hear any audio at this point." But you just said... 5:54 "my outputs going to outputs 7,8" (Then you show your focusrite control software)...but WHOA! You changed it! Without telling us!? So at 5:22, that was the main outputs coming to the headphones, not the guitar cue. Maybe you should have said something? 5:59 "Notice there's no audio coming out." Oh, surprise! On the one hand, I learned a lot by watching this video, but it was in *spite* of your instruction. This is complicated stuff already, when you do switcheroos off camera, it doesn't help anyone.
I agree with you dartme18. I was following along great until the 5:04 - 5:54 part. Also, I wondered what was his I/O setups in Pro tools as well. I restored to default on my Focusrite Control app and inside Pro Tools I/O inputs, outputs and buses.... Dartme18 have you figured it out since there has been no response for 5 months?
Don't forget to put your sends in pre so you can refine the master mix without changing the HP mix.
You have just saved me another sleepless night. Thank you!
I can't tell you how helpful this was! Thank you from a Scarlett 18i20 user!
singlemanstudios you just did :-) all the best George
This is still great in 2021! Thank you soooo much!
Great video! Thank you for saving me hours of frustration.
Michael Douglas no worries. Glad to help
Oh man... this is HUGE! ... I've never worked on a Presonus/Clarett rig, but I'm saving this in my "favorites" in case I ever do. Really great information.
Awesome
Thanks so much! I've been trying to figure this out for a while (noob). I think with this video I finally got it!
Thank you so much for this video! I can do the separate cues now.
THANK YOU !! Finally understand how to setup a headphone mix 🍻
Thanks man, really good tut. Using my 8pre really fast thanks to you!
ThePhantomJack awesome. All the best!!!
This video is so much more helpful than the manual, cheers dude
Brad Telfer Audio hahah. Cool. All the best. George.
You can also route the incoming signals to the different outputs in the mix control software.
Very Informative! Been looking for some info like this for a while. Glad I found your channel!
Excellent. Thanks for watching
Excellent. Thanks for watching
This video is great! Thank you. I'm having issues getting the output to our monitors from the monitor output.
What step are we missing?
Thanks.
Fabulous, really helped!
Unless you set your sends as "pre" (which you did not), it doesn't make any sense to copy the levels of your mixer into your send levels. You want to put all sends at 0dB, so they send your current mixer volumes, and from there, put more or less level on specific channels. The way you did it, a channel that you have in your mixer as +12dB (like your FT.02 channel) will send +24dB to the headphones. Also, any change you make in your mixer still affects the headphones mix. Now, if you set those sends as "pre", then yes, you need to copy your mixer levels to the send levels in order to have the same initial mix, and as they are in "pre", they don't get affected by changes in your mixer. Personally, I'd go with the first option and set the initial level of the sends to 0dB and not setting the sends as "pre".
It's very different than how Focusrite sets up their headphones mix. I may try this method on my next recording and see which one is more user-friendly.
This is usually how you set up foldback mixes on a typical analog console.
Thanks for sharing!
Cool. No problem.
So I got to try this a bit more this morning and this is what I found. Let me know if you have encountered any similar issues. Personally, your method is a much more efficient way of working, since you don't have to switch screens when creating headphone mixes and adjusting levels.
1. I set all the Sends to Pre Fade listen. This way, if I want to solo a channel (to monitor), it does not interfere with the artist's headphone mixes.
2. On the Focusrite Control, I had to set the Outputs to the corresponding mixes. For example, let's say we're making a different mix using Outputs 7-8 (from Outputs 1-2 which are the monitors), if you leave the output to Playback 1-2 (or Custom Mix), then it's going to send both mixes to that one channel (because every out listens to Playback 1-2, unless you change it). Once take out "Custom Mix" , the screen shows the "routing" of the that particular output. So I have to go back to Outputs 1-2 (Monitors - which are set to Custom Mix), to adjust and add the channels.
When you get a chance, try muting the sends from the channel strips and see if the signal is still going through if all the Outputs on the Focusrite Control are all set to "Custom Mix."
Together, I think we can troubleshoot and set up a more efficient routing solution than the one Focusrite suggest. Thanks! \m/
I think I understand what you are saying. Correct me if I'm wrong.
1. If I set up a headphone Mix in PT using a send? I select all of the tracks and add a send to all of the them. PT then creates an AUX track. I set it's output to 7/8 or 9/10.
2. I then go to Focusrite Control and scroll down to 7/8 and set it up as Custom Mix. And I add 7/8. Here's the trick.
3. If I 7/8 as a track on outputs 7/8 within focus rite control, it is also added to all of the other outputs.
4. so, You can a- mute 7/8 on all of the other outputs or B. set the outhe outputs not as a custom Mix but as a direct monitoring.
Does this make sense?
I will try to check the scenario you described above today.
Thank dude !! Well explained ...
can you connect headphones into the line ouputs on the back if you have more musicians ?
If I just press option I can get it to work - instead of shift control option - Thanks
This was so helpfull, Thank u very much!
DoubleUD TRO great to hear. All the best
Nice tutorial but I am working with Fl Studio and want to buy the Scarlett 6i6, is there an option to set up que mixes in that DAW too? There are no tutorials for it on yt :/
Dude this video is tricking awesome
Glad you like it
What would all of this look like in Logic Pro X? Thank you...
how about sett my 4i4 with ext compressor with line input 3-4, when i changed its not sound with my headphone, but its true sound with mu monitor speaker
Great job explaining everything dude! I’m loving the Clarett so far. Do you like it?
sorry for the dumb question, just have to be sure. So, i can assign individual tracks in my DAW to the output of my choice on the PREX as i want to use VSTS in real time for live performance etc. The PREX outputs would go into line in on my mixer. Cheers :)
Not a dumb question. That is correct. George.
Thanks man very helpful. I'm using logic but it should be the same configuration. I do have a headphone amp 6 channels a focusrite 8prex and a octopre - just got the octo.
I saw u just put the guitar if I have a whole band I just do the same to every instrument ?
Hi Eduardo. Sorry for the Late Reply. To answer your question " Do I have to do the same to every instrument?:" the Answer is no. In the video you saw me create a BUS ( An Aux Track in Pro Tools). That bus is specially used to send Audio to my headphone amp. So My headphone amp is routed via outputs 7&8 and 9&10 so I have the ability to have two separate mixes. Then I went back to all of my tracks and told each track to send audio to my Cue Mix ( 7&8). I now can send a little guitar, a little bass, a little drums. If you want more then one cue mix if you are recording a full band, you have to create the Buses that match the number of mixes you can have in your headphone amp. If your headphone amp only can take two then you only need two Buses. Then you set the bus on each track. For example. If you have two cue mixes, you can go to your guitar track and send guitar to Cue mix 1 and two ( Bus 7-8) don't forget, you have to assign the output of your interface on the bus channel that's going to take the Audio from Daw to your Headphone amp. Ok, no you want to send bass to only one CUe mix. Go to the bass track and only send bass. You do this for every track. Does that make sense? Don't hesitate to ask any more questions. All the best. George.
Great video, thank you! I have one issue though... when I go to record I am getting a delay or a lag in the headphones, any reason to why this is happening? I have my setting exactly how you set up but its creating a delay and its driving me crazy... playback engine doesn't effect it either, tried that... please help. Thank you
Great video! To be clear, the Clarett 8 PreX can only send out 4 individual stereo headphone mixes, correct? 3/4, 5/6, 7/8, and 9/10?
Would you have actually had to do any of the work in the Clarett software? It seems like all of that could have been done right in PT and still worked the same way.
No confusion at all, thank you !!!
Whatever my little heart desires eh? Lol
So the HP Amp1 had been routed to output 7-8 in the Pro Tools but then, in the Mix Control you routed HP1 to the playback 1-2. Guitarist should have no sound in that scenario, am I right?
Good video but i dont have the oitpits from pro tools
Instead of an Aux, create another Master Fader output. This will eliminate to possibility of someone using a send on that track and creating a feedback loop.
This Was A Good Learning Experience, Than You. Does This Process Works For The 18i20 Focusrite As Well And How I Make Work With 4 Monitor Speakers
Carlos Manlaw Cho yes it does.
*Fricking AWESOME
yeahhhhh. George
Hey man Thanks , So how does it work if you want 4 headphone mixes and you just use 7 for one mix 8 for one mix and so on does that work ?
Studio73.rocks that’s a good question. If you did it that way, you would only get left on 7, right on 8. They wouldn’t be mono mixes. They would be left and right. But you can also use your other outputs. 3-4/5-6/
At the way end of the video you said you can use the front headphone amps (which you labeled HP1 'Output 7-8' and HP2 'Output 9-8) and the outputs (7-8, 9-10) in the back as well. Would it be getting the same signals or can you route totally different signals to the Output 7-8 in the front and the Output 7-8 in the back?
Same signal
Thanks Steve
Now we need a video showing how to set up your inputs please Thanks
I can not get the sends to appear - when I push shift option control then select aux stereo track from send A nothing happens - what am I doing wrong? I have selected all the tracks and have all selected. I am on a Mac with latest version of Pro Tools. Does it matter the I have Saffire Pro 40 right now - I will be getting Focusrite Clarett 8Pre Tuesday. I just want to learn how to get the sends and aux track to appear - Please Help
Lyle Vickerman it shouldn't matter. Can you do it from the track menu? You should see sends on fader on one of the menus
I am picking one up today after working with MOTU 896 mk 3 horrible
Oh man. You're going to love it!!! All the best. George.
I have the Scarlett 6i6 and I can't figure out how to play the system sound ( sound from my computer; youtube, sound cloud etc ) while being able to hear the sound coming from my yamaha synthesizer that I have plugged in to the rear line level inputs 3 and 4 for a stereo signal. I am able to switch between listening to one or the other, but I would like to be able to hear them both at the same time. For example, when I am preparing for a gig, I like to play along on my synthesizer with a song from TH-cam so I need to be able to hear them simultaneously. With my old interface this wasn't an issue, but this Scarlett is very confusing.
If you are on a mac, make sure you go to your sound setting and select your interface for sound output. Are you hearing the system sound at all through your computer? If you are, you have to change it.
Music Production Alliance Yes, I have the settings in my mac set to the Scarlett for both the input and output.
Can you tell me how you have FC Control set up. What do you have going on on output 1-2 and 3-4? Can you share a Picture? just place a dropbox link here.
Hi George,For what I have seen so far you have one of the best demonstration Videos here on YT..Job Well Done..However,Do you have any Videos Setting up Cue Mixes For Studio One V 3..I have and just got the Focusrite Scarlett 18i20 but your Clarett 8Pre will do for demonstration purpose..Although its a bit of a learning curve of the Focusrite Control as to I'm new to the Control and the Hardware,.... Not because of you, but I must say, I'm a bit throwing off of you demoing of Setting up Cue Mixes with Pro Tools.. As of right now,i'm just getting along using the Focusrite Control Presets (Analog 2 and 8) as to I have no clue to what I'm doing setting up Custom Mixes other than just Trial and Error without any success..LOL.. Cue Mixes For Studio One V 3 would be cool if you could demo that.. Thank You, Rob..
HI Rob. Sorry for the late reply. Your comment went to spam for some reason. I will try to do this video this week. All the Best. George
That's Awesome George,Not a Lot of People Would Do That Let Alone Even Respond..Enjoy Your Memorial Day Weekend..Best Rob..
I’m having a feedback issue, when I insert more then one hardware on a track I will get a double. I then would go to Focusrite control to turn fader down which allows me to hear nothing on that channel. I’ve tried muting also still nothing. All my inputs and out puts matches with Protools. My connections is correct, I’m using balanced cables.
Focusrite control line outputs matches playback inputs. I’m using Focusrite clarett 8pre all connections is used.
OK. You shouldn’t have a feedback loop going if you mute the track just play with it you’ll get to it you’ll figure it out. It took me a little bit, but you have to play with muting the tracks and because you will get a feedback if the tracking your daughter is not muted or something like that don’t remember I don’t have the clarrette anymore so I haven’t used it in a little bit but I remember that exact issue just play with it you’ll get there
@@PintoMusicHTX I found a work around which was to put my tracks on a Aux bus and then lower the focusrite control , very weird but this worked for me..
@@prodcountryjames . Keep playing with it. I’m sure you will find other solutions.
Hi George, I really like what you do. When I try and route the cue mix to 7 & 8 though the only output that's available is output 1&2. The other outputs appear but at the end read: A 7-8 path n/a? Am I doing something wrong?
What interface do you have?
forcusrite Clarett 8 prex, like yours?
Watching your video's convinced me to purchase one.
Hi George, I finally worked it out for myself, what I was doing wrong. As I've only had about 6 months experience with Protools and I'd just purchased the Clarett 8 Pre X I hadn't set the I/O for 8 Pre X properly in Protools. After reviewing the Installation Video and realised what was wrong. Thanks again for all your posts they are a lot more informative than other videos on TH-cam. Thumbs Up:)
JJAR STUDIOS excellent
I Think I Was Tricked Into Buying The 18i20. I don't Have a guitar, drum set etc. I only have two mic's a MPC Touch and 4 monitor speakers. A Home Studio as One would put it. Now My Dream Is Go All the way, But financially speaking and a working environment do I need the 18i20 or the 6i6 which lets me connect all 4 of monitor speakers ?
Financially speaking, 200$ difference. The 6i6 has enough outputs for two monitors and one headphone amp. The 8i20, has plenty outputs for way more then that. All the best. George!
Music Production Alliance Your professional opinion, should I keep the 18i20 and go for 6i6. It's not like I'm gonna be recording a live band, Just vocals and use my MPC Touch which has its own Interface.
If you can sell the 18i20 and get a 6i6 for cheap, then I would do that.
Music Production Alliance im with in my return or exchange policy. Any other equipment I Should Go For
Carlos Manlaw Cho studio monitors. Yamaha HS series are good.
I love how the sends output was Mon 1-2 then magically Out 7-8 same with the software for the preamp. It was playback 1-2 then magically playback 7-8. Great video but I think what needs to change is that you need to be more confident and also skip the other parts of groups and the global attributes etc because this video is about setting up the headphone sends not how they're group etc.
Scott Atkins hey. Thanks for the feedback
Step #1 Switch to Logic Pro
Step #2 Repeat process
Thought the same but with cubase lol
This is insanely confusing. 4:10 "send guitar cue to outputs 7,8."
5:04 "I'm gonna add playback 1,2" But you put the guitar cue on 7,8; shouldn't you be adding Software playback 7,8?
5:22 "You can see that the audio is coming out the focusrite control". Okay...
5:33 "If you grab your headphones, ... you may not hear any audio at this point." But you just said...
5:54 "my outputs going to outputs 7,8" (Then you show your focusrite control software)...but WHOA! You changed it! Without telling us!? So at 5:22, that was the main outputs coming to the headphones, not the guitar cue. Maybe you should have said something?
5:59 "Notice there's no audio coming out." Oh, surprise!
On the one hand, I learned a lot by watching this video, but it was in *spite* of your instruction. This is complicated stuff already, when you do switcheroos off camera, it doesn't help anyone.
I agree with you dartme18. I was following along great until the 5:04 - 5:54 part. Also, I wondered what was his I/O setups in Pro tools as well. I restored to default on my Focusrite Control app and inside Pro Tools I/O inputs, outputs and buses.... Dartme18 have you figured it out since there has been no response for 5 months?
confused as f%^k...but bot your fault. The program seems quite counter intuitive and covoluted to me (noob)