Here! New Version of Cup(2019): th-cam.com/video/HpORDk5KvMM/w-d-xo.html It's better to understand how to make this model!! Tinkercad Basic Tutorials: bit.ly/2tdurvk
I made my rim of the cup thicker, and it turned out great! I had a little trouble making the hole, and cutting off the words. It was a little complicated, bt it was a fun tutorial, and the cup is very pretty!
thanks for the upload! I'm new to Tinkercad and didn't understand how u got the contour following text, got it now after the slow down version of your korean video. That was smart, cheers!
this really wasnt a tutorial. was more of "look what you can do" kind of thing... Maybe the description should read more accurately "Interesting videos of people doing things"
The end is very confusing because I'm not sure why you're doing any of these steps. The two sentences you put in were helpful but then you did a lot more and completely lost me. Maybe a list of steps alongside your video or an explanation playing in the background would be more helpful.
th-cam.com/video/mSUwOk-ULPA/w-d-xo.htmlm22s This video is the same and slow. But it is Korean. To make the cup you should know to use of 'ctrl+D' and 'shift+alt' function.
Here! New Version of Cup(2019): th-cam.com/video/HpORDk5KvMM/w-d-xo.html
It's better to understand how to make this model!!
Tinkercad Basic Tutorials: bit.ly/2tdurvk
@Sebastian Udumets probably cause this video is fucking faster than a fuckboy
@@adrijuslazdauskas2742 // Created by TECH PRO
// th-cam.com/users/techprotechpro
# define GREEN 2
# define ORANGE 3
# define RED 4
# define Buzzer 5
# define Sensor A0
void setup() {
for (int i = 2; i < 6; i++)
pinMode(i, OUTPUT);
Serial.begin(9600);
}
void loop()
{
for (int i = 2; i < 6; i++)
digitalWrite(i, LOW);
status_Indicator();
}
void status_Indicator()
{
int sensor_In = analogRead(A0);
Serial.println(sensor_In);
if ( sensor_In >=400 )
{
digitalWrite(RED, HIGH);
digitalWrite(Buzzer,HIGH);
}
else if (sensor_In >=160 )
{
digitalWrite(ORANGE, HIGH);
} else
{
digitalWrite(GREEN, HIGH);
}
delay(10);
}
I made my rim of the cup thicker, and it turned out great! I had a little trouble making the hole, and cutting off the words. It was a little complicated, bt it was a fun tutorial, and the cup is very pretty!
im doing this for school so xd
Same💀
BRUH same
@@thesocialistmind9880 same💀
same
Same
Not clear, too fast.
If the video is fast, choose Slowly on TH-cam and watch the video.
Or the same video, It is slow. But another language.
th-cam.com/video/mSUwOk-ULPA/w-d-xo.html
I imported it into Final Cut to slow it down xD
@@dddlab35 herói qq
Very nice collection of various techniques... Thanks!
thanks for the upload! I'm new to Tinkercad and didn't understand how u got the contour following text, got it now after the slow down version of your korean video. That was smart, cheers!
You are welcome :)
can you tell me as i didnt get that also
But how do you print your designcs
If you feel the video fast, please press the gear icon under the video.
You can change and slow down the video speed.
Well done. Students can see the approach as to how to create the geometry.
Como debería hacer para que no quede mas redondo y no tan facetado ? Gracias
Nice
Very nice technique 😮😮😮😮😮😮
I am still learning, but this vid helps me thanks
Good luck 👍
Wow❤️ looks easy but not really 👍
how does the i love d e become flush too cup simply by grouping it?
Amazing
whats going on at 2 min mark with large red box???
i love this
how would you have the cup and the letters different colors
Each shape can choose one color. It would become one color when you make a group. At that time, you need to check the multicolor.
this really wasnt a tutorial. was more of "look what you can do" kind of thing... Maybe the description should read more accurately "Interesting videos of people doing things"
what did you do before you cut the top of parabola shape by clicking "group"?
Did you ask me about Ctrl+D function?
Check the new video. It will be better to understand.
th-cam.com/video/HpORDk5KvMM/w-d-xo.html
How do you get such a smooth refresh rate on your video?
hola, me gusta este video, pero lo que te queria consultar es que NO ME DEJA USAR LA OPCION DE AGRUPAR O DESAGRUPAR, COMO LA PUEDO ACTIVAR ?
Hay pasos como la del rellenos de la tasa, que no se entiende como se hace...Muy rápido...
when i export the file it exports it as a zip archive. Ive used this before and it worked fine but now it isn't
1:13 it's ctrl + c
Oh wait. Ctrl + D also works.
se pueden mejorar las curvas para que no queden con lados y queden completamente curvas?
Does the printer add the supports automatically or is that something you did off camera?
On Cura, the supports added when I printed the cup.
What does de stand for?
Decoration and toy?!
Im doing for my school
Great!
thanks! This is very good video
Thank you. Check new version too! th-cam.com/video/HpORDk5KvMM/w-d-xo.html
Thanks for teaching me I am your 1st follower😀
Great! I have a lot of videos for making 3d modeling. Enjoy the videos!
*Hello, it misses a tutorial on the basic "lessons" in "Learn": the glasses, the pawn, the rule etc.*
Tutorial videos to learn Tinkercad: goo.gl/lUWhrq
House Series: bit.ly/2TOlKUa
Inspired use oh holes to get the lovely rounded off text!
Name of app
Tinkercad!
thank you!! this video is very useful : )
A bit too complex!
wow good
Its really good and make more vids plz
Good job keep it up!
Muy bueno, gracias
İt is very good
Thank you :0 Did you see the new version of one? th-cam.com/video/HpORDk5KvMM/w-d-xo.html
Hola, alguien sabe como quitar un texto de un proyecto descargado? Ej :descargué un corazón que tiene texto Andrea pero el regalo es para Juana jaja
It is better to make new model than remove text! :)
なるほど～
❤
ok
Tîñkėr łóvē. I hasn’t had 3D printer =(
The end is very confusing because I'm not sure why you're doing any of these steps. The two sentences you put in were helpful but then you did a lot more and completely lost me. Maybe a list of steps alongside your video or an explanation playing in the background would be more helpful.
i got lost at 2:00
Who’s watching in 2024
Me
aoooo buongiorno del piero meglio di totti
Good
Sorry way to fast .. and need text or vocal.
Press the gear icon under the video.
You can slow down the video speed.
aguante duki
reconfirmo
also
gotta be easier way to make a cup
va muy rapido
hacerlo mas despacio joder
tienes razon jajajajja
recorcholis, que complicado!
es todo un laberinto hahah
los que lo sepan hacer tienen problemas! Garbanzos!
Si! Son todos unos bocachanclas! Pepinillo!
I can't pase taxt
gracias
.
hi guys
Je gaat veel te snel mensen die nieuw zijn en dit willen proberen kunnen niet volgen !
Or the same video, It is slow. But another language.
th-cam.com/video/mSUwOk-ULPA/w-d-xo.html
nice
can help me 1:54-2:01 ?
th-cam.com/video/mSUwOk-ULPA/w-d-xo.htmlm22s
This video is the same and slow. But it is Korean.
To make the cup you should know to use of 'ctrl+D' and 'shift+alt' function.
kilyan basallllllll
De JuN fan?
DE is my Korean name :)
Ниче не понятно!
Es mentira ni sale
ขอบคุณมากเลยนะครับที่ทำคลิปเเบบนี้มาให้ดูหนูจะสอบพอดีเลยครับ
Broken Program
to fast
cheese
I ❤️ de
tinkercad = doo doo
Like you
waste of time.
Suuui
Maybe next time talk and use words you.... *censored*
>:v
That was crap
olaf to gej